Is it possible to customize ODM?

Hey~~
I'm graduate student in Korea and working to develop PDM software for middle-size firm.
Now we use oracle DB.
And we wanna customize ODM and put into our PDM software.
Because ODM is written in English, it is hard for workers to use it.
That's why we'd like to customize.
We want to use ODM through our PDM interface.
I mean we wanna make the interface to use ODM in our PDM so that workers can access ODM, analyze and get the result on PDM interface written in Korean.
Is it possible??
Thank you in advace.

Hi,
You should be able to build your own interface to ODM using the PL/SQL, SQL and JDM java apis. You can use a combination either api type as it suits your needs. For example, in ODMr, we use JDM to invoke the build,test,apply steps. We also use PL/SQL to get model details.
You can use Oracle JDeveloper to construct either thin or thick java clients for this purpose.
Since you are building an application, you will most likely have a repository to store necessary metadata where you will tie the models in with your application needs.
Thanks, Mark

Similar Messages

  • Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.
    Mark

    What was the answer to this excellent question, please?
    Mark
    Student
    Posts: 1
    Registered: 05-14-2009
    0
    Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
    Options 
    05-14-2009 06:56 AM
    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.

  • Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    No.
    Here are the available sizes:
    http://www.apple.com/ilife/print-products.html#prints

  • Is it possible to customize the playback controls bar in a dvd flash?

    Is it possible to customize the playback controls bar in a dvd flash?
    I mean is it possible to change the size of the bar? and the size of the controls?
    Is it possible to remove (not hide or disable but remove from the bar) some controls as "search", "title" ecc...
    Thank You...

    CS5 greatly improved the options for player configuration.
    http://help.adobe.com/en_US/encore/cs/using/WS130B1F01-AE62-4c59-BA44-F29ACD8522EEa.html#W Sf01dbd23413dda0e-3ea68760123ebe30b7c-7ff2
    I have not played with this enough to answer your specific questions. Let us know.

  • Possible to customize #{bindings.Delete.enabled} checks at ADFBC level?

    11g ADF Faces w/ADFBC
    Is it possible to customize the checks for a Delete binding at the underlying EntityImpl or ViewRowImpl level?
    On my page I have a table within a panel collection. On the panel collection's toolbar I have a button tied to a Delete operation on the iterator that provides the table data.
    I want the Delete button to be disabled for certain rows based on various data checks. (In my case, checking to see if the DB row is referenced elsewhere in the DB.) Is there some EntityImpl or ViewRowImpl method I can override to perform this check?
    (I know I can override remove() to check and throw an exception, but this would occur after the user has pushed the button in the web page.)
    (I also know I can get the desired effect to work by creating a method on a backing bean to grab the selected row from the table and invoking my custom checking logic on it. However, I wondered if there was a better way to work with the ADFBC framework to accomplish this.)
    Thank you for reading my question.

    One way of doing it might be to create a transient attribute in your VO that returns true or false based on whether the row can be deleted.
    Then in your page have the disable property of the button based on the value of this transient attribute.

  • Is it possible to customize dff's with the help of form personalization?

    Is it possible to customize dff's with the help of form personalization.
    I have added few dffs in a form which users want to be customized according tho their choices.
    Can any one help me in this.

    Pl see MOS Doc 420518.1 - section 10

  • Set automatic billing reminders: is it possible to customize preferences?

    Is it possible to customize preferences for when you will receive billing reminders? I found that the default setting reminded me too far in advance, and then only after I was late on a payment. If I could customize when I would receive the email reminders, then I would switch back to online reminders only, instead of paper. I find a week notice is optimal for me, and then if I haven't paid two days before the bill is due, I would also want a reminder.

    Hi Keisei,
    Are you doing this transaction in ME21N?  You may want to post your question in the MM community.
    Regards, Mike

  • Is it possible to customize the email heading (subject) when using a email submit button

    I have created a button for inserting a completed form into an email. Being the button auto inserts is it possible to customize how the button
    titles the email & subject upon insertion?

    You can have more control on the email subject/ to and CC Email address, if you use a regular button and place the code in the click event.
    Refer to the attached sample below.
    https://acrobat.com/#d=HouRLov3lOntSbqAfsr5Hg
    Thanks
    Srini

  • Is is possible to customize movie genre options?

    is is possible to customize movie genre options? At the moment there are a limited amount of options for genres in itunes. I have several more genres than are accounted for ie comedy drama as well as comedy, for which I would like to set a custom icon . I would also like to, for instance, set a genre for a specific movie star. Not giantly important in the scheme of things of course, but it would look much nicer in apple tv.
    any suggestions appreciated.
    thanks

    See this article for the instructions: http://blogs.oreilly.com/digitalmedia/2008/09/custom-genre-artwork-for-itune.htm l

  • Is it possible to customize aspect ratio?

