Is it possible to quickly straighten lines or remove multiple points of a line

Hi, sorry not too sure how to word the question.
I am studying for an MSc in Geology and am doing seismic mapping. To tidy up my maps I exported them to ArcGIS so I could join various ones together and also contour the maps. Then I exported the GIS maps into illustrator so I could attempt to smooth some of the contours as they are extremely jaggedy due to the nature of the data.
Is there a way to quickly smooth lines or mass delete points that make up the lines?
I am asking because I have 30+ maps and each map has maybe 50lines with each line being made up of currently about 1000 points each...
If I can't find a solution I will probably end up drawing over the contours with the pen tool and just smoothing it that way, as it should be a lot faster then deleting so many points.
Any help greatly appreciated.
I am currently using Illustrator CS5 and have access to CS4.
Thanks

And if you get good using the smooth tool, it is on the pencil flyout, you might be able to use it to refine the contours as well.
it they are actually angled segments then you can select the paths and use the make
Smooth tool can be set to your specification but you have ti experiment wih it to see how it works.
Give it a little more work and you get this

Similar Messages

Line Chart Problem, multiple point in X axis

I need to create a line chart , with many data points between two points in the X-Axis.
For example,
for month january my reading is 4,3,5,2,8
for month feb my reading is 1,5,3,5,2
I need only two points in X axis, which are january and feb and all the reading should come in gaph.
I am attaching a picture of the graph i required. Can any one help me how should i fill the arraycollection or XML in order to get the graph.

Here is a script which will illustrate how to conditionally display the X-axis label on a line chart:
DROP TABLE tmp_test_data;
CREATE TABLE tmp_test_data
(date_stamp DATE,
value      NUMBER);
BEGIN
dbms_random.seed(1234535678);
FOR i IN 1 .. 233 LOOP
    -- get a random integer between 1 and 100
    INSERT INTO tmp_test_data
     (date_stamp, value)
    VALUES (TRUNC(SYSDATE)-i, dbms_random.VALUE(1,100));
END LOOP;
END;
SELECT NULL link, CASE WHEN MOD(day,7) = 0 THEN day ELSE NULL END label, value
FROM (SELECT date_stamp, value, ROW_NUMBER() OVER (ORDER BY date_stamp) day
         FROM tmp_test_data a
         WHERE date_stamp >= TRUNC(SYSDATE)-90
         ORDER BY date_stamp) b
;There may be a better way to do this. I know this will work.
Mike

BTE 1650 LINE ITEM DISPLAY: Add to data per line - possible solution

Hello,
I would like to populate field payment order (Pymt.order) in custom transaction FBL5N
I have read that it should be doable using BTE 1650 LINE ITEM DISPLAY: Add to data per line but I am not sure if 1650 is correct one and if its proper solution for this purpose.
Could you please advice?
Thank you in advance!
Michal

i have the same problem , i used BTE and the fields appear but without data . which table or code i will use to in FM to display data in transaction.
thanks all for help

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Formating Line thickness for lines in graphs with more than 6 lines.

I have a line graph with more than 6 lines on it and I'm trying to make them all 1px.
I can specify a line thickness for the first 6 lines but after that, the lines go back to the default thickness.
Is it possible to change the default line thickness for a graph or format the line thickness for the 7th line and more?

Good news! I found out how to format more than 6 lines of data and it's really simple to do!
In the bottom left hand corner of the Format Chart Data, next to the Clear All button, is a button marked ADD.
If you click this button, another row is added allowing you to format the 7th line of data.
Click again and you get a row for the 8th line and keep clicking to add more lines.
I'm making a note of it here in case it is useful to someone out there who searches on this problem in the future.
Edited by: user2052587 on Jan 6, 2010 2:45 PM

Upgrading EDGe line and transferring phone to a different line

Hey guys, I currently have one line on the EDGE program that is eligible for an edge upgrade - however, when I upgraded that line to the edge program back in Feb 2014, I did it for use on a different line on my account (basically used another line's upgrade) Now I'm wanting to use the edge upgrade again for the same 2nd line I previously used it for, and am wondering how to go about doing that. I specifically wanted to do the purchase online, which is what I'm leary about - whether or not I could use the upgrade for a different line if purchased online. I really don't have the time to go to a Verizon retailer, considering all the Verizon stores in my area consistently have wait times of atleast an hour (when I last upgraded in-store, I was there a total of 3 1/2 hours). Hoping someone can walk me through how I would go about this transaction.
Thank you guys!

