Is it possible to setup a bootable environment for a USB-6212 application written in LabVIEW?

I have an application that uses a USB-6212 and involves both motion control and DAQ functions.  I would like to create a bootable external hard drive that has the compiled program, LabVIEW runtime and DAQ all installed and stable under some version of Windows.  I am having a lot of configuration hassels whenever someone runs into a snag on an older machine, that is back several versions or when I need to install a test station and the new computer has a Windows 7 where there isn't a version of DAQ traditional.  Is this possible?

Hey hsb,
What you want to do is build an Installer. During this build, you will have to include all Run Time Engines, and any other driver you need to get your USB to work. Windows 7 does not technically have support for Traditional DAQ, but you can give this Beta version a try. I know it says Vista on there, but it has also shown to work with Windows 7.
Once you have an installer made, when you run it on any test station, or new computer, it should run fine for you. Traditional DAQ is very tricky now. Are you sure you cannot use DAQmx?
Please let me know if these suggestions work for you.
Thanks and have a great day!
Ricky
National Instruments
Applications Engineer

Similar Messages

  • How to setup the cluster environment for BPM using weblogic

    want to setup the cluster environment for BPM using weblogic....
    i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
    i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
    i can launch the process administrator and import the project exp file to domain server.
    but what should i do to setup cluster environment using weblogic?
    what i want to do is :
    setup one admin machine..
    setup two product machine..
    enable the cluster so the admin machine can monitor the status of the product machine..
    thanks a lot ...

    The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
    Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
    Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
    Let me know any specific config questions and I'll do my best to answer them for you.
    Thanks,
    Mike

  • Is it possible to setup a BB mailbox for one user and a different user's calendar on the same BB?

    Is it possible to setup a BB mailbox for one user and a different user's calendar on the same BB?

    No, not if your connected to a BES server.

  • Is it possible to setup a different language for the user account?

    Hi,
    My server is in English but many of my users will use French.
    Can I setup in WGM a different language (international) for the user?

    The settings are changed in at least three locations for a user account. Changes are made to ~/Library/Preferences/.GlobalPreferences, ~/Library/Preferences/com.apple.HIToolBox.plist, and ~/Library/Preferences/ByHost/com.apple.HIToolBox.<MACAddress>.plist. There are a lot of keys in there that get changed and might vary between 10.4.x and 10.5.x -if you have a mixed OS environment. So while you you may be able to import the first two into WGM, the last one might be the most trouble as it's machine specific.
    If you gave access to the 'International' System Prefpane, it wouldn't affect anything but the student account since their prefs are saved to a network location or to their local PHD account. Changes would revert to whatever the system default preferences were on logout. Those would be the prefs in /Library/Preferences.
    The 'International' System Prefpane has many listings for the other language choices that are installed on the system which could be a source of confusion for student users. Removing those resources, using certain tools like MonoLingual, can make certain software behave badly or even make the system unusable. Use with caution.

  • Is it possible to setup for 2G calls and 3G data?

    Hi all
    Is it possible to setup my iPhone 3G for the following:
    - 2G primary mode for calls as 2G coverage is usually better for calls.
    - 3G on a adhoc basis for data on a need to basis.
    Looking through the settings page, there is only one selection for 2G or 3G. If 3G is selected, calls and data will be 3G only.

    You can manually turn 3G off so that the phone is in Edge mode all the time and then turn 3G on when you surf. There is no automated way to accomplish this, although many have requested this would be a great feature. Personally, I get great battery life leaving my phone on 3G, so I no longer manually toggle between the 2. 2.0.1 and 2.0.2 have been good for me.

  • Development environment for 10g R2

    Guys,
    I need to setup a development environment for oracle 10g r2 forms development. I am a new to oracle and due to downsizing we lost our DBAs so I am on my own and need your huge support.........
    Current settings: Oracle on the server: Oracle 10g R2
    My local client installation: 10.1.0.4.2
    Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
    * Is this a correct development environment? or any incompatibility do you see with this? *
    Secondly, I heard various stuff about development environment and would like your input as well:
    * Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server where oracle is installed? *
    * Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *
    Please help me to resolve my confusion so I can present the development environment to my management.....
    Thank you soo much...
    -Raj
    Edited by: user12236377 on Jan 28, 2010 10:55 AM

    Current settings: Oracle on the server: Oracle 10g R2
    My local client installation: 10.1.0.4.2
    Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
    * Is this a correct development environment? or any incompatibility do you see with this? *If you want to go with Forms 10G, i would apply the latest patch set (i think its 10.1.2.3, but would suggest to consult Metalink for that)
    * Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server >where oracle is installed? *Yes, you can develop "locally" on your PC using only OC4J, but for integrationtests it might be useful to have an "test"-OAS (Oracle Application server 10.1.2)
    * Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *For running 10G forms in production you will need an OAS (Oracle Application server 10.1.2), not a WebLogic-server.
    As an alternative to 10G, you could also start directly using Forms11G, which is the latest release. In this case you need a WebLogic-Server 11-installation both for development as also for production.

