Is it possible to create a Report Object in a menu?

Hi all,
I 'm working on an oracle report wherein the user will not give any parameter.
They would like to view the report by clicking on the menu option for this report and it should then open the report in an new browser window
in pdf format.
My question:
Is it possible to create a report object in the menu?how can we do this?
I'm working on Oracle reports version Report Builder 10.1.2.0.2
TIA

Thanks for your prompt reply.
Through form I'm able to create report object and report is displayed successfully.
I'm using the following code:
DECLARE
          report_id Report_Object;
          ReportServerJob VARCHAR2(100);
          rep_status VARCHAR2(50);
BEGIN
          report_id:= find_report_object('Report1');
          SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'vouno='||:vouno||' paramform=no');
          ReportServerJob:=run_report_object(report_id);
          rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
          LOOP
                    rep_status := report_object_status(ReportServerJob);
          END LOOP;
          IF rep_status = 'FINISHED' THEN
          WEB.SHOW_DOCUMENT('http://sushma:8889/reports/rwservlet/getjobid'||
          substr(ReportServerJob,instr(ReportServerJob,'_',-1)+1)||'?'||'server=rep_sushma','_blank');
          ELSE
                    message('Error when running report');
          END IF;
END;
I'm not able to use the same code in Menu, as there is no way to create report object "Report1"
Or is there any was to create object.
So in place of report_id:= find_report_object('Report1');
I used report_id:= find_report_object('c:\.... *.RDF');

Similar Messages

  • Is it possible to create a rotating object in Muse?

    Is it possible to create a rotating object in Muse? I have a round logo and I want it rotating.

    HI
    If you are looking for an animated logo, which rotates in 360 degree, it is not possible in Muse. You can create an animation in Edge animate and import the animation in Adobe muse.,

  • Is it possible to create dynamic reports using iReports in netbeans ?

    Hi
    I want to know that is it possible to create dynamic reports using netbeans? Dynamic reports means based on user selection(for eg. say by selecting values from combo boxes) some query will be genatated and fetch the query result from data base and displayed results in iReports only my problem is i am working on Netbeans IDE and i have installed iReports as plugins in netbeans IDE. and i am not able to find any tutorial that show me how to work with iReports under netbeans IDE. and how to create dynamic reports in iReports. If u know any such tutorial then can you send me link plz...!
    Thanks

    What do you mean by "in Start Menu"? Do you mean Live tile? See https://msdn.microsoft.com/en-us/library/windows/apps/hh465403.aspx
    https://msdn.microsoft.com/en-us/library/windows/apps/dn468032.aspx
    Best Regards,
    Please remember to mark the replies as answers if they help

  • Is it Possible to Create Custom Report in SOLMAN

    Hi Experts,
                         I am new to SOLMAN. I have one question. Is it Possible to create our own custom Reports in SOLMAN. If possible
    tell me the variuos types of reports and how we can create.

    Hi
    SAP Solution Manager can be used for entire ALM so you need to clearly specify which area and what report you are talking about
    http://www.sdn.sap.com/irj/sdn/alm-getting-started
    General transaction code for reporting is
    SOLAR_EVAL
    it helps you to build the entire project report phase wise or for service desk or for charms or test management etc
    check if that you are looking for.
    regards
    Prakhar

  • Is it possible to create a development object from the development tab?

    Hello All,
    One the central concepts of SAP Solution Manager is that you perform almost all activities starting in Solution Manager. As I understand, it is not possible to create a customer development such as a program from the development tab in SSM. You first have to logon to the 'satelite' development system and create the object. Then you can register this object at the development tab. 
    Is this correct?
    Thanks in advance.

    Hi,
    You are right, you have to create your objects in your satellite system (its obvious).
    This object can be against any servicedesk message or any requirement for a particular business process, thus keeping track of all the developments process wise, request wise.
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • Is it possible to create a file object from a resource?

    Hi all
    Is it possible to create a File from a resource call rather than from a path
    e.g.
    File myFile= new File("C:/j2sdk/sampledir/mypage.htm");is how im doing it now
    how can i call it from a resource something like
    File myFile= new File(this.getClass.getResource("mypage.htm"));

    you may be right
    im trying to load a file into a string then display that string
    my resource thingy isnt working anyway :s
    [code[
    URI pTURI=null;
    URI pBURI=null;
    try
    pTURI= new URI(this.getClass().getResource("/resources/prev_header.htm").toString());
    pBURI= new URI(this.getClass().getResource("/resources/prev_fullpac.htm").toString());
    catch(URISyntaxException e)
    warnUser("URI Error");
    File previewTop = new File(pTURI);
    File previewBtm = new File(pBURI);
    im getting this error
    java.lang.NullPointerException
    at cssCreator.cssCreator.setPreview(cssCreator.java:1263)
    at cssCreator.cssCreator.<init>(cssCreator.java:48)
    at cssCreator.cssCreator.main(cssCreator.java:1681)

  • Is it Possible to create a Report Name starting with M.

