Is it possible to create warning messages in BPs?

Hi all,
We're currently using Unifier version 9.13.6.
What I would like to do, unlike a validation rule, is to create a Warning Message based on a pull down field and a chosen Work Flow Action.
For example, if the Work Order Status Pull Down is chosen as "Complete" and the Work Flow Action is chosen as "Sent For Review", the BP would advance to the next Work Flow Step.
If the Work Order Status Pulldown is chosen as 'In Progress' and the Work Flow Action is chosen as "Update", the BP record would be updated.
But if the Work Order Status Pulldown is chosen as "Complete" and the Work Flow Action is chosen as "Update", I want a warning message to pop up to warn the user that "Compete" has been chosen as the Work Order Status, but ultimately allow them to Update the BP.
Unlike a Validation Rule, which would prevent them from updating the record.
Any assistance would be appreciated.
Cheers,

Not to my knowledge.  I have come across similar situations where after the user has entered a certain combination of data that I would like to provide a warning about additional info the user may/should provide, but which may not be necessary in all cases (hence validation would not work), particularly when the issue is on a detail form.  The formula functions don't handle this level of logic.
This could be an enhancement, but now we’re entering the realm of scripting the system.

Similar Messages

  • Create warning message at the time of order creation

    I am looking for a  solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

    The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver.  If the used cost center is belongs to some other company code, said warning message should occure.
    I tried user exit, field exit, also used std message control (KO-458).  Nothing is working.

  • To create Warning Message in Infotype -10

    Dear Gurus,
    I want to create warning messages in IT0010,  when doing Actions. Any inputs plz .
    Thanks

    HI
    How r u Hope dong G8..... check the attributes of the Infotype
    Rajeshk

  • Possible to create a Message Box in response to end-user selecting "cancel" or "block" after clicking a link to a URL?

    Hi all:
    When an end-user clicks a link/button to connect to a URL, the security dialog automatically appears giving them the options of "Allow," "Block" or "Cancel".  Should they select "Block" or "Cancel," can we trigger a message box informing them they blocked or cancelled the connection?
    With traditional message boxes, we're causing them, ie
    var rtnFromBox = xfa.host.messageBox("Information is missing.\n\n Are you sure you want to continue?", "Missing Information",1,2);
    if (rtnFromBox == 4){
        xfa.host.messageBox("Okay, we'll keep going.","",1,0);
    But with the URL security dialog, we're not calling it from a variable - it just happens.
    I guess a similar question could be applied to a "Save" button.  Where if the end-user selects "cancel" on the "Save As" dialog, a warning could pop-up reminding them to save soon.
    Thoughts?  Thanks!
    Brian

    Radz,
    I didn't think so but figured I'd ask.  Thanks for the response though!
    Best,
    Brian

  • Warning message in method

    Is it possible insert a warning message in a method?
    If it is possible canyou send me an example?
    Thanks a lot.
    CV

    Hello
    There is nothing special about warning messages in methods, e.g.:
    METHOD my_method.
      MESSAGE 'This is a warning with MY_METHOD' TYPE 'W'.
    ENDMETHOD.
    The question is how will your class react if the user pushes the ESCAPE button in order to cancel the further processing.
    Regards
      Uwe

  • Warning message assignment to accounts

    Hi
    Is it possible to assign warning messages to some certain accounts or is it always the way that warning messages are related to all accounts. I have tried se91 but did not find a solution. Where you can handle these messages and is it even possible to assign them to accounts??
    BR
    Jaakko

    This thread is in wrong forum. Sorry about that. I have resolved this by assigning messages to users.

  • Is it possible to create .msg Outlook file in CRM?

    Hello,
    I am talking in regard to the CRM 5.0 IC Web Client and wanted to know if it's possible to create Outlook Message Format (.msg) type file for any E-Mail message with it's attachments?
    Thanks and Regards,
    Vasu

    Hi Vasu,
    Did you manage to get a solution on this? I have a similar requirement as well.
    Thanks,
    Angel

  • ODSI - suppress warning messages

    Hey,
    Is it possible to suppressing warning messages, so that they don't show up on console/in logs?
    There are some cases when we are sure about the logic executed by the ODSI, but logs files are still filled with warnings which annoy us and support teams.
    thanks,
    Leszek

    And is there something I can do to suppress them from the code side? (I would like to see all warnings except of those which were reviewed and considered as harmless).

  • Customer would like create a message

    I've read that customer users could create a message with Web User Interface.
    "Activating the Work Center (Web User Interface)
    To create a message, customers access a Web interface using HyperText Transfer Protocol (HTTP) or HyperText Transfer Protocol with SSL (HTTPS). The Work Center therefore acts as a central platform that customers can use to manage messages."
    But it's possible to create a message from SAPGUI (Help --> Support Message) and this message is sending to my Solution Manager ? If it's possible, how can I do to it ?
    Thank's in advanced
    Francesc sEGURA

    Hi Francesc,
    this is possible and achieved by customizing in the standard service desk scenario.
    The customer system must be connected to your Sol Man. Table BCOS_CUST must be maintained in the customer system (usually the SM_<*>_BACK destination to Solution Manager is used which got generated when connecting the customer system to your Sol Man in tx: SMSY).
    There are probably some other tasks to be done.
    You can find more information in the IMG.
    Regards

  • Pop up warning messages

    Hi, Is there a way to pop up warning messages in BPS not having to hit F9 first?
    Thanks,
    Diana

    <FONT FACE = "Tahoma", Font Color = "Blue">
    Hi
    <Br>
    Can you please elaborate?
    <Br><Br>Hope it helps.
    <Br>
    <Br>
    Cheers
    Abhijit
    <Br>* It's a good habit to reward someone with points in SDN if you think his/her
    response was helpful to you</FONT>

  • It is possible to change any warning message type to error message type?

