Is it possible to add a backlit keyboard to an hp envy touchsmart 15

is it possible to add a backlit keyboard to an hp envy touchsmart 15?

Daevid.
Yes you can.
Your manual here.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
Page 20 chapter 3.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

Keyboard issue in HP Envy Touchsmart

I just bought a new HP Envy Touchsmart with i74700MQ and windows 8.
I found that some keys are not working at all like key 6 in both (main keyboard and the numerical keyboard) however, key "5", key "\"and key "-" are not working in main keyboard only. I uninstalled ps/2 driver and reboot the laptop but I still have the same issue.
Can you help please?

Hi IMBABI, welcome to the HP Forums. If some keys are not functioning, you should start up in Safe Mode to see if the issue persists. Windows Startup Settings (including safe mode)
If it does, perform a hard reset and try to recreate the issue. Performing a Hard Reset or Forced Reset
If it still doesn't work, you will have to contact support for repair options: HP Technical Support, North America 1-800-474-6836. For all other regions click here.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can I buy a backlit keyboard for my HP ENVY dv7-7334ea? UK customer

I have just purchased and HP ENVY dv7-7334ea and have just realised that the keyboard is not backlit. Can I get a replacement keyboard for it in the UK to make it backlit?

banhien wrote:
Hi,
Keyboard alone won't light up, you need power from motherboard that means you may need a new motherboard too. Please check the following link to find compatible parts:
http://h10032.www1.hp.com/ctg/Manual/c03591253.pdf
Regards.
Hi Banhien,
His laptop: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03628173
Intel HM77 chipset has the slot for the extra cable on it, so he si fine.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Possible to add backlit keyboard after purchase? (dv3t)

Is it possible to add the backlit keyboard option once you've taken possession of the computer? (IOW, I like the dv3t notebook I have right now, I just wish I had ordered the backlit keyboard and want to add it now.) Thanks

Daevid.
Yes you can.
Your manual here.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
Page 20 chapter 3.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Replace the stranded keyboard with backlit keyboard

hi,
i want to replace my keyboard with a backlit keyboard on my hp envy touchsmart j040us. is it possible to do that ?

Pavan,
Yes it's possible.
Go through Page 22, 23 & 95 - 98 in this manual of your laptop for knowing which part number you've to order & search it through HP Part Surfer website or online stores : http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
Specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03820144
You might want to contact HP for replacement:
https://h22207.www2.hp.com/us-en/contact-hp/product/HP-ENVY-TouchSmart-15-j040us-Notebook-PC/model/E...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Has my T430s backlit keyboard????

Hi! I have just bought a second hand T430s thinkpad to replace my old T61.
I get it without HDD so, I've put the SSD of my T61 (with W7 installed). When I press fn+space it only lights thinklight, like in my old T61.
But, Is it possible my T430s had backlit keyboard bad the drivers are bad?
Product ID:
2356A35
Model:
2356
Thanks
T430s i5-3320M 8GB 250GB SSD LCD-HD+
Solved!
Go to Solution.

VTCop wrote:
Description: FRU CS12-KBD SWS LTN
How to know if it is backlited??
If it was backlit the description would read CS12 B/L KBD SWS LTN
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Backlit keyboard for dv7t-4100?

I need to replace the keyboard in my Pavilion dv7t-4100. Is it possible to install a backlit keyboard, i.e. is the backlight connector present on the motherboard on this model? If so, what is the part number for the backlit keyboard? I've heard of people installing backlit keyboards intended for other models.
This question was solved.
View Solution.

anshuman_ina wrote:
Can anybody tell me if there is an option for installing a new backlit keyboard on my hp pavilion dv6 7039tx laptop. Presently it doesnt have a backlit keyboard. I just want to know if it supports a backlit keyboard.
Hello anshuman_ina.
According to page 57 of your notebook's Maintenance and Service Guide (click here) there are backlit keyboards for this model. The guide has the part numbers listed.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP DM4-3050us backlit keyboard???

Anyone know if it's possible to install a backlit keyboard in the HP DM4-3050us.

Actually that statement is not true. I picked up the dm4-3050us from staples. It didn’t come with a backlit keyboard. I did my research and found on that works. I ordered it from hp. Installed it and it works GREAT with BACKLIT KEYS. The motherboard does support it … should do some research before posting.