    I have a video of scrolling text that I want to project across the top of the back wall of a theater for a performance, like supertitles (or surtitles) at the opera.  Very wide, very short, like a row of text.  so the aspect ration needs to be something crazy like 11:1.   I made the video in final cut/live type, but can't find a way to customize the aspect ratio and every program I find online that can crop out the black area without information RESIZES the **** thing to a standard format.  this is so easy with a photo.  Is this possible?  can I do it in final cut or something I can find online?  or do i need something like isadora?
    btw, i have the image running through a trip-head converter running from my computer, so it's acting like a display with a ratio of something like 48:9, so If i could get the file to a very wide aspect ratio it would totally work.
    thanks for your help!

    Pl see MOS Doc 420518.1 - section 10

  • Is it possible to customize the GUI of a WIA microdriver?

    Hi,
    I've downloaded the WIA sample drivers and I'm developing a WIA microdriver using the sample as my starting point. One thing I'm having trouble with is the interface, I would like to get rid of the last two buttons and the quality adjustment text if possible,
    keeping only color and grayscale picture, but i have no idea where to change it. I've tried changing the SupportedDataTypes in the pScanInfo structure to only color and grayscale to no avail.
    Here's what my interface is looking like:
    Any tips where should I look so i can customize the interface?

    WIA micro-drivers are a deprecated model which is still supported for legacy device compatibility. The model offers only support for WIA 1.0 (Windows XP) and is limited in functionality
    even compared with real WIA 1.0 mini-drivers (mini-drivers which could replace the common WIA 1.0 Scan Dialog shown here with their own UI Extension Dialog).
    Recommend for the developer to consider moving to a WIA 2.0 mini-driver. If using one of the WDK driver samples as a template (wiadriverex or prodscan) such driver development
    should not that be very much complicated over a micro-driver, without any of the micro-driver limitations.
    The two mentioned WIA 2.0 driver samples in MSDN:
     https://code.msdn.microsoft.com/WIA-Microdriver-1972b1c5
    Sample
    Description
    PRODUCTION SCANNING WIA 2.0 DRIVER  
    The ProdScan directory contains a   sample WIA 2.0 mini-driver. This sample shows how to add Production Scanning   features to a WIA 2.0 mini-driver.
    EXTENDED WIA 2.0 MONSTER DRIVER
    The Wiadriverex directory contains a sample WIA 2.0   mini-driver. This sample shows how to write a WIA 2.0 mini-driver that uses   the stream-based WIA 2.0 transfer model. It also
    shows an implementation of a   very simple segmentation filter, image processing filter, and error handling   extension for the WIA 2.0 mini-driver.
    Best regards,
    Marius

  • Is it possible to customize audit summary view - CRM 2011

    Hi,
    Is it possible to modify or customize the default "Audit summary view" of Auditing in crm 2011?
    Apart from enabling or disabling filters, i don't see any options to modify the view so that i can add more columns or remove few columns from the default view?
    Please do share your valuable inputs.
    Thanks.

    Hi,
    Existing audit logs can be viewed by navigating to Settings -> Auditing -> Audit Summary View. The
    resulting view is fixed by the system with predetermined columns that display the date and time of the event, the type of event, who made the change, the record effected by the event, the corresponding entity type and the operation performed.
    This data cannot be exported to Excel like the standard grids. To assist in finding relevant data, filters can be enabled for all the columns except the effected record column; this works similarly to the corresponding functionality in Excel. Selecting an
    individual audit record will provide additional details for the given transaction.
    So we can't change this system view.

  • Is it possible to customize thick-thin-thin layout myself?

    May I know whether it is possible to customise the layout myself instead of using the default layouts provided by ips (e.g thin-thick, thick-thin etc.)
    Thank you.

    I have tried to search in Administration Guide and Programmmer Reference of iPlanet Portal Server 3.0, but I cannot find anything about DesktopServlet.
    Where can I find "guide" for customizing the DesktopServlet?
    Where can I find DesktopServlet anyway?
    Actualy I want to customize the total width of thin-thin-thin lay-out to a fixed pixel witdh (instead of 100% as it is now).
    Thanks in advance.

  • Is it possible to customize TM theme?

    Hi,
    I like to customize my Mac, and my last, probably not possible, idea was to try to change the Time Machine Vortex theme with let's say a moving Spiral (kind of Austin Power's back in time machine). Well, it's just an idea, maybe better will arise ... but I don't know if it's possible.
    I found the folder where all images are saved (in Snow Leopard, I think in Leopard it was elsewhere):
    HD>System>Library>PrivateFrameworks>Backup.framework>Versions>A>Resources
    I haven't tried to change whatever cause my knowledge in this thing is not very big. And thus I'm writing here to ask if somebody managed this delicate operation. If yes I would appreciate if one can share the procedure.
    Thanks in advance,
    Sharlo

    Backup the contents of the folder first. However, after that, it's safe to replace any of the images in there with images of the same dimensions and format. As for the OpenGL code in there, I don't know what will happen if you change it.

  • Having the possibility to customize the name of the backup directory

    Hello,
    New user of lightroom v3.3, i noted the impossibility to customize the name of the backup directory.
    it's a plain full text with "importé le 10 janvier 2011" for example wich is not the best way to store to retrieve old photos.
    is it possible to have à traditional "importé le 2011-01-10" for example so that the directory will folow theimselves hystoricaly?

    I agree that would be preferable.

Maybe you are looking for