Is it possible to run SkinLF within NetBeans 4.0 environment?

I have downloaded SkinLF and very eager to use it. I want to use it through NetBeans 4.0. For themes there are no problems (thanks to sabre150). But when I want to use NativeSkin or trying to run Batch File from SkinLF it says "If you are using JDK 1.4 (I am using jdk1.5) and it complains about jawt.dll use jdk.home\jre\bin\java instead of jdk.home\bin\java". I have tried to change NetBeans .config file but then NetBeans failure to run. May be I am doing something not in a right way or it is impossible to run SkinLF within NetBeans 4.0 environment at all?
Please help.

As I said, when I am trying to use SkinLF through NetBeans 4.0. it starts complaining about jawt.dll (as described above).
I have tried to change NetBeans .config file but then NetBeans failure to run.
If you are not using SkinLF probably it is hard to understand what's going on. But people who use it should know. I wonder whether it is possible to run SkinLF within NetBeans 4.0 or I have to refuse any attempts.
You are good just because I consider those who try to help as good one.

Similar Messages

Is it possible to run a java application within a web browser?

Hello everyone here! I have a question about running a java application within a web browser and I would appreciate it very much if anyone here can give me some answers.
I have a standalone java application written with AWT. Basically this free application lets users to select spectral lines from a big file based on some criteria and plot those selected lines. Yes, it is a very simple application. Now I want to run this application within a web browser so that users don't need to download the application from the ftp site and thus don't need to install in their machine. Is it possible to run this application within browser? If yes, can we get the same plotting function as we run the application separately and where should I start out?
Thanks in advance!
kuilian

Please see the signed applet discussion group for details of how to avoid the applet security restrictions. You can sign the applet, or use the policy file containing {AllPermission} for testing purposes (though not suitable for widespread deployment).
Regards
Matthew

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

Is it possible to run Acrobat3D from the command line?

I'd like to know if it is possible to run Arobat3D from the command line in batch mode. I'm interested in knowing if this is possible in either a windows or unix environment.
My objective is to convert CAD data e.g. CATIA V5 or DXF etc to PDF, in batch mode without using the Acrobat3D interface itself.
I know that it's possible to run a batch process from within Acrobat3D itself, therefore one solution may be to invoke those batch processes from the command line.
I've looked through the other listings on this forum and seen this question asked previously, but I've not seen any responses that suggest this is even a feasible concept.

As of now, it's not possible in the cmd-mode to just remain connected and not stream.
But the reason you want to do that is because of the long start-up time. That 20 sec time can be divided into:
1. launch time
2. time to start encoding (after pressing start button) -> cannot be reduced even if 'connected only' feature is available in cmd-line
Below are tips you can use to reduce this 20 sec of time:
1. Lesser the no. of devices connected to the system, shorter is the launch time. Disable the devices which are not to be used in the session.
2. Try using device indexes (0, 1, 2, etc) instead of device names in the profile. Indexes might change after you disable some of the devices.
3. Use the profile with correct settings, to avoid any validation errors.
4. Higher the video size, higher is the overall time. Small sizes take lesser time to start.
Let me know if you see any improvement in the startup time.

Is it possible to run a command when a monitor goes to a healthy state?

Hi, I'm using SCOM 2007R2
Is it possible to run a command/script when a web application Monitor changes to a healthy state?
I have a web application monitor that checks four different websites from our proxy servers. on the aggregate rollup of all four sites I have a health rollup policy of 'Best state' meaning
that the monitor will only go critical if all four sites are unreachable. If that happens I have a Diagnostic task that runs to Stop the w3svc service.
This stops the proxy server serving ‘Page cannot be displayed’ content to the users within the company.
What I would like to do is start IIS automatically when the web application monitor goes to a healthy state.
I’m guessing I’m going to need a script that perhaps pings the sites every few minutes then starts the w3svc service if it gets a result.

