Is it possible to make a new entry in PSA.

I found in Mange option, that the fields can be only updated or deleted. But, is there any possibility of making a new entry into it.
Hitesh

Hi,
Please check whether the following link helps you:
http://help.sap.com/saphelp_nw04/helpdata/en/ca/42453855325e0ee10000009b38f842/content.htm
Thanks & Regards,
Sapna

Similar Messages

Is it possible to make an iCal entry "blink"?

Is it possible to make an iCal entry "blink" -- that is, turn on and off to attract one's attention to it?

Roger:
Thanks for your prompt answer. Even though it's not currently supported, I think it'd be a nice feature to have -- to "highlight" a very important to-do on one's calendar.
Mike

I bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

i bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

Is it possible to make the new iTunes look like the older version, which actually worked?, Is it possible to make the new iTunes look like the older version, which actually worked?

The current version of iTunes is rubbish. Half the time when I try to drag and drop new items to my iPod I get an error message. Why? It is not obvious how to create playlists, then when you finally manage do so using the top menu, you click 'Done' and it disappears. ***? This is a dog's breakfast and the developer should be sacked.
Apparently it is possible to set it up so that it looks and behaves like the earlier version, which worked fine--devices and playlists all appeared in fixed position o the left-hand-side men (why mess with this tried-and-true formula?). But I can't work out how to do this. Would appreciate some guidance.

It is very similar to the old version.
Just select the sidebar to be visible and it is mostly like the old version.

Mini iPad calendar has no "new entry" key. How do I make entries

I have a new mini iPad, the calendar has no "new entry" key. How do I make a new entry. I have an iPad 2, it has the same OIS 6.0.1 and it has the "new entry" key on the bottom right of screen. The settings on both are identical, yet the mini hasn't got the option of entering an event.

Does it have a "+" button in the upper right of the calendar?
If so, that should do it.

How to save multiple new entries in one shot?

Hi,
I am working on a pretty complex Create form. So apart from the standard form fields to allow user to enter the data, one of the sections in this form is a table which allows user to create multiple entries for this entity. And when hitting the "Save" button in this form, it will save all the data plus the multiple entries defined in this table.
Is it possible to create multiple new entries in a table, and then save all of the new entries at the end? My experience so far is only create and save one new entry at a time.
Any sample?
Please advise.
Thanks.
-Mina

Yes, I am using ADF BC.
Let me explain more in details of the scenario:
I have a table with "Create New" and "Save" button. The "Create New" button's ActionListener is set to "#{bindings.CreateInsert.execute}", and the "Save" button's ActionListener is set to "#{bindings.Commit.execute}".
When the "Create New" button is hit, a new row shows up in the table to allow entering data inline. When the "Save" button is hit, it got committed. I would like to allow user to create multiple rows before committing. But currently, after I hit "Create New" button, then enter data, then hit "Create New" button again without committing, it gives error.
Since this table is part of a form with other fields, I would like to save/commit it until everything in the form are completed, including creating multiple rows in the table.
Any ideas how to achieve this?
Any comments are appreciated.
Thanks.
-Mina

Map with 500 pdfs. How to make a new file with only the first pages, new file with second pages etc.

Hi,
A client confronted me with the next question:
I have a map with 500 pdf's in it.
Is it possible to make a new file with only the first page of each pdf?
After that to make a new file with only the second page of each pdf?
And after that the third?
Etc.
Is that possible with an action?
Or are there scripts for?
I couldn't find them.
I use an iMac with Acrobat XI.
Any help is very welcome.
Thanks in advance.
Bornholm

You can extract each page from each pdf as a seperate page. Once this is done you can select the pages tocombine.
You would have to write custom a custom JavaScript and programatically code the names to combine if the extracted file pages habvestandars naming that could be programed. There maybe some security coding you will have to do because of Adobe restrictions but this all documented in the Acrobat JavaScript Reference.

Add New Entry to a blog

If I start a blog and "fix" the blog entry layout. Is there some way to save that so I dont have to re-design it every time i wanna make a new entry?

Perhaps I'm not using the right terms. Let me try and restate my problem.
I am now using the "Notebook" theme. I have already created some entries where I've changed the default "My Blog" and associated Latin on the yellow header on top of the page to what I want them to say (i.e., "Bill's Blog" and associated text). You can see an example of such an entry here:
http://www.billmarksteiner.com/BillMarksteiner/Bills_Blog/Entries/2007/8/27_Dell_repair..._MUCH_better_thanexpected.html
When I click on the "Add Entry" button, I get a page with a yellow border on top with the words "My Blog" instead of what I'd like, which is "Bill's Blog". The Title field and its associated blog entry text (again, Latin) is lower on the page, and I understand that this is necessarily pulled from the standard template because that is the main body of the entry, which one would need to edit to make a relevant entry. But I'd like to at least automate the header material on the yellow strip at top to say "Bill's Blog" instead of "My Blog", and have standard text up there that I create, not Apple.
I guess what I'm asking is if there is a way to edit the template itself so that hitting the "Add Entry" button creates a templated entry of my design. Or at least a templated entry containing my text vs. Apple's.

