Is it possible to add new delivery schedule with bapi_change_po?

Hi all,
We're able to update PO existing line item and delivery schedule date with BAPI_CHANGE_PO. However we can't find any way to add new delivery date (under delivery schedule tab, in PO) for multiple delivery schedule scenario.
please advise is it to do so with BAPI_CHANGE_PO or we should try other approach to do it. Thanks.

Use the BAPI "BAPI_PO_CHANGE". New delivery schedule information can be filled in the structures POSCHEDULE & POSCHEDULEX.
poschedule-po_item = <item_number>
poschedule-sched_line = <new schedule Line>.
poschedule-delivery_date = <delivery_date>.
poschedule-quantity = <schedule quantity>.
append poschedule.
poschedulex-po_item = <item_number>
poschedulex-sched_line = <new schedule Line>.
poschedulex-po_itemx = 'X'.
poschedulex-sched_linex = 'X'.
poschedule-delivery_date = 'X'.
poschedule-quantity = 'X'.
append poschedulex.
Regards
Vinod
Edited by: Vinod Kumar on Apr 21, 2010 11:35 AM

Similar Messages

Scheduling Agreement New Delivery Schedule With & Without Proposal

Hi Experts!
I had an issue regarding our scheduling agreements. Issue is below:
What is the difference between "New Delivery Schedule WITH Proposal" and New Delivery Schedule WITHOUT Proposal"?
Any responses will be greatly appreciated and points. Thank you for your time!!
Best Regards,
WC

In addition to the above post,
as you changed the date manually from 2nd to 3rd....
so there are was no report for 2nd generated ulitmately...and if generated it was changed...right...
so when you again run the mrp...the system will generate one more pr for the same article....
this ultimately happens because of the set del dates in the MMR as i told above..
Hope it helps..
Regards
Priyanka.P

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

Is it possible to add new screen fields to the transaction /dsd/sl_cockpit

HI experts,
Would like to know if it is possible to add new screen fields to the cloned version of /dsd/sl_cockpit.
I cloned the original transaction /dsd/sl_cockpit into a diff. name, now I want to know how I can include/ add those new fields to this transaction. It looks like the screen is dynamically built using Standard ABAP classes. Need help.
Thanks in advance

it is not possible to add new fields via badi on /dsd/sl_cockpit.

Is it possible to add new character set encodings?

Hello,
is it possible to add new character set encodings in Mac OS?
Practically, i need to add "Russian (DOS)" encoding to Tiger, but is it at all possible even in newer versions of Mac OS?
Where to find the missing encodings and how to install them?
Google search did not return much.
Thanks.

Well, it was a general question about possibility of adding new encodings in Mac OS, but i posted a more specific question about Tiger here:
http://discussions.apple.com/thread.jspa?threadID=2692557&tstart=0
On Tiger i do not have Russian (DOS) in TextEdit, only Cyrillic (DOS).
The same about TextWrangler on Tiger.
Strangely, i have Russian (DOS) in TeXShop on Tiger.

If is possible to add new local var to sequence from the outside?

If is possible to add new local var to sequence from the outside?
I mean insert a new local variable to Sequence.Locals list or via expression, or by LabView VI (Sequence Context). or any another way.
Thanks.

Hi,
The simplest way would be to use the API TS method PropertyObject.SetValBoolean, PropertyObject.SetValNumber or PropertyObject.Set ValString. With the SequenceContext you create a PropertyObject using the method SequenceContext.AsPropertyObject, which you use as the reference for the the SetVal method.
For the SetVal method, pass the full lookup string of your variable eg "Locals.MyString" and set the option parameter to 0x01 (insert if missing).
If you are calling this from LabVIEW, then use the SetVal property VI.
This will insert a varable into the Locals that is "in scope" of the step that is performing the task.
In the TestStand Help - "Using the API in Different Programming Languages" and in the TestStand User manuals there is more information to help you.
This will only make a runtime version of your Local. ie when your sequencefile stop executing your Local will not exist in the Static version of the Sequence File.
Hope this helps
Ray Farmer
Regards
Ray Farmer

Multiple delivery schedule (with same delivery date) for same PO line item

Hi All,
In a STO, for a PO line item say for 10 quantities. I have been receiving 3 delivery schedule with the same day with quantities say 5 3 2. I would like to know the what would be possible reasons for this.
Regards,
PSS

