Is it possible to mirror xy graphs between VIs?

Hi,
I've got an application where the main interface is a tab control. Each of the 6 tab pages has a subpanel. In each subpanel, there is a subVI that displays a number of controls and an XY graph. The graphs vary a bit between the subVIs, with each graph having different cursors, maybe different axis labels, etc.
I've recently received a request from a user that in addition to the tabs the system has now, they want an additional page on the tab that will show them the graphs from all 6 subVIs simultaneously.
Is there some way I can "mirror" an xy graph control in a subVI and display the mirror in another? I can get references to the original graph, and I only need to update the data once a second or so. This is for viewing only - the user will not be able to interact with the mirrored graph (no cursor movement, no changing the axis, etc.).
Thanks,
JasonP

Hi Jason,
You have some options.
You could use a reference and get the value of the graph.
This would require polling to get new values and property nodes can be slow.
Or you could use a Queue or a User Event to get the data to the main vi as shown in the attached examples.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
Graph Mirror Q.vi ‏18 KB
Graph Mirror UE.vi ‏17 KB

Similar Messages

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

Is it possible to mirror from a G5 to a Cinema display?

There was a recent post here that addresses this, but my (likely very stupid) question is--isn't it possible to use a mini vga to vga and a dvi to vga adapter to connect your iMac to a Cinema display? Or does the dvi to vga adapter only go one way?
I'm assuming from the thread mentioned above that this is essentially impossible without a lot of finagling. The website for converters linked shows a VGA to DVI-A converter, but I'm assuming DVI-A is different from DVI?
I was originally told by an Apple store salesperson--who, in retrospect, clearly had no clue what he was talking about--that the Cinema display would work with my iMac, no problem.
Unfortunately... I bought a second-hand one off ebay, so now I'm stuck with a monitor that I can't even check the display on (which will probably make reselling it on ebay difficult.) So I'm trying to figure out once and for all if this is impossible and I should just give up, cut my losses, and get a VGA display instead.
I went into the Apple store today and the ditzy girl I spoke with informed me that "the people in the back" said that it wasn't at all possible to mirror my G5 onto a Cinema display. She clearly didn't know anything beyond what size ipods they carry (if even that), so I'm hoping someone a little more knowledgeable (or maybe even someone who's tried it?) can clarify for me, because the extent of my hardware-related expertise is 'how to install RAM.'
Thanks in advance for any help!
(And lesson learned: never count on Apple store salespeople for any information--ever.)

Thanks for your response Donna! Further research has found me some more clear-cut answers.
I've read a few success stories of people using the VGAtor to convert their iMac's output from VGA to DVI but I'm apprehensive since it costs $300, and there's no mention of a return policy on their website that I can find. I tried emailing them about compatibility/return policy so I guess we'll see. (The success stories I speak of are in the forum for Screen Spanning Doctor, but the forum's been dead for almost a year now.)
Gefen's VGA to DVI Scaler seems to be better supported, but that's up to $330.
I don't want to use a TV, because I'm a graphic designer so I need higher resolution than any TV in my price range can offer.
But I think I will probably be going with a VGA display though just to save myself the headache. Even if I ended up losing $300 in reselling this display to get one, it would be no different than spending $300 just for a converter--I'm not convinced that the Cinema displays are worth it, when I could get something similar for under $400. If I had wanted to spend $1000 on this upgrade I would've just sold my G5 for a new 24" one.
I agree it would've been much smarter if they had just made their own DVI adapter, since they DO exist (and enabled screen spanning in the G5, at that.) Or, even more radical... just added a VGA input to their displays--there are plenty of monitors out there with both, so obviously it's possible. If they had actually made the displays compatible with like 90% of their pre-existing systems they could have sold exponentially more. It would have been far more profitable--I love Apple computers, but I'm sure I'm not the only one choosing to buy another brand of monitor rather than fork out thousands to upgrade the display of a perfectly good computer.
Well, forgive my rambling. In case someone else is curious, I'll wait to see if I get a response to my email, then update and close this.
Unfortunately now I've gotta lug it on the metro to get it tested, since taking it to the Apple store seems to be my only option right now.

Is it possible to mirror the display on the Macbook pro which is two years old to my iMac which is four years old? Macbook pro is running OS X Lion 10.7.5 and the iMac is running OS X 10.6.8 (10K549). Neither of them have Thunderbolt ports.

Is it possible to mirror the display on the Macbook pro which is two years old to my iMac which is four years old? Macbook pro is running OS X Lion 10.7.5 and the iMac is running OS X 10.6.8 (10K549). Neither of them have Thunderbolt ports.

OK, well I would go with what Apple says in writing but if you want to take a trip to visit the Genius Bar that won't hurt.
Good luck, I'm 99% certain you will find I was correct but please let us know.
BTW when posting please click the Reply link in the post you are replying to, otherwise we can't tell who y our comunication is directed to.

Is it possible to add a Graph in the Teststand Labview OI

Is it possible to add a graph to the Labview OI so that data can be passed up via the sequence context? Would posting a UI Message be the right way to trigger the graph to update? I'm not sure how to do this since the graph is not a UI control.
Has anyone done this or is better to just pop-up a graph in a sequence step?

paulmw,
I have not tried this, but one way you could do this is by running the VI with the same version of the LabVIEW run-time engine that the OI was build with. The LV OI will load the run-time engine initially. When TestStand runs the test VI, it will try to first load the run-time engine specified in the adapter configuration. If the specified version is the same as the version used by the LV OI, it will used the one in memory. Since TestStand and the OI share the same run-time engine, creating a queue in the OI and populating with the VI run by TestStand will theorically work. Like I said, I have not tried this, but I am assuming it will work. The key is to make sure the LV version used to create the LV OI executable and the VI are the same.
Jose

Is it possible to pass the idoc between the same client

Is it possible to transfer the idoc between the same system. I do not have two clients . I have only one client access. Is it possible to pass the idoc between the same client.

