Is It Possible to Maintain Composite Tax in TAXINN

Hi All,
I am working for Consulting Company in India,Which is implementing SAP for their Business Transactions. The Requirement is , we need to implement Service Tax as well as VAT (Value Added Tax) For the company. How can we map the composite Tax (Service Tax + VAT) in TAXINN- Condition Based Tax Procedure. Is it possible???
Thanks in Advance
Regards
Ram

would it be possible to do a caculation field then ? if I create a number field and add some kind of caculation rule, i've noticed that other form websites do this.

Similar Messages

Is it possible to use a tax code in FB60 but which does not post any tax?

Hello Gurus,
Can you advise if it is possible to configure a tax code which can be selected in FB60. But we want this tax code not to post any tax value in SAP but simply to be allowed to be selected and populated in the doucment. In FTXP a tax code can be setup that does not need to have a tax rate % maintained against it or be linked to a GL account. However, this tax code cannot then be used in FB60 as the system asks that a rate is maintained and then that an account must be maintained.
Can you advise if it is possible to maintain a tax code in such a way that it can be selected in FB60 but does not result in any tax posting to any tax account? We want it so that no value is posted, so even a 0% rate would not be good.
Thanks for any ideas on this.
Mart

If you set up 0% tax code, system will NOT post any entry to GL account. You can use the tax code in FB60 & MIRO & PO too.
thanx

Is it possible to maintain table data in a maintenance view

hi all,
is it possible to maintain data in a table by using maintenance view.

Hi,
if you maintain texts of your objects in different languages it's better to use a maint. view:
example
1) ZTAB01 - CU-Data
2) ZTAB01T - texts to CU-Data
3) ZTAB01_V - maint.-view of 1) and 2)
hope that helps

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain multiple pymt frmts with in a single prgm 11i

Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Is it possible to add VAT (TAX) in the order form and discount codes ?

Is it possible to add VAT (TAX) in the order form and discount codes ?

would it be possible to do a caculation field then ? if I create a number field and add some kind of caculation rule, i've noticed that other form websites do this.

LSMW - RMDATIND - You have not fully maintained the tax classifications

Hi,
I am trying to extend existing materials to new sales organization through LSMW and direct input. I have only one file containing a "header" for the material general data, and "line items" to manage material taxes for other countries than the one defined for the current sales organization.
I have created 2 nested structures as following:
ZMATERIAL_ALL (parent structure)
          |__ ZMATERIAL_TAXES (child structure)
In the structure fields, the first field is the header or line identifier:
ZMATERIAL_ALL
          |__ HEADER -> With Identifying Field Content = H
          |__ ZMATERIAL_TAXES
                |__ LINE -> With Identifying Field Content = L
Header and line item have a common field MATNR and VKORG. ZMATERIAL_ALL contains data for sales org GI37, Japan. ZMATERIAL_TAXES contains data for France taxes (sales org GI10).
The structure of my file is the following:
H
MATNR
VKORG
VTWEG
SPART
WERKS
DWERK
VERSG
KTGRM
MTPOS
MTVFP
LADGR
J_3APIND
VMSTA
VMSTD
DISMM
DISPO
DISLS
FHORI
MRPPP
PLIFZ
J_3AMSTATC
TATYP1
TAXKM1
L
MATNR
VKORG
ALAND1
TATYP1
TAXKM1
ALAND2
TATYP2
TAXKM2
In LSMW step 5, I associate ZMATERIAL_ALL structure tax values to BMMH1, because this taxe correspond to the tax for the current sales org defined in the current country:
TATY1          Tax category (sales tax, federal sales tax,...)
                    Source: ZMATERIAL_ALL-TATY1 (Tax category (sales tax, federal sales tax,
                    Rule :   Transfer (MOVE)
                    Code:    BMMH1-TATY1 = ZMATERIAL_ALL-TATY1.
TAXM1         Tax classification material
                    Source: ZMATERIAL_ALL-TAXM1 (Tax classification material)
                    Rule :   Transfer (MOVE)
                    Code:    BMMH1-TAXM1 = ZMATERIAL_ALL-TAXM1.
Then in BMMH2, I associate tax values from ZMATERIAL_TAXES structure:
__END_OF_RECORD__   After Using Conversion Rules
                    Rule :   Default Settings Modified
                    Code:    bmmh2-aland = zmaterial_TAXES-ALAND1.
                             bmmh2-TATY1 = zmaterial_TAXES-TATYP1.
                             bmmh2-TAXM1 = zmaterial_TAXES-TAXKM1.
                             transfer_record.
                             bmmh2-aland = zmaterial_TAXES-ALAND2.
                             bmmh2-TATY2 = zmaterial_TAXES-TATYP2.
                             bmmh2-TAXM2 = zmaterial_TAXES-TAXKM2.
                             transfer_record.
In LSMW step 7, I specify my single file with option "Data for multiple source structures".
In step 8, I assign my file to both ZMATERIAL_ALL and ZMATERIAL_TAXES structures.
In step 9 and 10, I can successfully read and display data. ZMATERIAL_ALL and ZMATERIAL_TAXES structures are well populated.
The conversion is ok, then I run the RMDATIND program to perform the material creation.
The result is "You have not fully maintained the tax classifications"
Any idea what I am missing ?
Thanks in advance for your help.
Thibault