Hi PSS,
I had the similar issue there is a report which gives you the reason for delivery split
Please refer to the following thread
Multiple deliveries created
Thanks
Diwakar

Delivery schedules with outline purchase agreement

Can somebody tell me how to automatically result delivery schedules with outline purchase agreement through MRP running？

Priyanka.P thanks for your reply.
The following is how I process:
1.I use auto po indicator at VMR
2. I tick Auto PO indicator and source list indicator at MMR
3.I have made schedule agreement(type LP) and assign it in source list as fix vendor(1000) and with the MRP indicator 2(Record relevant to MRP Sched. lines generated automatically)with the proper validity periods in IDES.
4. In MD03, I use the create schedule as 3
5.There is Dependent reqmt.
When I finish my MRP running I find a Purch.Req with Exception 30( Plan process according to schedule (08.11.07/08.11.06)) generated. however I hope a vendor Delivery schedule.

Add new Delivery cost to PO with partial goods reciept !!!!

Dear all,
i have a strange case in my company, sometimes after our requested goods delivered to our country it stay in customs and we reciept only what had customs released and the remain goods will be reciept in the next month + additional cost for rent of the place in the customs, i need to add the additional cost to the remaining items in the PO.
let have an example. is SAP
i create a PO for 100 items with the right conditions, when the goods landed in the customs they release only 10 items so i make a GR/IR for 10 items only , after a month they release another 10 items . i need to make a GR/IR for these items with additional cost for the rent of the place in the customs.
how can i do it because when i try to add delivery cost in the PO it issue this error "You cannot enter new delivery costs"

Hi,
It's not possible to add delivery cost once GR or invoice has been posted. It's documented
in SAP note 457511-question 6.:
6. Is it possible to change or add delivery costs in the purchase order
after a goods receipt or invoice receipt has been executed?
Answer:
No, this should not be possible. The system generates error message
V1631 'You cannot enter new delivery costs' (V1631). Important: If your
system does not behave in the manner described, this is an error that
can be corrected using Notes 187694 and 196884. This affects the earlier
Support Packages of Release 31I, 40B, 45B and 46B (you will find more
detailed information in the two notes mentioned).
Thus you can only close the item by setting delivery complete indicator and then create a new
item and add the delivery cost.
Thanks and regards,
Polly

Is it possible to add new line to existing Blanket Agreement through interface?

Hi All,
I need to add a new line to exisitng list of blanket agreements.
I populated po_headers_interface and po_lines_interface and ran 'Import Price Catalogs' program.
But this is only trying to update existing line instead of creating a new one.
Please clarify whether it is possible to add just a line using the above process?
tried multiple scenarios:
action field in both tables - ORIGINAL - error, doc already exists.
action field in both tables - UPDATE - updates existing line.
action field - (UPDATE in hdr and ORIGINAL in line) - updates existing line.
Thanks in advance.
Girish

Hi All,
It's working now. populated action field as 'ADD' in po_lines_interface and it created a new line.

Is it possible to add new tags after i accidentally deleted some?

I was renaming all the new coloured tags on my MacBook and i accidentally deleted some of the tags. I now dont have enough for all my different subjects but can see no option to add new tags, is it possible?

What I've done to create new tags from scratch is to create a throwaway text file called "tag test" (or something like that) and temporarily place it on my Desktop for easy access. Then, in Finder, I select the "tag test" file and click the "Edit Tags" icon in the toolbar at the top of the Finder window. (The "Edit Tags" icon looks like a horizontal switch.) From there, you can create a brand-new tag (say, "Tag 1"). After you press Enter, "Tag 1" will appear in the Tags list in the Sidebar. Two-finger click "Tag 1" in the Sidebar, and from the contextual menu, select the color you would like to apply. (You may also rename "Tag 1" to something else if you choose.)
Repeat this process as many times as necessary in order to recreate all the tags you'd like -- and then delete the "tag test" file.
Hope that helps.

Is it possible to add new language in General Setting?