[SOLVED] Add a custom keyboard layout in X

I'd like to discard QWERTY and start using Dvorak. However, I find it may be easier to accustom myself to Dvorak if I exchange its left-hand keys with right-hand ones.
So I want to create a custom keyboard layout. By inspecting /usr/share/X11/xkb, I found there are two methods to specify keyboard layout: by keymaps (seems to be deprecated) and by rules. Both methods will then determine and incorporate keycodes, types, compat, symbols, and geometry.
Of course I can directly modify existing configurations (for example, to change symbols). But these settings will be gone once I update the package xkeyboard-config.
Then my question is: Is it possible to add a custom keyboard layout in the user's home directory in a pluggable way?
Anything about how to add separate keyboard layouts in system folders (say /usr/share/X11/xkb) are also welcome so I can create a separate package which doesn't clash with xkeyboard-config. Thanks.
PS. I know xmodmap-based methods, but I prefer an original layout which can be loaded and unloaded with setxkbmap.
Last edited by cyker (2012-01-25 15:50:00)

If you use ext, For reference, // Colemak symbols // 2006-01-01 Shai partial default alphanumeric_keys
xkb_symbols "basic" {
include "us(basic)"
name[Group1]= // Alphanumeric section
key <TLDE> { [ key <AE01> { [ key <AE02> { [ key <AE03> { [ key <AE04> { [ key <AE05> { [ key <AE06> { [ key <AE07> { [ key <AE08> { [ key <AE09> { [ key <AE10> { [ key <AE11> { [ key <AE12> { [ key <AD01> { [ key <AD02> { [ key <AD03> { [ key <AD04> { [ key <AD05> { [ key <AD06> { [ key <AD07> { [ key <AD08> { [ key <AD09> { [ key <AD10> { [ key <AD11> { [ key <AD12> key <BKSL> { [ key <AC01> { [ key <AC02> { [ key <AC03> { [ key <AC04> { [ key <AC05> { [ key <AC06> { [ key <AC07> { [ key <AC08> { [ key <AC09> { [ key <AC10> { [ key <AC11> { [ key <AB01> { [ key <AB02> { [ key <AB03> { [ key <AB04> { [ key <AB05> { [ key <AB06> { [ key <AB07> { [ key <AB08> { [ key <AB09> { [ key <AB10> { [ key <CAPS> { [ key <LSGT> { [ key <SPCE> { [ include "level3 you can use "chattr +i filename" to stop the file from being modified - that way you can make sure your changes don't get lost on the update. I have put a colemak file in /usr/share/X11/xkb/symbols/ and can simply load it with "setkxbmap colemak", but I don't really know the magic behind layout settings.
my colemak file, with polish diacritics:
for xkb on X.Org Server 7.x
Coleman, http://colemak.com/ . Public domain.
"Colemak";
grave, asciitilde, dead_tilde, asciitilde ] };
1, exclam, exclamdown, onesuperior ] };
2, at, masculine, twosuperior ] };
3, numbersign, ordfeminine, threesuperior ] };
4, dollar, cent, sterling ] };
5, percent, EuroSign, yen ] };
6, asciicircum, hstroke, Hstroke ] };
7, ampersand, eth, ETH ] };
8, asterisk, thorn, THORN ] };
9, parenleft, leftsinglequotemark, leftdoublequotemark ] };
0, parenright, rightsinglequotemark, rightdoublequotemark ] };
minus, underscore, endash, emdash ] };
equal, plus, multiply, division ] };
q, Q, adiaeresis, Adiaeresis ] };
w, W, aring, Aring ] };
f, F, atilde, Atilde ] };
p, P, oslash, Ooblique ] };
g, G, dead_ogonek, asciitilde ] };
j, J, dstroke, Dstroke ] };
l, L, lstroke, Lstroke ] };
u, U, uacute, Uacute ] };
y, Y, udiaeresis, Udiaeresis ] };
semicolon, colon, odiaeresis, Odiaeresis ] };
bracketleft, braceleft, guillemotleft, 0x1002039 ] };
{ [ bracketright, braceright, guillemotright, 0x100203a ] };
backslash, bar, asciitilde, asciitilde ] };
a, A, aogonek, Aogonek ] };
r, R, dead_grave, asciitilde ] };
s, S, sacute, Sacute ] };
t, T, dead_acute, dead_doubleacute ] };
d, D, dead_diaeresis, asciitilde ] };
h, H, dead_caron, asciitilde ] };
n, N, nacute, Nacute ] };
e, E, eogonek, Eogonek ] };
i, I, iumlaut, Iumlaut ] };
o, O, oacute, Oacute ] };
apostrophe, quotedbl, otilde, Otilde ] };
z, Z, zabovedot, Zabovedot ] };
x, X, zacute, Zacute ] };
c, C, cacute, Cacute ] };
v, V, oe, OE ] };
b, B, dead_breve, asciitilde ] };
k, K, dead_abovering, asciitilde ] };
m, M, dead_macron, asciitilde ] };
comma, less, dead_cedilla, asciitilde ] };
period, greater, dead_abovedot, asciitilde ] };
slash, question, questiondown, asciitilde ] };
BackSpace, BackSpace, BackSpace, BackSpace ] };
minus, underscore, endash, emdash ] };
space, space, space, nobreakspace ] };
(ralt_switch)"

