Is their any function module to see the details of employee ?

Hello ,
Is their any function module through which we can see the details of employee
ASAP
SANDEEP JADHAV

BAPI_EMPLOYEE_GETLIST
BAPI_EMPLOYEE_GETDATA
BAPI_PERSDATA_GETDETAIL: Read personal data
BAPI_PERSDATA_GETDETAILEDLIST: Read instances with data
BAPI_PERSDATA_GETLIST: Read instances

Similar Messages

Is their any function module for deleting condition record i am trying

Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....

Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure

Is there any function module to get the variables used in a query?

Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
Luis

Hi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis

Is there any function module to convert the date format

Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
       I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.

hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*"       IMPORTING
*"             VALUE(DATE) LIKE SY-DATUM
*"       EXPORTING
*"             VALUE(FORMATTED_DATE)
*"       EXCEPTIONS
*"              INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
        YYYY(4) TYPE C,
        MM(2) TYPE C,
        DD(2) TYPE C,
      END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
    DATE = DATE
EXCEPTIONS
    PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas

Any function module to change the mode in Planning board

Hi guys,
Is there any function module to change the mode in Planning board?
I would like to call a custom screen to to chagne the mode since the strandard function cannot show enough info.
Thanks.

Thanks Bhanu for ur quick reply.
Is that enough to change the technical name in the table RSZCOMPDIR.
Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
Eg.
Change all the technical name of queries ZQSAP to ZQXYZ.
If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables.

Any Function module to find the vendor description

Any Function module to find the vendor description.
Regards
Paul

Hi,
Do you mean that you need the name and address details of the Vendor. you can get it in table LFA1.
regards,
Mahesh

Is there any function module to Change the System Status

Dear ABAPers,
I am working in the Customer Service Module.I want to change the System status.
Is there any function module to change the System Status.
Thanks & Regards,
Ashok.

Hi Ashok
Service Order status update function module ?
How to set the system status
Check above threads,
Regards,
Syf

Any Function Module For getting Shipment Details

Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Raju

hi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ

Any function module to translate the text

Hi all,
I have a requirement like, in the report i have to display the headings according to languages chosen
dynamically.
let me know is there is any process or Function module to translate the texts.
Regards,
Madhavi

Hi,
you can use SE63 for translating
or use
FM 'TRANSLATE_TEXT_TEXTLOG'.
And also 'SKTZ_TRANSLATE_TEXT_TEXTLOG'
Regards,
Flavya

Is there any function module to get the purchase order conditions from EONP

Hi,
I want to get the EONP and EONH table details for the purchase orders with the help of function module. Can anyone tell me any function module name which would give me those details.
Thanks,
Atanu

Hi
Check with BAPI function module BAPI_PO_GETDETAIL and BAPI_PO_GETDETAIL1.
Regards
Srilaxmi

Function module to get the details from table COEP

hi all,
I have to select the data from COEP table based on OBJNR.i don't have any other key information.so i have to select the data based on OBJNR only.
can any one please tell me is there any function to get the data from this table.
Thanks.

Hi
Try the fun module
K_CO_OBJECT_BALANCE_GET
see the sample select statement for COEP
clear cobrb_tab.
refresh cobrb_tab.
select objnr            " Object No
         rec_objnr1       " Ref Object No
         bureg            " Dostribution Rule
         lfdnr            " Sequence No
         perbz            " Settlement Rule
         konty            " Acct Assign Category
         bukrs            " Company Code
         kostl            " Cost Center
     into table cobrb_tab
     from cobrb
     where kostl in rn_kostl.
sort cobrb_tab by objnr rec_objnr1.
delete adjacent duplicates from cobrb_tab comparing objnr.
Get the Settlement Costs from COEP Table
clear it_set_tab.
refresh it_set_tab.
if not cobrb_tab[] is initial.
    select kokrs            " Controlling Area
           belnr            " Acc Document
           buzei            " Line Item
           perio            " Period Block
           wkgbtr           " Value in CO Curr
           lednr            " Ledger No
           objnr            " Object No
           gjahr            " Fiscal Year
           wrttp            " Actuals
           versn            " Version
           kstar            " Cost Element
           beknz            " Dr/Cr Indicator
           parob1           " Partner Object
       into table it_set_tab
       from coep
       for all entries in cobrb_tab
       where lednr = c_lednr and
             wrttp = c_wrttp2 and
             versn = c_versn and
             gjahr = p_gjahr and
             objnr = cobrb_tab-objnr and
             parob1 = cobrb_tab-rec_objnr1 and
             beknz in (c_o, c_a).
endif.
Reward points for useful Answers
Regards
Anji

Function module to get the details (WTGBTR) from table COEP

Hi all,
I have to select the data from COEP table based on OBJNR, KSTAR and KOKRS.I want WTGBTR from COEP Table.
Right now Iam using select query.But i want to use function module.
Can any one please tell me is there any function module to get WTGBTR from COEP table.
Thanks.

