Is it possible to use Visual C 6.0 only to simulate a temperature of a room?

Im using microsoft visual C++ 6.0 to build the system without using measurement studio. Is ti still can simulate the system?

Hi:
Thank you for contacting National Instruments.
Yes, you can measure the temperature of the room using Visual C++ without Measurement Studio. However, you will not have access to the powerful data analysis algorithms, scientific user interface controls & graphs and easy to use networking features that ship with Measurement Studio.
Using Measurement Studio will increase productivity and make DAQ programming easier.
If you have additional questions, please do not hesitate to contact me.
Regards,
Bharat S
Applications Engineer
National Instruments
Penny

Similar Messages

Execution of Coded UI scripts with least possible test execution time in Windows7 Operating system using Visual Studio Test Agent 2010 without VS2010 installed

Hi All,
We are trying to execute coded UI scripts without Visual Studio installed. We are using “Visual Studio Test Agent 2010” for executing coded UI scripts without VS2010 in Windows 7, it is working fine. Also we verified executing the same script with VS2010
Premium, it works fine as well.
Here the challenge we are facing is with the Test execution time.
When we run the coded UI script with IE11-Windows 7 OS-Visual Studio 2010 Premium it takes
3min 36sec to complete the execution whereas with IE11-Windows 7 OS-Visual Studio Test Agent 2010 it takes
6min 40sec for the same script to execute (which is almost double the time it takes while executing using VS2010).
My question is what may be the reason for this difference? and how we can reduce the test execution time when running from Test Agent 2010?
Kindly let us know what is the best practice to execute the coded UI scripts with least test execution time in Windows 7 Operating system using Visual Studio Test Agent 2010 without VS2010
installed.
Looking forward for your positive response.
Thanks in advance..!!

Tina-Shi, Thanks for the information.
As you mentioned, we tried to execute the coded UI test using Mstest.exe in command on VS2010 Premium and checked on the execution
time, there was a slight difference.
Please find below execution time.
Using Mstest.exe in command on VS2010 Premium/Win7 – 3.47 minutes
Using VS2010 Premium/Win7 – 3.53 minutes
Using Test Agent/Win7 – 7.3 minutes
Also, I closed all the other processes in Task manager before starting up the execution.
Still , I am facing the same Issue. Could you please suggest any other way to reduce the scripting time of coded UI script execution
through Test agent 2010.
Looking forward for your earliest response.

What are the front end tools & components needed to use Visual composer.

Hi all,
please help for the following queries.
1.What are the front end tools & components needed to use Visual composer.
2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
3. How to create Webreports & Dash Boards in Visual composer.
It's Urgent waiting for responses.
Thanks & Regards,
Basava Raju

Hi James,
For Visual Composer no need any Front end tools.. you need portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
all the reports.. that web based reports or dash boards we can view through Browser only..
for creating reports in visal composer.. just go thru this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
/people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
regards
@jay

Passing output of one iView as input to another iView using Visual Composer

Hi
I need urgent help. Is it possible to pass data from one iView to another using the Visual Composer tool. If it is how? Does anyone have an example or know where I can find one.
Here is my example:
I have created one Page with two iViews on the page. In the first iView i have a Bapi that accepts an ID number of a business partner as input and returns details like Name, Surname , title etc as well as the SAP Business Partner Number. The second Iview uses a Bapi that returns the Address details of the business partner.My problem is that I need to use the Business Partner Number from the first iView as the input into the second iView. Is this possible using Visual Composer? There will be a series of additional all bringing back different details of the same Business Partner and will need to use the same Business Partner Number.
Please advise me if this is possible using VC or if not suggest an alternative way of doing it.
Thanks in advance for the help.
Regards
Yusuf Gangat

Yes you can do this.
You can use ports (Signals) for this.
In order to explaing this, I will call the 1st iView - the source iView and the 2nd one - the target iView.
1. In the source iView create an "Out Port" from the form or table where you have the details you want passed. Name it anyway you want (in the Properties task pane).
2. In the target iView create an "Input Port" and connect it to the input of the BAPI you want run.
3. Make sure that both ports have exactly the same name (it's case sensitive). and the same fields.
4. Deploy the 2 iViews to the portal, put them in the same page.
Data should be transferred now between the iViews.
Lior

Crystal Reports using Visual Studio

I am becoming more comfortable with working with Crystal Reports using Visual Studio. I ran into some issues, but I was able to figure them out. I have ran into one which I am not able to figure out. I would like for you to ask Business Objects if they can assist me on this one. When the reports are displayed, a group tree is displayed to the left of the report making it possible for users to navigate through the reports. As you continue to click down through a branch, eventually you are not able to see what to click on or to click on the next link. What could be done to fix this issue?

Hi,
Have you checked the crystal report in designer mode? If not, try doing it.
Further, you can provide following:
1)Windows or Web Application?
2) Version of Crystal Reports?
3) Version of Visual Studio?
4) OS (32 bit or 64 bit)?
Thanks,
Saurabh

Is it possible to use Microsoft's Java Packages in Forte4Java/JBuilder?