Is it possible to add reverb to vocal mic, without affecting my keyboard sound?

Hello,
I am trying to record my vocals and piano simultaneously. I'm using the MBox 2, with Adobe Audition 3.0. Whenever I add reverb to my vocal track (via the fx tab under my vocal track in multi track view), it affects the way my piano sounds while I am recording (it creates a delay on the sound of the keyboard while I am playing...almost like a 'bouncing note' delay). I really want to be able to hear some reverb on my voice while recording, but I cannot seem to figure out how to do it. This is how I have everything set up:
Piano is plugged in via DI on input 2 on the back of the mbox
vocal mic is plugged in via cannon on input 1 on back of mbox
If anybody could help, that would be wonderful. I've spent hours trying to figure this out with no luck. It is a lot more fun to record your singing with a bit of the pretty reverb....but my piano doesn't agree.
Thank you
Best,
Jenny Jo

Hello Brian,
Thanks for your help again. I have spent the last 6 hours running into nothing but problems. I tried your advice about recording mono in both separate tracks, and still no luck. I was using a condenser mic, and a keyboard. Both using mono, and I was using the studio reverb. I finally decided to try something simpler, just so I could at least feel a bit satisfied in getting a recording in. I set the condenser mic near my keyboard and speakers, and plugged my keyboard into the speakers. I armed the one mic track for record for phantom power, applied studio reverb, and set up the correct settings for the track by going into Audio Hardware Setup and selecting 'Asio Digidesign Driver' as the audio driver for everything. I simply wanted to play my piano, which would sound through the monitors next to me, and sing into the microphone..which would pick up my vocals with the piano in the background. The only way I could hear reverb on my voice during the recording, was by adjusting the 'mix' knob on the front of the mbox. It seemed to be working okay, and I thought I had found at least a compromise for the moment. But after saving the files, and upon listening to them...I noticed drops and rises/glitches/ in the recording volume. I then did a bunch of tests. I recorded some without any reverb assigned at all, did some recordings with the mix knob up and some with it off...I tried everything I could think of. I saved each one as a wav file, and MP3, just to see if that would affect the sound. Listening to them, they all have those same sound glitches. While doing the recordings, the sound disturbances weren't audible.
I am wondering if there is a setting that I need to fix...I am not the most savvy technical person, and am rather new to recording. Maybe the buffer size needs to be adjusted? I really have no idea...it is frustrating. I should say that I am using an MBox 2, which is supposed to be used with Pro Tools software. I had problems using Pro Tools as well, I don't think my OS is very compatible with it. Unfortunately, I have windows Vista, which I hear nothing but problems about in regards to recording. I prefer to use Adobe Audition, as I'm familiar with it, and like it.
Well, I hope this email hasn't put you to sleep. I really hope I can get this figured out, as I'm keen to record.
Thank you again..
Best,
Jenny Jo
Date: Tue, 2 Feb 2010 00:35:03 -0700
From: [email protected]
To: [email protected]
Subject: Is it possible to add reverb to vocal mic, without affecting my keyboard sound?
Out of some disbelief I had to try my own setup suggestion from above, since it's not a thing I do daily anymore. Without wanting to go into any dispute with the above poster, I can only say:
It works well here.
Your mileage may vary.
Setting up two mono tracks with a separate input to each, I was able to record vocals with reverb from Audition in my monitoring headphones, along with recording an electro-acoustic instrument (guitar in my case) on the adjacent track with no reverb at all. I sang/tested with lots of consonants and different monitor levels and reverbs; I used the Studio Reverb, which is the least CPU intensive and recommended in the manual. There was no noticable delay, echo, what have you, which I felt disturbed my precision at all. Now I KNOW technically there is a delay/latency, but for practical purposes it isn't noticable. I've also heard some singers are extremely pecky on this, and for them there is the solution of direct monitoring and an outboard reverb added to their headphone signal. For everyone else however it works well and the latency just a theory - certainly not an audible 'echo' of any kind. With a poor soundcard and a computer low on resources latency will become evident. Also if you don't use ASIO. This type of application is why we have ASIO.
>

