Is the interface of Oracle 10g XE is the same of Oracle 10g or 11g?

Are the interface, functions the same?
I am wondering after I practice performing DBA tasks using 10g XE.
How much do I know about the real Oracle?
Thanks.

Hi,
If you will perform the tasks by SqlPlus(the command line), it will be almost the same as 10g other edtions.
If you are saying by visual tools, XE is using a apex based administration tool for basic management, other edtions are using Enterpirse Manager Database Control or Grid Control, more powerful than XE's , and EM is not available for XE.
You also can download a version of any other Edtion of 10g or 11g, you can use it for study purpose, free of charge. but no offical support.
Or, you even can buy a personal edtion of 10g or 11g, and you can have support.
Peter

Similar Messages

  • Configure OSB 11g to use the same domain as SOA Suite 11g

    Hi,
    A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
    I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
    After SOA suite install , I Configure Oracle SOA Suite by following the below path
    Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
    I have seen another path to configure soa suite from oracle doc
    SOA_ORACLE_HOME\common\bin\config.cmd
    eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
    both directory str are correct?
    After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
    <Middleware_Home>\oracle_common\common\bin\config.bat.
    eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
    Thanks in advance
    jk

    Eventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
    Regards,
    Anuj

  • Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

    Hi everyone,
    I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
    The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
    Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
    Thanks

    duplicate
    Re: Oracle Forms 10G not working as Oracle Forms 6i

  • Oracle dbms_xmldom.ISNULL what's the difference in 10G and 11G?

    For the code below, in Oracle 10g, it says the node is empty, in 11g, it's not empty. There is a newline character in side the tag .
    If there is a space inside, the result is the same for both version.
    Once nothing inside, both two version will not have the output.
    Why does this happen ?
    DECLARE
    v_doc dbms_xmldom.DOMDocument;
    v_elem dbms_xmldom.DOMElement;
    v_nelem dbms_xmldom.DOMNode;
    BEGIN
    -- create the DOMDocument
    v_doc := dbms_xmldom.newDOMDocument(xmlType('<XMLDATA>
    </XMLDATA>'));
    v_nelem := DBMS_XMLDOM.MAKENODE(v_doc);
    v_nelem := DBMS_XSLPROCESSOR.SELECTSINGLENODE(v_nelem,'XMLDATA/text()');
    IF NOT(dbms_xmldom.ISNULL(v_nelem)) THEN
    DBMS_OUTPUT.PUT_LINE('The node is not empty');
    END IF;
    END;
    Edited by: 972302 on Nov 20, 2012 10:35 AM

    Post exact version numbers. I can't reproduce it:
    SQL> select  *
      2    from  v$version
      3  /
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    PL/SQL Release 10.2.0.5.0 - Production
    CORE    10.2.0.5.0      Production
    TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
    NLSRTL Version 10.2.0.5.0 - Production
    SQL> DECLARE
      2  v_doc dbms_xmldom.DOMDocument;
      3  v_elem dbms_xmldom.DOMElement;
      4  v_nelem dbms_xmldom.DOMNode;
      5  BEGIN
      6  -- create the DOMDocument
      7  v_doc := dbms_xmldom.newDOMDocument(xmlType('<XMLDATA>
      8  </XMLDATA>'));
      9  v_nelem := DBMS_XMLDOM.MAKENODE(v_doc);
    10  v_nelem := DBMS_XSLPROCESSOR.SELECTSINGLENODE(v_nelem,'XMLDATA/text()');
    11  IF NOT(dbms_xmldom.ISNULL(v_nelem)) THEN
    12  DBMS_OUTPUT.PUT_LINE('The node is not empty');
    13  END IF;
    14  END;
    15  /
    The node is not empty
    PL/SQL procedure successfully completed.
    SQL> 
    SQL> select  *
      2    from  v$version
      3  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE    11.2.0.3.0      Production
    TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    SQL> DECLARE
      2  v_doc dbms_xmldom.DOMDocument;
      3  v_elem dbms_xmldom.DOMElement;
      4  v_nelem dbms_xmldom.DOMNode;
      5  BEGIN
      6  -- create the DOMDocument
      7  v_doc := dbms_xmldom.newDOMDocument(xmlType('<XMLDATA>
      8  </XMLDATA>'));
      9  v_nelem := DBMS_XMLDOM.MAKENODE(v_doc);
    10  v_nelem := DBMS_XSLPROCESSOR.SELECTSINGLENODE(v_nelem,'XMLDATA/text()');
    11  IF NOT(dbms_xmldom.ISNULL(v_nelem)) THEN
    12  DBMS_OUTPUT.PUT_LINE('The node is not empty');
    13  END IF;
    14  END;
    15  /
    The node is not empty
    PL/SQL procedure successfully completed.
    SQL> SY.

