Is it possible to make titles reveal one word at a time?

I would like for my titles to reveal the words one word at a time. Is this possible with iMovie 08? Any tips, tricks or suggestions?
Thanks!

> Using a case structure, is it possible to have more than 1 case
> running at a time? I'm currently using a for loop's iteration terminal
> to select which case to run but each case contains a for loop with a
> timer delay. I want them all to run simultaneously somehow..?
> Maybe possible using a different type of loop?
>
If it did this, we'd consider it a bug. By design, only one diagram of
a case is supposed to run, the one the selector specifies. If you want
them to run in parallel, put the contents into separate case statements
and use a Boolean to either run or skip the code.
For example, if you have cases run whenever their bit is set in an
integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
putting them in one case, make fo
ur cases. Put the AND logic in front
of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
the case structure. Now take i and wire it to the logic. The 0 diagram
will run on odd numbers, etc.
Greg McKaskle

Similar Messages

Is it possible to print more than one picture at a time on a single page and if so, how?

is it possible to print more than one picture at a time on a single page and if so, how?

Hi Rowegarth.
HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
You could also start with a "Design Your Own" collage print with a white theme.
This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
www.youtube.com/embed/VRoGjhXPm4I?rel=0
The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

Read one word at a time from a text file

I want to read one word at a time from a text file as it is done by "scanf &s" function in text based programme. It is not possible by " read from text" function. Suggest me function or method to solve this.

The simplest way is to use the spreadsheet string to array function with the space character as the delimiter.
Note that this won't work unless there is a space character between the words - it won't work with line feeds / carriage returns between the words but you could always split the string into lines first. You may also want to trim whitespace to remove any other non-visible characters (e.g. tab, line feeds) from around the word.
If you need something more sophisticated that splits based on whitespace (e.g. tab, new line) then you'll probably need to do something with searching the string for these characters (e.g. using a regular expression) and then splitting them yourself into an array.
Of course...if you actually want to just read one word at a time from the file rather than just split the file into words (I assumed you meant this), you will need to read the file byte by byte using the low level file IO functions, build a buffer of the bytes and check the character you've read to see if it a space.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

When I use Explored, ussually I diplay my pages in english, but Explore has a feature that you can point any word and it is translated from english to spanish (one one word at the time, not the complete page), does it is available in firefox?

When I use Explored, usually I display my pages in English, but Explore has a feature that you can point any word and it is translated from English to Spanish (one one word at the time, not the complete page), does it is available in Firefox?

I do not know the answer but if you look through the Add-ons under [https://addons.mozilla.org/en-US/firefox/search/?q=translation translate] you may find something suitable. There is of course also the well known Google translate [http://translate.google.com/#es|en|choose%20the%20language%20combinations%2C%20and%20can%20handle%20single%20words%0Awith%20some%20odd%20results service]

Is it possible to email more than one photo at a time with the iPhone? Thanks

Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

Yes. Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email. Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

Make image appear one line at a time

I have an image of a seashell that I created in Photoshop.
It's just black and white outline of an image. What I want to do is
reveal this seashell image one line at a time. I tried creating
motion paths but only part of the image is visible at any given
time, the image doesn't get revealed toward the end. Any help would
be greatly appreciated.
To give an idea of what I mean, this link here will show
that:
http://www.flashforwardconference.com/past_winners
. Once on the page click on the link "Type Drawing" next to the
words Typography:
Thank you,
ar

I'd suggest masking the image layer and then using whatever
form of animation (tweens, brute force, etc) works best to reveal
the image through the mask. If the image is organic in nature (and
assuming that you don't just want to reveal it top to bottom like a
scan) then probably hand drawing onto the mask frame-by-frame is
the best way (although this adds a lot of keyframes).

Possible to create partitioned index one partition at a time?

I have a really large partitioned table. Wanted to know if I can create the partitioned index, one partition at a time? Trying to limit the amount of resources required to throw at it. Note this is not a rebuild or reindex operation. This is a brand new index on a multi-terabyte table.
.. just throwing this out there...
Thanks for any insights..
Daryl.

Daryl E. wrote:
I have a really large partitioned table. Wanted to know if I can create the partitioned index, one partition at a time? Trying to limit the amount of resources required to throw at it. Note this is not a rebuild or reindex operation. This is a brand new index on a multi-terabyte table.
You can create the index "unusable", then alter each partition in turn to make it usable.
The side effects on optimisation and DML may vary with version of Oracle and whether the index is unique or non-unique.
Regards
Jonathan Lewis

Is it possible to airplay more than one device at a time, for example splitting the screen into quad-view?

I was told by someone that it is possible to connect up to 4 devices at a time through airplay, but I can't work it out.
Is this information incorrect? I'd like to have 4 devices displayed at a time; or at least 2.
Thanks

No you can't.
Audio can be sent to multiple speakers in some cases (eg from iTunes), but not video.

