Make image appear one line at a time

I have an image of a seashell that I created in Photoshop.
It's just black and white outline of an image. What I want to do is
reveal this seashell image one line at a time. I tried creating
motion paths but only part of the image is visible at any given
time, the image doesn't get revealed toward the end. Any help would
be greatly appreciated.
To give an idea of what I mean, this link here will show
that:
http://www.flashforwardconference.com/past_winners
. Once on the page click on the link "Type Drawing" next to the
words Typography:
Thank you,
ar

I'd suggest masking the image layer and then using whatever
form of animation (tweens, brute force, etc) works best to reveal
the image through the mask. If the image is organic in nature (and
assuming that you don't just want to reveal it top to bottom like a
scan) then probably hand drawing onto the mask frame-by-frame is
the best way (although this adds a lot of keyframes).

Similar Messages

How can I display one line at a time on a PPT slide

I am using OFFICE for the Mac (2008).
In the past, I have known how to do this using PPT on a Windows PC..
But something has changed and I can no longer figure out how to get each line on a PPT slide to appear one line at a time every time I click it.
It's not that difficult, but I can't figured out where they moved the "Appear" option.
I am NOT using KEYNOTE, but PowerPoint from OFFICE for the Mac (2008)
Can someone help me.
Thanks,
Tom

Since this is a Keynote discussion forum, there may be no one here that knows. I personally hate PP and could care less about how to make one line display at a time. It is easy on Keynote and that is all I need to know. You might want to look for a PP forum and ask there.

How do I scroll more than one line at a time in Firefox 4? Scrolling with down-up keyboard arrows is much faster in IE/Chrome.

I have tried using about:config options mousewheel.withnokey.sysnumlines > false and custom set mousewheel.withnokey.numlines, but it makes a difference only when I use a mouse, which I don't use most of the time on this laptop. I use down/up keyboard errors to scroll, and the page scrolls one-line-at-a-time, very slow and lagging. Is there a way around this?
I have reinstalled Chrome as secondary browser only because of this, FF4 otherwise really kicksass. Thank you for an amazing browser and any feedback on my issue.

Well I am using those, but it is not very practical. What puzzles me is that only Firefox has this behaviour, I have tried last versions of IE, Chrome, Opera - all three scroll much faster than Firefox 4 using down/up keyboard arrows.
Thanks for the reply, I really hope to get a solution to this.

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How do I scroll one line at a time in Lion?

I want to upgrade to Lion but need the functionality of the scroll bar arrows. I have learned that the functionality of the arrows is part of the core operating system and is not being replaced. Any suggestions as to any add-on devices that would allow this function?
Thanks,
Rich

If the program/window is not a text-based one (such as a word processor), you can usually use the up and down arrow keys to scroll up or down one line at a time.
There are often mods to this behavior, but exactly what depends on the program. Test with the up and down arrow keys in conjunction with the usual modifier keys - Shift, Command, Option, etc.

Reading in one line at a time.

How can I read one line at a time?
String sData = "One large string"
StringReader reader = new StringReader(sData);
StringBuffer buf = new StringBuffer();
String line = "";
while ((line = reader.toString()) != null) {//This line does not read one line at a time. Is it possible to do the with StringReader?
StringTokenizer tok = new StringTokenizer(line, "|");
Thanks:0)

The following code snippet does what you want :-)
        String test = new String("testString \n with \n multiple lines");
        StringReader strReader = new StringReader(test);
        BufferedReader strBufRdr = new BufferedReader(strReader);
        String line = null;
        try {
            while((line=strBufRdr.readLine())!=null) {
                System.out.println(line);
        catch(IOException e) { System.out.println(e); }Have fun!

Fillable pdf's returned by clients are readable only one line at a time

We have been emailing fillable pdf questionnaires to our customers for them to complete and return via email. When some of them have come
back, they are only viewable one line at a time, we need to highlight the fillable field that the customer completed so we can view their answer.
Does anyone know why this occurs and why it would be isolated to a few cases? Thanks!
George

They were probably filled-in and saved with the Preview application on the Mac. For more information and some approaches you can take to correct, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

Utility to send text file over GPIB, one line at a time?

We are developing instrumentation that receives data and commmands over GPIB as plain text, and returns them as well. I'd like to create GPIB "batch" files and send them over the bus, one line at a time, so I can debug the instruments' behavior. I'd also like to be able to read back responses, one line at a time.
Is there such a utility? I've got our programmer working on something like this, but I'd hate to have him re-invent an existing wheel.
Thanks!

Apart from NI-SPY, I have not heard of such a utility. This may be simple to implement using proper termination. If the instrument is capable of sending line feeds or carriage return, you should be able to easily create a document. Also, using IBWRTF, you could write the ASCII file (containing the termination characters) to the bus. Depending on how you have your timeouts specified, this may be ideal.
Alternately, if you read a static amount of data, you could IBRD chunks of data. the result may need editing for broken words at the end of a line but would achieve such a result.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange

Photo printing slow one line at a time

My first time printing phots on my Officejet 4620 and it is taking 20 minutes per picture one line at a time. Very frustrated. Call the help line and was told tht how this printer works.....

Many things can affect printing photos. Wireless connectivity (if applicable), paper size, print quality, software used to print the photo, printer design optimization (photo printer vs. office printer), security software used on your computer, etc.....
That being said, this photo printing document may offer some information of benefit:
http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/printer-settin...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Listbox one line at a time

I want to add one line at a time in listbox/textbox just like InsertTextboxLine funtion in CVI. I can not find similar VI in labview. I think I can do it long way...by saving listbox to an array then append my line at the end of the array and send updated array to listbox..these are lot of steps to add one line to listbox/textbox...
Any help would be appreciated.
Thanks.
CVI 2010
LabVIEW 2011 SP1
Vision Builder AI 2011 SP1

Actually, the way to append an item to a list box is to create an Item Names property node for the list box. Then you can use Insert Into Array, and write to another property node for Item Names.
Message Edited by tbob on 10-03-2005 02:31 PM
- tbob
Inventor of the WORM Global
Attachments:
ListBox.PNG ‏3 KB

How can I make a custom one-line-per-test rpt using TestStand?