Hi all,
I would like to add new language ("Cambodia[Khmer]") in General Setting in SAP and when i select that language, the system auto translate to khmer.
Is it possible to do that? if yes, can u tell me how to do?
Thanks
TONY

Hi Soeun,
You need to have S-User Id and password to open the link, Edy suggested. Still, I am sharing the Note with you:
Symptom
SAP Business One is currently available in 27 languages. While SAP may continue to increase the number of supported languages over time, it is not feasible to satisfy all possible demands.
Solution
The SAP Business One strategy is to empower its partners to take responsibility for the translation of the user interface (UI) into other languages, as needed.
To support this process we have added a new tool to the Installation and Upgrade package.
The Custom Language Tool (CLT) file 'CLT.zip' is located in the folder 'Packages' in the Installation or Upgrade packages.
It enables partners to:
Define an additional UI language
Generate a UI string source file to be translated into the new target language
Upload the UI string target file in the new language to SAP Business One
Make the new language available to SAP Business One users
For more information, see the 'User Guide - Custom Language Tool.pdf' contained in the package.
Thanks & Regards
Ankit Chauhan

Is it possible to add new mappings for SRM?

I am looking to replicate some of the "Request for Quotation" creation/management functionality from SRM in a custom application (for business/technical/ease-of-use reasons) and send the created RFQs over to SAP SRM. Can I use XI to send RFQs into SRM (I know I can retrieve them using XI for custom supplier apps, but can I send them in as well)?
While reviewing the EBP mappings in Integration Builder, I see there is a mapping for RequestForQuotation_Create_Out, but not for RequestForQuotation_Create_In. Is it possible to add this mapping? Or in other words - is it possible to create new mappings for SRM in XI that are in addition to the standard mappings that are shipped with SRM/XI? 
Thanks for your help in advance.

Hi Osvaldo,
I see there is a mapping for RequestForQuotation_Create_Out --> I dont think you can find a mapping for the same. RequestForQuotation_Create_Out should be the name of the interface(outbound). What it means is you can have your own custom defined inbound interface and perform the mapping on your own in a new SWC. Pls update me if you can see a mapping for the same. Also you can have yor own interfaces and mapping in your SWC apart from the standard as suggested by Bhavesh and Abhy.
Take care while desingning the interface for SRM part coz SRM has the ability to output in XML format. Check this functionality first and start designing your interface.
Update us if you have more querries.
Regards,
Jai Shankar.

In IMovie11, is it possible to add a menu page with options such as PLAY, SCENES, TRAILER, etc

In IMovie11, is it possible to add/create a menu at the beginning of the movie with options like PLAY MOVIE, SCENES, TRAILER, etc..

*I found a solution. HP owes me $20,000 in consulting fees.*
To print to a LaserJet 3600 or 2600 from a newer Mac using 10.6, you must do the following:
Step 1: Install Foomatic HPIJS drivers
Step 2: Get an AirPort Express or equivalent print server
Step 3: Connect the printer via USB to the print server, and connect
Step 4: Go to Print & Fax, then click the + button to add a printer
Step 5: Select HP Jetdirect - Socket for the protocol
Step 6: Enter the IP address of the printer server, followed by a colon and the port number (9100 or 9101)*, i.e. 1.2.3.4:9100
Step 7: Name the printer, then click on the Print using: drop down menu
Step 8: Select the Select Other Printer..., and choose the appropriate HPIJS driver.
* To determine the correct port, open Network Utility in the Utilities folder. Click on Port Scan. Type the IP address of your print server, then check the Only test ports between... and enter 9100 and 9101. It will report back the open TCP port.

Cannot add a delivery note with an item with serialnumbers via DI Server

I'm using a web service to add delivery notes via DI Server. my code works for items that do not need serialnumbers or batchnumbers and even for those that need batchnumbers.
but if I try to add an item with serialnumbers, I'm getting the following error:
[DLN1.WhsCode][line: 0] , 'Item 'A00004' with system serial 0 is not in stock.'
in the soap request I put the InternalSerialNumber, Location and BaseLineNumber. Because the error message tells me something about system serial, I've also added the SystemSerialNumber to the soap request. But then I'm getting another error:
Failed to execute command.
does someone know, what I'm doing wrong?

Hi,
i'm getting the same error when trying to add a delivery/invoice.
"[INV1.WhsCode][line: 0] , 'Item 'xxxx' with system serial 2 is not in stock"
its started just after upgrade to 2005 SP1 PL4 and i tried to upgrade to PL7 with no success. do someone else have the same issues?
thanks
Moty

Is it possible to add new delivery schedule with bapi_change_po?

Similar Messages

Maybe you are looking for