Is it possible to associate a condition to authentication

What I am trying to do is, authenticate only if a particular attribute say Field1="fine", basically trying to avoud a search,and then attribute, It there a way to do in one shot ? Thanks

Chandra,
I think you may need to explain in a bit more detail the effect you are trying to achieve.
However, if you are simply trying to block some user's accounts, thus preventing them from binding (ie. authenticating) to the Directory Server, then you can do this using the "Account inactivation" or "Password Policy" functionality of iDS. This functionality is documented in the iDS admin guide.
Rob.

Similar Messages

Is it possible to apply a condition on a single column?

Morning All,
Is it possible to apply a condition on a single column? My aim is to create a report that has multiple PTD columns, each based on a different Version ID.
I've tried creating a calculation using the case statement shown below, however I get a blank column with nothing in: CASE WHEN VERSION_ID = ‘10’ THEN BALANCES.PTD END
I know this can be done through a DB view/custom folder, however I’m looking for a solution that can be created in Desktop / Plus.
Cheers,
Lance

OK. Hope this explains the problem well.
This is the Crosstab Report without Annual Budget Column which looks great, all figures correct.
http://vodashare.com/show.php/2929_Pic1.jpg
After Adding Annual Budget column,
http://vodashare.com/show.php/2930_Pic2.jpg
This is the Table version of the above report with Annual Budget column
http://vodashare.com/show.php/2931_Pic3.jpg
Calculation Used for Annual Budget is
SUM(( CASE WHEN ( ( Actual Flag = 'B' ) AND ( Status <> 'C' ) )
THEN ( NVL(Period To Date Cr,0)-NVL(Period To Date Dr,0) )
ELSE 0 END ))
OVER(PARTITION BY Account,"Period Year" )
According to the conditions ( Actual Flag = 'B' ) AND ( Status <> 'C' ), amount is calculated adding the (Cr – Dr) amount when these conditions are satisfied. But, How can I make sure the value is displayed only for rows that these conditions are satisfied?
As you can see, it also displays the columns where Actual Flag != 'B' and Status = ‘C’
Also, I wonder why the Crosstab worksheet with Annual Budget doesn’t display some of the amounts (Ex: for Account 301010, no Annual Budget is displayed where as in Tabular worksheet it is $5721017.50) and for the amounts displayed, why are they displayed at different levels of Sub Accounts?
Note: I do get a warning when I Add the Annual Budget to worksheet.
'You are combining a detail data point with an aggregate data point This may give you unexpected results'. But I am not using any detail items as data points.(not considering Status and Actual Flag, got same message even after removing those)
Please let me know if you find a solution for your requirement Lance, that would help me.

Not possible to determine a condition type for the price in ME49

Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
Utsav

Hi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha

TRM: Is it possible to associate a profit center to a contract?

Dear all,
While inserting contracts representing bank loans using TRM we are dealing with a problem, since we have the document splitting functionality active we are obliged to associate a profit center to each movement. But we cannot find a way to fill the profit center information at the contract in TRM, so, there is no way to identify the profit center to use in accrual movements for example. It must be possible to associate a profit center to each loan created at TRM. How could we solve this error?
Thanks in advance,
Daniel

Hi,
In TRM deal you enter characteristic field profit center or cost center and in spro
General Settings
Accounting
Link to Other Accounting Components
Enhancements in the Posting Interface
This is user exit and in this node you enter abap coding so deal wise profit center / cost center populate.
Sound option you enter abap coding in FI user exit.
Vishal

Is possible to add 2 conditions in a view that is used from an extractor?

Hi alls.. that´s my question:
Is possible to add 2 conditions in a view that is used from an extractor?
I have an extrator in R/3 that´s a table view, so i want that this filter from 2 differents fields when this has the same value.
For example:
filter when FIELD1 = ZZ or when FIELD2 = ZZ .
..different fields, but the same type of data and value!
is it possible?
When i trying to activate the view, then show me an error that this is impossible to do.
Help me..please!!!
TY

The error is :
Only be able to 'OR' connects for the same fields.
You are trying to connect with 'OR' select conditions from differents fields.
(sorry but the sistem is in another language ---> not english)

RFQ - Header Condition (Not possible to determine a condition type)

Hi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type"
Regards

Hi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type" and now allowing me to enter the condition on header level.
Regards
Edited by: Kashif Ihsan on Jun 14, 2010 3:52 PM