  • Development Environment for Server APIs in Webcenter Interaction 10.3

    Hi, I installed “Oracle Web Center Interaction 10.3" on standard environment mentioned by oracle (Window 2003 server, IIS6.0, SQL Server 2005). Everything works fine concerning the portal and services.
    I also have visual studio 2005 on the same machine and trying to setup a development environment where I can user server APIs (I start with creating IPTSession).
    I am using follwong code to start with:
    /String serverConfigDir = ConfigPathResolver.GetOpenConfigPath();
    IOKContext configContext = OKConfigFactory.createInstance(serverConfigDir, "portal");
    PortalObjectsFactory.Init(configContext);
    IPTSession ptSession = PortalObjectsFactory.CreateSession();
    Problem: code compiles if I add few dlls, but it do not run, it throws following error
    com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
    I think either server APIs are not more supported in 10.3 or I do not know how to setup the development environment for server APIs.
    Can anyone help??

    i have already tried putting hardcoded path but it didn't help, morover the previous line gives me correct path.
    I issue i mentioned seems to be related with some setting or missing native dlls
    com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
    i got follwing extract from the wsserver-wrapper.log file
    INFO | jvm 1 | 2009/02/20 12:26:17 | 2-20-2009     12:26:17.606     Info     OpenKernel.Config     Disabled-1235112977434     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\ptws\10.3.0\bin\..\..\..\common/../settings
    INFO | jvm 1 | 2009/02/20 12:26:18 | 2-20-2009     12:26:18.325     Info     OpenKernel.Config     Disabled-1235112977434     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
    INFO | jvm 1 | 2009/02/20 12:26:18 | container config context:EAS:wsserver
    i didn't modified anything in any config file, just configured everything on one machine with oracle configuration manager

  • How can I setup different number range for each company code?

    Dear GURU,
         Is it possible to setup different number range for material document by company code? If yes, what should i do.
         Thank you in advance.
    Thammarit

    Hi,
    you maintain the number assignment for the following documents:
    material documents
    physical inventory documents
    The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
    The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
    Caution: Change in the Fiscal Year
    If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
    Example:
    Interval for 1995: 4900000000 to 4999999999 status: 4900451234
    Interval for 1996: 4900000000 to 4999999999 status: 4900000000
    If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
    In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
    Physical inventory documents
    Number range interval from 0100000000 to 0199999999
    This group contains the following transaction/event types:
    - IB Physical inventory documents
    - ID Physical inventory documents for counts and differences
    without reference
    - IN Physical inventory documents for recounts
    - IZ Physical inventory documents for count without reference
    - WV Physical inventory documents for difference postings in the WM System
    Material documents for goods movements and inventory differences
    Number range interval from 4900000000 to 4999999999
    This group contains the following transaction/event types:
    - WA Goods issues, transfer postings, other goods receipts
    - WH Goods movements for handling units (HU)
    - WI Material documents for inventory adjustment postings
    - WL Goods issues for delivery documents (SD)
    - WQ Goods movements for usage decisions (QM)
    - WR Goods movements for completion confirmations (PP)
    - WS Goods movements for run schedule headers (PP)
    - WZ Documents for batch status changes
    Material documents for goods receipts
    Number range interval from 5000000000 to 5999999999
    This group contains the following transaction/event types:
    - WE Goods receipts for purchase orders
    - WF Goods receipts for production orders
    - WO Subsequent adjustment of subcontract orders
    - WW Subsequent adjustment of active ingredient materials
    Inventory sampling numbers
    Number range interval from 0200000000 to 0299999999
    This group contains the transaction/event type SI.
    SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
    Note
    For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
    Actions
    Check whether you can use the predefined groups and number intervals.
    If you want to change any groups, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select the transaction/event type that you want to re-allocate.
    c) Place the cursor on the new group and choose Edit -> Assign element group).
    d) Save your settings.
    If you want to define new groups, proceed as follows:
    a) Select Group -> Maintain.
    b) Then select Group -> Insert.
    c) Enter a text for the number range group.
    d) Maintain the number interval for this number range group.
    e) Allocate the transaction/event types to the number range groups (see step 2).
    If you want to maintain new number range intervals for an existing group, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select a group and choose Interval -> Maintain.
    c) Choose Edit -> Insert year.
    d) Maintain the number interval for the new fiscal year.
    If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
    Note on transport
    You transport number range objects as follows:
    In the initial screen, choose Interval -> Transport.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    Thanks and regards
    Rajesh

  • Laptop configuration for using VM test environment for ORALCE

    Guys,
    I would like to setup an VM environment for learning ORACLE on laptop. What sort of configuration of laptop will be good for making use of it?
    Regards,
    sakthivel

    Hi Sakthi,
    That depends on the requirement of your testing.I would recommend you Min 4GB RAM (If it includes RAC testing) too.