Hi,
I recommend you touch the Orchestrator, Orchestrator can integrate
SCOM.
Use Orchestrator to design a Runbook for your task. When the state of a web application Monitor changes to healthy, then run a command/script.
System Center 2012 Orchestrator.
Orchestrator is a workflow management solution for the data center. Orchestrator lets you automate the creation, monitoring, and deployment of resources in your environment.
For more information, please review the link below:
System Center Integration Pack for System Center Operations Manager 2007 R2
http://technet.microsoft.com/en-us/library/hh531770.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Applet not running outside of netBeans

I have an applet that was compiled & built within NetBeans 4.1 under jdk1.5.0_04. It runs perfectly inside of NetBeans. It doesn't run outside of NetBeans.
I created the HTML launcher file and placed it in the same folder where the applet class file resides.
<HTML>
<BODY>
<APPLET CODE=Main.class
WIDTH=250
HEIGHT=130>
</APPLET>
</BODY>
</HTML>
When I launch the HTML file under windows XP I get a NullPointerException.
When I try to use appletviewer I get the following:
Warning:Can't read AppletViewer properties file: c:\Documents and Settings\walter88\.hotjava\properties using defaults. I/O exception while reading: c:\Program (The system cannot find the file specified).
Someone please help this 'newbie'.
Thanks.

Thanks for your reply. here is the applet code:
package javaapplication4;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.text.DecimalFormat;
public class Main extends JFrame
    implements ActionListener {
    private JButton button;
    public static void main(String[] args) {
        Main frame = new Main();
        frame.setSize(400, 300);
        frame.createGUI();
        frame.setVisible(true);
    private void createGUI() {
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        Container window = getContentPane();
        window.setLayout(new FlowLayout() );
        button = new JButton("Press me");
        window.add(button);
        button.addActionListener(this);
    public void actionPerformed(ActionEvent event) {
        DecimalFormat df1 = new DecimalFormat( "#####.0000");
        String Od, Length, Weight, Density;
     double od, length, weight, density, const_1, const_2, or, wall;
     Od = JOptionPane.showInputDialog("Enter OD of tubing (inch)");
     Length = JOptionPane.showInputDialog("Enter length (inch)");
     Weight = JOptionPane.showInputDialog("Enter weight (grams)");
     Density = JOptionPane.showInputDialog("Enter density (lbs/in3)");
     od = Double.parseDouble( Od );
     length = Double.parseDouble( Length );
     weight = Double.parseDouble( Weight );
     density = Double.parseDouble( Density );
     or = .5 * od;
     const_1 = 3.14159 * 453.59 * density * length;
     const_2 = -4 * const_1 * or;
     wall = (-const_2 - Math.sqrt(const_2 * const_2 - 4 * const_1 * weight))/(2 * const_1);
        JOptionPane.showMessageDialog(null, "Wall thickness is: " + df1.format(wall) + " inch");
}

How to force SequenceFileUnload callback to run from within operator interface

I need to force SequenceFileUnload callback to run from within operator interface arbitrary, with possibility to control execution flow.
I.e. discarding object handle of execution object, which has client sequence file, which has SequenceFileUnload callback, causes it(SequenceFileUnload callback) to run. Unfortunately, after discarding execution object handle, it can be used to control execution flow(pausing, aborting, terminating).

Thanks for the clarification. Here are the answers to your 3 questions:
1) You can programmatically run any sequence (including callbacks) by using the TestStand API Engine.NewExecution() method.
2) The Execution API object has several control methods for breaking, aborting, terminating, restarting, etc... All you need to do is obtain a reference to the Execution you want to perform one of these actions on and call the appropriate method on the reference. If you start the SequenceFileUnload callback with the Engine.NewExecution method, this returns a reference to the Execution object that you can call these methods on. If you don't use the NewExecution method, you can do a check in your UIMsg event handler for the StartExecution UIMsg event
for an execution starting that is running the SequenceFileUnload callback, and simply manipulate the Execution reference the UIMsg contains as you see fit.
3) To disable the SequenceFileUnload callback for a sequence file that is currently loaded. You can set the SequenceFile API object property "UnloadCallbackEnabled" to FALSE, and the callback will not execute for that file when it is unloaded unless you go back and reset the property to true before unloading. Note this property is reset each time you load the file.
For more information on the TestStand API objects, methods, and properties discussed in this post, refer to the TestStand Programmer Help accessed through the Sequence Editor's Help >> TestStand Programmer Help menu selection.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Running form within the browser

Is it possible to run a form using the JInitiator and Application Server within the browser window instead of the form creating its own work area outside of the browser? Any help would be greatly appreciated.
Thanks,
Bucky

Hi
Set the separateFrame parameter to false.
This can be done by supplying parameters directly in the URL or in a form specific section in the formsweb.cfg file

Is this possible to run a program on one server(e.g. development server) on

Is this possible to run a program on one server(e.g. development server) on another server via remote log on, or any other such technique

