Is it possible to fill item number on a PO autocreated from PR?

Hi,
I have created a non-catalog PR (i.e. without item number) and then autocreated to PO.
On the PO, the item number field is protected. Is it possible for me to fill the item number? Thanks.
Regards
Leo

Hi Leo,
yes,I think you can modify the requisition lines during "autocreate" process to PO.
Make sure the profile "PO: Restrict Requisition line modify to quantity split" to NO.
pls see the note below:-
Use the Modify Lines window to split an existing requisition line into multiple requisition lines that represent the same or different items. For example, if the requisition line quantity is so large that a single supplier cannot fill the entire order by the need-by date, then you need to fill this order from more than one supplier. On the other hand, if you have a requisition line item that contains parts that you want to order as unique items, you can explode the requisition line into several lines. After you modify a requisition line, you cannot modify the new requisition line(s) again.
Note: You cannot modify requisition lines for outside processing items and when you are using encumbrance accounting or budgetary control.
Thanks
-Arif.

Similar Messages

  • Item Number not getting copied from Delivery to Invoice

    Dear Experts
    I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is  not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
    Please advise

    Hi,
    In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
    Regs

  • No goods receipt possible for purchase order Number and Item number.

    Hello experts,
    When I create a Goods Reciept with reference to Purchase Order using BAPI_GOODSMVT_CREATE, the following error message appears.
    No goods receipt possible for purchase order <PO number> <line item number>.
    But the GR is getting created manually using Transaction MIGO for the same PO number.
    I found some blogs to check for deletion indicator and Movement type and quantity, when I searched SDN for the same Issue.
    In my case 
    1.deletion indicator is not set for the Purchase order line items
    2.And Movement type is 101
    3.And gm_code is 01.
    Could anyone please suggest me, what else could be the reason for this error?

    Here is the code what i have written.
      f_gmvt_header-pstng_date = sy-datum.
      f_gmvt_header-doc_date   = sy-datum.
      f_gmvt_header-pr_uname   = sy-uname.
      f_gmvt_header-ref_doc_no = p_ebeln.
      f_goodsmvt_code_tmp        = '01'.
    * Looping the PO details.
      CLEAR: gf_item,f_gmvt_item.
      LOOP AT gt_item INTO gf_item.
    * fill the bapi item structure details
        f_gmvt_item-material   = gf_item-material.
        f_gmvt_item-plant      = gf_sbms-werks.
        f_gmvt_item-stge_loc   = '0001'.
        f_gmvt_item-move_type  = '101'.
        f_gmvt_item-po_number  = p_ebeln.
        f_gmvt_item-po_item    = gf_item-po_item.
        f_gmvt_item-entry_qnt  = gf_item-quantity.
        f_gmvt_item-entry_uom  = 'PC'.
        f_gmvt_item-entry_uom_iso = 'PCE'.
        f_gmvt_item-po_pr_qnt = gf_item-quantity.
        f_gmvt_item-orderpr_un = 'PC'.
        f_gmvt_item-orderpr_un_iso = 'PCE'.
        f_gmvt_item-no_more_gr = 'X'.
        f_gmvt_item-ref_doc    = p_ebeln.
        f_gmvt_item-prod_date  = sy-datum.
        f_gmvt_item-mvt_ind    = 'B'.
        f_gmvt_item-move_reas  = '101'.
        f_gmvt_item-vendor      = gf_lfm1-lifnr.
        APPEND f_gmvt_item TO t_gmvt_item.
        CLEAR f_gmvt_item.
      ENDLOOP.
    * cALL THE bapi fm FOR gr POSTING
      CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header               = f_gmvt_header
          goodsmvt_code                 = f_goodsmvt_code_tmp
    *     TESTRUN                       = ' '
    *     GOODSMVT_REF_EWM              =
       IMPORTING
         goodsmvt_headret              = f_gmvt_headret
    *     MATERIALDOCUMENT              =
    *     MATDOCUMENTYEAR               =
        TABLES
          goodsmvt_item                 = t_gmvt_item
    *     GOODSMVT_SERIALNUMBER         =
          return                        = t_return
    *     GOODSMVT_SERV_PART_DATA       =
    *     EXTENSIONIN                   =
      IF sy-subrc = 0.
    * For commit the changes use BAPI_TRANSACTION_COMMIT FM.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
    *      MOVE: f_GMVT_HEADRET-MAT_DOC   TO WA_DET-MBLNR,
    *            f_GMVT_HEADRET-DOC_YEAR  TO WA_DET-MJAHR,
    *            f_GMVT_HEADER-REF_DOC_NO TO WA_DET-EBELN.
    *      APPEND WA_DET TO IT_DET.
    *      CLEAR WA_DET.
      ENDIF.