    Dear All,
    Kindly do your need full efforts to solve this problem;
    For T code iw32, material avaibility checks works but it gives warning message as per error message required at this point.
    It is possible to change that message 281 i.e. Order & has missing parts to an error message rather than a warning message.
    Kindly provide your valueable suggestions regarding it.
    Do tell about any badi or echancement spot or user exits where error message can be incooperated.
    Thanks in advance.
    Regards,
    MAA

    Dear Rohan,
    Problem not facing problem due to any code, i think u r not getting wht i am saying.
    Let me explain in detail.
    While creating order from t code iw31, material avability checks works and it is working fine and generating a warning mess in case of out of stock case. Requirement is to transform that warning mess to error mess.
    Just need to know how can i change standard warning mess to error mess so that error mess displays in place of that warning mess.
    Kindly suggest its solution for it .
    For any query free feel to contact.
    Thanks.
    Regards,
    MAA

  • TM01 Create Fixed-Term Deposit : Warning message encountered

    Hi,
    I am creating Transaction in TM01. Upon saving, warning message is displayed "No accoutn assignment reference was found". What could be the possible reason why the error message prompt. and what could be the possible effect if I continue saving the Transaction.
    Thanks.

    Hi Kalawiswis,
    To configure Acct Assignment Ref, please follow the follwoing series of links:
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment References
    If you are using standard AAR available, no need to create new, but recommended to create your own with correct identification parameters
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment Reference Determination (OTC Transactions)
    You can use the standard assignemnt or create your own rules for deriving AAR.
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Determination
    This needs to be done after finalising your GL head where actual flows should post the amount with TBB1
    Regards
    Prasad AV

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Error message & warning message while creating PO

    Hi,
    I have one requirement like when user create PO with 'critical material',while saving PO,user should get message "critical material".
    For this ,in the enhancement MM06E005,EXIT_SAPMM06E_012(functional module),
    I have written piece of code
    *critical Material by Jaheer,ABAP & MM specialist
    LOOP AT TEKPO.
    IF TEKPO-MATKL EQ '9068'.
    MESSAGE ID 'ZMM' TYPE 'W' NUMBER '013' with TEKPO-MATNR.
    ENDIF.
    endloop.
    Here whenever I put message type 'E',I am getting message "critical material".But I donot want error message ,I want only warning message,so when I changed message type as "W",I am not getting any message while checking My PO.
    What is the reason?
    please,Can somebody throw some light on this?
    With Reg,
    Jaheer

    Hi
    Use the badi ME_PROCESS_PO_CUST, method CHECK, with a coding as this
      include mm_messages_mac.
      data: header       type mepoheader,
            items        type purchase_order_items,
            po_line      type mepoitem,
            line_item    type purchase_order_item.
      header = im_header->get_data( ).
      items  = im_header->get_items( ).
    LOOP AT items INTO line_item.
    IF condition IS TRUE.  "critical material (line_item-matnr)
           mmpur_message 'W' 'ZMM' '013' line_item-matnr ' ' ' '  ' '.
    ENDIF.
    ENDLOOP.
    I hope this helps you
    Regards
    Eduardo

  • General Warning Message while creating po

    Hi Gurus,
    Good Morning.
    I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
    This message should be applicable to all PO .
    How to create a message and assign in PO ?
    Thanks & Regards,
    Vikas

    Hi Archit,
    Thanks for your reply.
    How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
    Thanks & Regards,
    Vikas

Maybe you are looking for

  • Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

    Hello, I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded: loading stage2 ...

  • Records from multiple tables

    Hi, I have a method that has to access records from multiple tables and store them all in a file. It's something like this: switch (tableId){ case 'A' : query="SELECT * FROM TABLE_A WHERE ID = '" + tempId + "'"; ResultSet rs = stmt.executeQuery (quer

  • The old transparency problem

    After initial optimism about using iWeb to make my new website to sell my ebook from, I am beginning to lose heart. Major bugs that are well documented on these forums have obstructed me, and I've read up as much as I can on them. It's this transpare

  • IDoc / Business Connector - future developments

    hi, I would like to know some possibilities to transfer data from a non-sap-system to a sap-system. I think the IDoc-interface is really good for transporting data into SAP-systems. I have spoken with some people they mean that the IDoc-interface is

  • How do I change the property value priceInfo.amount?

    How do I change the property value priceInfo.amount? After changing the quantity field in the shopping cart and submit the form, I need to convert the field value priceInfo.amount and then set it again. How do I? Thank´s.