Dear all,
I am wondering whether it is possible to use those java packages installed by MS Visual J++ in Sun's Forte4Java or Borland's JBuilder? I found one of the java packages of Microsoft -- com.ms.com.* quite useful for calling ActiveX Components in java code and I have succeeded in calling my DLL COM under Visual J++ with the help of com.ms.com.Dispatch. But I have to use Forte4Java to write my Java program, therefore, it will be great if I can still use com.ms.com.* under Forte4Java. Is it possible? If so, how to do it? Please advise and thanks in advance...
Tracy

You can use any java package if you just add it to the classpath. In Forte this means adding it to the explorer pane, I am not sure about Builder.
The problem will be when you try to run it. Any Microsoft class which uses some part of their runtime will require the Microsoft VM. If you have that, and are willing to be permenantly tied to it, then you will be in business.

How I can use Visual Studio 2013 to create lists or libraries via remote?

Hello guys,
I use visual studio on my machine and try to create a list, but the sharepoint server is on another machine. It is possible to run a program on my computer and then create a list on the sharepoint server. If yes, how can I achieve this?
Best regards
Matthias

You can create and manage lists and libraries using SharePoint Designer. To use Visual Studio you would have to create a SharePoint project, create a feature, define the list, etc. then create a Solution package and deploy that to the server. If you just
want to manually add a list then use Designer.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Using visual library in java applet

Hi,
I try to develop an web application which is use the java applet. So, I just want to ask, is it possible to use the netbeans visual library in the java applet? If not, which library must be used this kind of appliacation and what is the efficent developmen environment (netbeans, java studio creator ?)
best regards,
Ufuk Utku Turuncoglu
ITU, Informatics Institute
HPC Lab

Add org-netbeans-api-visual.jar into your jar/classpath and you should be
OK assuming your Applet is signed/jar packed, you will have to jump through
some hoops to get rg-netbeans-api-visual.jar accessible from your main
jar.
Namely....
class YourClass
void copyResourceFromJarToExtDir(String tResource)
InputStream dllInputStream = getClass().getClassLoader().getResourceAsStream(tResource);
fileSeparator = System.getProperty("file.separator").charAt(0);
String extDir = System.getProperty("java.home")+fileSeparator+"lib"+fileSeparator+"ext";
File outFile = null;
   try
      BufferedInputStream binStream = new BufferedInputStream(dllInputStream);
      outFile = new File(extDir+fileSeparator+tResource);
      BufferedOutputStream boutStream = new BufferedOutputStream(new FileOutputStream(outFile));
      System.out.println("saveing to"+outFile.toString());
      int b = -1;
      while((b = binStream.read()) != -1)
         boutStream.write(b);
      binStream.close();
      binStream.close();
      boutStream.flush();
      boutStream.close();
   catch(Exception e)
       e.printStackTrace();
}To summarize pack the rg-netbeans-api-visual.jar into your Applets main jar and call copyResourceFromJarToExtDir("rg-netbeans-api-visual.jar");
In your Applet.init() and you will be able to access the rg-netbeans-api-visual.jar
directly.
Good Luck!
(T)

Finding Memory leaks in C using Visual Studio 2013

I am using Visual Studio 2013, and taking a course in C programming and we started
talking about memory bugs detaction, in particular memory leaks, and how to detect them using Valgrind on Linux.
I want to know if there is a way to detect such memory leaks using VS 2013. I tried searching online but it just leads to lots of articles and blogs and msdn posts and blogs with lots of words like dump files, and analyzing them, etc which is weird
because:
1) It sounds so complex, convoluted and unintuitive it is actually hard to comprehend it.
2) The main reason this is weird is due to the fact that VS is the most advanced IDE around and Microsoft spends so much money on in, yet from what I have read it seems that there is no simple way to use VS to detect memory leaks
- certainly no way that's as simple as Valgrind where I only have to compile the program and run the command valgrind -leaks-check=yes ProgramName
and it simply prints to me all location it thinks there is a memory leak and describes the error (like not freeing memory after allocating it with malloc hence having "dead" memory after the program finishes, or accessing memory that's out of
the array bounds)
So my question is how to use VS 2013 in order to achieve the same results and to find out First in high level if there are memory leaks in the program, and Second - to detect in a simple manner where those leaks are- preferably without involving dump files
(not that I know how to use them anyway in VS).

Hi MicrosoftLaw,
Thanks for your post.
Based on your issue, if you want to check if there are memory leaks in the C program from this VS2013. I suggest you could try to find Memory Leaks Using the CRT Library, for more information:
https://msdn.microsoft.com/en-us/library/x98tx3cf.aspx?f=255&MSPPError=-2147217396
In addition, I find a similar thread about this issue, please you refer the Dusty's suggestion to check this issue.
http://stackoverflow.com/questions/45627/how-do-you-detect-avoid-memory-leaks-in-your-unmanaged-code
I did some research about this issue, I found that the Visual Leak Detector extension tool is a free, robust, open-source memory leak detection system for Visual C++. So if possible, I suggest you could try to use the Visual Leak Detector extension
tool to find the memory leak for Visual C/ C++ program.
https://visualstudiogallery.msdn.microsoft.com/7c40a5d8-dd35-4019-a2af-cb1403f5939c
However, if you have any issue about how to use this Visual Leak Detector extension tool to find the memory leak for C program. I suggest you could directly to write a review to this REVIEW tab in Visual Leak Detector site.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to use shortcut keys in VC apps???

