Is it possible to get 2-ch signals from TDS2012 oscilloscope at the same time with LabVIEW "7.0"?

Hi, everyone.
I've been trying to get the signals from 2-ch of Tektronix TDS2012 oscilloscope at the same time using IVI connection with LabVIEW "7.0"
I've already searched this developer zone for the answer.
I've tried the famous example: "IviScope - Acq Dual Wfm Edge Triggered.vi"
and it gave me the error message like:
Error -1074110451 occurred at IviScope Initialize With Options.vi
Possible reason(s):
Driver Status:  (Hex 0xBFFA600D) Primary Error: (Hex 0xBFFA600D) The Config Server module is not present on the system.
I think I've installed all~ the required softwares for IVI. For example, ICP 2.2, IVI engine 2.0.46, and tktds1k2k ivi (instrument driver for tds2012, in fact this one is for LabVIEW "7.1"... :-P)
TDS2012 and my computer is connected through HPIB(GPIB) and it is shown on the MAX (a GPIB instrument as well as an IVI hardware asset)
I've tried GPIB connection but it gives me asynchronous signals...
Is it possible to get 2 signals at the same time with LabVIEW 7.0(not 7.1 or higher) by any means?
What in the earth is the "Config Server" in this case?
I don't need to sticking to IVI and any method to achieve my goal will be welcome.
Could anyone give me the hint for this problem, plz?

I think your problem is that the instrument specific driver is version 7.1 and you are using the class driver with 7.0. You can create your own 7.0 driver by downloading the LabWindows driver and using the Import CVI Instrument Driver under the Tools>Instrumentation menu.
Since you don't seem to have a good reason to use IVI, why don't you try the native LabVIEW driver at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9139659CE034080020E748.... I believe you have all of the functions to setup each channel and then when you trigger the scope, both channels will be captured. You would then transfer each waveform separately. The data is always read sequentially but that's not important as long as both channels are triggered at the same time.

Similar Messages

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • How to check 6 digital signals change value at the same time with PCI-6229??

    I am using DAQ card PCI-6229.
    Channel 1 generate a digital signal.
    Channel 2,3,4,5,6,7 acquire digital signals.
    I want to check:
    1. Whether the rising edge of Channel 2,3,4,5,6,7 occures at the same time;
    2. The time delay from the rising edge of Channel 1 to the rising edge of Channel 2,3,4,5,6,7 is within a certain range.
    I know I can use counter to get the two edge seperation time delay. But I only have two counter, it is two time-consuming if I check one by one.
    I don't know how to check the rising edge of 6 different channels occure at the same time.
    Does anyone has any suggestions?
    Thanks

    Hello,
    You can use the DAQ card's digital input change detection circuitry to detect changes in the input, you can then use a counter to measure the relative time between samples. Please read Page 6-9 DI Change Detection Applications for more information. Let me know if this helps
    Christian A
    National Instruments
    Applications Engineer

  • Getting two midi threads to start at exactly the same time

    Hello, is it possible to get two threads to start at exactly the same time because when I start two threads or more at the same time that playback midi using a synthesizer, they never start at exactly the same time.
    Any help would be appreciated.

    Use the Behavior framework for making changes in the scene. This uses an internal j3d thread which is in sync with the rendering thread.
    See chapter 4 (Interaction) and 5 (Animation) in the 2nd module of the j3d tutorial (this may not be the correct chapters, since i have a rather old version of the tutorial)

  • TS2972 I would like to share my iTunes libraries with my Apple TV from both my iMac and Macbook Pro, but I use the same iTunes account on both devices. Is it possible to link my Apple TV to both devices at the same time?

    I recently purchased an Apple TV, and I currently have it linked to my iMac with my iTunes account. I also have a newer MacBook Pro that has some different iTunes media on it than my iMac does, but they share iTunes accounts. Is it possible to link both devices at the same time, have access to media on both computers, and use the same iTunes account on both computers?? It seems Apple TV will only link to one iTunes account per computer, but can access multiple computers if different iTunes accounts are activated on those computers.

    You can share multiple libraries with the Apple TV, they don't even need to use the same iTunes account. Just make sure that you use the same ID for homesharing on all devices.

  • Is it possible to have a german/american i tunes account at the same time?

    I have a german itunes account.  Is it possible to have an american itunes account at the same time?

    Not at the same time, but you can create two seperate Apple IDs.

  • Is it possible to realize two different processes in the same time with TDMS?

    Hello all,
    we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
    Thanks in advance!!!
    Ilkin Mammadov

    Hello Anita,
    I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
    Thanks in advance!
    Best regards,
    Ilkin

