Is it possible to create same DC (name) under different SC

Hi Experts,
I have a question on creating the DC in development prospective from NWDS 7.3.
My requirement is as below.
We have the below DC and SC structure.
SC <ABC_SC>
    DC <XYZ_DC>
SC<DEF_SC>
    DC<PSQ_DC>
both the above SC's and DC's are already checked-in to DTR. Now the question is can I create the same DC<PSQ_DC> under first SC? Ex as shown below?
SC <ABC_SC>
    DC <XYZ_DC>
   DC<PSQ_DC>
As I have developed web dynpro project it will be lot of difficult to create the dc with different name and move all the code? can you please let me know the possibility? would there be any naming convention issue and if yes, what would be the ideal solution for this scenario.
Thanks a lot in advance.

Thanks for the quick reply.
Currently both the DC's on different SC's has been checked in to DTR as shown and explained in scenario1. However, if it is possible to create the same DC under first as shown in scenario 2. Then I'll delete or stop using DC<PSQ_DC> from the first scenario from DTR.
Scenario1.
SC <ABC_SC>
    DC <XYZ_DC>
SC<DEF_SC>
    DC<PSQ_DC>
Scenario 2.
SC <ABC_SC>
    DC <XYZ_DC>
   DC<PSQ_DC>
Please advise?

Similar Messages

Is it possible to create a customer master with different address

Hi Gurus,
Is it possible to create a customer master with different address as we maintain in SAP CRM.
Kindly help me onthis issue \
Regards
Kannan

Hi Kannan,
There are no multiple addresses but you can use multiple unloading ponts for the same address for the ship to Party.
So when you create a Sales order the system will give a pop up with the unloading points allowing you to select the desired one.
I hope I understand your query correctly.
Regards
Yogesh

Is it possible to execute same eCATT script in different SAP versions

is it possible to execute same eCATT script in different SAP versions?
Regards,
Sunil sankar B.
[email protected]

Yes. In the ecatt script you have the option under ATTRIBUTES --> VERISONING DATA you can restrict it to different software components and different releases.

Duplicate class names under different multi match policies

We've inherited an ACE SM 3.0 (A5.1a) config, where we noticed duplicate class names under different multi match policies, similar to this:
policy-map multi-match POLICY1
   class CLASS1-cm
    loadbalance vip inservice
    loadbalance policy CLASS1-pm
    loadbalance vip icmp-reply active
policy-map multi-match POLICY2
   class CLASS1-cm
    loadbalance vip inservice
    loadbalance policy CLASS1-pm
    loadbalance vip icmp-reply active
    appl-parameter http advanced-options HTTP-8K-HEADER
How would the ACE know which multi match policy to use?
Thanks.

Hi,
It's always first match. If if the first one satisfies the condition, we don't even look at the second. We would move on to another type. I guess below explanation would answer all your doubts.
The term "multi-match" refers to execution semantics of the policy; In other words it depicts how the actions are executed for a given flow that matches the classifications in the policy.
The policy has multi-match semantics because the policy allows configuring multiple types of features like loadbalancing, NAT inspect etc; so potentially this policy can result in taking multiple actions (if multiple features are configured) for a given matching flow.
Now given that there can be multiple classifications configured for the same feature type within the policy, the rule is that we always execute *only* the first matching action for a given feature type;
for .eg consider the below;; just for brevity I am ommiting the exact syntax
of the cmds
policy-map multi-match MYPOLICY
class LB1
loadbalance policy L7-1
loadbalance vip inservice
class NAT1
nat dynamic 100 vlan 20
class INSP1
inspect http
class LB2
loadbalance policy L7-2
loadbalance vip inservice
class NAT2
nat dynamic 200 vlan 30
interface vlan 10
service-policy input MYPOLICY
please note above that there are 2 classes each with features loadbalance and
NAT configured and one class with inspect action;
For an incoming flow, we try to match and *execute* *ONLY* the action specified
against first matching class per feature. In otherwords, if flow matches class
LB1 then we will execute "loadbalance action L7-1" and we wont even try to see
if class LB2 matches as it is of the same feature type. Only if class LB1 does
not match we look at LB2. However we continue matching other class'es since
they have different feature types;
This happens for each feature type; Essentially between the class-maps of same
feature type think of this as first-match and across features its multiple match.
potentially for above policy the flow can match the below possible classes:
LB1, NAT1, INSP1
LB2, NAT1, INSP1
LB2, NAT2, INSP1
LB1, NAT2, INSP1
but the below is not possible;
LB1, LB2, NAT1, INSP1
LB2, NAT1, NAT2, INSP1
you can visualize the above multi-match policy like below; (pls note that below
syntax is not supported and is strictly for illustration purposes only) below has
policy types per FEATURE and each such policy can result in ONLY ONE match/action
being executed;
policy-map type SLB first-match LBPOLICY
class LB1
loadbalance policy L7-1
loadbalance vip inservice
class LB2
loadbalance policy L7-2
loadbalance vip inservice
policy-map type NAT first-match NATPOLICY
class NAT1
nat dynamic 100 vlan 20
class NAT2
nat dynamic 200 vlan 30
policy-map type inspect first-match INSPECTPOLICY
class INSP1
inspect http
interface vlan 10
service-policy input LBPOLICY
service-policy input NATPOLICY
service-policy input INSPECTPOLICY
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Can you use home share where there are 2 itunes on the same computer but under different user profiles?

Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

How do I copy parts of layers from one AI doc into a new AI doc and keep/create same layer names?

How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need, so please don't suggest that as the solution.

No Monica, nothing in Plug-ins other than the standard installed items (extensions, filters, formats, etc.). No 3rd-part clipboard extension on my computer that I'm aware of, either. All frustratingly basic. And my other CS5 Adobe programs appear to work well, at least to the extent that I am familiar with them.
So, from what I can tell of the various comments (thanks to all of you), am I correct in thinking that it seems I can't, in fact, do what all of you can do (that is, copy some objects from some layers in one doc and paste into another doc preserving those same layers by name and organization, and each containing the correct objects from each original layer)?
If so, that solves half my issue - "is it supposed to be possible to do it"; leaving just the other half - "why can't I do it too".
I'll get those screenshots made and posted later just in case I haven't adequately described the issue, or y'all haven't understood it.

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

How to create Same File Name in Recever side

Hi Frnds,
1)In my sender side i am having one XML file Name: vendor123.xml
i have to send this file to receiver side with same file name, what are setting i need to do in file adapter.
In receiver side i dont have any file, i have to crete with same file name.
2)
In my scenario my message interface name Vendor123_mt.
In receiver side my file name should be Vendor123_mt, How to do handle this situation.
Regards,
Raja Sekhar

Hi Raja,
Regarding you 1st question: It can be easily achieved using the Adapter specific Message Attributes. You can refer the Michal's blog for it.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regarding your 2nd question:
Here you will need to use Variable Substitution. Use the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Hope it helps.
Regards,
Sanjeev.

Same Input name with different data type cause the reflection exception

I have a proxy contains couple RFCs. Two RFCs contain an argument named IN_COMPANY_CODE with data type of ZTRE_FX_BUKRSTable. Another RFC contains the same argument name of IN_COMPANY_CODE but hold different data type (String). All RFCs are in the same proxy. Complie and build the application with no issue.
But when I ran the RFC, it generates the reflection exception below:
Method SAPProxy1.Z_F_Tre_R_Pre_Trade_Fx can not be reflected. --> There was an error reflecting 'In_Company_Code'. > The XML element named 'IN_5fCOMPANY_--5fCODE' from namespace '' references distinct types System.String and MSTRFOREX.ZTRE_FX_BUKRSTable. Use XML attributes to specify another XML name or namespace for the element or types.
I realize the conflict introduced by the same name with difference data type. But I would like to know if this is fixable as a bug or if there is any best practice and/or some manual intervention to make it work.

Please install fix from OSS note 506603. After this, right-click .sapwsdl file and select "Run custom tool".

How to avoid save same employee name under same company name

hi,
i am doing flex4 web application with mxml tags,
i am having one text box and one datagrid and one save button. text box having one company name, data grid having employee names.
when i click save button which is placed in outside the datagrid it will save all the details.
Now my requirement is text box having the same company name and when i enter same employee name in datagrid and click save button means it wont
allow to save that record, and through msg box with some alerts.
How to do this,
Any suggession or snippet code are welcome
Thanks ,
B.venkatesan

