Is the parameter : rdisp/bctime in the instance profile?

Is the parameter:rdisp/btctime in instance profile? I can not find it in the instance profile. if it is not writed in the instnace profile, is the default value 60 seconds?
thanks
Edited by: victor on Sep 10, 2008 4:30 AM

Hi Victor,
not all parameters you will find in the instance profile.Some default ones and maintained ones can be seen.if it is not there you can manually add it in t-code rz10.
Have a look at below link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c4/3a6247505211d189550000e829fbbd/frameset.htm
Regards
Ashok

Similar Messages

Setting the parameter DIR_ORAHOME for a Dialog Instance

I have been advised by the SAP GoLiveCheck to set the parameter DIR_ORAHOME for my dialog instances. The Oracle home is currently on the central instance at G:\oracle\SID\102. What must the path for the parameter DIR_ORAHOME be set to on the dialog instance? (central_host\.....???))
Help.
Scott

Hello Scott,
>> What must the path for the parameter DIR_ORAHOME be set to on the dialog instance?
The paraemeter must be the same as on the database server itself. Set the DIR_ORAHOME in the default profile.. that is the way we do it.
For example: /oracle/<SID>/102_64
Regards
Stefan

In which folder can I find the abap instance profile?

Hi,
In which folder can I find the abap instance profile?
This is the parameter that I want to change:
"profile parameter em/address_space_MB = 250 in the instance profile"
Greets
Stefan

Hi Michal,
my actual problom is, that during the Java-Add-In-Installation an error appears. (CJS-20057)
j2ee-engine (dvebmgs00) do not start during this installation.
I also change the value of max. heap size and try a rebase as it is shown in note 129813.
nothing chances.
this error appears all the time.
can anybody help me please?
Thanks.
Greets
Stefan

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

The parameter name [...] in the query's selection criteria does not match..

Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)

Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to     @Id
    @Column(name="departmentID", nullable = false)
    private Integer departmentID;or change Employees' ManytoOne annotation to:
    @ManyToOne
    @JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
    private Departments departments;Best Regards,
Chris

How to get the User entered value in the Submit request form for a parameter of a concurrent program in Oracle applications.

Hi All,
I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field . i want to get that string.
Thanks a lot in advance for your time and help.
- Vijay

Hi All,
I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field . i want to get that string.
Thanks a lot in advance for your time and help.
- Vijay

How to retrieve the parameter names from a JSP page ? Urgent Please

Hello,
Can anybody tell me how to retrieve the parameter names from the JSP
page. (without using getParameterNames() method.)
The problem with the getParameterNames() method is I get the Jumbled output.
I need it very badly
With regards
Ananth R
email:[email protected]
[email protected]

Dear duffymo,
My primary intention is to convert the JSP form information into a XML file.
If I do not get the Parameter names in the correct order how can I maintain
tag order in XML file.
For ex: (JSP PAGE VIEW)
Name--
FirstName
MiddleName
LastName
Address--
Street1
Street2
City
Country
&so on
(XML File to be generated)
<Name>
<FirstName>Value</FirstName>
</Name>
<Address>
<street1>value</street1>
</Address>
& so on
If I use getParameterNames() to get all the parameter names(Which form the tag names in the XML file ) the Enumeration object it returns will not be in the same order as the text fields in JSP.From this I can not construct a meaningful XML file.
order means: Order of entry on the page, from top to bottom
That's it
Waiting for your responses

One section of one web site gives "The parameter is incorrect" only after I log into the site and only a blank screen?

"The parameter is incorrect" is the error msg. on a blank screen when I log in to a particular web site.
Of many tabs at the site only one gives this error.
Without logging in I can navigate as I desire.
I access this site on a daily basis. Using Safari is no problem at all.
FF 16.0.2 on a mac 10.6.8 this also occurred before upgrade to 16.0.2
I have not applied any bells or whistles to FF . . to my knowledge.
Bob

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

How can i sort F4 by the data in the parameter ?

i create parameter "p_budat" .
now i wont to display in the F4 just relevant data for the user date .
for example if the user enter "13.03.2006" ,
just relevant data for this date will show up .
the problem is , when i going to the :
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_budat
the parameter "p_budat" is empty the date that i enter is not there .
also i want to use function : F4_ZAHLLAUF
is it possible to make sort there ?

hi,
chk this sample code.
<i>how to use dynamic f4 help?</i>
tables: mara, makt.
data: begin of itab occurs 0,
matnr like mara-matnr,
end of itab.
data : begin of btab occurs 0,
maktx like makt-maktx,
end of btab.
data mak like makt-maktx.
DATA : return like ddshretval occurs 0 with header line.
data: begin of dynpfields occurs 0.
include structure dynpread.
data: end of dynpfields.
parameters: p_matnr like mara-matnr,
p_maktx like makt-maktx.
Initialization.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
REFRESH ITAB.
SELECT matnr FROM mara INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR '
dynprofield = 'P_MATNR '
dynpprog = sy-REPID
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
select single maktx from makt into mak where matnr = return-fieldval.
p_matnr = return-fieldval.
refresh return.
clear return.
move 'P_MAKTX' to dynpfields-fieldname.
move mak to dynpfields-fieldvalue.
append dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname               = sy-cprog
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      OTHERS               = 8.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh return.
clear return.
Regards
Anver