  • How to run the same instance of oracle 10g on another computer

    hello everyone sorry for my ignorance. I have downloaded oracle 10g express edition on 2 computers however when i login using sql developer i get two different instances of oracle databases. What file do i need to change on one of the computers so that when i log in through sql developer im always on the same database. Is there are tns.ora file that i need to make the same on my other machine? Any help would be appreciated.

    user633029 wrote:
    I have downloaded oracle 10g express edition on 2 computers however when i login using sql developer i get two different instances of oracle databases. What file do i need to change on one of the computers so that when i log in through sql developer im always on the same database.Hi!
    I'm not sure does I understand your requirement good?
    But if so:
    You have 2 computers and from both you want to access one single Oracle database.
    If this correct then you need only on one machine to install XE Server and on another machine ONLY XE Client.
    After that you need to copy tnsnames.ora file from computer where XE server resides to according directory where XE client resides.
    HTH

  • In oracle 10g is the same Oracle Net Listener than...?

    Hi forum members again I'm vey new in oracle server10g, this time I have a doubt about oracle components , that is the same the Oracle Net Listner than the Oracle SQL*Net listener, if is not the same, please tell me the diference
    Thanks in advance

    SQL*Net has gone through a few minor revisions over the years.. We've seen SQL*Net Version 1, SQL*Net V2, Net8, Oracle Networking and now (in 10g) Oracle Net Services.
    It's exactly the same, only different.
    Not surprisingly, Oracle actually documents the differences in their documentation which is freely available for all to read.
    If you want some information about what's new in Oracle Networking, I encourage you to read the introduction section of the "Oracle® Database Net Services Administrator's Guide (10g Release 2 (10.2))" titled "What's New in Oracle Net Services?"
    Reading that will not only give you a better understanding, but also justify the jobs of the technical writers who create over 55,000 pages of information for our use. <g>

  • Can we install Oracle 8i and 10g on the same windows server?

    I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
    Forgive me if this question is already asked.
    Thanks in advance!
    Jay.

    WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
    For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

  • Using Oracle 9i Client and 10g Server on the same box

    Hi,
    All our applications are compiled using oracle 9i and the proc compiler for oracle 9i.
    However we run the applications against a 10g database which has oracle9i and 10g co-hosted on the same both. We achieve this by using the oracle 9 libclntsh.so shared library which uses shared memory (I assume) rather than having a listener and tnsnames.ora entry.
    My question is, is it support by oracle.
    Thanks,
    Iain

    You can achieve this by install them into different ORACLE_HOME

  • Installing oracle 10g and 11g client  on the same Linux RHEL 5.4 host

    Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?

    Thanks for your reply.
    Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
    How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
    ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1

  • Oracle 10g and 11g on the same computer....

    Hi ,
    Just for confirmation.... i 'd like to ask if this is possible.....without migrating the existing Oracle 10g v.2 database to Oracle 11g......
    I want to keep them working both (not of course simultaneously.....)
    Thanks....
    Sim

    Assuming you load everything into separate 10.2 and 11.1 Oracle Homes, sure. You can even have both running at the same time if you'd like.
    Depending on your setup, you may want to spend a bit of time figuring out whether you want to run separate listeners or have one listener for both databases (in which case you'd probably want just the 11g listener running). And whether you want separate tnsnames.ora files or whether you want to use the TNS_ADMIN environment variable to point both Oracle Homes at a single file.
    Justin

  • Installing Both Oracle 10g and oracleXE on the same computer

    Hi,
    Good Morning to ALL,
    Can any of you tell me whether we can Install both the Oracle10g Version and OracleXE on the same computer. In my work computer, I have oracle and Toad installed. Now I wanna install OracleXE and Oracle SQL Developer to do some hands on practise when I find time at work.
    Could we Install both these versions on the same computer? Your answer will help me a lot. Please advice............
    Thanks a lot.............. Have a good day.

