Is it possible to assign a particular font to a table?

I am building an archaeology-related database and have to store representations of cunieform tablets in a table.
The glyphs used to represent Akkadian and Bablylonian cunieform are non-alphabetic and are obtained from either a U of Chicago font or a middle-eastern font.
The table containing the tablet information would need to be able to use one of these two fonts, I believe. The rest of the
database would use standard fonts.
Is it possible to assign a font to only a single table? is there some other way I can represent the cunieform?
One of the requirements is that the cunieform must be queriable so I can't use bit-maps.
Thanks in advance for any suggestions or pointers to where I can find information about solving the problem.
George Sundell

A follow-up to my original message. I have been reading the Globalization Manual. It seems that my solution possibly should be to use Unicode datatypes.
It seems as if the only way to do this is via specifying the Unicode font as the National Character Set and it appears that Imust choose AL16UTF16.
I have learned that a new Unicode font set incorporating the characters for the Akkadian, Sumerian, etc. transliterations is in preparation.
Would it be possible to substitute the new font for the AL16UTF16 one? If so, can someone point me to the documentation on how to accomplish this?
Many thanks.
George Sundell

Similar Messages

  • Is it possible to assign user-defined data elements to table control?

    Hi SDN,
    Is it possible to assign a user defined data element other than basic data types in table control column.

    Hi Suresh,
    In Screen layout,In element list tab,i am not able to give the user-defined data types other than basic data types?please tell me how to give other data types

  • Locking a particular row in a table control

    Hi All,
    I have module pool program in which table control is used. I would like to know whether it is possible to lock a particular row in the table so that another person will not be able to edit it until the first user completes his work. It should be only for that particular record which is being currently edited in the table.

    Hi,
      Yes you can lock particular row in a table control..
      In the flow logic..
    PROCESS BEFORE OUTPUT.
      LOOP AT itab INTO wa WITH CONTROL tc.
         MODULE disable_row.
      ENDLOOP.
      MODULE disable_row.
    * call the Enqueue function module..If the
        IF sy-subrc NE 0.
          LOOP AT screen.
               SCREEN-INPUT = 0.    " Disable for input
               MODIFY SCREEN.
          ENDLOOP.
       ENDIF.
      ENDMODULE.
    Thanks
    Naren

  • Is it possible to sort rows by font color in Numbers ?

    Is it possible to sort rows by font color in Numbers ?

    CC,
    You probably had something in mind when you applied the colors to the text. It's always best to record the conditions directly rather than to indicate them indirectly by by use of color.
    You can use Conditional Formatting to do some color coding based on the condition. You might even find that it's easier to let the conditional format tool than to assign the colors manually.
    Jerry

  • Start Workflow from particular Step and assign to particular group of members

    Hi
    We are working on workflow using CQ 5.5.
    Is it possible start workflow from particular Step and assign this workflow to particular group of members dynamically(Using Process Step).
    Workflow Name : Single Page Workflow
                        Start
                            |
                        Step 1
                            |
                        Step 2
                            |
                        Step 3
                            |
                        Step 4
                            |
                        Step 5
                            |
                        Step 6 (Process Step)
                            |
                         End
    In Step 6 , we will start workflow for list pages dynamically , for that we written code as
    public class PublishTranslation implements WorkflowProcess{
        public void execute(WorkItem item, WorkflowSession wfsession, MetaDataMap metadata)
                throws WorkflowException {
               WorkflowModel  model = wfsession.getModel(item.getWorkflow().getWorkflowModel().getId());
               WorkflowData wfdata= wfsession.newWorkflowData("JCR_PATH",pagePath[i]);
               wfsession.startWorkflow(model, wfdata);
    This code starting workflow from step 1.
    I need help on
    1. How can i start workflow from step 2 or 3 ?
    2. How can i assign this workflow to group members ?
    Thanks & Regards

    Hello Ravindra,
    Logically it shouldn't allow you to do that and same happening because start workflow call on model will always trigger the workflow from starting point (means the very first step after start component in workflow design)
    To achieve this you have other ways, i would suggest to try below if it works for you.
    1. Instead of creating a new workflow just branch it programmaticaly and route back to previous step
          List<Route> routes=wfsession.getBackRoutes(item);
                     Route route=routes.get(WHAT_EVER_STEP);
                     wfsession.complete(item, route);
    2. Create a new workflow model which starts from second step and using code get access of that workflow
         wfsession.getAllWorkflows();
    for delegation as mentioned by Yogesh, you can try wfsession.delegateWorkItem(WorkItem item, Authorizable participant)
    Thanks,
    Pawan

  • Events assignment to particular users in LMS 4.2.2

    Hi,
      Is it possible to assign events that are raising in LMS to particular users .
    Is it possible to track the events in LMS 4.2

    Hi ,
    You need to define operations and collector to achieve your goals.
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/navigation/Guide/lms42_nav_guide/ipmtask.html#wp1076863
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-adhocdvmg.html
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-collectors.html
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-operations.html
    Thanks-
    Afroz
    **Ratings Encourages Contributors ***

  • Microsoft Word and Excel crash on printing in a particular font

    I am trying to print in word using a font called "Rupakara". I'm using this font because I want to print the Indian rupee symbol. But when print using this font word crashes. Even if I try to print alphanumeric characters in this font , word crashes.
    The same is true for excel.
    MS Word Version: 2007
    Printer model: HP 1510 All-in-one Series
    Can I know the reason why this happens only for this particular font?