vereyezuhn,
Thank you so much for reaching out to us! I want to make sure that we get all of your concerns addressed for you. Let's make this as easy as possible. In order to go over the account specifics, I would like to speak with you in a Direct Message. I have sent you a message, please respond back to that message for me. I'm looking forward to working with you.
KevinR_VZW
Follow us on Twitter @VZWSupport

No possible entries exist for this field for Shipping Point

Hi gurus,
I require the Shipping Point to be automatically determined in the Sales Order. Except this is not happening, I then attempt to manually select a Shipping Point in the line item of the Sales Order and receive the following error (in green)
"No possible entries exist for this field"
The Material Master has the Loading Group assigned.
The Sales Order Type has the Shipping Condition assigned (so does the Customer)
The Plant is assigned to the Customers (no CMIR created)
The combination of the three are entered in the 'Shipping Points Determination" table in SPRO with a Proposed Shipping Point AND a Manual Shipping Point.
Except I can not choose either of them as a Shipping Point in a Sales Order.
Anyone have the knowledge to understand why I can not select a Shipping Point?
Thanks

Shipping Point Determination
Shipping points are independent organizational units that are linked to a plant and represent the point of departure or receipt of materials.
Check if shipping point is defined and assigned to plant or not by going to:
IMGEnterprise structureMaintain structureAssignmentLogistics executionAssign shipping point to plant
IMGSDShippingBasic shipping fncsShipping point determination.
The shipping point is determined based on the shipping conditions, which are either entered manually in the sales order or are copied from the customer master record (shipping screen 01=as soon as possible, 02=standard, 03=collective processing). The shipping point is also determined by the loading group (0001=crane, 0002=forklift, 0003=manual), which is copied from the material master record, and the delivering plant of the line item in the sales order.
Regards,
Rajesh Banka

Sales order with line items having multiple values in multiple currency

Please suggest solution for creating sales order having line items with multiple values in multiple currencies.
e.g. Line Item A Qty/1 No, value 100INR100$100EUR. Customer wants all three values to display at sales order line item level and create billing in 3 currencies.

Hi,
As far as my understanding it may be possible round the solution,
For 1 company code we can able to maintain 3 currancies,
1 currancy is hard currance & other two are dual currancies.
Create sales order with 3 line items having 3 diffrant currancies
Spilt invoice on the basis of currancy
Last pass to this invoices to accounting.
Whole process is
Sales order >>> Delivery >>> Invoice 1, Invoice 2, Invoice 3(Split invoice on basis of Currancy).
Consult with FI Team they will tell you about dual currancy & hard currancy
Kapil

[svn:fx-trunk] 9938: Quick convenience logic to remove a DL from a previous parent if it' s ever reparented with addLayer.

Revision: 9938
Author:   [email protected]
Date:     2009-09-02 14:07:27 -0700 (Wed, 02 Sep 2009)
Log Message:
Quick convenience logic to remove a DL from a previous parent if it's ever reparented with addLayer.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Steve S.
Tests run: Checkin (before the previous build breakage)
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/DesignLayer.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

Obtain offset of a point from a line segment

Hi,
Given a line segment and a point perpendicular to the line segment(both in LRS). Is it possible to retrieve the offset of the point from the line segment. i've serached the LRS documentation and have not found a built in function to do so.

If I understand you correctly, the following thread should answer that: If not, please explain further.
lrs offset
Bryan

Why do I get order lines transferred to COPA but no contract lines?

Hello Experts,
Regarding COPA I do get order lines transferred to COPA but no contract lines. I thought that with transaction "activate incoming sales orders" in customizing, both types of lines would be transferred to COPA. Is there another setting which should be made for contract lines in particular?
Looking dforward to your reply,
Best regards,
Stephan

Hi Ram,
I do get contract lines to COPA now but with the billing date from the contract as posting date in ke24. Is it possible to the posting date similar to the contract start date?
Or isn't it because it should be equal to FI posting dates?
I posted another question to you on this forum in which I had an issue with contract lines that flow to COPA but also to the billing due list. Here I wanted to prevent the flow to the billing due list. Or is this also not possible?
Would appreciate your advice very much.
Best regards,
Stephan

