Is there a Dedicated Volume for both ringer and mu...
I'm unalbe to find this option, but on ios, i was able to have seperate volumes for my ringer and music or media. I could have my music volume set high, while incoming allerts such as calls or messages set to a lower volume. Are these options available on the lumia 920?
Lumia 920
Seroius flaw....makes me wonder if software designers ever use these phones.
Why in the Hell can't I set the ringer colume, speaker phone volume, key touch volume, etc. separately?
-Wife goes thry the roof when I dial a call with the volume on 15.....they key touch tone should be able to be set independently.
-Key click when entering text....I want to hear it, but I don't want to bother everyone around me with hearing it.
I shouldn't have to reset the volume 4x to text, make a call, switch to speaker
Get your **bleep** together!
Similar Messages
-
Is there a partition scheme for both powerpc and intel-based macs?
I need to partition a drive to back up using time machine from two different Macs: one is powerpc and one is intel but disk utility seems to only allow you to choose on or the other.
this is the disk utility option:
Select a new partition scheme:
* Use Apple Partition Map partition scheme if the disk will be used with Time Machine and a PowerPC-based Mac.
* Use GUID partition scheme if the disk will be used with Time Machine and a Intel-based Mac.silvrmn wrote:
unfortunately i am alternating them between computers.
is there a way to make it work or is the only solution to get two different drives and format them accordingly?
TM will most likely work fine with both computers if you partition the drive GUID. that's been the experience of most people who do it. but apple does recommend partitioning the TM drive GUID for backing up intel macs and APM for PPC ones.
using GUID is unlikely to create problems but it may.
but if you want safety on this you'll need two separate drives. -
Since subscribing to iTunes match my ipad2 no longer offers the AirPlay option on the volume bar within Music, rendering my bowers Wilkins speakers useless for both iTunes and spotify. Why is this and how can I fix it?
Apple made no mention of this being an expected issue, so I can only assume it's unintentional. Otherwise I wouldn't have subscribed to Match in the first place!How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.
How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality. -
I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.
thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?
-
I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?
Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso -
Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.Welcome to the Apple Community.
-
Since I updated my iphone 4 software from 4.3.3/4.3.5 - bought brand new only 2 weeks before the update came out - to iOS 5, my bluetooth no longer works in me ford fiesta and when I ring people, they literally can not hear a word I say. It has nothing to do with poor signal areas as they are the same areas I was in with the same phone before the software update! i have even sent for a replacement phone and received a reconditioned phone (after paying excess charge - JOKE!) and the same problem occured when I updated again. I cannot believe there is no downgrade as this iOS 5 is a shambles and to be honest, I see very little difference in terms of apps and photos so i have no idea why apple are recommending this upgrade!
Is there anything I can do to improve the fact that nobody can hear me on the phone when I speak?!! Or are apple going to insist I keep a phone that is of no use to me if I can't actually use it as a PHONE!
Please please help!Hi,
Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all?? -
Receiving error msg in user's mailbox for both Outbound and Inbound IDocs
Hi,
Whenever specific IDoc (Inbound/Outbound) gets failed then the user/org unit assigned in its partner profile should get those error messages in their inbox.
To achieve this for Inbound Idoc I have performed following set of steps:-
1. Created an object and attached it under IDOCAPPL using 'SWO1' and I have set that object type as 'To imported'.
2. I have assigned that object type to event 'ERRORINPUTOCCURRED' and standard tasks '00008068' (Inbound processing error), '00008074'
(Inbound Syntax error), '20000051' (IDoc Application Inbound error), '300000207' (Error during Inbound processing of SYSTAT01) using transaction 'SWETYPV'.
3. I have created an organisation unit with two positions and different jobs where each job has been assigned to specific tasks. User has also been assigned to specific jobs.
4. At the end of this I have assigned this org. unit to IDoc's partner profile.
But this process does not seem to be working we are not receiving any mail in agent's inbox. If someone has done similar kind of thing in past, please let me know the correct step for both Outbound and Inboud IDoc.
Thanks in advance.
SupriyaHi,
Try this for inbound IDOC
Go to transaction WE42
Give the process code that you gave in the partner profile (WE20)
Select that row and press the details button (F2).
Next to the "Identification" field there will be push button which has the tool tip "ALE table"
Press that button
In the resulting screen..
In the IDOC section..
Give the following..
object type - "new business object that you created"
Start event - INPUTERROROCCURRED
End event - INPUTFINISHED
Hope this works..
Thanks,
Naren -
Using the same client for both regfree and out-of-proc COM
Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
NickTry Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik -
Creating InDesign files for both print and mobile output?