Text Animation: Making words in a sentence fade in one word at a time?

Hi everybody!
I am not very experienced with the text animations in Adobe Premiere Pro (I am running CS4).
How do I create a sentence of text where one word fades in at a time until the full sentence is present? The only way I can think of doing this is the extremely tedious and hard way, which is making each word a title and fading them in and out, and even then, making sure the spacing and placement of the words follow a straight line would be very difficult... there must be a more efficient way, right? Is there some sort of preset I have missed?
Thank you very much!

I recommend using the Keyframes in their mini-Timeline in the Effects Edit Panel. I also use the numerical settings (can be typed in, or scrubbed), to control the Effects. With the Crop Effect, you can Keyframe all four settings, Top, Bottom, Left and Right independently.
To do a "hold," just place one Keyframe at the end of a setting, and another with that same value along the Timeline to the Duration desired. There are Hold Keyframes, but I'd keep it very simple for now.
Now, this is from an earlier version of Pr, but the general tips will be the same (some additional features and a new look added) on Basic Keyframing.
The manual (do they still do those?), and the Help files will give you details, but getting the initial concept down can be a bit daunting. However, once you get your head around the concept and located the position of the various controls, you will NEVER look back, and then the Help files will make a ton mores sense. Also, once you "get it," much of Keyframing translates to AfterEffects too - just some different names and controls, but the same main concept.
Good luck,
Hunt

Is it possible to run more than one case at a time?

Using a case structure, is it possible to have more than 1 case running at a time? I'm currently using a for loop's iteration terminal to select which case to run but each case contains a for loop with a timer delay. I want them all to run simultaneously somehow..?
Maybe possible using a different type of loop?
Thanks for any help.
Rob

> Using a case structure, is it possible to have more than 1 case
> running at a time? I'm currently using a for loop's iteration terminal
> to select which case to run but each case contains a for loop with a
> timer delay. I want them all to run simultaneously somehow..?
> Maybe possible using a different type of loop?
>
If it did this, we'd consider it a bug. By design, only one diagram of
a case is supposed to run, the one the selector specifies. If you want
them to run in parallel, put the contents into separate case statements
and use a Boolean to either run or skip the code.
For example, if you have cases run whenever their bit is set in an
integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
putting them in one case, make fo
ur cases. Put the AND logic in front
of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
the case structure. Now take i and wire it to the logic. The 0 diagram
will run on odd numbers, etc.
Greg McKaskle

Make more than one pdf at a time

I am using Bi Publisher with Apex to make a pdf. I have a query that uses a template I created using the bi Piblisher / word add on.
I can create a button in Apex and run the report. Now I would like to run 5 different query/template/pdf's all at the same time and not have them
appear on the screen but just generate them and have them put at one directory location. Can I do this.
Thanks,
Doug

What has changed (a few versions of Reader ago) is that instead of each PDF opening in a part of one window, Reader opens a separate window for each. (A lot of people don't like this, but it's the way Microsoft recommended at that time).
Now, each of these PDFs-in-a-window can fill the screen, or can be smaller. You can use Window > Tile for example, or resize so you have a bit of an overlap. You should also be able to choose between the different windows right in the task bar by holding down the mouse on the Adobe Reader icon.

New Mac user: Is it possible to move more than one file at a time on a Mac?

I'm a new Mac user. Something so simple in Windows doesn't seem possible in Mac OS and AppleCare doesn't have a clue either. I have edited video files as well as the master footage video file in individual folders created by FCP. I need to transfer 6 video files, 20GB each, onto an external hard drive. This will need to run overnight because I'm using an external HD with only USB and it will take 10 hours or so. How do I transfer these 6 files all at once?
Note: The 6 files are in 6 different folders. I can't transfer the entire 6 folders because they contain other video files in them that I don't need to transfer and are larger than my 20 GB edited files. And last, I shouldn't have to drag these files individually to a folder on the desktop first, because that will take an hour and is a waste of time because I would have to sit there and wait for each to finish.

As a new Mac user, you might find the following sites helpful:
Mac 101
and since you're coming from using Windows:
Switch 101
and an independent site many people find helpful:
My First Mac
Regards.

Is it possible to delete for than one message at a time on iMessage using a mac or even iPhone?

I have a ton of messages on iMessage I want to delete, but I don't want to go one by one deleting them so is their and easier way?

As a new Mac user, you might find the following sites helpful:
Mac 101
and since you're coming from using Windows:
Switch 101
and an independent site many people find helpful:
My First Mac
Regards.

Is it possible to make titles reveal one word at a time?

Similar Messages

Maybe you are looking for