How to find a second point on a line given a point and distance

Hi All,
My requirement is: Given a point on a line and distance, I have to find the second point. All geometries are in LRS.
I tried using SDO_LRS.LOCATE_PT, it is returning the second point from the start of the segment but I want to locate the point from the given start point. Kindly suggest in how to solve this.
SQL Used:
SELECT SDO_LRS.LOCATE_PT(a.shape, m.diminfo, 9, 0)
FROM lrs_access_fiber a, user_sdo_geom_metadata m
WHERE m.table_name = 'LRS_ACCESS_FIBER' AND m.column_name = 'SHAPE' AND a.unique_id = 1996;
Regards
Venkat

Hi Luc,
Thanks for the information. I have implemented this in a slightly different way like:
1. Firstly, found the distance (Distance_a of the point selected from the start point of the segment using:
SELECT SDO_LRS.GET_MEASURE(SDO_LRS.PROJECT_PT(a.shape, m.diminfo,MDSYS.SDO_GEOMETRY(2301, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), MDSYS.SDO_ORDINATE_ARRAY(xa,ya, NULL)) ), m.diminfo ) into Distance_a FROM LRS_ACCESS_FIBER a, user_sdo_geom_metadata m WHERE m.table_name = 'LRS_ACCESS_FIBER' AND m.column_name = 'SHAPE' AND a.unique_id = Input_Fiber_Id;
2. Then added the given distance (b) to this computed distance (Distance_a ) to get the distance of the second point (Distance_b).
Distance_b := abs (Distance_a + b);
3. Then used SDO_LRS.LOCATE_PT with offset=0 and distance=Distance_b to get the second point.
select SDO_LRS.LOCATE_PT(a.shape, distance_pt, 0) into point_geometry from LRS_ACCESS_FIBER a where a.unique_id = input_fiber_id;
Please give your inputs and feedback.
Regards
Venkat

"This page contains the following errors: error on line 1 at column 1: error on line 1 at column 1: Encoding error Below is a rendering of the page up to the first error"

I am getting this error since purchasing my latest book:
“This page contains the following errors: error on line 1 at column 1: error on line 1 at column 1: Encoding error
Below is a rendering of the page up to the first error”
This message also appears on some, but not all books I purchased earlier.
I've tried to restart my iPhone (5) and downloaded iBooks (and the books itself) again several times but nothing has changed. I’m also synced the iPhone via iTunes without luck.
It’s the latest version of iBooks from Appstore. The same books on iBooks for iPad and Mac working fine!
iOS 7.0.6
iBooks 3.2 (2083)

Did you Reset your iphone?

Link between delivery line item and sales order item schedule line.

Hello friends,
This is a continuation of my earlier query - for which I got half the solution, and this is the remaining problem.
I want to know: from delivery document line item, how to link it to sales order line item's schedule line (when there are multiple schedule lines with identical quantities).
Thanks for your help.
- Chetan

