Is possible to load a hierarchy from web services?

Hi Experts,
I have a doubt, exists some way to load a hierarchy of a infoobject from a system source that is a Web Services? Somebody I could do this? It would give a guide me of steps to do...
Thanks & Regards,
Leonel

Usually web service datasources load into a PSA. and hierarchies are loaded using IDoc. You could however load the data from the web service into another infoobject / DSO and create a custom hierarchy datasource . The procedure for the same - I came across something like this in ABAP for BW ( SAP Press ) ... do not have it now but it can be done...

Similar Messages

Don't show data from web service to Cross-Tab in xcelsius

Hi all visitors
I have created one web service and my web service will show data like this.
Group ___Floor ____Amount
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 2__2200000
Member__Floor 1__     1000000
Member__Floor 1__     1000000
In my xcelsius, i have option to make it to cross-tab.
when i use that data( data above by manual) to excel spreadsheet. The data will change to
Group______________Floor1________________Floor2______________GrandTotal
Member____________5000000_____________ 3200000_____________8200000
GrandTotal__________5000000_____________ 3200000_____________8200000
But when i load the data from web service,It doesn't show anything.
(when i use list view to show data from web server, i see all data)
How can i load data from web service and show the data like manually?
Best Regards,

Hi Tony,
As per your example i have used the SUMIF fucntion
have a glance at that and let me know if you need help
Data coming from webservice >>     Concat     Group     Floor     Amount
                                          =C7&D7     Member     Floor1     1000000
                                          =C8&D8     Member     Floor2     1000000
                                          =C9&D9     Member     Floor1     1000000
                                          =C10&D10     Member     Floor2     1000000
                                           =C11&D11     Member     Floor2     2200000
                                           =C12&D12     Member     Floor1     1000000
                                          =C13&D13     Member     Floor1     1000000
Cross Tab >>Group     Floor1                                                                    Floor2
      Member     =SUMIF($B$7:$B$13,$H$7&I6,$E$7:$E$13)     =SUMIF($B$7:$B$13,$H$7&J6,$E$7:$E$13)
     Grand Total     =SUM(I7)                                                                     =SUM(J7)
Original data after
Group     Floor1     Floor2
Member     4,000,000     4,200,000
Grand Total     4,000,000     4,200,000
Hope this may solve your issue.
Ley me know if you have any other issues.
Regards,
AnjaniKumar C.A.

Error while loading the Hierarchy from R/3 to BI.

Dear all ,
I am trying to load a hierarchy FROM R/3 to BI . When I am executing the Info package its showing an below Error.
Hierarchy object is u201CWBS elementu201D
The level of the node ID 01494179 does not suit the lev. of the higher lev. node
The level of the node ID 01494178 does not suit the lev. of the higher lev. node
The level of the node ID 01493822 does not suit the lev. of the higher lev. node
Could you please let me know what would be the reasonu2026u2026?
Regards,
Raghu

Hi
looks like there is some inconsistency in hierchy data you are tring to laod.
Check hierarchy in r3 if its ok, if yes try deleting complete hierarchy and reloading it.
You may also chose to adjust it manually
Regards
Sudeep

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

This is correct.
Ipad wilol sync itunes content and pics with one and only one computer at a time. Syncing to another will erase the current content.

Is it possible to dwnload a file from web with given URL into our local sap

Hi every Body!
Is it possible to download a file from web with given URL into local PC with abap.
thanks
vikram.c

hi
good
go through this link, i hope this ll help you solve your problem
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f5d3c40a-0801-0010-55b7-9e3b01745a40
thanks
mrutyun^

Could not load servlet information from web server

I am trying to register a servlet through the web object manager.
As soon as click the web object manager menu pick I get the following
error: Could not load servlet information from web server.
On other peoples machines here it works fine and they can register
servlets. What am I missing!

You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.