    HI ,
        Just Now I have created a report naming with MYreport. I have expected that system will ask the Access Key since starting letter is M . But  System allowed me to create the Report MYREPORT.
        As per My Knowledge, Only Y and Z letters for Report. But now how system allowed me to create a report starting With M without access key.
    With Regards,
    Neptune.M

    Hi,
    You can name a program with 'MZ' or 'MY'. Infact all the includes of custom module program will be having names starting with 'MZ' or 'MY'.  Try creating a program with other than these combination, the system will surely check.
    Addendum:
    For example if you create a module pool program with name
    SAPMZTEST, then the include names will be
    MZTEST_TOP, MZTEST_O01, MZTEST_I01, MZTEST_F01 and so on..
    Similarly, for Z function group sap creates dynamically creates the following programs:
    SAPLZTEST - Main program
    LZTESTTOP
    LZTESTO01
    LZTESTI01
    LZTESTUXX where X containing includes LZTESTU01,LZTESTU02 stands for 01, 02 and corresponds to function module under the function group.
    Thanks and regards,
    S. Chandramouli.
    Edited by: Chandramouli Subburathinam on May 5, 2008 2:35 PM
    Edited by: Chandramouli Subburathinam on May 5, 2008 2:42 PM

  • Is it possible to create 2 Date objects with different hashcode.

    Hi,
    I want to create 2 java.util.Date objects with different hashcodes. Is it possible??
    Regards,
    Farooq

    import java.util.Date;
    import java.util.Calendar;
    public class TwoDates {
        public static void main(String[] args) {
            Calendar oneCal = Calendar.getInstance();
            oneCal.set(Calendar.YEAR, 1903);
            Calendar anotherCal = Calendar.getInstance();
            Date oneDate = oneCal.getTime();
            Date anotherDate = anotherCal.getTime();
            System.out.println(oneDate.hashCode() + " " +
                               anotherDate.hashCode());
    -14330615 -825112150

  • Is it possible to create a report combining data from 2 reports?

    Post Author: swalker
    CA Forum: General
    We are upgrading the application, ServiceCenter.  We have reports that show our Response and Resolution Metrics.  I have 2 set of reports, one for the old version and one for the new version.  I need to combine the results of both reports into 1 and do calculations on the data from both.  Can this be done with 2 sub reports in the main report that does the calculations?  Can 1 report connect to 2 separate databases?  I am using Crystal Reports v8.5. Is there any documentation on this or sample reports?  Can any one please give me some guidance?  Thanks

    Post Author: swalker
    CA Forum: General
    yangster thanks for the quick reply.  I am not really sure about combining reports, so I looked into what you said.  I tried to create a shared variable on the field that I need to share but that field is a running total and I get an error when I try to run the report "This field cannot be used becaus eit must be evaluated later."    So I am not sure what to do now.  Is there a work around for this?  Thanks for any help.

  • Is it possible to create a report for script selections?

    I am using UCCE version 8.5 and programming with Internet Script Editor. I would like to know which options callers are selecting in my script. I know how to do this by monitoring the script. I would like to have it captured in a report so that I do not have to remain logged in while monitoring the script. I can get the information for the skill group from CUIC. The information I am looking to capture happens in the script before it gets to the skill group.
    Thanks,
    Dale

    Maybe I am not understanding your question, the simple answer is Call Types, one of the functions of Call Types is to obtain call counts through various paths in the script. You do want to be careful with where you place Call Types in your script, Call Types are used both for Call counts and Service Level calculations. 

  • Is it possible to create crystal reports on IBM RAD with Java Bean as Data Source

    <p>Hi,</p><p>&#160;</p><p>          Our company wants report generation in IBM RAD 7.0  using crystal reports with a Java Bean as data source. i HAVEN&#39;T FOUND ANY ARTICLES TO WORK ON RAD. Any inputs appreciated..</p><p>&#160;</p><p>Thanks,</p><p>Manju</p>

    Look for Java POJO in the doc, i'm using RAD 7.0 and it's working like RAD 6.0

  • Is it possible to create a PDDoc object directly from the content stream (or byte array) in memory instead from a physical file?

    I want to read a pdf that has been saved to the database and if it has been signed display the signer's name and the sign date to the user.  If the file is first saved to a physical location I can do this with the SDK/ JSObject it there anyway I can do this without a physical file?  This is part of a C# application.

    OK.
    However, if you are using the SDK, then you are using Acrobat – it just may be doing all it’s work hidden.
    So the plugin that you have installed in Acrobat is therefore also hidden, doing its work behind the scenes, on command of your application.

  • Is it possible to create a hyperlink in a context menu entry?