  • How to have a custom Item Number in Sales Order Items

    Hello Experts,
    We are creating a sales order using IDoc, sales order gets created but, its not taking value what we are populating in Item Number field for Item. Defualtly its filling 10,20 and so on...
    Is there any thing that I need to maintain, so that SAP accepts the custom number for Item number.
    Please help,
    Thanks,
    Suma

    Hi Suma,
    In VOV8, you can see the fields Number system..here u can see sub item increment u can enter 12 here then the next item number will be 500012, 500024 and so on. But if u want to maintain external number range then follow this steps.
    Determine which external number ranges are provided for the relevant
    document type. Choose the function "Maintain number range" of the
    document type (for example: Purchase order -> Maintain number range)
    for this purpose.
    Choose a number range and note its number.
    Enter the number of the desired number range.
    Thanks,
    Raja

  • Is it possible to add item description in the Alert screen in sap b1

    Please see the attachment for the alert screen that gets generated every time an item stock goes beyond the minimum or maximum level. In this screen is it possible to show the item number AND the item description so that the alert is easily understandable? (instead of drilling down into the item code to see each item which is what we are doing now)

    Hi Vedanth
    Its a default system alert query that you had made active, you need to define a new alert to get desire.
    Regards,
    Bhushan Verma

  • Impossible to delete an item number of a PO of the previous year

    Hello,
    I have a question.
    Closing Operations (Carryforward of Open Items) were not made yet.
    We want to delete in 2011 an item number of a purchase order (created in 2010 with doc date of the year 2010).
    The System informs us that  It is not possible to change document in fiscal year 2011 because the document was updated as open commitment in fiscal year 2010 in Funds Management.
    System : SAP ERP 6.0 /7.0 - EHP 4 - FM BCS
    In our old  system SAP 4.7 enterprise (FM) , It was possible to delete an item number of a purchase order of a previous year (when Closing Operations (Carryforward of Open Items) were not made yet).
    Isn't it possible any more to delete in 2011 an item number of a purchase order created in 2010 before Closing Operations ?
    Thanks for your answer.
    Fabian

    Hi,
    I believe, you have PBET activated. In this case, modification of the commitment should be indeed made in the same year.
    Regards,
    Eli

  • Different PO item number in SAP and in external system

    We are sending Purchase Orders to external system via Idoc and receiving dispatch advices (Inbound delivery) from the external systems via Idoc. In SAP PO line items are numbered as 10,20,30....... In the external system the line items are numbered as 1,2,3........
    So when Inbound delivery is received into SAP from external system it is failing due to line item numbers are not matching.
    I got info that this issue can be resolved by using fields E1EDL24-POSNR and E1EDL24-POSEX correctly. I do not know exactly how.The Idoc type used is DESADV.
    Please help with this issue.

    You can see these fields in WE02 when you process with your idoc number.If you want to edit idoc POsnr from 1...10 then you can edit idoc through we19 transaction.
    If you want perminanat solution then check with ABAPer to pass one zero after line item number as your external system passes 1,2....10..etc.
    This can possible check with your technical team.

  • Work item [item number] cannot be executed

    Hi all, I am having a problem with a workflow.
    I am emailing a url to a supervisor to approve or reject a training request.
    When I access the url in internet explorer I get a pop up message with the error, "Work item [item number] cannot be executed."  I have the task set as a general task so anyone could be a possible agent. 
    Does anyone have any idea what the problem could be?
    Thank you,
    Nick Simino

    Hi Nick,
         I too getting the same error that the same you got earlier as <b>Work item [item number] cannot be executed</b> . Can you please tell me how you have resolved it.
         Also one more thing while clicking on Reject or Approve button, there a script error comes at the bottom left corner. On double-click this script error, it gives the message "Access is Denied".
        Can you help me on this issue.
    Regards
    Deep

  • Any suggestions for the ITEM NUMBER field

    We sell DVDs, Books, CDs, etc. for which we have item groups setup.
    We are using the ISBN based EAN barcode for the bar code field.
    Any best practices for coming up with the ITEM NUMBER naming convention that people have for us.
    Currently we use the short form title of the DVD or book to denote the item number.
    Mike

    Hi Mike,
    There are always pros and cons for something like Item Code convention.
    In my experience, I would like to make them in the same length whenever possible.  Because they are internal codes, they should be easier to be used for both technical and non-technical users.  Sometimes you might not be able to make both parties happy.  In that case, you have to give up something to compromise.  The most important above all is to eliminate any duplicated codes.  You will find that could the most difficult job if you give more users the abilities to create Item Code.  If that is a must for your business, more training will be needed for all those users.
    Thanks,
    Gordon

  • Can i increase the Item Number Length ?