Loading JDO in a web service endpoint

I have a web service endpoint (Java class exposed as a web service) I'm developing in NW04-sp9, and I'm having trouble getting access to JDO in my web service. I have an object class I'd like to persist using JDO, and I've developed them and run the build helper utility to make them persistable. I believe that this works, because I can look at the .class file in a text editor and see references to javax/jdo/spi/PersistenceCapable.
In my WSE, I try to get the default PersistenceManagerFactory doing a JNDI lookup with:
_pmf=(PersistenceManagerFactory)ctx.lookup("java:comp/env/jdo/defaultPMF");
which fails with a NamingException. Based on another forum posting, I tried:
_pmf=(PersistenceManagerFactory)ctx.lookup("deployedAdapters/jdo/defaultPMF/shareable/jdo/defaultPMF");
Which actually seems to work, but when I do this, I get a NoClassDefFoundError on javax/jdo/PersistenceManagerFactory from the web service endpoint.
I have added the com.sap.jdo application to my WSE's application-j2ee-engine.xml file, as described in the JDO chapter of the NW04 documentation.
Any clues what I'm missing?
Thanks,
- Bill

>
> I will check if it is possible to declare resource
> references for web services and tell you.
>
Thanks very much
>
> By the way, I have just found out that one can lookup
> JCA connection factories in the global JNDI context
> without having to declare resource references. I
> don't like this. In my opinion, applications should
> never access the global JNDI context directly, but
> only the local java:comp/env context.
>
> You can find the JDO PMF at the following location in
> the global JNDI context:
>
> deployedAdapters/jdo/defaultPMF/shareable/jdo/default
> PMF
>
I did this (see my initial post), and I agree that it's a bad idea. I didn't have much choice, though When I did this, and I tried to cast the returned object to a PersistenceManagerFactory, I received a NoClassDefFoundError, which led me to believe that the JDO classes were not loaded into the web service container. This is what led me down the resource reference path.
>
> I don't know when this deployedAdapters directory was
> introduced, but I can imagine why. Most likely, there
> are runtime environments like Web Dynpro or Web
> Services where one needs to access JCA adapters, but
> where resource references are not available.
>
Thanks again,
- Bill

Calling portal service from web service

Hello,
I'm trying to call portal service from web service. Is this possible? I'm getting an error.
For example, code:
IJCOClientService clientService = (IJCOClientService) PortalRuntime.getRuntimeResources().getService(IJCOClientService.KEY);
.. is generating exception:
java.lang.LinkageError: Class com/sapportals/portal/prt/runtime/IPortalRuntimeResources violates loader constraints
Do anybody knows what's wrong?
Best regards,
Josef Motl

Hi Josef,
Is the IJCOClientService located on the producer side or on the consumer side?
Amit

Itunes was unable to load provider data from sync services. Reconnect or try later

Hi everyone
This issue has got me stumped.
I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
I used to be able to sync now I cannot bakup or sync.
The device is an iphone 4s with the latest software IOS 5.1.
Itunes is version 10.6.0.40, the latest.
To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
Also searche the web high and low and tried several different advice from people.
This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
Please help someone!
Thanks and regards
Alfred

Did you have a look ath this (rather) long thread about it?
https://discussions.apple.com/message/17214161#17214161 , for example:
danielfromkongsvinger
Re: Unable to load provider data from Sync Services
16.12.2011 20:21 (in response to wisniak)
"I then followed a tip found in PCWorld and performed the following:
1. Make sure iTunes isn't running.
2. Click Start, type regedit, then press Enter.
3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
5. Start iTunes. The offending message should be gone!"
This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

Create a schema from web service in eclipse

Hi all,
I'm trying to export some data out of SF to an 3rd party via a web service. In the webUI I have the possibility(Attachment 1) to create a schema from web service so my outgoing file matches the requirements. In Eclipse I cannot find that option and I'm encoutering some errors (attachement 2).
Can anyone tell me if there is a possibility like the web UI in eclipse?
Thanks in advance.

