Is not recognized as an & I alreadyset the path.

PLEASE SOMEBODY HELP!!!
I trYd to compile a *.java file in prompt and I gEt
"Javac" is not recognized as an internal or external command, operable in a program or batch file
Then I set my PATH and I got the same. after that I tried with
C:\java_probando>C:\Program Files\Java\jdk1.5.0_14\bin\javac MyProgram.java
and I got
"C:\Program" is not recognized as an internal or external command, operable in a program or batch file
then I thied with:
C:\java_probando>C:\ProgramFiles\Java\jdk1.5.0_14\bin\javac MyProgram.java
and I get: the system cannot find the path specified
PLEASE SOMEBODY HELP MY. I REALLY WANT TO LEARN JAVA BUT I CAN?T COMPILE YET!!!!!!!

Caps lock will get you nowhere. However, meaningful subject titles will.
I think you're either trying to putting the info in your path incorrectly, or you have the wrong path altogether.
First off, the following line should be appended to your path it seems, and nothing more:
C:\ProgramFiles\Java\jdk1.5.0_14\bin
no ">" or prompts or anything else. It's hard to tell from your post if you were actually putting that in your path or not, so I'll assume you were, and say start there. Make sure to restart your command console if you're in windows, otherwise the changes to path won't mean a heck of a lot at all.
At this point, you should be able to just type in "javac" at a prompt and see if it actually recognizes it. If it doesn't, then you have the path to javac incorrect, and you need to look at where the javac program actually resides, and fix the entry in your path.

Similar Messages

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My computer is not recognizing my ipod shuffle. The computer says to use the ipod reset utility. When I tried doing this it told me that it was for a 32 bit version which I obviously do not have. My computer is only a few months old. What do I do now?

My computer is not recognizing my ipod shuffle. The computer says to use the ipod reset utility. When I did that it came up with another message that it was only good for a 32 bit version. I guess I do not have a 32 bit version. I just purchased my computer a few months ago and it uses the windows 7 operating system. What do I do now?

Not sure if this helps:-
The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work. Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple Store and explain that they were gifted to you and ask how you can use them. The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

You are not recognized as a user in the SAP customer notification system

Hello,
we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.).
When I want to sned notification for our customers to OSS but with component of our customer(he has another SAP number, his instalation) then I got an error message
You are not recognized as a user in the SAP customer notification system:
You are not recognized as a user in the SAP customer notification system
Message no. DNO158
Diagnosis
No address data exists for this logon user in the SAP problem notification system.
The function you activated could not be executed.
Activated function Diagnosis
Send notification to SAP The notification was saved, but could
not be sent to SAP.
Update notification at SAP The notification was not updated to
reflect the SAP version.
Check for changes The system cannot compare the notification
with the current version at SAP.
Request list of the The notifications that you sent to SAP
notifications contained cannot be updated.
in the SAP problem notification system.
Procedure
Contact your system administrators.
Could you help me please?
view V_AISAPCUSTNOS ist filled with our customer numbers, I am in AISUSER...
Thanks Miloslav Pudil

Hello Miloslav,
We have the same problem.
Somebody knows how can we resolve this?
Thanks,
Diego.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

I have iphoto 6 and my pictures are no longer showing. I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

I have iphoto 6 and my pictures are no longer showing. I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

How did you rebuild?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

After installing 11.2.2.3 iPod Classc. is wiped/"dead" (not recognized by iTunes, Win7 find the unit in explorer) and my iPod Touch refuse to comm with iPod interface in the car. Just wait for a iTunes update?

Hi,
I installed 11.2.2.3 2 days ago and have since then not been able to sync my iPod Classic (not recognized by iTunes anymore and alll data has been wiped but show up in Win explorer when in Disk mode with my label on it "Nik's iPod") my old iPod Touch appear to have all data left but doesn't communicate with my car anymore.
Nedless to say none of the other Apple devices in our house will be updated or connected until this is resolved.
Is this related to the iTunes update?
If so should I just wait for a new update to come out that can help me get these things sorted?
I have tried most of the different remedies listed in this forum to no avail and being computer illiterate (not comepletely but anyway) I just want to know if this is a known problem that I can successfully fix with a bit of fiddling or if its time to seek out a genius bar somewhere and get some help.
Nik

Hi Jeff,
Thanks for the help but I am unfortunately still not able to get my iPod Classic to connect. I have tried all the tricks in the article that you linked to.
One thing is that when I reset the iPod (menu and center until the logo pops up) I get a critical error in iTunes and it shuts down. Could that indicate that my problem is with the iTunes installation rather than the iPod?
I have tried to re-install iTunes before but maybe I shpuld give it a go again?
Brgds,
Nik

Ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod, ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod

I can not connect my Ipod touch to my computer. it's not recognized anymore. It beeps when I plug it into the USB but doesnt charge,
or anything. It's not recognized on MyComputer anywhere, I cant sync...nothing.. I went through everything on the Itunes page under diagnostics, but
still nothing.