Is it possible to updgrade G6-2313AX keyboard to a backlit one ?

Hi,
Is it possible to upgrade the keyboard of a G6-2313AX to backlit one ? I mean, do the motherboard have a connector for this ?
On other words, the up/down key size is ridiculous and difficult for gaming. So in case the baklit keyboard is not possible, can we be able to get a normal layout keyboard ( with the UP/DOWN keys with standard size )
Your replies are much appreciated

Hi AnoopAravind,
I understand your are looking to Turning a Backlit Keyboard On or Off. If you follow this document it should show you how to do that.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01612362
You could also check this Microsoft document for additional fixes.
http://windows.microsoft.com/en-us/windows/answers?tId=0110d32d-66c0-4ce7-8682-eeb896e80c3f
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

T430s and Backlit Keyboard FRU... is it possible?

Got my T430s today. Has the new keyboard BUT doesn't have the backlit feature. Hmm....
Is it possible to swap out the keyboard with one that does (like the one on the T430)? Does anyone have any experience and/or FRU that works? I loved the dual light levels and the backlighting better than the overhead option.
Cheers,
JIM
Solved!
Go to Solution.

Good day.
I don't know if the T430 keyboards are interchangeable with the T430s, but you could compare the FRU P/Ns found in each model's Parts Listing. Or, you could just source a T430s backlit keyboard using the appropriate P/N. The keyboards are CRU.
T430 parts: http://download.lenovo.com/parts/ThinkPad/t430_t430i_fru_bom_20130307.pdf
T430s parts: http://download.lenovo.com/parts/ThinkPad/t430s_fru_bom_20121227.pdf
T430s hardware maintenance manual: http://support.lenovo.com/en_US/detail.page?DocID=UM014461
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Possible to replace non-backlit keyboard with backlit one?

I have a w530 without the backlit keyboard, can I get a backlit keyboard and switch it over? Is the backlight integrated with the keybaord itself?
W530, 32GB ram, K2000m

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are trying to replace the notebook keyboard with a backlit keyboard if its possible
We will surely assist you with this issue
As far as I know its only the top end models have that premium backlit feature. This is a Envy notebook feature and
we cant have the same backlit keyboard on a entry level notebook. You should also know that Notebooks are not open architecture like desktops, we cannot mix and match parts just as they can with the desktop PC environment.
We need to check if backlit keyboard feature is listed for your notebook in the service and maintenance guide or not.
If it is listed there is a chance that you can go for it. Its just that the motherboard has to have the ZIF connector for the ribbon cable that provides power to the backlight.
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

HP DM3 Backlit Keyboard (580687-001)Can't add to cart

Hi,
I'm currently looking to purchase a backlit keyboard for my HP DM3-1132tx notebook.
I've located the part number on the HP Partsurfer site
http://partsurfer.hp.com/Search.aspx?SearchText=WR652PA
One problem. Why isn't there any checkbox for "add-to-cart"?
I have a shopping cart icon above but the page doesn't seem to have any control to add parts to my shopping cart.
I appreciate some help.
Thanks.
This question was solved.
View Solution.

http://www.pchub.com/uph/laptop/66-59949-15347/HP-Pavilion-dm3-Series-Keyboard.html
I have dealt with these people and I have had no problems, but even though your part number is correct, PC Hub does not show this as being a back-lit keyboard. I entered your part number and PC Hub substitutes with a different one. Very frustrating...
Here are a bunch from e-bay too and many ship world wide, but none show as being back-lit ???
http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=580687-001&_sacat=0
I am not sure what else to say here except to contact the vendor(s) and ask them if it's actually back-lit.

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

Is it possible to add a backlit keyboard to an hp envy touchsmart 15

Similar Messages

Maybe you are looking for