Multiple Label fields within the Parameter List of Available Values

Hi,
I have a business requirement where this is a period number which will be a value filed within a parameter. The labels of the parameter need to be the start date of the period and the end date of the period. What is the best way implement this in SSRS please?
Since SSRS seems to be limited to one label field. My best quess at a solution is to concatinate the start and end period into a single field then expose this as the label.
Is this the best approach to take?
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

You need to modify the dataset to concatenate start and end periods to get new field which can be used as your label field.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Error in displaying the parameter

Hi Experts,
I have a parameter of type char128 which is usedfor a filepath. but in the parameter if we enter the data which is more than 45 length. It is displaying only 45 charecters length when I saw in debugging mode the value is upto 45 charecters only. Please help me in getting the total value.
Is their any restriction on length of parameter value. Please suggest.

Hi,
for this use this function module.so that it can display it full.
PARAMETER P_FILE LIKE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.

Runtime parameter rdisp/max_wprun_time is set to 1700

u201CCaller 70u201D missing error. This is happening because the runtime parameter rdisp/max_wprun_time is set to 1700. If I edit it to 15000 temporarily and re run the load, the load is successful.
this is popping up at the point of updating data targets, in the 1st set of data package while the second loads successfully.
Krishna.

The runtime parameter rdisp/max_wprun_time defines the time limit for a foreground process. While backgound processes are permitted to run with out any limit. With this parameter the foreground/dialog processes are permitted to run for the defined amount of time, beyond this the system will cancel them terming it as time limit exceeded error.
The standard defined by SAP for this parameter is 3600, but depending on our business need we can increase or decrease this value. Usually taken care by Basis Administrators.
Regards,
Habeeb

Lock table size change in instance profile RZ10

i need your help. I changed the table size from 10000 to 17000 and then to 20000 but still have the same table size as before.i used rz10 to change the parameter enque/table_size.
the steps i followed are as in all documents i can find.
1. change parameter value
2. save it (parameter and instance)
3. activate it.
4.on restart instance (i just left it for the offline backup to do this).
on the 4th step is that enough, because after the system came back i checked the parameter in rz11 and the current value on the parameter is still 10000. (owner entries and granule still 12557 as before)
am i missing something?
vinaka
epeli

Hi,
it COULD be that the offline backup did indeed no restart of the instance. From Oracle I know that there is a so called "reconnect-status" where the SAP instance is trying over a defined period of time to log to the database again after the workprocesses lost connection to the database processes. In this timeframe the instance is not to be considered as restarted.
If you check ST02 you see the point of time where the instance was restarted in reality the last time. If this date is before your offline backup you need to do the restart manually.
Best regards, Alexander

DEFAULT, STARTand INSTANCE Profile

Hi everybody
What are the differences between START INSTANCE AND DEFAULT Profiles.
What are the jobs these profiles are doing?
plz in detail
Regards,
Siva

Hi Siva,
Start Profile
When you start an SAP instance on a host, the start profile defines which SAP services are started (message server, dialog, gateway or enqueue process.
Default Profile
If you want to assign the same parameter value for all application servers (such as the name of the database host, or the host on which the message server is running), enter it in the default profile. In general, you can list any parameter you like here.
Instance Profile
Instance profiles provide an application server with additional configuration parameters to complement the settings values from the default profile. Typically, these parameter settings adapt the instance according to the desired resources. They also define the available instance resources (main memory, shared memory, roll memory and so on), and how to allocate memory to the SAP application buffers.
refer to the following link for more details
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a610f505211d189550000e829fbbd/frameset.htm
Thanks
Pankaj

Determine/read the value of parameter rdisp/max_wprun_time within ABAP

Hi,
I need to avoid program breaks caused by exceeding run time longer than defined in parameter rdisp/max_wprun_time.
I will check the time since start of report in the critcal loop to bring the current data changes to a controlled end before getting a program break. I won't put a constant to the report, I will have a dynamical routine to avoid changes of report if the value of parameter rdisp/max_wprun_time will be changed.
But how can I get the value of this parameter within my ABAP report? Is there a table where this value has been stored? Is there an existing function module or a method to read the value?
Thank's a lot in advance!
Georg

The runtime parameter (GET RUN TIME ) can be used to dynamically get the program run time
DATA T TYPE I.
GET RUN TIME FIELD T.
WRITE: / 'Runtime', T.
or
U probably can store the start date and time in TVARV with some variable ( line concatenate program name + START Date + Time)
and then use
SD_DATETIME_DIFFERENCE
or
SD_CALC_DURATION_FROM_DATETIME
Regards,
Mithun Shetty

Is the parameter : rdisp/bctime in the instance profile?

Similar Messages

Maybe you are looking for