Is it possible to prioritize the items to synch?

I have an 80GB video classic and far greater than 80GB of material that I want to synch. I love podcasts and have selected "3 most recent unplayed" as my selection criteria for podcasts. In addition, I have only selected some of my music playlists.
I would like to be able to priortize what is synched and avoid the warning diaglogue boxes that tell me that I don't have enough room. I don't want to upgrade to the 160GB, it's too fat and heavy and my iPod is quite new.
If I had other games and audiobooks, these should be included in the prioritization as well. Is this feature already available and I just don't know where it is? Is anyone else interested in a feature like this?

You have done most of what you can.
As you are already syncing selected playlists the next step is making sure playlists are small enough.
For me, I still have to manage some things manually. Video files I check/uncheck to control transfer to iPod. Music files are limited to 5 playlists, contents of which are controlled by smart playlist rules. Podcasts are downlaod all, and sync all, I delete after playing.

Similar Messages

Is it possible to delete the item in sales order .

Hi
I have 5 items in the sales order ,
The delivery and billing is over .
But the one line item still shows the open status .
Is it possible to delete that item in the order ?
Thanks,
Phani

Hi Phani,
Is the Line Item that you want to Delete is not delivered or not Invoiced Yet?
If you haven't done any subsequent processing with that line item, yes you can delete that line item from the sales order. result is you will not see that Line Item number again in the sales order. Even if you look at the sales order line item table, you cannot see that LI number.
Eg:
If you have 5 line items, 10, 20, 30, 40 & 50, you have NOT DONE delivery billing to any line item (Say 30), you can delete that line item without any issue by selecting DELETE ITEM option in the sales order /Item Overview tab.
Prime Requirement for Deletion: No Delivery billing should be done
If you have partially delivered and / or billed, in that case you cannot use that option.
Then you have another option to close that line.
Go to Line item & select a "Rejection Reason" there. Though you have partially delivered & invoiced, now your line item is closed. It won't appear in you MRP also.
Eg: If you have 100 quantity in the line item, and you have delivered 80. and customer don't want any deliveries again, In that case you can do this.
Best thing is create a new Rejection Reason as "Complete".
Then assign that "Complete" rejection reason, for this type of scenarios.
Best regards,
Anupa

Updating the Item category in a Free of Charge order

Hi all,
I am currently working in a requirment on Free of Charge orders.
Existing scenrio is : In Free of Charge orders, if there is a BOM material is associated in the sub item, then the particular product's item category is not editable, so we can't alter it manually. SAP Note : 796926 says there are restrictions for usage of free of charge transaction types when the sub item involved is BOM.
Requirement: To make this item category editable in this scenario.
So we are currently looking for an option to make an enhancement to SAP standard program for this. I tried to debug standard modules from the point where we open an order. But not able to find any significant place which deals with disabling this item category.
Any suggestions on the SAP CRM program which deals with this will be very helpful. Thanks in advance.

hi
Once the BOM is created it is not possible to change the item category,either you have to delete the material and re-enter the material with different item category
regards
thyagarajan

Is it possible to make an item not have any discount at all?

This is the situation - A customer wants to turn off the ability for all users to give any discount for certain items. Rest of the items may have discounts based upon BP discount or any other price hierarchy discount. Users can also override this discount during order creation. But discount should be possible only if the item master data says the item is discountable.
Is this possible please? Is there such a field on Item master data to turn off discounts altogether? If not any other suggestions to achieve the above.
Thanks.

Hi Bala, you are right, the user must be able to give discounts to items that can be discounted. Most often the discounts will come from the BP price list and associated special and hierarchic pricing.
As Rakesh suggested, I shall run it by our client if they would want to limit discount ability across the board for their users through General authorizations and perhaps allow for only some users who could override manual discounts to certain limits. Again it pertain to the ability to override manual discounts on top of BP discounts through list for all items for some users only.
Thanks again Bala and Rakesh.
Edited by: Syed Aleem on Jan 11, 2011 1:32 AM

Is there a way to add a number to the items in a playlist?