  • Question is it possible to build a Development environment from my current production environment VMs

    My server admin thinks it is possible to setup a new development environment using copies of the Production VMs.
    He will rename the SQL Server and Sharepoint vms see below:
    SHAREPOINT SERVER
    IP: New IP Address
    FQDN: DEVSharePoint.Local
    SharePoint SQL SERVER
    IP:New IP address
    FQDN: DEVSQLSRV.Local
    Wouldn't I also need to point IIS in the VM to the new DevSharePoint and new DevSQL using the CA, but curently it is looking like the CA points back to the orignal CA and I don't want to remove a server if that is correct?  Also how would I point to
    the Central Admin Site to the new location?
    how can I quickly resolve this?  so I don't impact the current environment with testing new development?

    I think that the best if to create new dev environment.
    Then you can migrate your current SharePoint databases (Content, Services) to the new dev environment.
    References:
    Create Dev SharePoint Environment
    Move Content Databases in SharePoint 2013
    [custom.development]

  • Server setup in DMZ Environment

    Hi,
     Iam setting up a DMZ environment to have External customers access my Servers sitting in the DMZ. I have attached the diagram for reference.
    Proposed Setup
    1) 2x ISP links (redundant) - IPSEC connections from customer terminating on our Internet Facing FWs.
    2) There are 2 DMZ FWs separting the Corporate (internal) and External environment.
    3) The APP server and Jump server is placed behind the Server switches.
    Requirement
    1) External customer needs to access Jump server and APP server from over the Internet IPSEC VPN
    2) Internal (Corporate) users need to access the Jump server and App server.
    3) Any user accessing the Jump server would need to get authenticated with from a Domain controller. Domain controller would be on the Internal corporate segment
    Questions
    1) With the current design, Internal users have to pass DMZ FW and Internet FW to access server. Is it recommended? Is it ok to connect the servers behind a separate pair of server switches? Or can they connect directly to DMZ switches? What is the best possible solution (standard) that is generally followed in this case?
    2) If there are multiple customers with IPSEC VPNs coming in, can VLANs be defined and access given accordingly to the servers?
    Appreciate your inputs.
    Cheers
    Mikey

    Hi Mikey,
    I am not sure why you have kept the corporate network under the dmz zone. In general security practice we use to keep the dmz zone/dmz firewall for having the server/hosting environment where external parties requires access to those.... for example web server / application server.....
    So your design requires some change in order to have a better architecture....
    internet
    |
    router
    |
    external SW
    |
    internet facing firewalls
    |
    DMZ SW and Junp Server / Application Server (DMZ Interface of the Firewall).
    Internet facing Firewall
    |
    LAN Interface SW (Inside Interface of the firewall)
    |
    LAN FW (If you really want to keep it)
    |
    Corporate Network
    Regards
    Karthik

  • Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

    Hi there,
    Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
    Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
    I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
    If it won't work, then why?
    Best Regards,
    Stefan

    Hi there, Klaus1, BDAqua and a brody,
    Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
    My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
    The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
    Kind Regards,
    Stefan

  • Is it possible to setup an alert before the form opens?

    Is it possible to setup an alert before the form opens? If yes how would I do that?
    I have tried to create an alert in preOpen java script but the "preOpen" option is greyed out.
    thank you

    The iPhone will set up any version of the AirPort Extreme from Generation 1 through 6.
    Once you have the AirPort setup, you might want to downloand and install AirPort Utility to be able to make any changes or adjustments to the AirPort.
    AirPort Utility on the App Store on iTunes

  • How to setup the environment for doing the Performance Testing?

    Hi,
    We are planning to start the performance testing for iProcurement Product, Max number of user we are going to use 1000. For this simulation, what are all basic setups need to do for Application Tier, Database Tier,etc... Can anyone suggest what is procedure to setup environment depending upon the load?

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • Is it possible to setup iTunes so, that it would automatically watch some directory?

    Is it possible to setup iTunes so, that it would automatically watch some directory, the way it works in similar programs like WinAMP and Songbird? In iTunes I have to "add" the same directory over and over again to see my new mp3s in iTunes's media library.

    ed2345 wrote:
    eugrus wrote:
    So, it can't work the way it does in mentioned (in fact, all other) media libraries?
    As Turing notes, you need 3rd party software.  The popular choice (although I have not personally used it) is iTunes Folder Watch:  Are you frustrated that iTunes does not automatically detect new multimedia files in certain nominated folders and add them to its library automatically?.
    Thank you! I'll try it!

Maybe you are looking for