Is it possible to change bill-to once a PO is Ordered

Hello,
Is it possible to change Bill-To once the purchase order is placed in SAP?
Thanks,
Augustin.

Hello Rahul,
My requirement is simple,
I have already placed purchase order and want to know if I can still change bill-to information?
Thanks,
Augustin.

Similar Messages

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Is it possible to change the vendor in a saved Purchase order

    Is it possible to change the vendor in a saved Purchase order
    Regards
    Amit

    Hello, Amit,
    no, but you can change the partner functions in the PO, like "Invoicing Party", "Vendor", "Goods Supplier" -- depends on you customizing for partner schemas.
    However, this should be used only in case when during the purchase order lifecycle the partner has been changed (as result of merger, bankrupcy, factoring); otherwise, it is much easier to simply delete the PO and create a new one.
    Kind Regards
    TomT

  • Is it possible to change 'billing status' after making credit memo request?

    Hi. This is Kwangkyun Choi from Samsung SDS in Korea as a  SD system operator.
    Our system can make billing documents from contract without making sales order and outbound delevey.
    And the contract can use milstone billing.
    When we make billing document using contract,
    one of the milestone billing item's 'billing status' has been changed from A (Not yet processed) to C (Completely processed).
    And also when we cancel the billing, the status has been changed from C to A.
    BUT,
    When I make CREDIT MEMO request referenced the billing document,
    at that time the 'billing status' doesn't changed.
    It was still 'C (Completely processed)'.
    I want to change that value 'A'.
    Is there any methods to solve this problem?
    I couln't find any solution using customising IMG setting.
    PLZ help to solve this problem.
    Best Regards.
    Edited by: Kwang-Kyun Choi on Oct 13, 2009 10:45 AM

    Hello,
    Let me clear my thought on this issue related to Billing Status of the Billing Docoument. You want to change the billing status of billing document to not yet processed after you have created a credit memo request. If this is the case then my explanation would be as :
    when billing document is generated and then Accounting document is also generated,  the billing status is fully completed. Nothing is rejected here nor nothing is left over. When you are creating a credit memo request, which is of course created with reference to Billing document then the billing status under no circumstances can change to "not yet processed" as the billing process is completed. Morever you are creating the credit memo request to adjust payment for the cusotmer.
    Hope this helps to understand !!
    Regards,
    Sarthak

  • Is it possible to Change Directory structure once the project is developed?

    Hello,
    I am a Newbee to OAF development, I recently developed a JSP page using the oracle recommended directory structure "<companyname>.oracle.apps.<custom directory>." ie., for ex: "*xxcom*.oracle.apps.xxco.xxco_mapping.server", the page worked perfectly fine when I ran it from jDeveloper.
    but when I tried to deployed the same in the server to run from Oracle Applications, I found that our organization's unix directory structure where I need to deploy the files is not the same, they are excluding the "<companyname>" directory in there structure, the directory structure in unix looks like this "$JAVA_TOP.oracle.apps.<custom directory>...." ie., for example: "/u06/appsw/appdevcomn/java/oracle/apps/xxco", so now I cannot deploy the page I have developed.
    How do I resolve this issue? can I change the directory structure in jDeveloper now to match that on the server, ie., change it to "oracle.apps.xxco.xxco_mapping.server" instead of "*xxcom*.oracle.apps.xxco.xxco_mapping.server"
    Thanks

    Yes, it is called refactoring. PLease see the link below:
    http://jdeveloperfaq.blogspot.com/2010/04/faq-20-how-to-refactor-adf-components.html
    Kristofer Crus

  • Change billing item category

    Dear Experts,
    How to change billing item category in sap? We want to change SD Doc Item Category as M for order related billing document.
    Regards
    BK GAIKWAD

