Is Possible to Monitor Network Printers using OEM

Hi All,
Is it possible to monitor Network printers status using Oracle Grid Control, please let me know if it possible.
Thanks in advance..
YJR

The certification matrix for OEM GC: Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocTitle=Oracle%20Enterprise%20Manager%20Grid%20Control%20Certification%20Checker&viewingMode=1143&bmDocDsrc=KB&bmDocType=REFERENCE&bmDocID=412431.1&from=BOOKMARK))
Regards
Rob

Similar Messages

Is it possible to change instance and use OEM ?

We have 4 single DB instance in same oracle 11gr2 server on win2008R2.
We will not use grid control because of lack of time, knowledge and customer approval.
Is it possible to change instance and use OEM by changing ORACLE_UNQNAME variable or in any way ?

840105 wrote:
IF what EdStevens said is true,
WHat environmental variable ,or othe settings shoud I set to start 4 different dbconsole and access those OEM in same server ?
"IF" what I said is true???
The same environment variables you set to start the database itself .....
Here's the environment with no oracle-specific settings:
oracle:$ env | grep ORA | sort
PS1=\n\u:$ORACLE_SID$
Now we set the environment for database 'orcl'
oracle:$ . oraenv
ORACLE_SID = [oracle] ? orcl
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1 is /u01/app/oracle
Now the environment looks like this:
oracle:orcl$ env | grep ORA | sort
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_SID=orcl
PS1=\n\u:$ORACLE_SID$
Start the dbcontrol
oracle:orcl$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vblnxsrv01.vbdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ........................... started.
If Oracle would only provide documentation ... oh, wait!
Getting Started with Database Administration
Managing Oracle Enterprise Manager Database Control

Oracle VM Monitoring Using OEM

Hi,
We need to monitor Oracle VM using OEM, we have Oracle VM setup with Two Guest servers (Linux and Windows 2003 server).
we have OEM 10.2.0.5.0 setup, and enabled Oracle VM Management Packeage also.
Could you please help someone, how to configure and monitor Oracle VM using OEM.

Hi vdosi,
Thanks for ur promy reply....
am just confusing abt this configaration....first we need to register virtual server in OEM console or create virtual server pool....but while registering Virtual server
it telling "You are not yet licensed to use the Oracle VM Management Pack. If you like this functionality, please see your super administrator about obtaining a license"
In our Oracle VM server, we are created Two Guest server (Windows 2003, RHEL 4)..Now we need to monitor Oracle VM and two guest servers....How can do this...if it possible...can u send me the document......please help me on this.....
thanks in advance..
Jayaram

Using OEM for Database Detection

Hi. I'd like to monitor my database using OEM without any 3rd party S/W. Has anyone done this? If so, can you share some of the techniques how exactly to do it.
Thanks.

Hi
You can use OEM(Oracle Enterprise Manager) for monitor your database
Thanks and regards
Sarju Patel
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Caesar Hermogeno ([email protected]):
Hi. I'd like to monitor my database using OEM without any 3rd party S/W. Has anyone done this? If so, can you share some of the techniques how exactly to do it.
Thanks.<HR></BLOCKQUOTE>
null

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

Monitoring WCI 10.3.0 & UCM 10.1.3.5 using OEM 11g R1

As part of the Service Monitoring for our OFM-OUCM environment, we have implemented OEM 11g R1. Our Dev/Test/UAT/Prod environment is comprised of SOA 10.1.3.5, WCI 10.3, UCM 10.1.3.5, multiple DB instances 10.2.0.3/10.2.0.4, IDM 10.1.4.0.1. We are able to monitor SOA 10.1.3.5, IDM 10.1.4.0.1 & the databases. But the 11g Agent wasnt able to discover the targets for WCI 10.3.0 & UCM 10.1.3.5. Is there a way to monitor UCM 10gR3 & WCI 10.3 using OEM 11g R1 or do we need to downgrade the OEM version.
We are able to see the WCI Products in the Hosts -> Configuration tab in OEM. But we are not able to monitor these as targets.
WebCenter Interaction API Service 10.3.0.0.0
WebCenter Interaction Automation Service 10.3.0.0.0
WebCenter Interaction Content Upload Service 10.3.0.0.0
WebCenter Interaction Directory 1.0.0.0.0
WebCenter Interaction Document Repository Service 10.3.0.0.0
WebCenter Interaction Identity Service for LDAP 10.3.0.0.0
WebCenter Interaction Image Service 10.3.0.0.0
WebCenter Interaction Notification Service 1.0.0.0.0
WebCenter Interaction Portal 10.3.0.0.0
WebCenter Interaction Remote Portlet Service 1.0.0.0.0
Thanks

Did you check http://www.oracle.com/us/products/enterprise-manager/039537.pdf ?
and http://www.oracle.com/technetwork/oem/soa-mgmt/index.html
MANAGEMENT PACK FOR WEBCENTER SUITE
Regards
Rob
http://oemgc.wordpress.com

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

Is it possible to monitor State change of a .CSV file using powershell scripting ?

Hi All,
I just would like to know Is it possible to monitor State change of a .CSV file using powershell scripting ? We have SCOM tool which has that capability but there are some drawbacks in that for which we are not able to utilise that. So i would like
to know is this possible using powershell.
So if there is any number above 303 in the .CSV file then i need a email alert / notification for the same.
Gautam.75801

Hi Jrv,
Thank you very much. I modified the above and it worked.
Import-Csv C:\SCOM_Tasks\GCC2010Capacitymanagement\CapacityMgntData.csv | ?{$_.Mailboxes -gt 303} | Export-csv -path C:\SCOM_Tasks\Mbx_Above303.csv;
Send-MailMessage -Attachments "C:\SCOM_Tasks\Mbx_Above303.csv" -To “[email protected]" -From “abc@xyz" -SMTPServer [email protected] -Subject “Mailboxex are above 303 in Exchange databases” -Body “Mailboxex are above 303 in Exchange databases"
Mailboxex - is the line which i want to monitor if the values there are above 303. And it will extract the lines with all above 303 to another CSV file and 2nd is a mail script to email me the same with the attachment of the 2nd extract.
Gautam.75801

Using OEM to monitor Data Guard database

Can someone please send me the link or docs of how to use OEM monitoring data guard? In specific, I would like to use OEM to monitor and be sure logs are applying to stand by site.
Any ideas?