Hi,
You can create a portal service which can access KM to create a folder and then expose this portal service as Web Services.
To know more:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/cb213e578c0262e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/sdn/thread?threadID=324931
To know the api to create folder in your service method, check this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0ab890-0201-0010-849d-98d70bd1d5f0
Some code:
IResourceContext context = new ResourceContext(user);
ICollection parent = (ICollection) ResourceFactory.getInstance()
.getResource(″/documents″, context);
IResource resource = parent.createResource(″file″, null, null);
ICollection collection = parent.createCollection(″folder″, null);
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

ITunes was unable to load provider data from Sync Services. Reconnect or try again later

i just had this message for the fist time when trying to sync my iphone 4: "iTunes was unable to load provider data from Sync Services. Reconnect or try again later"
what i did is that:
- i unplugged my iphone 4
- clicked on "edit" in itunes, "Preferences", "devices", "reset synck history"
- Uninstalled itunes
- restarted the lap top
- reinstalled itunes
then i tired and the iphone synced fine. i tried it a few times and it was fine.
but i have 2 questions:
1- could this be cause by excessive syncing, since i do sync my phone almost twice a week.
2- is what i did good enough for a solution or do i need to rename folders and resort to the other solutions provided?

OK
Here's what I did:
1. Copy all of the contents in C:\Program Files\Common Files\Apple\Apple Application Support to C:\Program Files\Common Files\Apple\Mobile Device Support folder, overwriting anything it if asked.
2. Rright-click on the Computer icon on your desktop (or in the start menu) and select Properties. Click on Advanced System Settings. Then clik on Environment Variables. If you don't have a user variable called PATH, click New... and add it, or select it and click Edit...
Now, add to the beginning of the user PATH the following two directories:
c:\program files\commmon files\apple\Apple Application Support
c:\program files\commmon files\apple\Mobile Device Support
Be sure to put a semi-colon (;) between the two directories.
Click OK three times to save your settings.
Step #2 might require a reboot.
After these 2 steps sync works again (touch wood).
Seems that sometimes there's an additional possibility (which I didn't perform):
If you are still having problems after following these steps, it's possible another application uses one of the same DLLs as iTunes (but a different version) and Windows is finding it in the PATH before the Apple file paths added above. You can check this by opening a DOS command prompt window and executing the following commands:
where libxml2.dll
where sqlite3.dll
where libtidy.dll
Examine the pathnames listed by these commands. If any paths are listed before the ...\Common Files\Apple\... paths, you'll want to remove those paths from the PATH environment variable.

Extraction from web service without XI

Hello all!
I want to realize data extraction scheme without usage XI
DB2 Stored proc -> Web Service -> BW
Is realy?

Hello can you refine your question with more specification?
Yes, it can possible data extraction from web service, but what you are exactly looking for?

How to create a proxy to retrieve the xml file from web services

Hi Every one,
We have a requirment where we receive a xml file from Kenexa, a third party HR tool using a middleware tool. from SAP side We have to create a proxy to retrieve the xml file from web services by initiating call through middleware tool i used earlier.
these are the steps i intend to follow to accomlish the requirement.
1) middleware tool has to initiate the call to kenexa web services to receive the xml file when it is available.
2) On SAP we need to create a ABAP Proxy service provider to middleware where this file can be received.
Can any one guide me how i can create a proxy to retrieve the xml file from web services by initiating call through other middlewre (its not PI).
Any help would be really great, i am not a ABAP developer, so please help me with this. Thanks.

Thank for reply.
The computers are in different locations, but yes it's possible, the users in this enviroment are all local administrator of the machines, and we can distribute the script centrally from the DC automatically
Acrobat use Java, right? I'm not so expert in java, but something about it could not be so difficult to manage.
Do you know some place where i can get some info about JS and acrobat?

Help! "iTunes was unable to load dataclass information from Sync Services."

Help! what to do? When you connect iphone, the program writes this message "iTunes was unable to load dataclass information from Sync Services."

It could be possible the service is disables. Go into control panel of your pc, into administrative services, then click in services. There you will see a list of services. Find the apple and itunes services. See if they say disabled. If they do, right click on it, then another dialogue pops up. It will stay stopped. Scroll in there and put automatic. Then hit apply. Then click on start. It will then apply the service and you should be able to connect your ipod.
Have you registered this other ipod for iTunes on your pc?

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix?

Is possible to load a hierarchy from web services?

Similar Messages

Maybe you are looking for