*Is it possible to put service conditions in sub contract PO?*

We are giving an Item X for servicing to a vendor. The vendor can do to 2 services S1 and S2 to the item X and give it back.
For this we made a recursive BOM with item X and created a sub contracting PO.
But the problem is we are already having service master and SERVICE conditions for S1 and S2. The vendor needs to charge on the basis of these service conditions.
Example:
Item is TOOL-X.
Service1 and condition: Polishing. 25 INR / each.
Service2: and condition: Plating. 8 INR/ sq.mm
As we need to keep account of items given to Vendor (sub-contractor), I selected item category L. But here I cannot put service conditions? Is it possible to put service conditions in sub contract PO?
If I go for item category D (service) I will not be able to account for materials given to subcontractor.
Please suggest how to reflect this scenario in PO.
Ganapathi

Hi
It is always advisable not to put servicable materials in subcontracting.The reason being, every service would add value to the same material ( MAP will change) .If the material undergoes service many times then the Inventory value of the material will be Inflated.Hence to avoid this follow the steps
1) Create a service PO against the vendors
2) Issue the material via MB1B 541
3) Recieve the material through MB1B 542
4) Enter service entry sheet via ML81N
5) MIRO for service vendor
Regards
Sandeep

Is it possible to associate a song with more than one album?

I have a number of duplicate songs as a result of owning both an artist's album and compilation albums. Where they are identical I would like to associate the song with each album keeping only one version but allowing the song to play within the either the artist's album or the compilation. Is that possible without using the playlist option?

Can't be done.

Is it possible to associate two iTunes accounts with 1 mac?

My wife and I both share an iMac but have seperate user accounts. Each account is linked to different iCloud accounts. My wife recently purchased an album on here iPad and was wanting to download it to our shared mac but was unable to as her account was not associated with the mac and we couldn't associate it as I had only recently reassociated mine.
Any way that both can be associated with the same mac to allow past purchases to be downloaded?
Thanks

Is it possible to get an answer to a question around here? At least respond that, "We don't know and we'll get back to you."

API/RAS - is it possible to remove suppress condition formula from report Section?

I need to modify a report on the fly so that sometimes the 'Suppress (no drill down)' condition formula is completely removed from a report Section. Optionally I would like to just modify the formula to return FALSE so that the section appears.
It seems like the code below works when the section format 'EnableSuppress' option is TRUE, but does not seem to do anything when there is a suppress formula for the section.
Is this possible to do?
Thanks
Helen
private void RemoveSuppress(CrystalDecisions.ReportAppServer.Controllers.ReportSectionController ctlSec
    , CrystalDecisions.ReportAppServer.ReportDefModel.Section sect)
    CrystalDecisions.ReportAppServer.ReportDefModel.ISCRSectionFormat
secFmt = new CrystalDecisions.ReportAppServer.ReportDefModel.SectionFormat(); // also tried getting the current section format object
    secFmt.EnableSuppress = false;
    secFmt.ConditionFormulas.RemoveAll(); // *** Should ensure the condition formulas are removed correct?
    ctlSec.SetProperty(sect, CrystalDecisions.ReportAppServer.Controllers.CrReportSectionPropertyEnum.crReportSectionPropertyFormat, secFmt);
private void doOutput(CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument oras)
    CrystalDecisions.ReportAppServer.Controllers.ReportSectionController
        sect = oras.ReportDefController.ReportDefinition.FindSectionByName("DetailSection1");
    RemoveSuppress(oras.ReportDefController.ReportSectionController, sect);
    CrystalDecisions.ReportAppServer.CommonObjectModel.ByteArray
        boByteArray = oras.PrintOutputController.Export(RASDefModel.CrReportExportFormatEnum.crReportExportFormatPDF, 1);
    boByteArray.Save(@"c:\temp\r.pdf", true);

Hi Helen,
Not sure why or how I missed this one but see this post for more info:
http://scn.sap.com/thread/3712393
Don

Possible to associate one local hostname with two local addresses?