This is the code which i used for the same purpose and its working.
Hope this will help you too....
****it_itab is my final internal table.
*Internal table for manupulating the Delivery balance when
*its used in more than one schedule line
TYPES: BEGIN OF ty_new,
       vbeln TYPE vbep-vbeln," so no
       posnr TYPE vbep-posnr," so line no
       etenr TYPE vbep-etenr," schedule line
       delno TYPE lips-vbeln,"delivery no
       delposnr TYPE lips-posnr,"del item no
       totval TYPE vbep-wmeng," total del wise value
       val   TYPE vbep-wmeng," del wise used value
       sdval TYPE vbep-wmeng,"schedule wise del used value
       sdtotval TYPE vbep-wmeng," total Schedule value
     END OF ty_new.
DATA:it_new TYPE ty_new OCCURS 0,
     wa_new TYPE ty_new.
DATA: it_vbepvb TYPE TABLE OF vbepvb,
        wa_vbepvb LIKE LINE OF it_vbepvb,
        fvbfa TYPE TABLE OF vbfa,
        fvbup TYPE TABLE OF vbup,
        fvbap TYPE TABLE OF vbapvb.
LOOP AT it_vbak INTO wa_vbak.
    LOOP AT it_vbap INTO wa_vbap
            WHERE vbeln = wa_vbak-vbeln.
SELECT * FROM   vbfa INTO TABLE fvbfa WHERE vbelv = wa_vbap-vbeln
                                         AND posnv = wa_vbap-posnr.
SELECT * FROM   vbup INTO TABLE fvbup WHERE vbeln = wa_vbap-vbeln
                                         AND posnr = wa_vbap-posnr.
SELECT * FROM   vbap INTO TABLE fvbap WHERE vbeln = wa_vbap-vbeln
                                         AND posnr = wa_vbap-posnr.
SELECT * FROM   vbep INTO TABLE it_vbepvb WHERE vbeln = wa_vbap-vbeln
                                         AND posnr = wa_vbap-posnr.
CALL FUNCTION 'RV_SCHEDULE_CHECK_DELIVERIES'
    EXPORTING
      fbeleg                        = wa_vbap-vbeln
      fposnr                        = wa_vbap-posnr
FVERRECHNUNG                  = ' '
FS073_ALT                     = ' '
IF_NO_SORT                    = ' '
    TABLES
   fvbfa                         = fvbfa
   fvbup                         = fvbup
   fxvbep                        = it_vbepvb
FVBLB                        =
    fvbap                        = fvbap
EXCEPTIONS
FEHLER_BEI_LESEN_FVBUP        = 1
FEHLER_BEI_LESEN_FXVBEP       = 2
OTHERS                        = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT it_vbepvb BY vbeln posnr edatu.
LOOP AT it_vbepvb INTO wa_vbepvb
                WHERE vbeln = wa_vbap-vbeln
                  AND posnr = wa_vbap-posnr.
    to write data of schedule line with no delivery
    MOVE wa_vbepvb-olfmng_flt TO wa_itab-openqty.
    IF wa_vbepvb-bmeng EQ wa_itab-openqty.
      CLEAR wa_itab.
      PERFORM schedule_data. "schedule line based data to be displayed
      MOVE: wa_vbap-lgort TO wa_itab-lgort.
      MOVE: wa_vbepvb-etenr TO wa_itab-etenr,
            wa_vbepvb-bmeng TO wa_itab-kwmeng,
            wa_vbepvb-olfmng_flt TO wa_itab-openqty.
      APPEND wa_itab TO it_itab .
      CLEAR wa_itab.
    ENDIF.
    LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_vbepvb-vbeln
                                        AND posnv = wa_vbepvb-posnr.
      READ TABLE it_likp INTO wa_likp WITH KEY vbeln = wa_vbfa-vbeln.
      CHECK wa_likp-bldat >= wa_vbepvb-edatu.
check the Delivery doc date with the schedule line confirmed date
      CLEAR: delbal, deltot,wa_new.
      LOOP AT it_new INTO wa_new WHERE vbeln = wa_vbepvb-vbeln
                                     AND       posnr = wa_vbepvb-posnr
                                     AND       etenr = wa_vbepvb-etenr.
        deltot = deltot + wa_new-sdval.
      ENDLOOP.
      delbal = wa_new-sdtotval - deltot.
      CHECK sy-subrc <> 0 OR delbal GT 0.
      MOVE wa_vbepvb-olfmng_flt TO wa_itab-openqty.
      CHECK wa_vbepvb-bmeng NE wa_itab-openqty.
****To check whether this delivery is already fully allocated against
any other schedule.
LOOP AT it_lips INTO wa_lips WHERE vbeln = wa_vbfa-vbeln
                                       AND posnr = wa_vbfa-posnn.
        MOVE: wa_likp-bolnr TO wa_itab-vesname.
        MOVE: wa_likp-vbeln TO wa_itab-delno.
        MOVE: wa_likp-wadat TO wa_itab-wadat.
        MOVE: wa_likp-anzpk TO wa_itab-anzpk.
        MOVE: wa_likp-lddat TO wa_itab-lddat.
        MOVE: wa_likp-ernam TO wa_itab-ernam.
******end of code added by IVL1 on sep 27 2007 #3618
        PERFORM schedule_data.