I'm really struggling to understand whether or not it is possible to use shortcut keys (via keyboard) instead of the mouse (Click on an action button) for user actions to be submitted within a Visual Composer model I have created. I'd apprecaite your help on this. Thanks in advance

Hi,
there are no shortcut keys available in Visual Composer. You can not define an event onkey... as you may know from other development environments like .NET and so on. But I think this is ok, because VC is a tool for BPX. It should be simple for BPX, because they aren't developers. When I think about Web Dynpro there are also no shortcut available only onEnter e.g. for a input field. So when you need shortcuts I think you have to use another environment as I mentioned like .NET.
I think this isn't the answer you wanted to hear, but I'm sorry this isn't possible.
Best Regards,
Marcel

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

How to get string value from database table using Visual Studio 2005?

Hi,
Im developing plugin in illustrator cs3 using visual studio 2005. I need to get the values eneterd in database. Im able to get the integer values. But while getting string values it is returning empty value.
Im using the below code to get the values from database table
bool Table::Get(char* FieldName,int& FieldValue)
    try
        _variant_t vtValue;
        vtValue = m_Rec->Fields->GetItem(FieldName)->GetValue();
        FieldValue=vtValue.intVal;
    CATCHERRGET
    sprintf(m_ErrStr,"Success");
    return 1;
Im using the below code to get the values.
AIErr getProjects()
    char buf[5000];
    int i;
    std::string catName;
    ::CoInitialize(NULL);
    Database db;
    Table tbl;
    errno_t err;
    err = fopen(&file,"c:\\DBResult.txt","w");
    fprintf(file, "Before Connection Established\n");
    //MessageBox(NULL,CnnStr,"Connection String",0);
    if(!db.Open(g->username,g->password,CnnStr))
        db.GetErrorErrStr(ErrStr);
        fprintf(file,"Error: %s\n",ErrStr);
    fprintf(file, "After Connection Established\n");
if(!db.Execute("select ProjectID,ProjectName from projectsample",tbl))
        db.GetErrorErrStr(ErrStr);
        fprintf(file,"Error: %s\n",ErrStr);
    int ProjectID;
    int UserID;
    int ProjectTitle;
    char ProjectName[ProjectNameSize];
    if(!tbl.ISEOF())
        tbl.MoveFirst();
    ProjectArrCnt=0;
    for(i=0;i<128;i++)
        buf[i]='\0';
        int j=0;
    while(!tbl.ISEOF())
        if(tbl.Get("ProjectID",ProjectID))
            fprintf(file,"Project ID: %d ",ProjectID);
            ProjectInfo[ProjectArrCnt].ProjectID = ProjectID;
            sprintf(buf,"%d",ProjectID);
            //MessageBox(NULL, buf,"f ID", 0);
            j++;
        else
            tbl.GetErrorErrStr(ErrStr);
            fprintf(file,"Error: %s\n",ErrStr);
            break;
        //if(tbl.Get("ProjectTitle",ProjectName))
        if(tbl.Get("ProjectName",ProjectName))
            MessageBox(NULL,"Inside","",0);
            fprintf(file,"ProjectTitle: %s\n",ProjectName);
            //catName=CategoryName;
            ProjectInfo[ProjectArrCnt].ProjectName=ProjectName;
            //sprintf(buf,"%s",ProjectName);
            MessageBox(NULL,(LPCSTR)ProjectName,"",0);
        else
            tbl.GetErrorErrStr(ErrStr);
            fprintf(file,"Error: %s\n",ErrStr);
            break;
        ProjectArrCnt++;
        //MessageBox(NULL, "While", "WIN API Test",0);
        tbl.MoveNext();
    //MessageBox(NULL, ProjectInfo[i].ProjectName.c_str(),"f Name", 0);
    ::CoUninitialize();
    //sprintf(buf,"%s",file);
    //MessageBox(NULL,buf,"File",0);
    fprintf(file, "Connection closed\n");
    fclose(file);
    for(i=0;i<ProjectArrCnt;i++)
        sprintf(buf,"%i",ProjectInfo[i].ProjectID);
        //MessageBox(NULL,buf,"Proj ID",0);
        //MessageBox(NULL,ProjectInfo[i].ProjectName.c_str(),"Project Name",0);
    return 0;
In the above code im geeting project D which is an integer value. But not able to get the project name.
Please some one guide me.

As I said in the other thread, this really isn't the place to ask questions about a database API unrelated to the Illustrator SDK. You're far more like to find people familliar with your problem on a forum that is dedicated to answering those kinds of questions instead.

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Is it possible to use Visual C 6.0 only to simulate a temperatur​e of a room?

Similar Messages

Maybe you are looking for

Is it possible to use Visual C 6.0 only to simulate a temperature of a room?