This'll work:
SELECT objnr bukrs wtgbtr
INTO CORRESPONDING FIELDS OF TABLE gt_coep
FROM coep
WHERE lednr = '00'                               "<========
    and kokrs = '1000'
    AND kstar IN ('0000810001' , '0000830001')
    AND objnr IN s_objnr
    AND bukrs IN s_bukrs.
Rob

Is there any function module to get the no. of days in a month?

hi all,
if i have the month and year then is there any FM by which i can get the no. of dayz in that month?
regards,
shweta upadhyay.

Hi swetha,
i have written my own function module,may be it helps u.
""Local interface:
*" IMPORTING
*"     VALUE(DAY_IN) LIKE SY-DATUM
*" EXPORTING
*"     VALUE(FIRST_DAY_OF_MONTH) LIKE SY-DATUM
*"     VALUE(LAST_DAY_OF_MONTH) LIKE SY-DATUM
*"     VALUE(NUMBER_OF_DAYS) TYPE I
*" EXCEPTIONS
*"      DAY_IN_NO_DATE
DATA: BEGIN OF DATE,
          J(4),
          M(2),
          T(2),
        END OF DATE.
DATA: ZAHL TYPE I.
DATA: DAYS_SUBTRACT TYPE I.
DATA: XDATUM TYPE D.
XDATUM = DAY_IN.
XDATUM+6(2) = '01'.
XDATUM = XDATUM + 35.
XDATUM+6(2) = '01'. XDATUM = XDATUM - 1.
NUMBER_OF_DAYS = XDATUM+6(2).
DATE = DAY_IN.
IF DATE-M LT JANUARY OR DATE-M GT DECEMBER.
    raise DAY_IN_NO_DATE.
ENDIF.
IF DATE-J LT LOWDATE.
    raise DAY_IN_NO_DATE.
ENDIF.
IF DATE-J EQ HIGHDATE-J AND
     DATE-M EQ HIGHDATE-M.
    LAST_DAY_OF_MONTH = HIGHDATE.
ELSE.
    IF DATE-M EQ DECEMBER.
      ZAHL = DATE-J + 1.
      UNPACK ZAHL TO DATE-J.
      DATE-M = FRIST.
      DAYS_SUBTRACT =   NUMBER_OF_DAYS - 1.
    ELSE.
      ZAHL = DATE-M + 1.
      UNPACK ZAHL TO DATE-M.
      DAYS_SUBTRACT =   NUMBER_OF_DAYS - 0.
    ENDIF.
First of the subsequent month
    DATE-T = FRIST.
    LAST_DAY_OF_MONTH = DATE.
    FIRST_DAY_OF_MONTH = DATE.
    SUBTRACT 1 FROM LAST_DAY_OF_MONTH.
    SUBTRACT DAYS_SUBTRACT FROM FIRST_DAY_OF_MONTH.
ENDIF.
ENDFUNCTION.
regards,
nagaraj

Is there any Function Module will give the Transactional data of a cube?

Hi Experts,
I have one Infocube Zco3_BILT , I need to write a routine (BADI Program)on top of this info cube to fetch a characterstic value in the infocube.
F table & Etable wont give any characterstic values.
Is There any SAP provided FM to give characterstic values of the Infocube.
Thanks in advance.
Regards
Mohan

Hi Mohan,
this is correct since the values are stored in different tables (fact, dimension etc) due to star sheme modelling. As far as I know there is no standard function module for this issue.
However ABAP report RSDD_SHOW_ICUBE might help. This is the report for transaction listcube, all relevant data is build up, there you should find all necessary steps and standard reports/modules to fetch the required characteristic value. Although I do not know the exact requirement you will probably have to work with SID values.
Perhaps this will help resolving your issue.
Best Regards,
Marcel

Is there any function module to get the data from st06?

Hi,
I'm new to this forum.
I would like to know if there is a way (maybe some function modules) to collect information like system architecture, and databases as displayed in transaction st06?
I would like to call it from external program in order to view part of the data available in st06.
Thanks,
Erez Gordon.

have a look at function group SMON.
Not sure if these are remote enabled, otherwise create a wrapper function module (RFC).
Edited by: Micky Oestreich on Dec 11, 2008 9:37 AM

Is their any function module to see the details of employee ?

Similar Messages

Maybe you are looking for