The solution was to implement SAP Note 1730652, and it solved the issue !
This was a standard SAP issue, and not an implementing issue.

How is ist possible to maintain the time dependencies for Abap Privileges?

How is ist possible to maintain the time dependencies for Abap Privileges?
In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
Can anybody give us a hint?
Thank you in advance !!

If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
This works if you imported your footage from a camcorder, either miniDV or AVCHD.
However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
However, there is a trick to getting even these clips to display timecodes if you know the start time.
First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
Then import the clip into iMovie. You now have timecodes at the playhead.

Is it possible to maintain versioning of portal contents edited/created ?

Have few doubts about weblogic portal 9.2
1]Is it possible to maintain versioning of portal contents edited/created?
2]Can portal presentation mechanism hide selected output fields?
3]How will Presentation service support storage of view state in a repository?

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Can we maintain diff tax codes for one tax condition type in creating CRs

Hi Gurus,
Can we maintain diff tax codes for one tax condition type during maintaining of Condition Records. (Taxes)
For example in VK11 screen for different combination of tax classification for customer and tax classification for material and
tax codes like P0, P1, P2 etc. If so which tax code will be picked during creation of sales order? Pls help me........
Regards.......Divakaran

Hi Karan,
Yes we can.
For example you have three tax code
P0 -- 0% (Fully exempt)
P1-- 5% (Half tax)
P2 -- 10% (Full tax)
Now when you create the condition record then you have to create the three condition record for one condition type
MWST
Country -- tax classification of customer -- tax classification of material -- Tax % -- Tax code
IN -
> 0 (Tax exempt) -
> 1 (Full tax) -
> 0 -
> P0
IN -
> 1 (half Tax ) -
>1 (Full tax) -
> 5% -
> P1
IN -
> 2 (Full Tax ) -
> 1 (Full tax) -
> 10% -
> P2
Hope it helps,
Regards,
MT
Edited by: M T on Mar 23, 2010 4:19 PM
Edited by: M T on Mar 23, 2010 7:27 PM

Is it possible to maintain the multiple address in the Vendor Master (XK01)

SCENARIO:
Vendor ( Ex.VEN) Address maintained in the SAP Vendor Master is the Corporate Address (M).
But I want to maintain delivery address as Address (X) and Remit Address as Address (Y) and
Billing address (Address on Invoice/Bill) as Address (Z).
Is it possible to maintain as mentioned in SAP Vendor Master (XK01)?
Please suggest, How can we go head and release the PO in the above scenario?
Regards,
SB

This can be easily acheived by Partner Functions
1.VN Vendor
2.SP Sold to party
3.SH Ship to Party
4.IP Invoicing Party
5.Delivery address
Please refer below link from help.sap.com
Partner Roles in Purchasing
http://help.sap.com/saphelp_470/helpdata/en/a1/7b373944f7a97ce10000000a114084/content.htm
regards,
Lalita

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

In the US I have not seen a state that allows an individual to claim tax exemption...that is reserved for authorized institutions like public school systems. Only certain states do not have no-sales tax laws. When I lived in France, to be free from VAT one had to be a non-citizen and would be reimbursed for goods that were shipped out of the country upon exiting the country...not while still residing there. That was pretty typical of other European countries at the time, Pre-EU days, that is.

Is it possible to maintain moving average price u201CVu201Dfor HALB & Costing ?

Dear Gurus,
is it possible to maintain moving average price u201CVu201Dfor HALB Material which can procured from vendor & produced from plant in-house & costing the same ?
Kindly help

1. Yes, you can have price control as "V" for HALB material.
2. Split valuation is required to be maintained, if you want to use the same HALB material for procurement as well as inhouse production.
3. You can have standard cost estimates with price control as "V'. But, the same is not recommended by SAP. It can give a wrong picture in scenarios like settlement of a production order having GR quantity more than the Stock quantity.

Is It Possible to Maintain Composite Tax in TAXINN

Similar Messages

Maybe you are looking for