  • Cannot get push notification 3g/wifi turn on at the same time

    Dear all,
    our mail server is lotus notes traveler and iphone is iphone4 running iOS7.
    when turn on 3g and wifi at the same time, e-mail is'nt pushed.
    3g is vodafone and wifi is our company's network.
    if turning on either 3g or wifi , it works well.
    There are always these "Domain=NSURLErrorDomain" error , error code comes up with1001,1009,1044.
    Of course travelserver is runnning, I guess the problem is iPhone cannot resolve DNS, connect to server, and so on but I'm not sure.
    Does anyone ever encounter before ? Do you have any idea ?
    Apr  3 09:06:58 test-iPhone MobileMail[115] <Notice>: 0x14d3fd70|EAS|Error|[ASGetOptionsTask 0x14d9f060, conn 0x14d66c50, request 0x14d39580] connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x14df62e0 {NSErrorFailingURLStringKey=https://travelerserver/traveler/Microsoft-Server-ActiveSync, NSErrorFailingURLKey=https://travelerserver/traveler/Microsoft-Server-ActiveSync, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x14f4a170 "The request timed out."}
    Apr  3 09:06:58 test-iPhone MobileMail[115] <Notice>: 0x14d3fd70|EAS|Error|ASGetOptionsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x14df62e0 {NSErrorFailingURLStringKey=https://travelerserver/traveler/Microsoft-Server-ActiveSync, NSErrorFailingURLKey=https://travelerserver/traveler/Microsoft-Server-ActiveSync, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x14f4a170 "The request timed out."}

    Hello,
    What you report has been noticed by many others, and when coordinated with others it gets even stranger -- many people, in different parts of the world, with different BB10 devices, on different carriers and OS levels, all experience this symptom all at the same time. It is very odd.
    Usually, it just lasts a few seconds or minutes. But, about 48 hours ago (a little less as I recall), there was an extended outage...about 4 hours by the count of some I know.
    BB is aware, but that's all we know at this time.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Possible to be logged in on iPhone and computer at the same time?

    I use Beejive on my iPhone. And iChat on the iMac.
    I have checked allow multiple logins in iChat. But whenever I try to login say on the iPhone and iChat is open on the iMac, it tells me I'm logged into to two places and closes me out of one.
    Is it possible to be on both at the same time?
    Thanks

    JNo Problem.
    For the points
    7:56 PM Thursday; October 22, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Is is possible to open event lists from different tracks at the same time in Logic Pro 9?

    Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9?
    When I switch between tracks the event list swiches as well. Thanks in advance.

    If you deselect the litte chain link icon in the event list window, it will no longer follow your region selection and you can openas many as you need. Also you can select multiple regions and see the inthe SAME window if you select to show multiple regions, and you can have the notes shown in their respective track colors.

  • How do I get all 'exclamation point' songs to show at the same time?

    Please help!
    I need to delete TONS of broken tracks... they have all been reimported, but
    the same old tracks with the exclamation points remain in my library!
    What's even worse is you have to click on each individual track, just to get them to show whether they have the exclamation point? There has got to be an easier way!
    Does anyone have any suggestions on what i can do to make ALL the tracks that are broken, show their exclamation points?
    Thank you!

    Hi
    Maybe you can solve your problem by executing the following action :
    +Open iTunes in "safe mode" (without external plug-ins) by using the keyboard shortcut Command-Option (while opening iTunes).+
    This will open iTunes in safe mode, which disables some plug-ins ...
    But normally all exclamation marks will disappear ... at least it solved my problem.
    I hope this helps

  • I cannot get ics calendar invites from Outlook to display the correct time in iCal even though the correct time is in the description. This seems to be a common problem but I cannot find an answer. Please help.

     

    I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work.  So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

  • Possible to use stsadm export / import to copy subsite to the same site with diff subsite name?

    In the same site is that possible to use stsadm export/import to copy subsite to a new diff subsite name?
    I do not want to use the SaveAs Template method, I need command mode.

    You should create an empty site.
    Go to your site collection and click siteactions --> new site --> Select custom template, click create.
    Here you choose meeting2 as Title/url
    Now execute your import command (Import-SPWeb http://vee:111/meeting2 -Path
    C:\temp\meeting_exp.cmp -UpdateVersions -Overwrite) 
    Now wait, when the import is finished, check your site!
    That should do it.

  • HT5517 is it possible to send audio out to remote airplay speakers at the same time using Atv wired(optical) speakers?

    i like to listen to music in the living room and bedroom simultainiously from my home theater and a set of airtunes connected speakers using a mac mini.
    Is this possible with an Apple TV/home theater/APxpress setup?
    airport does show in Atv as a speaker option

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

Maybe you are looking for

  • TM drive does not always mount when reconnected

    Forgive me if this has been covered, but I could not find it in the archive. I am using a Fantom 500GB drive for backup from my laptop. Every few days, when I reconnect the drive, it will not mount and backups will not happen. The drive is both Firew

  • Re: alv line selection

    Hi,        Iam using user command routine to select the selected field value from the alv-list. My requirement is to get the all the selected line values. How it is possible. rgds p.kp

  • Create trigger to execute report upon pressing enter

    Hi, I have a screen where users input a vendor number and then have to click the execute button to view the report. I want to create some sort of trigger so when the user presses the enter button the program will execute instead of having to press th

  • Default Sold To Party and Message Processor on a Message

    Hi All, I have 2 questions on here regarding Service Desk. I have set a BP as Sold To Party in tcode BP and maintain its address. In IB52 transaction I already set the respective BP as sold party to all satellite system. Somehow when I create the mes

  • HT1711 Bookstore on I Pad goes to a German Book Store instead of an American one - please help

    I have my I pad (purchased in the US) about 6 month ago. I live in the US but was in Germany for about 2 weeks. Since then my Bookstore goes into a German Bookstore instead of the American one. Anybody know how to switch it back to "normal" ?