hi raghs,
i want to add records in cloud.bt while adding the records if we enter existing record details and try to save again na it wont allow to that record.
that time the alert box should show this msg "This record is already existing record in cloud database.
ex: one company name called mobile. i am adding a employee name called raja now i save this record,its data saved in     cloud DTO
again try to add same employee name raja under the same compny means it should through error.
I am give my code here please if any suggession tel.
CODE:
private function saveRecord():void
            refreshRecords();
            model.employeeDetailsReq=new EMPLOYEEDETAILS_DTO();
                var lengthindex:uint=model.employeeDetailsReqRecordsList.length;
                var i:int;
                for (i = 0; i < lengthindex; i++)
                if((model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employ ee name==customerdet.selectedItem.employeename)&&
                     (model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employeeN umber==customerdet.selectedItem.employeeID)){
                    Alert.show("you cannot Add Same CustomerName and Invoiceno again");
(when this line come the error through like this: Index '8' specified is out of bounds.
else
var dp:Object=employeedet.dataProvider;
var cursor:IViewCursor=dp.createCursor();
var employeename:String = employeename.text;
         model.employeeDetailsReq.employename = employeename;
model.employeeDetailsReq.employeeNumber=cursor.current.employeeID;
var sendRecordToLocID:QuickBaseEventStoreRecord = new
                    QuickBaseEventStoreRecord(model.employeeDetailsReq, new
                        KingussieEventCallBack(refreshList))
                sendRecordToLocID.dispatch();
<mx:Button id="btnAdd" x="33" y="419" enabled="false" label="Add" width="65" fontFamily="Georgia" fontSize="12" click="saveRecord()"/>
employeename and employeeID are datafields of datagrid. datagrid id=customerdet
employeeDetailsReqRecordsList---recordlist of save records
Thanks,
B.venkatesan

Is it possible to create a multi provider with different info providers?

hi all,,
Can anyone let me know is it possible to create multi-providers from different info providers.
thanxs
haritha

Hi..
An infoprovider is an SAP BW object you can use to create and excute queries . Info providers include objects that physically contain data , for expale ... data target like info cube , ods onjects , and info objects ( char , att, text or hier ..)
They also include objects that do not represent physical data storgae :
Remote cubes , sap remote cubes . and multiproviders.
info providers are objects or views relevant to reporting ..
info providers can include
info cubes ( basic cubes and virtual cubes )
ods
char obj ( with attt or text )
info set
multiproviders
with regards,
hari

Same index name for different tables in different schema

Just a quick query
Can two tables present in different schema of same database has same index name ?
Will there be any problem?
Thanks

And just a quick answer:
859486 wrote:
Just a quick query
Can two tables present in different schema of same database has same index name ?Yes.
>
Will there be any problem?No.
>
Thanks

Is it possible to have same file size for different dpi?

I changed one.TIFF file (300dpi, 1024X1332) to .jpg files of four different dpi. But when I checked the four result jpg files, I found out that they are all in same file size and quality.( I also have checked the property of the files in the Windows.)
I think more DPI means more data and more file size. Am I wrong?
I use Photoshop CS 5.1(64bit, WINDOWS) - which is part of my Adobe Master Collection CS5.5.
TIFF(300dpi, 1024X1332) ->
1. JPG(72dpi, 1024X1332) : 306KB
2. JPG(108dpi, 1024X1332) : 306KB
3. JPG(144dpi, 1024X1332) : 306KB
4. JPG(600dpi, 1024X1332) : 306KB
I tested a few times more with different files. and same result comes out.(same file size for different dpi)
Thanks in advance.

Yes absolutely. Great observation. PPI does not control the number of pixels, just how big they are.
Now, if you change the PPI in the Image Size dialog with Resample checked.. then, that is a different story. In that case you will be changing the pixel dimension of an image (i.e.,changing the total number of pixels making up the image) while keeping its print size.
In your test files, you will notice all the print sizes are different, because all you were telling Photoshop to do was change the size of the pixels (if or when the image is ever printed), which is really just a bit of metadata of the file.

How to create Same file names for source and target.

hi
Can any body send Procedure for below requirement.
how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
Please help me.
Thanks

Hi,
See the below link
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
Regards
Chilla

Is it Possible to create a Report Name starting with M.

HI ,
Just Now I have created a report naming with MYreport. I have expected that system will ask the Access Key since starting letter is M . But System allowed me to create the Report MYREPORT.
As per My Knowledge, Only Y and Z letters for Report. But now how system allowed me to create a report starting With M without access key.
With Regards,
Neptune.M

Hi,
You can name a program with 'MZ' or 'MY'. Infact all the includes of custom module program will be having names starting with 'MZ' or 'MY'. Try creating a program with other than these combination, the system will surely check.
Addendum:
For example if you create a module pool program with name
SAPMZTEST, then the include names will be
MZTEST_TOP, MZTEST_O01, MZTEST_I01, MZTEST_F01 and so on..
Similarly, for Z function group sap creates dynamically creates the following programs:
SAPLZTEST - Main program
LZTESTTOP
LZTESTO01
LZTESTI01
LZTESTUXX where X containing includes LZTESTU01,LZTESTU02 stands for 01, 02 and corresponds to function module under the function group.
Thanks and regards,
S. Chandramouli.
Edited by: Chandramouli Subburathinam on May 5, 2008 2:35 PM
Edited by: Chandramouli Subburathinam on May 5, 2008 2:42 PM

Is it possible to create same DC (name) under different SC

Similar Messages

Maybe you are looking for