I have written a 1-line-per-test report in another LabView application. How can I do the same within TestStand 4.0? I would like to display the usual information: Description, Measurement Reading & Units, Pass/Fail, Lower Limit, and Upper Limit all in a concise, one line rpt. Isn't most of this data available within TestStand?

I would have figured this to be a pretty common use case, so I was wondering if anyone has made/edited a report sequence that does this?
For example, the default report text looks something like:
UUT Report
Serial Number:                MACADDRGoesHere
Date:                         Monday, September 22, 2008
Time:                         9:48:05 PM
Operator:                     administrator
UUT Result:                   Passed
Begin Sequence: MainSequence
(C:\Projects\Corventis\1-08-01641-Corventis-Gen1 PCBA Test System\Engineering\3 - Develop\Sandbox\Report Generation Demo\Report Generation Demo_Main.seq)
V_CPU_2V5 (Device Off):        Passed
   Measurement:              0.3000
   Units:                    V
   Limits:
   Low:                   0.1000
   High:                  0.5000
   Comparison Type:          GELE (>= <=)
   Module Time:              0.0014
Memory DataBus Test POST:      Passed
   Module Time:              0.0012
V_BATT:                        Passed
   Measurement:              3.1200
   Limits:
   Low:                   3.0000
   High:                  3.2000
   Comparison Type:          GELE (>= <=)
   Module Time:              0.0009
End Sequence: MainSequence
End UUT Report
whereas I'd love something like:
UUT Report
Serial Number: MACADDRGoesHere
Date: Monday, September 22, 2008
Time: 9:48:05 PM
Operator: administrator
Execution Time: 0.2188 seconds
Begin Sequence: MainSequence
(C:\Projects\Corventis\1-08-01641-Corventis-Gen1 PCBA Test System\Engineering\3 - Develop\Sandbox\Report Generation Demo\Report Generation Demo_Main.seq)
Test Name Result Measurement Units Limit Low Limit High Comparison Type Module Time
V_CPU_2V5 (Device Off) Passed 0.3000   V   0.1000   GELE (>= <=)   0.0014
Memory DataBus Test POST   Passed   N/A N/A N/A N/A N/A 0.0012
V_BATT      Passed   3.1200   3.0000   3.2000   GELE (>= <=)   0.0009
End Sequence: MainSequence
End UUT Report
Message Edited by crelf on 09-22-2008 10:19 PM
Message Edited by crelf on 09-22-2008 10:19 PM
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

My mouse scrolls shows each line moving up instead of moving one line at a time annoying

Since downloading firefox 3.6 when I scroll down a page it shows each line moving up instead of just moving one line up its very annoying

It could be that there is not enough memory in the printer or the print server to hold the entire document while printing. The printer gets Postscript files, which are larger than the original document. Also, if you are doing multiple copies, if you collate the pages, that takes more memory than printing each page multiple times.

Making a list of text appear one item at a time - help

I want to create a list of, say, 4 bulleted text items that will appear one at a time from top to bottom, either by being revealed from above, or fading in.
I've been using the reveal method. I put my bullet points in one clip, put a four-pointe garbage matte over it, and use key frames to move the matte down at the appropriate times to reveal the type behind it.
The fade-in method is even worse. I have to create a separate clip for each of the four bullet points, stagger them appropriately, and then do a fade in on each one.
It has GOT to be easier than this, right?
Anybody have any ideas or suggestions on better ways to do this?

That's the fade-in method I describe above.
I'd like to be able to do this in one track, and I like the reveal from above method better than the fade in. The problem with that, however, is I basically have to keep plugging in numbers until the matte has moved where I want it. If there was a way to just grab the matte and drag it where I want, that would solve everything.
Try using 4 TEXT generators, one for each bullet
item. Place them on top of each other, on 4 video
tracks, but slightly offset so each appears after the
other on the timeline. Add transistions so they fade
in and out, etc.

Is it possible to make titles reveal one word at a time?

I would like for my titles to reveal the words one word at a time. Is this possible with iMovie 08? Any tips, tricks or suggestions?
Thanks!

> Using a case structure, is it possible to have more than 1 case
> running at a time? I'm currently using a for loop's iteration terminal
> to select which case to run but each case contains a for loop with a
> timer delay. I want them all to run simultaneously somehow..?
> Maybe possible using a different type of loop?
>
If it did this, we'd consider it a bug. By design, only one diagram of
a case is supposed to run, the one the selector specifies. If you want
them to run in parallel, put the contents into separate case statements
and use a Boolean to either run or skip the code.
For example, if you have cases run whenever their bit is set in an
integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
putting them in one case, make fo
ur cases. Put the AND logic in front
of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
the case structure. Now take i and wire it to the logic. The 0 diagram
will run on odd numbers, etc.
Greg McKaskle

Why does pressing the down arrow button result in going to the bottom of the page and being nunable to go up or down one line at a time?

i dont know what to say in way of clarification. when looking at a page i am forced to use the "slide" on the margin which is very sensitive on very long documents instead of the down arrow to move one line. pressing the arrow results in going to the bottom and you cant return using the arrow.

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Make image appear one line at a time

Similar Messages

Maybe you are looking for