    We use Altium Designer, which export schematics to PDF.
    For the parameters it uses the context menu of the pdf specs.
    One entry in the menu is a path to a document.
    Is it possible to get an hyperlink to this Path/URL, to open it directly out of the Adobe Reader XI?
    In the current output it is not possible.
    What must be done in the PDF definition to realize the hyperlink?
    best regards
    Silvio Kilz

    Are you using JavaScript to create this menu? If so then you can expand your code to open a file (or a web-link) based on the user's selection.

  • Is it possible to create an iPhoto slideshow with a menu for each child?

    I want the DVD to open with three photos: Karen's, Lori's and Amy's.
    When Karen clicks her photo, three more of her photos will appear: a baby photo, a school-age photo, and an adult photo. If she wants to watch a slideshow of her baby pictures, she will click the baby photo...
    Each daughter will have a similar setup - three slideshows for each of them. I'm not very picky about which theme will do the job.
    I have checked two books and the Apple tutorial and can't find a similar example.
    This is only my second slideshow. Any help will be appreciated!
    Flat Panel iMac (still love it) w/superdrive   Mac OS X (10.4.4)   iLife'06, 512 mb ram, 200 GB and 250 GB hard drives, wireless network

    Yes this can be done.
    First create the 9 slideshows you need in iPhoto......for each one, when finished use the "Send to iDVD" to create a QT movie of each slideshow......be sure to pick the music/playlist in iPhoto (unless you want to use iMovie for that and other things...). When iDVD opens, just close it without saving.
    Then open iDVD and choose a menu. As an example, choose "Portfolio Color". Retitle it to "Daughters" or whatever you want.
    Then click on the "+" sign at the lower left, and choose "add submenu" -do this two more times yo get three folders. Then click on the media button, and choose three photos to use as a button instead of the folder. Just drag each photo onto the folder. Rename each submenu to Karen, Lori and Amy. Click once on the text, wait, then click again and edit.
    Then double click on one submenu. Drag in the correct three iPhoto movies you exported using the "Send to iDVD" command. By default, they go to your home directory in the Movies folder. You can also find them using the Media tab in iDVD and look for Movies.
    Go back to the "Main" menu using the back arrow (double click on it).
    Repeat for the other two submenus.
    Hope this helps,
    John B

  • Problems after creating report object

    I am using Crystal Reports Server XI R2 SP4. I created a report object from a simple Crystal report successfully. Even the thumbnail showed the report data even though the report does not save data.
    However when I view the report object in InfoView or schedule it there is no report data even though Crystal Reports Viewer displays data when run against the same DB with the same parameters.
    I get the same results with any report object I create in CMC but I was to able to successfully create and run report objects the first few(5) times after which I have been getting this result.
    Is there any kind of report or job limit?
    I made max records to retrieve unlimited and bumped # of jobs in every server from 5 to 50 and the age of oldest report to retrieve from cache to 0 mins.
    Please help!

    I'm not sure this is a JAVA problem, but if you're getting an ACCESS_VIOLATION exception from the JVM a method that provides more detailed information is to check for exceptions after every JAVA function called from the native code with (*jenv)->ExceptionCheck(jenv) and if true get information with (*jenv)->ExceptionDescribe(jenv) Making mistakes in native code constructing JAVA objects has been my most frequent cause of ACCESS_VIOLATION exceptions. I hope this helps.

Maybe you are looking for

  • Variables in Rows/Columns in the BEX BI7.0

    Hi Experts, In BI 7.0, two tabs are there to drag and drop infoobjects/Key figures into them: One is "FILTER" and other is "Rows/Columns". We can see the created variables can be dregged and dropped into both pan (FILTER and Rows/Columns). What is th

  • Fonts not found when using Xvfb

    Hi all, I keep encountering "fonts specified in fonts.properties not found" whenever I execute rwserver.sh server=XXX. fyi, I'm running Solaris8 on Sun SPACE machine. I use Xvfb downloaded from Oracle to allow report server to run after I logoff from

  • Per-session VRF and IPv6

    Hello. I cant get Per-session VRF feature working with IPv6 protocol. IPv4 is working fine. Here is what i've got: test1 Cleartext-Password := "test" Framed-Protocol = PPP, Service-Type == Framed-User, Cisco-AVPair += "ipv6:delegated-ipv6-pool=ppp_de

  • Rendering forms and guides in Rails or Grails

    Hi there, I've found documentation that explains how to render ES2 forms using a Java servlet, however I'd ideally prefer to integrate forms into a JRuby on Rails or Grails application. Would anyone happen to know if this is achievable? Many thanks!

  • Apple mail 5.1

    Hi i didt have a problem until i changed my email server linux to windows.Now i can not send emails always it makes problem coming a screen that select the outgoing port.What can i do