I'm trying to set up a backup system for our LAN. Several of the programs involved (e.g., rsnapshot) have their configuration based around what they recognize as the hostname of the other end. It's easy enough to set the local hostnames as I like, either in /etc/hosts or in /etc/ssh/ssh_config.
BUT the issue is that some of my machines might have different IP addresses depending on whether they're connected over wire or wifi. (Sometimes both connections are up; then wire should take precedence.) And some of the services I'm setting up (again, rsnapshot is an example) have the server initiate the connection to the client. (At least, it's what I think of as the server: the machine with the static wired LAN connection that the backup storage is kept on. The machines being backed up are the ones whose numeric IP isn't stable.)
Again, this is all inside a LAN. The IPs involved are all 192.168.*.* stuff.
How do I get the server to know what IP a given host, e.g., "wifeslaptop", has? If it were just a matter of a single network card, e.g., only wifi connections, then the router is already able to assign it a fixed local IP. But wifeslaptop might (instead or additionally) be connected by wire, too.
I see five possible strategies for solving this.
1. Is it possible to get the server to associate two numeric addresses with a single hostname? So that it recognizes both as instances of "wifeslaptop", and I guess if it wants to initiate a connection to that host, it tries the first numeric address then the second if that fails? Is it possible to do this simply, or does it require installing some kind of extra server/daemon?
2. Failing that, I guess I need to wrestle with our router to try to get it to assign the same numeric address to the wired or the wifi connection, and ensure that both connections are never active at the same time.
3. Or I've got to set up some kind of local dynamic dns system, so that my server can look up "wifeslaptop" and discover what LAN IP address it has.
4. Failing all of that, maybe I need to instead dynamically generate the config files for the services I'm trying to use. E.g., before running rsnapshot, the server could ping the two numeric addresses wifeslaptop might have, then generate a rsnapshot config file on the fly associating the address which is present with the (single) backup store it keeps for wife's laptop.
5. Or maybe simplest yet, if it works, I could (either with symlinks or with mount -o bind) let rsnapshot THINK there are two backup stores, one for each version of wifeslaptop, but have them point to the same place on disk.
I'm listing all these strategies so that you can say "Forget about 1, 4 or 5 are much easier." But for the moment, what I'm thinking about is 1. Is this easy to do?

There's some promising text in "man -s7 hostname" which says env variable HOSTALIASES can point to a file which expands simple hostname aliases (with no periods) to whatever you want (I think the expansion has to be to a hostname not a numeric address, but not sure). One could then just manipulate the alias file dynamically. However, this doesn't seem to work with any of the utilities I tried (ping, host).
I guess I could try manipulating /etc/hosts or /etc/ssh_config, since I'm going to be using rsnapshot on top of ssh. But given the potential downsides of messing up either of those files, I'm now inclined to just generate rsnapshot's config file dynamically instead. And hope that similar workarounds can be found for other utilities...

Is it possible to associate two iTunes accounts with 1 iMac?

My wife and I both share an iMac but have seperate user accounts. Each account is linked to different iCloud accounts. I recently purchased a few songs on my iPhone and was wanting to download them to our shared iMac but was unable to as my account was not associated with the iMac. We purchased the iMac a couple weeks ago and I didn't have any problems downloading from the iCloud then. Friday my wife associated her account with the iMac and disabled mine. Now iTunes says I have to wait 86 days until I can download my previously purchased items.
Any way that both can be associated with the same mac to allow past purchases to be downloaded?
Thanks

Is it possible to get an answer to a question around here? At least respond that, "We don't know and we'll get back to you."

Is it possible to associate album art to playlist and not the album?

I've created some US versions of Beatle albums with a playlist. Is it possible to assign US album artwork to the playlist while not affecting the UK album art associated with the song?

No.
tt2

Is it possible to associate iCal events with photos?

I use iCal both as an organiser and a diary. It would be cool if a few images from events could appear - perhaps based on the image metadata (keywords, date etc). For example, it would be cool if an image of a friend appeared for their birthday, or a few holiday snaps appeared on my notes about it.
Anyone know if this is possible? See mock-up for a visual explanation: http://i.imgur.com/0Ck0Q.png

dlabc563,
This post should help you subscribe to U.S. Holidays: How to add US Holidays to Calendar?: Apple Support Communities.

Possible to associate file extension with webstarted app?

A common property of microsoft apps is to associate file extensions with specifiec apps.
For example, when you double click on a .xl file, Excel is launched.
Can the same kind of thing be done for Webstarted apps? If so how?

I have an idea on how to do this, but I have not tried it.
1. On first launch, the application does an "install" before starting the main screen.
2. The install checks the OS, and writes a .sh or .bat file to disk. That batch file runs the command-line to start the application. Hmm, but how does it pass along $*?
3. The install associates the proper file extension with the .bat file, and/or with the unix file manager software, and/or with IE, Netscape, and Mozilla.
Then, when a user clicks on a link to a document, or a file in the windows explorer, then the JWS application should lanch and load the file(s).

Is it possible to associate a condition to authentication

Similar Messages

Maybe you are looking for