Is it possible to number the items in a playlist? For example, I have books in order and I want to add numbers so I know which one to listen to next.

There is some variation in the way that different models of iPods handle listing of audiobooks - specifically those broken into multiple parts (files). I have one old Nano (2nd gen) and a current model (7th gen) - the latter (correctly) lists complete audio books in the Audiobooks menu, each book then listed as one or more parts (typically further subdivided into chapters). The older one just has a list of parts (ordered by Name or, if set, Sort Name).
The method that I use to get as consistent listings is possible is to set both Sort Album and Sort Name metadata elements as shown in this example:
Notes:
This is an anomaly since the actual book title starts with 'A' which iTunes will automatically strip and set the result as the sort name. Explicitly setting the Sort Name to the full title overrides this.
This is a three-part audiobook (i.e., three files)
This is how I handle series - so these three files (one audiobook) are the 3rd volume of the "Sherlock Holmes" series. Using 01, 02, 03 rather than 1, 2, 3 allows for series that run to more than 10 titles.
Since the Name values start with "The" iTunes strips this off to automatically create a Sort Name.
Another example of books in a series, where each audiobook is made up of two or more parts
This is the standard I use for (almost) all multi-part books - set the Name value to <title> - Part <part no.> ... note that as in example (4) iTunes automatically strips "The" to generate the Sort Name
This is an exemption to the rule illustrated in example (6) - its a 12 novel sequence, each with an individual title (Name field), published as four audiobooks each split into three parts. The Sort Album values ensure that the audiobooks themselves are ordered correctly; the Sort Name values put the individual novels in the right order.
I'll freely admit that this isn't simple, and that it took me several rounds of trial-and-error to finalize a scheme that works for me. Obviously you could achieve very similar results by prefixing Name and Album values with serial numbers - I prefer not to do this for largely cosmetic reasons - I like titles to be "proper" titles, not numbered items. Turingtest2 has a script on his site that takes a slightly different approach (though fully automated) - I tried this but found some issues with portability across the two iPods that I routinely use for audiobook listening.

VISA Debt Card Issued in Mexico and pick the items up at store.

I live in Mexico and plan to travel to Chula Vista CA., I want to buy some items on November 27th, but they aren't available to pick up at Store by now. I plan to travel to USA between December the 5th and 7th. Is there any possibility to buy the items and to pick them up at store 188 Chula Vista on that dates? Another question. Do you accept payments with my international Visa Debt Card? I don't have a Credit Card. Or maybe I can pay when I pick up the items at store with that Debt Card. Could you please send me your comments? I will appreciate them and also your help. Thank you very much.

Actually that is the store I work at and we certainly get quite a bit of international traffic. I can safely say we do accept valid Visa Credit cards even if they are issued in another country. Though as a warning I would reccomend calling the issuing bank before your trip to allow the card to be used.
Sometimes bank cards from Mexico are flagged as susspicious seing as cards are typically not used in other countries, calling the bank first should be able to clear it for such use. The currency is automatically converted.
If you are going pick up an item in store you must have a valid ID and passports are accepted, also when placing the order you must use a special address as the billing address as the forms online do not allow Mexican addresses to be used. The address to use is as follows.
10780 Kempwood Dr.
Houston, TX 77043
Feel free to come in for anything we can do for you.
I work for Best Buy as a mobile sales associate but all my comments, posts and opinions are my own and do not in anyway reflect Best Buy.

Possible to conditionally change item type?