    Hi All,
    Is it possible to increase the length of the item number in Item Master from 20 Char to say 40 Char?
    Regards,
    Sankar

    Hi Esakki,
    Unfortunately what you are asking is not possible nowadays. Don´t know if in new versions is planned to increase it.
    Regards,
    Ibai Peñ

  • Is it possible  to refine "Item as database column"  by post....

    hello
    Is it possible to refine "Item as database column" by post calculation regrading that it is not effected by update process
    number of items is more than I use query, as a result I would prefer use database column.
    regards
    Edited by: sak on Jul 5, 2010 12:00 PM
    Edited by: sak on Jul 5, 2010 12:01 PM
    Edited by: sak on Jul 5, 2010 12:05 PM

    If you perform any post calculation on a "database column" that amounts to a "change" in value and hence is detected as a change by the ApplyMRU process.
    You may have to write custom MRU for this where you handle the "meaning" of update the way you want it.
    Regards,

  • Is it possible to pass personnel number in BAPI_ACC_INVOICE_RECEIPT_POST

    Hi All,
    We are using an external document image system where we scan and code vendor invoices. To send the invoices to our SAP system we will use BAPI_ACC_INVOICE_RECEIPT_POST. Unfortunately we are missing the possibility to pass <b>personnel number</b>. This is an important attribute for us, e.g. with learning and education cost. Is there a simple way to pass this information?
    Regards,
    Gerrit

    Hi Romeo,
    In BAPI_ACC_DOCUMENT_POST table EXTENSION1 is available. Fields you want to pass, but which are not available in one of the other tables, you can pass via the EXTENSION1 table. In the User Exit of the BAPI you will have to map these fields to the required fields.
    For example, in BAPI_ACC_INVOICE_RECEIPT_POST we have now activated User Exit ZXACCU15.
    Source in the user exit:
    <i>* Post the personal number and partner bank type
    from the EXTENSION to the ACCIT data
    structure for the NL users only.
      DATA: wa_extenion LIKE bapiextc.
      DATA: wa_accit    LIKE accit.
      DATA: h_index     LIKE sy-tabix.
      LOOP AT extension INTO wa_extenion
                        WHERE field2 = 'PERNR'
                        OR    field2 = 'BVTYP'.
        READ TABLE t_accit INTO wa_accit
                           WITH KEY posnr = wa_extenion-field1(10).
        IF sy-subrc = 0 AND wa_accit-bukrs(2) EQ 'NL'.
          h_index = sy-tabix.
          IF wa_extenion-field2 = 'PERNR'.
            wa_accit-pernr = wa_extenion-field3(8).
            MODIFY t_accit FROM wa_accit
                           INDEX h_index
                           TRANSPORTING pernr.
          ELSEIF wa_extenion-field2 = 'BVTYP'.
            wa_accit-bvtyp = wa_extenion-field3(4).
            MODIFY t_accit FROM wa_accit
                           INDEX h_index
                           TRANSPORTING bvtyp.
          ENDIF.
        ENDIF.
      ENDLOOP.</i>
    Table EXTENSION1 has 4 fields which you can use to your own needs. In my example we use field1 for the itemno_acc, the item number in the other table where the extension is needed. Field2 is the fieldname where the value (from field3) has to be placed. We do not use field4.
    Example
    FIELD1        FIELD2     FIELD3     FIELD4
    0000000010 BVTYP     USD     
    0000000020 PERNR     99999999     
    Unfortunately I do not know how to activate a user exit, because in our case it was already there.
    Hope this is of any help,
    Regards
    Gerrit

  • BOM - Item Number (Urgent)

    Hi All,
    In BOM (CS03), the first column refers to BOM Item number & i find it having 4 digits at the moment. I would like to know is it possible to increase this to say 6 or 8 digits, if it is possible, please let me know how i can do the same & also what is the limit for the same.
    Hope my problem is clear, await inputs.
    Vivek

    Dear Vivek,
    I'm not sure abotu this,but the increment which's default as 0010,0020 can be
    changed as per the user Id.That's what Mr.Vijayprasad Shanmugham has
    mentioned which can be done in OS29.
    If possible try to post this thread in ABAP forums,I hope they can give a better
    solution for this.
    Regards
    Mangal

  • Possible events or items that trigger an Mail notification on iphone 5?

    What are the possible events or items that trigger a Mail notification to be sent to my iphone5?  I have the Mail notification set to "on" and set up as a banner and wondering what the potential list of notifications can be beyond that a new message was received (with a little preview of the msg) or that I have a certain number of unread messages? 

    Hello WPBIL,
    If you enable Alerts for Mail, it will provide you a notification for just new emails.  I recommend reviewing the following resources for more information about Notifications. 
    iOS: Understanding Notifications
    http://support.apple.com/kb/HT3576
    You can also find information on page 28 of the iPhone User Guide:
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Autocreate item number within a number range

    A newbie question:
    Can SBO auto generate an item number when the user adds a new item via the Item Master Data screen? Is it possible to define this number within a number range?

    As Harold says, with formatted search you can do many nice things...
    Also take a look at the <a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/tsqlref/ts_aa-az_3ied.asp">Trans-SQL reference</a> (if you are using SQL server as a database server), here you can find loads of information about the Trans-SQL language of SQL server...

Maybe you are looking for