    I'm also suffering the same issue. I checked the Mime Types in ifsmgr but they appear to be correct.
    I'm a little bemused as to the cause.

  • Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file  on the  left side

    Is it possible to get the style, font and related info of a paragraph text  of a in design file and write  all the stuff on the same in design file  on the  left side with small fonts 
    as
    Lets  this is a text in in design file    :
    style : abc                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu
    style : xyz                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu

    Hi Poojith
    Not sure if this would solve your requirment but just in case might be helpful:
    1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
    [http://www.sapdesignguild.org/resources/htmlb_guidance/]
    2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
    Thanks
    Deepak

  • IS IT POSSIBLE TO RESTRICT A PARTICULAR MATERIAL GROUP FOR A USER

    Hi Gurus,
    I want to know whether it is possible to restrict a particular material group for a particular user.
    e.g Material Group : 101
    User : ADMIN
    Our requirement is that the user should not be able to select material group 101 in
    any stock related transactions. e.g MB5B, MB51, etc.
    Thanks
    Amol

    Hi Amol
    You ca try Tcode OMT3E where in u can maintain settings relatesd to Users.
    Regards

  • Is it possible to assign a default value to an out parameter??

    Is it possible to assign a default value to an out parameter??
    Thanks in advance.

    pradeep.vupala wrote:
    I think ur looking for an IN OUT parameter?That won't help.
    A quick test is easy to check what happens :
    SQL> create or replace procedure myproc(p_out out number default 1)
      2  as
      3  begin
      4  null;
      5  end;
      6  /
    Warning: Procedure created with compilation errors.
    SQL> show err
    Errors for PROCEDURE MYPROC:
    LINE/COL ERROR
    1/18     PLS-00230: OUT and IN OUT formal parameters may not have default expressions
    SQL> create or replace procedure myproc(p_out in out number default 1)
      2  as
      3  begin
      4  null;
      5  end;
      6  /
    Warning: Procedure created with compilation errors.
    SQL> show err
    Errors for PROCEDURE MYPROC:
    LINE/COL ERROR
    1/18     PLS-00230: OUT and IN OUT formal parameters may not have default expressions
    SQL>

  • Storage type to be assigned to particular storage location

    Hi,
    As per clients new business requirement, 2 storage locations of a plant are assigned to same warehouse.
    But as the storage types comes under warehouse they come under both the storage locations. Is there any configuration to assign specific storage types to a particular storage location.
    I tried in SPRO under interfaces>IM>Storage location control but it does not allow.
    Please advice.
    Regards,
    Pratap

    Hi,
    I feel the solution given by E060123 in his first reply should work well.
    Did you first define the storage location refernce and then in the same config node under "Control of Assignment "Plant / Stor.Loc. - Whse Number" assigned the sloc reference to the respective storage location
    And then assigned the reference to the search table as mentioned previously.

  • PDF Form in Particular Font 2

    I need to create a PDF-form with a particular font. I already embedded the font when exporting from InDesign and set the "Subset fonts..." to 0% as advised to in this link:
    http://forums.adobe.com/thread/426831
    However when I try to choose the specific font (Melior), I get this error-message:
    "The selected font has a custom encoding and cannot be embedded ind the PDF-file because of licensing restrictions. (...)
    To avoid this situation, use a font that can be embedded in the PDF file, a font that does not have a custom encoding or a font that is known to be on all systems where the PDF file will be viewed."
    What can I do?
    Thanks for your help!
    C

    Thank you, that was what I needed.
    So now I know the test PDF document use only TrueType fonts. That means its content should be indexable for TREX but it isn't. There is just message "No document excerpt available" for this document in search results.
    Could someone look at the document and try to index it? It can be downloaded from http://www.volny.cz/kabrtz/TREX/indexing_test.pdf
    Regards,
    Zbynek

  • Particular font for entire pdf document

    Can i set a particular font for entire pdf document while designing pdf forms in LiveCycle Designer ES?
    How can i do it?

    Each object has its own settings for font. You can set the object to the font that you want and then drag it back onto the palette. It will ask you to overwrite the current one. As you drag the object back into the drawing area the new font will be used. This is true aof all properties of the object and not just font.
    This is useful if you are creating a new form, but if one already exists then the easiest way is to open the XML source (right mouse click on the Design tab and choose XML source. Use the search facility to find all occurances of typeface and chnage each one to the font that you want. Save the XML and then all objects will have the same font.
    Make sure that you make a backup of th eform before you play with the XML. There is no undo once the cahnges are committed.