Hi there,
I've been trying to find a possibility to change the item type (text item) into another (disabled text-item) based on the value of that field.
Thus far I haven't found it. Is there anybody who knows if this is possible and how I can do it?
Thanks!
Jacob
null

Hello Jacob,
>> I've been trying to find a possibility to change the item type (text item) into another (disabled text-item) based on the value of that field.
You should check the “Read Only” section of the item. It allows you to define a condition to set the item as “readOnly”, and in version 3.1 also allows you to define a proper (different) style for it.
Hope this helps,
Arie.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Is it possible to add a column to the Item matrix in the ItemLookup form (C

Hi,
Is it possible to add a column to the Item matrix in the ItemLookup form (CFL or Find Lookup).
I need to display a value in the newly added column if the itemgroup in that row matches a certain value , how can I achieve this.
Thanks

Hi,
You may check this: Can we add CFL to the system/form defined textbox?
Please close your previous open thread.
Thanks,
Gordon

Is it possible to retrieve deleted items from the Pages App please?

IIs it possible to retrieve deleted items from the Pages App? Thanks

From within the Pages app, no. If you have an iTunes or iCloud backup that would have contained the file, and you are backing up Pages, it could be received via a restore using that backup (this would wipe out any newer data however).

IPhoto update can't be installed on my MAC ref. "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

Recent upgrade to OS X Yosemite on my MAC and iPhoto update can not now be installed msg reads, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

That error message can be misleading. It means, that iPhoto on your Mac is not associated with your Apple ID.
Either you did not set up your Mac using the same Apple ID - did someone help with your setup and use a different ID? Perhaps a family member? Or did you let someone borrow your installer disks?
Or did you not yet "Accept" iPhoto and other iLife apps to your Apple ID? Check the "Purchased" tab of the App Store, if any applications are waiting to be accepted. If you see "Accept" buttons, press them.
You may be unable to "Accept" now, if you missed the update to iphoto 9.5.1 on Mavericks. You could try to buy iPhoto, however. If you are lucky, it may show for free.
Backup your iPhoto library, if you do not have a current backup.
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put it back,if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

Is it possible to change the VBAP-ADRNR item address field value?

Hi,
Is it possible to update the VBAP-ADRNR item record field value?
I am trying to update this field value from BAPI_SALESORDER_CHANGE but it is not changing the value.
I am only able to change the corresponding address for that address number.
But I need to change the address number( I want to replace with header address number) itself.
If any ideas please let me know.
Thanks,
Mohan.

ajitabap wrote:
Hi
>
> Schedule Lines related Data USING BAPISDORDER_GETDETAILEDLIST Then Pass them to BAPI_SALESORDER_CHANGE Then It work and update the field.
>
> Regards
> AJIT
eh????
What's the relevance of schedule lines and ADRNR?
@OP: Don't. There is a reason why SAP gives out a new ADRNR. And manually changing the value of a primary/foreign key is never a good thing to do.

How to make the GL account discription possible in FAGLL03 line item display?

Dear Experts,
    Could you tell me how to make the GL account discription possible in FAGLL03 line item display?
    I checked the layout, there is no account discription.
    How should I do?
Thanks!
Xinling Zhang

Hi
One you execute FAGLL03, go to Settings>Layout>Current Header Rows
You can add some predefine characteristics here.
I am not sure why the hyperlink is not working at your end. But you can search the SDN for special fields in FAGLL03 and you can get lot of posts for this document.
Regards
Sanil Bhandari

Is it possible to SORT the Login Items on

Is it possible to SORT the Login Items on
Apple - System Preferences - System - Accounts - Login Items?
Useful to load one of them before or after the others.
Thanks?

I don't think you can sort them like that but you can achieve this by using apple script.
for example if you want to launch Mail first and Safari second, paste the following into script editor and save it as an application.
tell application "Mail" to launch
tell application Safari to launch
You can also put a delay between the two:
tell application "Mail" to launch
delay 3
tell application Safari to launch
this will put a delay of 3 seconds between launches. Now remove Safari and Mail from login items and put the app you made using apple script there instead.

Is it possible to prioritize the items to synch?

Similar Messages

Maybe you are looking for