    Hi,
    So, you want to change from Delivery related billing to Order related billing.
    In that case you doNOT directly ONLY change the billing item category. Follow the below -
    1.  Take your item category say ZTN3, in VOV7 change "Billing Relevance" to B (Relevant for Order related billing.....)
    2. In your Sales Doc type (say Z1OR), in VOV8, field "Order - Related Biling" give = Billing Type (say Z1F2)
    3. In "Assign item category" for Sales Doc type, Item cat gr. give ZTN3
    4. In copy control, VTFA, for Z1OR | Z1F2, copy item category TAD and rename it as ZTN3 (if Z1OR | Z1F2 is NOT yet created then create that copying OR | F2)
    5. Test - Create sales order in VA01
    6. Create bill in VF01, give your sales order number and create bill

  • It is possible to change any warning message type to error message type?

    Dear All,
    Kindly do your need full efforts to solve this problem;
    For T code iw32, material avaibility checks works but it gives warning message as per error message required at this point.
    It is possible to change that message 281 i.e. Order & has missing parts to an error message rather than a warning message.
    Kindly provide your valueable suggestions regarding it.
    Do tell about any badi or echancement spot or user exits where error message can be incooperated.
    Thanks in advance.
    Regards,
    MAA

    Dear Rohan,
    Problem not facing problem due to any code, i think u r not getting wht i am saying.
    Let me explain in detail.
    While creating order from t code iw31, material avability checks works and it is working fine and generating a warning mess in case of out of stock case. Requirement is to transform that warning mess to error mess.
    Just need to know how can i change standard warning mess to error mess so that error mess displays in place of that warning mess.
    Kindly suggest its solution for it .
    For any query free feel to contact.
    Thanks.
    Regards,
    MAA

  • In Premiere Pro, is it possible to change the project aspect ratio once started?

    In Premiere Pro, is it possible to change the project aspect ratio once started?

    On a side note, 'projects' do not have as aspect ratio, sequences and footage do.  And a project can contain any number of sequences or footage.

  • Is it possible to change name on bill?

    I am wondering if it is possible to change the last name on the bill? When I signed up I used my maiden name as my middle name and it was entered as my last name?  Is is possible to change it to my married name?

    I would like to change the name on the account to my daughter.  <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
    <Contact customer service at *611 on your Verizon Wireless phone or 1-800-922-0204 from other phone.>
    Message was edited by: Verizon Moderator

  • Any work around to change 'bill to party' once the payment is cleaned?

    Hi Experts,
    There is a specific situation which wants to change the 'bill to party' after the payment is finished already. That means the deal is closed, but still wants to change the 'bill to party' to sell to other customer. Is it possible to change the customer directly in sales order or invoice without going through 'customer return' process?
    Thanks for your help, Ivy

    Hi Ivy
    I am sure this is not possible in SD, also i advise you not to do this. Incase you want to sell the material to some other customer, the process is always to receive teh material first and then sell to some other customer. Only such a scenario will take care of the freight costs, incoterms, material cost(COGS) etc. Hence Please dont try to overwrite the partners by means of some enhancements. Always do a corresponding reversal and then initiate a new trade to some other partners. This will also give you a sales and returns figures which is free of any manual intervention. As a sale is considered to be a sale even if it is returned at the end of month report, (if there is a return, then it will come in returns report and hence will nullify in the net sales), please do sales by sales process and returns by returns process without changing the process flow.
    Pls reward points if this has helped you

  • Is it possible to change Company Code in Cost center, once postings done?

    Hello Friends - We have Cost center created in CoCd 0001 and made the postings and this year beginning CoCd in Cost center was changed from CoCd 0001 to 0002 for some business reasons. Now, User says that he needs to post one journal to this Cost center in CoCd 0001. As this Cost center is in another CoCd, It cannot be used in CoCd 0001.
    Please suggest me that if it is possible to change and the process to change the CoCd in 0001. Once journal is posted, we will put it back 0002.
    Thanks

    Hi Hoysala,
    Please refer to the following note Note  62716.  These three prerequisites must be met:
    1.  The change interval is set to period limits
    2.  There is no dependent actual transaction data in the change interval or afterwards.
    3.  There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02
    (for example, by changing the cost center manager).
    You may use transaction code rkacshow to check the transactional data that exists on the affected cost center, in order to change the company code, all these data should not exist for the time
    interval.
    Regards,
    Jose

  • Is it possible to change the page of a linked PDF without relinking?