HT2500 How can I make a new template in mail stationery(OS 10.6.8) with my own logo and background?

Is it possible to make a new template with my own logo and background?

Welcome to Apple Support Communities.
Open Mail, Help
So, create your template from scratch or edit an existing Mail template and re-save it with a new name.
Your own saved or edited/re-saved templates are stored in the Custom list at the bottom of the Stationery types.
The default templates remain with original names in the original folders.
Then to use your template in a New Message, select it from Show Stationery, Custom.
To make it easier to select Stationery templates, first open Mail, New Message, View, Customize Toolbar, and then drag the Show Stationery button to the New Message toolbar. (It will not ever appear in the default Mail toolbar, only the New Message toolbar, and can only be added to the New Message toolbar.)

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

Kryan73 wrote:
… after I import a new file, I have to then go searching for it amid all the other files…
in a perfect world, you do know the recording date, and you simply scroll to that date.
in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
(I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

Possible to make a script for duplicating index entries?

I would like to make things easier than they seem to be.
I have several references (1:st level topics) already that are correct with page numbers and all that.
Now, I would like to create a 1:st level topic, under which I put "duplicates" of these already indexed references and put them as 2:nd level topics, under the main, 1:st level, topic.
Example.
Let's say I have these references (1:st level topics) already, with correct page numbers and everything:
Audi 4-6, 8
BMW 7, 21-24
Citroen 11, 12
Mercedes 80
Volkswagen 31-36
Okay, these are perfectly indexed and all the pages are correct.
Now, I would like to have these references as both 1:st level topics, and also as second level topic references under the main topic "Cars", like this:
Cars 4-80
Audi 4-6, 8
BMW 7, 21-24
Citroen 11, 12
Mercedes 80
Volkswagen 31-36
My question is. Is it possible to achieve this by a script, so I can copy (duplicate) all these references and put them under the topic "Cars" too (preserving the 1:st level topics too of course), without having to go to each of the pages and create new topics all over again for every single finished topic, that I intend to put under the main topic "Cars"?
Just to inform you, the above named 5 topics, are NOT only the topics I want to put under "Cars"... there are like a hundred :).
Is it possible to make a script like this? Or do I have to do all the work ALL OVER again?
Martin

Hmmm… This one copies all files which have 'flash' (could by x-shockwave-flash) string in mime type to /tmp/flash. Hope it will be helpful.
for i in ~/.opera/cache4/* ; do file -i -F '' $i | grep flash | cut -d ' ' -f 1 | xargs cp -t /tmp/flash 2>/dev/null ; done
UPDATE:
Sorry, there was a little bug, I've just changed 'video' to 'flash' ('video' coundn't match 'x-shockwave-flash').
Last edited by zergu (2008-12-25 21:16:38)

I have bought the new Iphone5. The old phone "Iphone4" has the same account as my daughters iphone 4. Now I would like to have separat accounts, is that possible? Can I make a new account and still make a copy of my iphone 4 to my new iphone 5?

I have bought the new Iphone5. The old phone "Iphone4" has the same account as my daughters iphone 4. Now I would like to have separat accounts, is that possible? Can I make a new account and still make a copy of my iphone 4 to my new iphone 5?

You need to plan. Check this tip:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

How to make the fields of the table mandatory while creating new entries..?

Hi,
I have created a new Z table which has 6 fields. All the 6 fields are KEY fields and all are of CHAR type. I have generated the table maintenance generator for the same. My requirement is all the fields should be MANDATORY while creating the entries. No field should be BLANK.
When creating the new entries in the table, even if I don't give any values to some of the fields, it is saving the entry. But, it shouldn't happen like that. If any of the field is kept blank, it should not allow the user to save the entry. Can someone tell me how to approach this. Will there be any settings while creating the table which takes care of this.
I read somewhere that this can be done using the Table EVENTS. Can someone tell me what is the code that we should write there in the Events which prevents the user from saving the blank fields. While writing the logic in the events, how to check whether the particular field is BLANK or not. Will the values be stored in any internal table kind of thing..?
My table name is ZCRF_TAB and the fields are FLD!, FLD2, FLD3, FLD4, FLD5 & FLD6. Can someone provide me sample code for my requirement. Thanks in advance.
Best regards,
Paddu.

Hi,I think u have generated Table Maintainance Generator, goto Environment->Modifications->Events
Select appropriate option by using F4,I think value 05 is appropriate for u r requirement.Enter From routine name.Dbl click on the routine.
Write the appropriate code like:
If ZTABLE-FIELD1 is initial.
Message (E000) with "Fill all the manadatory fields".
Thats it.Just look at the following docu with screenshots,by this understand how u can use Table Events:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards,
Rock.

Is it possible to make a new entry in PSA.

Similar Messages

Maybe you are looking for