Hi Surbhi,
RfC are remote function calls through which u can remotely access other system.
RFC
Purpose
Communication between applications of different systems in the SAP environment includes connections between SAP systems as well as between SAP systems and non-SAP systems. Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
Synchronous RFC
The first version of RFC is synchronous RFC (sRFC). This type of RFC executes the function call based on synchronous communication, which means that the systems involved must both be available at the time the call is made.
Transactional RFC (tRFC)
Transactional RFC (tRFC, also originally known as asynchronous RFC) is an asynchronous communication method that executes the called function module in the RFC server only once. The remote system need not be available at the time when the RFC client program is executing a tRFC. The tRFC component stores the called RFC function, together with the corresponding data, in the SAP database under a unique transaction ID (TID).
If a call is sent, and the receiving system is down, the call remains in the local queue until a later time. The calling dialog program can proceed without waiting to see whether or not the remote call was successful. If the receiving system does not become active within a certain amount of time, the call is scheduled to run in batch.
tRFC is always used if a function is executed as a Logical Unit of Work (LUW). Within a LUW, all calls are
·         executed in the order in which they are called
·         executed in the same program context in the target system
·         run as a single transaction: they are either committed or rolled back as a unit.
Implementation of tRFC is recommended if you want to guarantee that the transactional order of the calls is preserved.
Disadvantages of tRFC
·       tRFC processes all LUWs independent of one another. Due to the amount of activated tRFC processes, this procedure can reduce performance significantly in both the send and the target systems.
·       In addition, the sequence of LUWs defined in the application cannot be kept. Therefore, there is no guarantee that the transactions are executed in the sequence dictated by the application. The only guarantee is that all LUWs are transferred sooner or later.
Queued RFC (qRFC)
To guarantee that multiple LUWs are processed in the order specified by the application, tRFC can be serialized using queues (inbound and outbound queues). This type of RFC is called queued RFC (qRFC).
qRFC is therefore an extension of tRFC. It transfers an LUW (transaction) only if it has no predecessors (in reference to the sequence defined in different application programs) in the participating queues.
Implementation of qRFC is recommended if you want to guarantee that several transactions are processed in a predefined order.
RFC: Data Transfer
All RFC types are transferred by means of CPI-C or TCP/IP. They constitute a form of gateway communication.
HOPE I ANSWERED TO UR POINT
reward if helpful
thanks and regards
suma

CodeShield within NetBeans 3.6

Does anyone have experience with CodeShield within NetBeans 3.6?
I am investigating the feasibility of obfuscating our Java applications prior to release and admit to not knowing a great deal about the process or the tools available.
Any assistance greatly appreciated.

Thanks for the feedback.
The documentation is not really that helpful to me but it does indicate that the classpath requires modification to allow the obfuscate process to run properly.
I just don't seem to be able to configure NetBeans correctly as I have mounted the JAR file and defined my arguments for CodeShield but no classes are produced in the target folder.
I'll pull a batch file together to do it the "old fashioned way" and see where that gets me.
Any recommendations for other obfuscating packages???
Thanks again

Is it possible to run sub vi and main vi at same time from startup?

Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up and close the sub vi`s, but when my sub vi`s are closed, nothing is happening in them...and they start to run again when I open them...and I have to close them if my main VI is supposed to run. So the data in the chart is only from the periodes when the sub vi has been open.
Thanks in advance for your help!

I will send my labview programs. "Hovedprogram" is my main vi, "front" and "front 2" is my sub vi`s. I am also using global variables. I have already searched the discussion forum trying to find an answer to my problem, but I haven`t quite managed yet...
My sub vi`s are not connected to any instrument now, but I have inserted a sinewave-generator and a chart in "front"(my sub vi) so I am able to see that the sub vi actually stop running when i close the window.
Attachments:
front2.vi ‏17 KB
Hovedprogram.vi ‏42 KB
front.vi ‏69 KB

How to schedule a job to run twice within a request set?

How to schedule a job to run twice within a request set?

Create one more stage for the same concurrent program.
Thanks
Nagamohan

Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

Hi there,
Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
If it won't work, then why?
Best Regards,
Stefan

Hi there, Klaus1, BDAqua and a brody,
Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
Kind Regards,
Stefan

Is it possible to run an application from a user or container login script?

Is it possible to run an application from a user login script or a container login script?
A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
Thanks,
Marc

> Is it possible to run an application from a user login script or a
container login script?
Yes, see the documentation:
http://www.novell.com/documentation/...a/a7q6999.html
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Is it possible to run a java program without using the command prompt?

Hi,
I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
Cheers

Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

Is it possible to run SkinLF within NetBeans 4.0 environment?

Similar Messages

Maybe you are looking for