    Is it possible to change the page of a linked PDF without relinking and going through the import options?
    I'm trying to import seveeral pages of the same PDF. The process would be quickest if I could import it once, then duplicate the image box a number of times, then just change the page number each image box is linking to.
    At the moment I'm having to relink (or place), then go through Import Options, then choose the page - it's a long process that feels like it should be quicker.
    Any ideas?
    Thanks

    The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
    My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

  • Want to change billing date but computer says no

    My billing date for phone and broadband is the 6th of the month, with payment being taken around the 20th, which has been fine up until now. However my employer has now changed my salary payment date and I'd like to change the bolling date so that the payment isn't taken until after the 1st.
    Firstly, why is it seemingly impossible to email anyone to ask about this? All the "contact us" links just take you back to a phone number and I'm at work during the non-automated times so it's not easy for me to make a call.
    Anyway, make a call I did, spoke to somebody in the call centre, tried explaining the situation, but they only seemed to hear the "change billing date" part and didn't seem the least bit interested in the whys and wherefores, then it was just a case of "computer says no, is there anything else I can help you with"
    I can't see why this is such a big problem. It's not like I'm asking not to pay or anything, I know that the first bill after I changed dates would be higher, because it would cover an extra couple of weeks, but I don't see why it's beyond the realms of possibility to put the bill date a couple of weeks.
    I managed it with my mortgage, which is considerably higher than my BT bill
    A quick email to the mortgage company, had a letter back a couple of days later confirming the payment date had been changed and the first payment on the new date would be an extra £xxx to cover the difference, all sorted no problem. Why do BT make things so difficult?
    Solved!
    Go to Solution.

    Try as I might, there seemed to be absolutely no option to change "whole bill direct debit" so I can't quite see how you can do it online, the only option I could see was to set up a DD, but I've already got one.
    Anyway, all sorted now, thanks to a 5 minute online chat. I'm now swtiched to a MPP, which is for give or take a few pence, exactly the same as my monthly bills have been and instead of my next payment being taken on the 20th of this month, it's now going to be taken on the 2nd of next month and every month thereafter, which is exactly what I wanted to do.
    Quite what the difference between whole bill monthly and MPP, I'm not quite sure but it's sorted

  • How to change billing date in S1 - cancellation billing document

    Dear Friends,
    Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
    Is it possible?
    Thanks in advance.
    Ranjan

    Dear,
    Thanks for asking exact problem.
    1. PGI in 2008
    2. F2 Billing date in 2003 ( By mistake by the user)
    3. S1 Billing date in 2008
    4. PGI reverse in 2008 & OBD deleted in 2008
    So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
    Billing qty  is not matching with the actual PGI quantity.
    So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
    Now my issue is how to balance it.
    hope you find it it very interesting
    Awaiting your response.
    Ranjan

  • Changing Bill Due Date?

    I'm wondering if it's possible to change the due date of my account. I was assigned the 8th of every month when I originally started my service, and that worked for the most part, however recently my pay schedule has changed and it's only become possible for me to pay my bill later in the month. Since my due date is still the 8th, and I consistently pay on or around the 20th (when I get paid), my account is perpetually late and I would like to avoid this going forward.
    Is it possible to change my due date, and if so, does it require any special payments such as a month in advance?
    Thanks!

    Yes it should still be possible, I did when I first got on Verizon & I think they just added or prorated the extra days to my next bill, which in your case sounds like 12, it will be a larger bill the following month because it will start around the 20th or whatever you want, but it will stop your account from being delinquent all the time, & it doesn't cost more, it's just your waiting longer to pay your bill as it's being prorated for those days, then it will all even out the month after that. Good luck....

Maybe you are looking for