        IF wa_lips-umvkz <> 0.
          tempquant = wa_lips-umvkn / wa_lips-umvkz.
        ELSE.
          tempquant = wa_lips-umvkn. "delivery qty
        ENDIF.
        tempquant = tempquant * wa_vbfa-rfmng.
***New logic added to get delivery qty schedule wise****
        MOVE: wa_vbepvb-etenr TO wa_itab-etenr,
              wa_vbepvb-bmeng TO wa_itab-kwmeng,
              wa_vbepvb-olfmng_flt TO wa_itab-openqty. "jo
**if delivery qty is less than or equal to schedule line qty******
        IF tempquant LE wa_vbepvb-bmeng.
          wa_itab-delqty = tempquant.
          LOOP AT it_new INTO wa_new WHERE vbeln = wa_vbepvb-vbeln
                                     AND     posnr = wa_vbepvb-posnr
                                     AND     etenr = wa_vbepvb-etenr
                                     AND     delno = wa_lips-vbeln
                                     AND     delposnr = wa_lips-posnr.
            MOVE-CORRESPONDING wa_itab TO wa_new.
            wa_new-delposnr = wa_lips-posnr.
            wa_new-val = tempquant.
            wa_new-totval = tempquant.
            wa_new-sdval = tempquant.
            wa_new-sdtotval = wa_vbepvb-bmeng.
            MODIFY TABLE it_new FROM wa_new .
            IF NOT sy-subrc IS INITIAL.
              APPEND wa_new TO it_new.
            ENDIF.
          ENDLOOP.
          IF sy-subrc <> 0.
            MOVE-CORRESPONDING wa_itab TO wa_new.
            wa_new-delposnr = wa_lips-posnr.
            wa_new-val = tempquant.
            wa_new-totval = tempquant.
            wa_new-sdval = tempquant.
            wa_new-sdtotval = wa_vbepvb-bmeng.
            APPEND wa_new TO it_new.
          ENDIF.
         wa_itab-delqty = tempquant.
         CLEAR tempquant.
        ELSE.
    lips qty > so schedule lineqty
          CLEAR deltol.
          LOOP AT it_new INTO wa_new WHERE    vbeln = wa_vbepvb-vbeln
                                      AND      posnr = wa_vbepvb-posnr
                                     AND     etenr = wa_vbepvb-etenr
                                      AND     delno = wa_lips-vbeln
                                      AND    delposnr = wa_lips-posnr.
            deltol = deltol + wa_new-val.
          ENDLOOP.
          LOOP AT it_new INTO wa_new WHERE    vbeln = wa_vbepvb-vbeln
                                      AND      posnr = wa_vbepvb-posnr
                                      AND     delno = wa_lips-vbeln
                                      AND    delposnr = wa_lips-posnr.
            MOVE-CORRESPONDING wa_itab TO wa_new.
            wa_new-val = wa_new-totval - deltol.
            wa_itab-delqty = wa_new-val.
            wa_new-delposnr = wa_lips-posnr.
            wa_new-totval = tempquant.
            wa_new-sdval = wa_new-val.
            wa_new-sdtotval = wa_vbepvb-bmeng.
            MODIFY TABLE it_new FROM wa_new .
            IF NOT sy-subrc IS INITIAL.
              APPEND wa_new TO it_new.
            ENDIF.
          ENDLOOP.
          IF sy-subrc <> 0.
            MOVE-CORRESPONDING wa_itab TO wa_new.
            wa_itab-delqty = wa_vbepvb-bmeng.
            wa_new-delposnr = wa_lips-posnr.
            wa_new-val = wa_vbepvb-bmeng.
            wa_new-totval = tempquant.
            wa_new-sdval = wa_vbepvb-bmeng.
            wa_new-sdtotval = wa_vbepvb-bmeng.
            APPEND wa_new TO it_new.
          ENDIF.
        ENDIF.
        IF NOT wa_lips-lgort IS INITIAL.
          MOVE: wa_lips-lgort TO wa_itab-lgort.
        ELSE.
          MOVE: wa_vbap-lgort TO wa_itab-lgort.
        ENDIF.
        APPEND wa_itab TO it_itab .
        CLEAR wa_itab.
      ENDLOOP.
    ENDLOOP.
    CLEAR wa_vbepvb.
ENDLOOP.
    ENDLOOP.
    CLEAR wa_vbak.
ENDLOOP.

How can I connect dots across missing data points in a line chart?

Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1              Column 2      Column 3
Aug 16, 2011         87.1             15.4
Aug 17, 2011         86.6
Aug 18, 2011         86.1
Aug 19, 2011
Aug 20, 2011         85.7             14.6
Aug 21, 2011         85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!

Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Is it possible to quickly straighten lines or remove multiple points of a line

Similar Messages

Maybe you are looking for