Hello ,
I will extend the document on the Fast Failover feature one of these days.
What you need to do is:
For using Fast Failover, you need to configure the Data Guard observer process.
The configuration of this process can be done by selecting the Fast-Start Failover Disabled link on the Data Guard page of the database (Primary or Standby).
You will be automatically redirected to the Fast-Start Failover: Configure Page.
From this page you can do the configuration of the DG observer process, that then will enable you to activate the Fast Failover feature.
Regards
Rob
http://oemgc.wordpress.com

Monitor standby database via OEM using non-sysdba account

Hi,
Is it at all possible to monitor a standby database via grid control using non-sysdba account so that targets are seen as up (green arrows visible etc)
We audit sys operations and as the SYS user is the account that currently monitors the standby we are seeing our audit file dest fill too quickly. We need to keep auditing on though.
I would like to do this using dbsnmp, though are there any roles or specific privs that need to be granted to do this? so far i am unable to do this.
Would welcome any advice on this one.
Thanks,
firefly.

Thanks for reply robert.
we are using active for one standby but not using active for 2 other standby db's.
I just wondered what the SYSDBA priv used (what actual priv etc) to be able to monitor standby dbs effectively, whereas non-SYSDBA accounts are unable to.
Thanks,
firefly

How i use OEM 12c to monitor Microsoft Active directory.

Hi,
How i use OEM 12c to monitor Microsoft Active directory.Please assist me on this.
Thanks,
Sagar

Hi,
The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
Don't forget that you have to manually replicate all IPS configuration every time you make a change.
HTH
Andrew.

Is it possible access to dashboards by using network users insted of obiee

Hi,
can anybody have idea about this
is it possible access to dashboard by using network users.insted of obiee users.i.ewhen you are login into presentation services it will ask user name and password. in this case it will not like that when we are log in to the sysytem by using user name and password.by using that user name and password it can directly access to the dashboard is it possible or not?means that by using network username and password can i able to login to the dashboard by cliking the presentation url.with out asking username and password again.
please help me
thanking you

Yes, you can and if your presentation services are hosted on a windows server, thats lot more easy. While the presentation server is being promoted, you can have users get authenticated using LDAP/AD and that way, you need not go through typing username/pwd once again.
Configure SSO
Set IIS authentication to “Windows authentication”:
Open IIS Manager => Select Default website => Right-click => Properties => Directory Security tab => Authentication and access contol => Edit … => deselect “Enable anonymous access” => Select “Integrated Windows authentication” => Ok => Ok => Select All => Ok
Open the instanceconfig.xml file (located in OracleBIData\web\config). Set <SSO enabled = “true”>. Save and close file.
Restart your server and start your OBIEE services.. You are good to go now.
Like others said, may be you are better off with closing your questions so others can use it.

Is it possible to monitor more than one target/Host with one agent in OEM 12c?

Hi,
Is it possible to monitor more than one target/Host with one agent in OEM 12c? Please assist me on this

Since by definition a single EM agent must reside on a single database host, then, no, you can't monitor multiple hosts.
Unless you mean that you want to monitor multiple virtual hosts from a single physical host ... but in that case, you'd still need one host per database host.
That's just the way EM works. Always has, probably always will.

Is it possible to monitor when apps are used? Like say I have skpe and I talk to a friend for over 3 hours, could someone look and see that I did that without having my skype or iphone?

Is it possible to monitor when apps are used and how long they have been used for? Like say I have skpe or oovoo and I talk to a friend for over 3 hours, could someone look and see that I did that and how long I did it for without having my skype or iphone?

We are having an identical issue with Photos. I'm able to add information and keywords when they're in my library, but as soon as I share them, all of that information disappears. I'm hoping it's possible because it's a much nicer way to browse shared photo albums than Dropbox.

How can I share printers using a non apple router, imac to ipad?

Newbie in osx, but experienced in linux.
My new imac has 3 printers setup for sharing, but ipad 2 / iphone 4 fail to see them. I am using the belkin router that I owned already, instead of buying an Airport.
I found a solution at askubuntu.com Q 26130 at http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
I setup a linux machine on the network, with no physical connection to any printer. The 1st, an hp fax psc has a usb to imac, as the 2nd, an hp psc, the 3rd printer is an epson wireless, which is only connected on the network by wifi to the belkin router. I'm certain the imac "sharing" is properly setup, because the linux machine has no trouble finding the printers. Only the ipad / iphone have a problem.
Once I put the linux machine (with the above changes) on the network, everything works as desired. I can print on the ipad / iphone to any of the 3 printers, using the built in Airport printer routine (not the epson or hp apps). And the imax and linux machines can also print on all 3.
So, I suspect the imac isn't telling the router to display the printers on the network in a way that iOS can see them. I know it would work if I owned an Airport, but I'd rather not spend that much right now.
I'm sure someone knowledgable in OSX might have an idea where to stick an Airport definition file, created from the python script in askubuntu, that could solve this without having to run the linux laptop all the time. Any ideas?
TIA

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

Is Possible to Monitor Network Printers using OEM

Similar Messages

Maybe you are looking for