  • Is it possible to assign get parameter Id to a field which having drop down

    Hi ,
    Is there any possibility to assign paramter id to a field which having dropdown ?

    hiii
    yes you can assign parameter id to a field which is having dropdown.assign it same way by using GET SET parameter ID.
    regards
    twinkal

  • Possibility to assign a color profile in the color management tab for more video formats

    Presently, in After Effects CS5, in the color management tab of the "Interpret Footage" dialog box the possibility to assign a color profile to footage is grayed out for many video formats.
    Formats that allow to assign a color profile include Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation as well as various image sequences, like tiff-sequences. (Motion JPEG A,B and Quicktime/MPEG-4 are not very helpful in this context because they have a small color shift when reimported to After Effects.)
    Formats that do not allow to assign a color profile include Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V. (Here, H264 main concept has anyway the disadvantage that it has a color shift when reimported into After Effects.)
    In After Effects CS4 it was possible to assign a color profile to Quicktime/H264, Quicktime/PhotoJPEG, DVCPRO HD 1080p30, but in CS5 this is no longer possible.
    Those video formats that do not allow to assign a color profile automatically are interpreted as having the color profile HDTV (Rec. 709) Y'CbCr in case that the videos have 1920x1080 format; similar applies to PAL formats which get SDTV (Rec. 709) Y'CbCr color profile.
    (I did not find anything of this automatic assignment to HDTV or SDTV color profile in the "interpretation rules.txt" file, therefore it must be written into the programme itself.)
    With growing popularity of wide gamut monitors it becomes necessary to produce footage and other videos that have a color profile different from HDTV or sRGB. When such footage is reimported to After Effects it has the wrong color and the only workarounds are either to use (in After Effects) the effect "Color profile converter" which necessitates extra render time or to use somewhat unpopular formats, like JPEG2000 that has very large filesize.
    Presently many footage is produced in Quicktime/PhotoJPEG and therefore it would be very desirable to allow to assign a color profile to such footage in the color management tab of the "Interpret Footage" dialog box.
    Does anyone know why in AE CS5 the video formats Quicktime/PhotoJPEG and Quicktime/H264 do not allow to have an arbitrary color profile assigned (although it was possible in CS4), is it a bug, or does it have a deeper reason.
    In this context I have a related question, often I read that Quicktime videos have a gamma tag. Does this mean that part of the color profile (the gamma value) is actually embedded/remembered, like you have it for images where the gamma is part the embedded color profile.
    I use AE CS5 on Mac Pro 2009 with OS 10.6.7.
    Thanks,
    Volker

    Thank you Rick for this interesting explanations and the links to articles.
    In the past few days I performed a few tests in After Effects and it is interesting that you mention that cameras, like the Sony EX3, allow videos to have embedded color profiles. I am not working myself with cameras but either get footage from the internet or sometimes videos from our video department which produces videos with professional SONY cameras, usually I get them in a matrox mxf format.
    As far as my test with After Effects show it is not possible to embed color profiles in the videos rendered with After Effects. Independent of the color profile in the working space and independent from the color profile in the output module I always get the same reaction if I reimport videos rendered by After Effects back to After Effects:
    In AE CS5 videos made in the formats Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V  are always interpreted as color profile SDTV/HDTV (Rec. 709) Y'CbCr (even if I made them in other color profiles, such as Adobe RGB, Photo RGB, sRGB); and there is no possibility to change this interpretation rule.
    In contrast videos made in the formats Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation are always interpreted as sRGB (even if if I made them in other color profiles, such as Adobe RGB, Photo RGB, HDTV); only this time I can change the interpretation rule. Therefore if I know for example that if I had selected Photo RGB in the Output module I can change after the reimport the interpretation rule from sRGB to Photo RGB and only then I get again the original colors.
    The only exceptions are picture sequences, such as tiff-sequences, where the original color profile is automatically selected in the interpretation of the footage.
    Therefore, unfortunately for videos produced by After Effects your advice "If it says something like sRGB and you can change it, in most cases you shouldn't change it because the guess is probably right. If there is no color profile assigned then you should assume that is correct." is not so easy to be applied. You have to know how you did it originally in the Output module and hope that you can change it to the proper color profile, in case that the original color profile in the Output module was different from sRGB and HDTV/SDTV. But it is interesting to hear from you that with cameras there seem to be more possibilities.
    For this reason it would be nice if in future versions of After Effects one could change the color profile in the the color management tab of the "Interpret Footage" dialog box also for formats such as Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V.
    Of course one can always circumvent shortcomings by using tiff-sequences, QT/jpeg2000, or QT/Animation as formats for storing, which is anyway better for lossless or nearly lossless storing, but the files are then too large and also cannot be played easily with a player.
    Volker

Maybe you are looking for