I am looking for a way to create files that can be multi-purpose for both print and mobile/online environments. I would like the output to be 2 different PDFs from one set of Indesign files. The problem I am encountering is that currently my files are full of hi-res and vector graphics, effects, and are generally created to be optimized for large-scale printings on offset or digital presses. I am trying to use the same files to generate files that are optimized for mobile and online presentation but finding that the number of vector graphics specifically is slowing page display down.
My initial reaction is that the solution would have to be dual-development. Multiple forms of 'master graphics' would have to be created and placed on multiple layers (one for print and one for mobile/online).
Hi-res files could be made lo-res in Acrobat or Pitstop, but vector imagery would have to be rasterized and I am not aware of a method to do that in either of those programs.
I have found some info on adobe.com leading me to think that maybe CS6 addresses some of this, but the majority of my work is being done in CS4 with only the bleeding edge being done in CS5.
Thanks in advance for any insight.the output to be 2 different PDFs from one set of Indesign files.
You can accomplish this by saving each PDF using a different preset - High Quality Print for the high res, smallest file size for web
but vector imagery would have to be rasterized...
You should be trying to keep all vector work as vectors. This, in most cases, lowers the file size. There are a couple of exceptions to that like if the vectors are very complex (layered etc) and you are using bitmap effects like drop shadows. In general, rasterizing will increase the file size and lower the quality.
Is there any functional difference between the 2 PDFs? I am wondering why exporting using 2 different presets will not do the job efficiently enough. You could always save your linked images with a low res version - same file but make a copy 100dpi instead of 300dpi. This might help but InD normally downsamples the images anyway when exporting as smallest file size.
EDIT:// In Acrobat, you can save as "Reduced Size PDF" which strips out all the meta data etc and makes the PDF lighter and faster for web use. This would be a final, before publishing online step. -
PGI for both main and sub items (Sales BOM)
Hello SD friends,
I'm trying to map some BOM scenario.
Only main item should be relevant for princing.
Here's what I've done :
1. Create sales BOM via CS01
2. Maintain item category group ERLA for main item and NORM for sub item MM01
3. Maintain item category TAQ for main item and TAE for sub item VOV4
When I wanna do PGI, system creates material document only for main item.
Which means that PGI has not been done for sub items.
Is there any way to make PGI possible for both main and sub items ??
Regards,
Bahia.Can you clear, that why you want to issue both Main item/Sub Item, where your pricing is @ main item level.
in Main item level Pricing, Main item itself includes components. Once you issue the main item. from Inventory this main item wil be reduced.
Eg: In Case of Main Item- Computer (Assume Components - Monitor , Keyboard , CPU & Mouse)
Price for Computer - $1200. Component prices individually- $300 , $100, $700, $100 - These prices applicable only when you sell as BOM at Subitem level Pricing Or Seperately )-
In SO: - Order Computer (System explodes Components to verify,which are the subitems consists in Main Item)
DEL:- Components will be copied in Delivery , but not for dispatch (Sch Line Cat:CT has these controls)
Inv: Only Main item will be displayed for print.
NOTE: for your requirement, you can change the Schline Category from CT - CN- which is relevant for delivery with movement type i601 -in SO. Then you can dispatch components & these components will not copied into Invoice ,as they are not relevant for billing.
If you want CN has to determined automatically, maintain Schline Category determination accordingly.
Hope it helps,
Any info, please revert -
I currently am paying 29 dollars a month for just photoshop.. there is an option for 9.99 a month for both that and lightroom? what is the difference?
This document explains the differences between the Creative Cloud Photography Plan and the Photoshop single app plan - https://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Thanks
Bev -
My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?
Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz
Maybe you are looking for
-
I want to delete my purchased history in the app store..How do i do that?
i recently updated to IOS 7 and don't like how you can see my purchase history in the app store. how can i delete it?
-
Grub doesn't load, goes straight to Vista
I am not new to Arch but have never dual-booted Windows and Linux before. I shrunk Vista to 30 GB (not without hassle, mind you, and many many defrags) and set up Arch on other partitions. This (according to cfdisk) is my current setup: Name Flags Pa
-
OSX Lion & Brother Scanner DSmobile 600 will not install driver
OSX Lion 10.7.2 Hardware: Brother DSmobile 600 (USB) Software Driver: DSmobile600_Mac_1_2_4.dmg (OSX 10.6-10.7) Scanner driver does not install - Scanner does not work Procedure Launch the Brother installer - goes through install procedure - forces
-
Hello, There is a object that composed of another object. I don't know if I'm true. In my case there is: Object_1 result = Object_2.getMethod1(parameter); result.getMethod2.getMethod3.get(0).getMethod4();I just want to know how can I extract the valu
-
How to migrate to another computer
I am in the process of getting a newer, more powerful computer. My old computer slows to a near stand still when working on photos with PS6. How do I reinstall it on the new computer?