    Yes, you can. On my laptop, in a virtual machine with Oracle Linux 5, I have 10g, 11g and XE.
    BTW, 11g includes Sql Developer by default...

  • Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

    Hi Deepak/Folks,
    Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
    Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
    SAP note 1862446 - Inventory
    load failed... OPatch cannot load inventory for the given Oracle Home
    and re-create the oracle  inventory.
    This has also not helped in anyway.
    Is there a solution to this problem.
    Following is the error that I am getting when I try to Install the patches
    Getting pre-run patch inventory...
    Getting pre-run patch inventory...failed.
    Cannot get pre-run patch inventory.
    Refer to log file
      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
    when I open the log file specified here I get the following
    more mopatch-2014_08_06-14-52-51.log
    more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
    MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
    Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
    Version:       2.1.15
    Revision:      5.1.2.26
    Command-line:  /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
    Oracle Home:   /oracle/<SID>/11203
    RDBMS version: 11.2.0.3.0
    OPatch version:11.2.0.3.3
    Clean-up:      supported
    PSUs:          supported
    Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
    Patch base:    .
    Patch source:  SAP11203P_1312-20009978.zip
    Link script:   ./link.mts<SID>ua.sh
    Readmes:       <none>
    Strpd. Readmes:<none>
    make utility:  /usr/ccs/bin/make
    unzip utility: /oracle/<SID>/11203/bin/unzip
    User name:     ora<SID>
    Working dir:   /oracle/stage
    System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
    Disk free:     11734549 KBytes on /oracle/<SID>
    Disk required: 886496 KBytes on /oracle/<SID>
    Getting pre-run patch inventory...
    executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
    ========================================================
    GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
    ========================================================
    Oracle Interim Patch Installer version 11.2.0.3.3
    Copyright (c) 2012, Oracle Corporation.  All rights reserved.
    Oracle Home       : /oracle/<SID>/11203
    Central Inventory : /oracle/<SID>/oraInventory
       from           : /oracle/<SID>/11203/oraInst.loc
    OPatch version    : 11.2.0.3.3
    OUI version       : 11.2.0.3.0
    Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
    List of Homes on this system:
    Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
    Possible causes are:
       Oracle Home dir. path does not exist in Central Inventory
       Oracle Home is a symbolic link
       Oracle Home inventory is corrupted
    LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
    OPatch failed with error code 73
    Getting pre-run patch inventory...failed.
    Cannot get pre-run patch inventory.  Exiting.
    I would appreciate if you folks can help me out on this
    Thanks
    APS

    FOLLOW UP QUESTION BRANCHED:
    Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

  • Oracle 10g to 11g Upgrade - Oracle Clusterware problem

    Oracle10g RAC (2 Nodes) RHEL 4 64bit
    Hi All,
    I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kept pushing through the install and after I ran the last rootupgrade script on node 2 it gave me the following error:
    Checking the existence of nodeapps on this node
    Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    Creating '/crs/home/install/paramfile.crs' with data used for CRS configuration
    Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    Failed to retrieve VIP details
    Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    Failed to retrieve VIP details
    Setting CRS configuration values in /crs/home/install/paramfile.crs
    So I ignored the error for the time being and after that I checked the status of crs and it gave me the following:
    [oracle@vtl-rac2 crsd]$ crsstatus
    HA Resource Target State
    ora.VMRACDEV.VMRACDEV1.inst ONLINE ONLINE on vtl-rac1
    ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
    ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
    ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
    ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
    ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
    ora.vtl-rac1.ons ONLINE OFFLINE
    ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
    ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
    ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
    ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
    ora.vtl-rac2.ons ONLINE OFFLINE
    ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
    So i tried to bring it back up by doing a crs_stop -all and crs_start -all and it gave me the following error:
    vtl-rac1 : CRS-1019: Resource ora.vtl-rac2.ons (application) cannot run on vtl-rac1
    Start of `ora.vtl-rac1.ons` on member `vtl-rac1` failed.
    vtl-rac2 : CRS-1019: Resource ora.vtl-rac1.ons (application) cannot run on vtl-rac2
    CRS-0223: Resource 'ora.VMRACDEV.db' has placement error.
    CRS-0215: Could not start resource 'ora.vtl-rac1.ons'.
    CRS-0215: Could not start resource 'ora.vtl-rac2.ons'.
    I am thinking that all of this is caused by the various issues I had with the install. If I am incorrect, then please let me know. If it is true, I would like to know if there are any 11g docs on how to clean up a failed clusterware upgrade. Any advice would be greatly appreciated on any of the situations I am having.
    Thank you