Hello Preethy,
This would not be possible as when you have to create the logical systems, you cannot create two entries for the same client.
And while defining the partner profiles as well.
IDocs are basically for two systems or two clients.
YOu may not require IDoc in one system itself.

Hello, i have a question. I've got one .mov video and one .mp4, both 3 minutes long. Now I want to burn them on one single dvd, and a menu (if possible) so i can choose between them. Is this possible?

Hello, I have a question.
I've got one .mov video and one .mp4, both 3 minutes long. Now I want to burn both of them on one single dvd, with a menu (if possible) so i can choose between them.
How can I do this?

You could use iMovie if you own it. Look here for an example...

Is it possible to share a sequence between computers and different projects?

Is it possible to share a sequence between computers and different projects without copying the sequence, closing the project, opening the new project and pasting in the sequence. This workflow is to slow when it takes 40 minutes for Premierer Pro CC to load a 4tb project. Just this simple thing would take 80 minutes.
Message was edited by: Kevin Monahan
Reason: Shorter, more searchable title.

Okey, I found out how to import the seaquens, it is actually possible to make that choice after you click to import seaquence. But the problem is i do not want to import the media again. I already have that media in the other projekt. And once importingit it is offline and when I want to delete it it want to remove things from the timeline defeting the purpus. Is there a way to get aroun the fact that the program wants to import the media with the timeline.
The thing is that I want to editing on two computer. On the second computer I will edit just a few scenes that I will later bring back in to the big project that has all the material. I have been copying the material for a few scenes to another external drive and also copied the big projekt and then opened this on my laptop. Then I made all the missing material offline while the projekt found the existing material. I editid the material. Copied the projekt and opened it on my stationary editing computer and copied the timeline with the scene that I had been working on while the media was loading, then shut down the project and opend the old big projekt and pasted the timeline in to the project.
Is there an easier way?
It would be nice to be able to import the timeline (without importing the media) when I have the program opened. Since it takes 40 minutes for my media to load.

Is it possible to mirror my macbook display onto a powerbook?

Hi. I'm wondering if it were possible to mirror my macbook display onto a powerbook such that videos watched on both screens would be in sync? What are the cables I might require for such a set-up or is there any software I might need to obtain? Thanks.

OnLocation from Adobe
HD Monitor
ScopeBox
VeeScope
among others

TO get graph between month and value

Hi Gurus,
Please help me , i had to make Graph between values and month and for every year lines should be different .
its basically a stock vs time graph thorough ABAP coding.
i had itab which have value for every month , but how to plot it i not able to get it.
please do help me.

Perhaps have a look at the programs starting GRBUS* (and other GR* entries) as they demo some of your graphical options.

Is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?

As per the title is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?
We have a case where very rarely an item might have been miscategorised so the brand is manually changed. We want this dimension to be rigid to speed up ProcessUpdate.
We do a ProcessFull each night, so it will get corrected then, but during the hourly updates we would just like to ignore this error if possible?

Hello,
The rigid relationship should be defined when the members will not change over time. Here are some threads regarding rigid relationship for your reference, please see:
Processing OLAP Cube: http://social.technet.microsoft.com/Forums/sqlserver/en-US/17a55593-9543-404e-a579-0a011965585d/processing-olap-cube?forum=sqlanalysisservices
Flexible and rigid relationship: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d8f5443-065d-4485-9385-6f0b5fa417da/flexible-and-rigid-relationship?forum=sqlanalysisservices
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Do you know when it will be possible to mirror a MacBook Air on apple tv2

Do you know when it will be possible to mirror a MacBook Air on apple tv2

Only Apple knows when or if this will ever be supported. They aren't talking..
Regards,
Captfred

Possible to replicate cn=schema between masters that don't share a LDBM?

I have multiple directory servers in my environment. One set has suffix A, another set has suffix B and a 3rd set has suffix C. I would like to replicate just the cn=schema between all of the masters for consistency reasons. Is it possible to replicate cn=schema between masters that don't share or replicate a user created database with each other?
These servers are DSEE 6.3.1 and are all controlled by the same DSCC.
Thank you,
Matt

I already know how to manually copy the 99user.ldif file to all of the servers. I am trying to get away from having to manually copy schema changes between servers every time a new attribute or objectclass is added to one set of servers.
Is there a way to replicate the cn=schema DIT alone?

Is it possible to mirror the screen on my iPhone 5s via apple tv onto the screen of my macbook pro

Is it possible to mirror what is playing on the screen of my iPhone 5s via Apple TV to the screen of my Macbook Pro?

if it is running OS X Yosemite
Step 1
Connect your iPhone directly to your Mac using your Lightning to USB cable.
Step 2
Open QuickTime Player and choose File > New Movie Recording
Step 3
Select your iPhone as the Camera using the dropdown menu to the right of the record button
Now your phone should be mirrored onto your Mac.
You do not need to use the Apple TV

Is it possible to mirror the iPhone on a TV screen, a projector, etc.

Is it possible to mirror iPhone iOS on a TV using VGA adapt.-cables?

http://store.apple.com/us/product/MC552ZM/B/apple-vga-adapter

Is it possible to mirror xy graphs between VIs?

Similar Messages

Maybe you are looking for