Did you reinstall itunes, using a new download from the Apple homepage?
Is your ipod showing in the system profiler/ usb highspeed ports?
Did you already reset the ipod by holding the sleep and home button until the Apple logo comes up?
Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808

FaceTime not recognizing wi-fi but all the rest of the apps are connected. Please help

My FaceTime in my new itouch4 is not recognizing or is not connecting to wi-fi when I try to log inn but all the others applications in the same device are connected. I tried the same account in different device, ipad2 and it connects without problem. What could be wrong?

Does the iOS device connect to other networks successfully?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the future, saying " i've tried everything" provides us with zero information as to what you did try.

HT1567 My computer is not recognizing my iPod NanoPod - therefore the 'Devices' is not showing up on the Left side in order to sync Playlists to my Nano Pod? What can I do about this please?

Hi
My computer is not recognizing my iPod NanoPod - and as a result 'The Devices' section is not showing up in order to sync new Playlists to my Nano-Pod. Any suggestions?
Thank you.

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I recently updated to IOS 7 for my iphone 4s and I am now having issues downloading pictures to my PC through the camera wizard. It is not recognizing my Iphone to download the photos. Please help.

I am running a windows PC with XP and now can't get my pictures off my device.
Please help.

Hello there, Catpkt.
The following Knowledge Base article offers some great in-depth steps to troubleshoot your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

JSPM is not lauching. Error: cannot find the path specified

Hi experts,
I'm on windows 2003. I'm not able to launch JSPM where I want to apply latest sp-stakcs. I'm able to use visual admin. I'm using j2sdk1.4.2_15 which located on c drive. My Java_home env for user and system setup like this: JAVA_HOME
C:\J2SDK....1.4.2_15\BIN.
When I go to \usr\sap\SID\JC02\j2ee\JSPM> bo.bat , I always get the following error:
C:\use\sap\sid\jc02\j2ee\JSPM>go.bat
The system cannot find the path specified.
ERROR: could not update JSPM
Pres any key to continue . . . .
I have administrative permission, infact, I have full permission over usr\sap.... etc...
Please need help ASAP..
Your input is really important and appreciated.
Thanks,
Points will be given for sure.

When you run the go.bat it tries to run java
Go to that directory and try to issue java -version and see if you get an error.
If you do, correct your JAVA_HOME statment in your environment variables and/or add the java directory to your path.
That should do it.
Lee

Every time I am asked for my Apple password, I put it in and then it is not recognized. When I answer the security question, I am told it is wrong. I reset the password, try again, and we start all over again. Not recognized.

How can I get Apple to recognize me? Every time I try to put in my Apple password, it doesn't recognize it. I try answering the security question, will not recognize it. I end up changing the password then try signing in again and it won't recognize it. We start all over again.

Have you changed the email address associated with the Apple ID? I did, and learned the hard way that it caused a lot of problems. I had to delete that ID and create a new one, then it caused problems with iCloud because of my old email address. If that's not the case, you might need to set up a new Apple ID altogether. Sounds like a pain, but it's not too hard, and you only need to create a new email address. You can also set up new security questions for the new ID and it should be recognized when you enter the information in iTunes, the App Store, etc. If that doesn't work, I recommend calling Apple and explaining the situation. Here's the page for Apple support numbers depending on where you live:
http://support.apple.com/kb/he57
Hope this helps.

Prores files not recognized... most of the time [message -- file '[file name].mov' cannot be imported – this 'MooV' file is damaged or unsupported.]

Running AE CC 13.2 on iMac with Yosemite 10.10.2
I just started getting an error message when trying to import any number of ProRes 422 (HQ) files.
file ‘[file name].mov’ cannot be imported – this ‘MooV’ file is damaged or unsupported.
This happens approximately 90% of the time. There have been occasions where I can open and view files of this type.
I have gone through the various troubleshooting options here:
http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html
I reinstalled ProApps to no avail.
Permissions are fine.
Creative Cloud recently updated AE over the past few days. Perhaps this incremental update fouled something up? Last weekend, things worked perfectly fine.
I have also noticed that it takes a lot longer to load AE (since using last weekend). I have used Time Machine to roll the application back to last week's version to see if that helps.
Any insight is appreciated.

The update last week was just to Adobe Camera RAW and not really AE. It would be unlikely to cause the issues you describe. Have you tried turning your Mac all the way off and then back on again?

Is not recognized as an & I alreadyset the path.

Similar Messages

Maybe you are looking for