    Hi Chandra,
    Did CVU report any problems before the upgrade?No, there were no errors reported by CVU before the upgrade.
    I don't there is note out there for cleaning 11g CRS
    install...and I think can very use the 10g CRS note -
    239998.1.Yeah I might have to go that way.
    I have both the 11g CRS install and upgrade from 10g
    to 11CRS at
    http://chandradba.blogspot.com/2007/08/oracle-11g-rac-
    install-on-red-hat-50.html
    and
    http://chandradba.blogspot.com/2008/02/oracle-10g-crs-
    upgrade-to-11g-crs.html
    see if it helps.Yup, your guide is very simple, clear and error proof :) That's how mine when pretty much except right around 75% I started getting these strange errors of files not being able to be transferred to node 2. Anyways, it shouldn't be a problem as none of those errors were configuration related...or else I would have a messed up cluster.
    Well, I actually rebooted both machines and now the whole CRS stack is up!! So I guess I am ok. We'll just have to wait and see.
    Thanks for your help Chandra...I always appreciate it.

  • .Database upgrade from 10g to 11g in Oracle EBS 11i

    Hi,
    An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
    from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
    is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
    Thanks and Regards
    Edited by: 918308 on May 10, 2013 7:52 PM

    918308 wrote:
    Hi,
    Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
    You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
    Thanks,
    Hussein

  • Need help in writing test cases while upgradin oracle from 10g to 11g

    hi all
    I want to write test cases for ugrading oracle 10g to 11g i have some idea but want your input.and at the same time some people taking upgrade testing as to ensure that everything works after the upgrade - stremas, jobs, procedures.but i think as 11g is backward compatible all the things should work properly.If not then how can we write a test cases for that,your help is most welcome.
    Thanks in advance

    Hi;
    Please see below notes which could give you some idea to create your test case. By the way if your components are certified wiht 11g so there should be any bad issue for your upgrade
    Minimizing Downtime During Production Upgrade [ID 478308.1]
    Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
    Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
    Please check my blog
    http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
    In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
    Regard
    Helios

Maybe you are looking for

  • Rezound hangs up call when I try to get screen to turn on while in call

    I am having a couple of issues that are really driving me nuts on my phone. The number 1 issue and it became an issue with the ICS upgrade is that when I am in a call, my screen goes dark, like normal, however I cannot for the life of me get back to

  • MySQL - Connection Pooling - Driver?

    Hi there! I am looking for a JDBC 2.0 compatible driver to use with MySQL. I would like to use connection pooling in a webapplication (JSP:s and Servlets) but I have just found out that the driver I usually use mmmysql do not support connection pooli

  • Using Control Reference to change subVI control - sub VI also called using a container

    Hello I am in need to update a control inside a sub VI that is also called inside a container in the main VI. Please see the project attached. My goal is simple - Change the "Main VI calling sub VI-Container.vi " panel's "FGV state" once the state ch

  • Regarding description of Infoobjects in Reports

    Hai I created the InfoObjects by giving the Length and its description . But when I create the Reports then I didn’t get the description of InfoObjects Fully . Why it is like that and what I have to do ??? Is there any limit for textual description o

  • Illustrator file compatibility

    Hi   I'm new to Adobe Illustrator CS6 and finding it really good to use. I have come up against a problem though. I find that when I open up my file in Photoshop CS6 to airbrush part of the front cover design for my book I then loose all capability t