Is there a limit for the Account Transformation Table?
Hi Gurus,
I am anxious to know is there a limit for the or any particular number for maintaing Account Transformation table. 2) If many rules are existing in the Table, will it cause any performance issue.
Regards,
KumarMG
Hello Kumar,
I endorse the view expressed by Lokesh. Yes, there is no limit to the number of Account Transformation Rules that you can maintain in the Transformation Table. One way to limit this number is to use carefully maintained hierarchies instead of specifying individual accounts in the Rule. However, this is not always possible - but will help limit the number of entries in the Account Transformation Table. To create Cash Flow Satatement, you have to anyway use the Account Transformation Rule and surely this would stretch the number of entries in the table. For a complex requirement, these might extend to a few hundred entries. Performance will be an issue, no doubt.
Chakrapani
Similar Messages
-
Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you
Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space. -
I recently updgraded to the iPhone 5S from the iPhone 5. Prior to using the the 5S i backed up the contents to my 50GB iCloud storage.
Unfortunately I have found that some of my videos were not downloaded to my new phone.
Is there a limit on size that icloud will accept? I have I lost my videos?
Cheers
redman69The number must be stored in some internal structure
like an array. And there's a limit on the size of an
array, because the maximum index you can use is
Integer.MAX_INT. So it follows that there must be a
maximum BigInteger value too.Why can't it be split into 2 arrays when it overflows the first? I don't know the actual implementation, but it could be of relatively unlimited size. -
Is there a size limit for the *.au files to be used in Java applet
Hi,
I wrote an applet to play,loop and stop au files but I couldn't get the sound out of it,it was working fine with a 64 kbyte au file but once I use a 900 kbyte file,it does not work.I was wondering whether is there a limit for the size of the audio file?Thanks
les4kByte file size, 1000 notes max.
-
Is there a limit in the number of user accounts on Mavericks?
Hi
I would like to create a system with a lot of user accounts (+/- 200).
I have two questions:
- Is there a limit in the user accounts on Mavericks? Where can I find more infomation about this?
- Is there a possibility to automatically create a high number of accounts? Or at least some sort of template?
Huge thanks for any help.I don't think that there is a limit.
Are you using OS X Maverics Server?
https://help.apple.com/advancedserveradmin/mac/3.0/#apdDC3BA60F-246B-43E8-AB24-F 6419B32FF6D
In many organizations, a single shared directory domain is adequate. It can handle hundreds of thousands of users and thousands of computers sharing the same resources, such as printer queues, share points for home directories, share points for applications, and share points for documents. -
Is there a limit to the number of devices I can have on one account. I have been putting my kids' ipods on my account so that I can manage their downloads, and control it. Then I just create playlists for them specifically. Now, adding another one for my youngest, but have no idea if there are limits.
Well the part about putting songs in the "iTUnes Music" folder I only brought up because it seemed you liked things very organized. You could use iTunes to so all the organizeing. Plus once you add something to the iTUnes library, if you change ANYTHING about it in windows explorer, like its name, change the name of the folder its in or move it to another folder, iTUnes "Looses Track" of it. Its not like other programs that "Watch" files and folders for changes outside its "iTUnes Music" folder
But to have iTUnes auto search, you have to delete a hidden pref file. After doing this, when you open iTUnes again it will throw up a setup wizard, just like its the first time ever installing it. Its in this wizard where you get your ONLY chance to have iTUnes auto search and add files from the system. Just goto the link below and follow Scott P's steps
http://discussions.apple.com/message.jspa?messageID=607357
Also since your new to the ipod, you my want to check out the "iPod 101" section so you can learn the ropes of everything
http://www.apple.com/support/ipod101/ -
Is there a limit on the size of the input for the Solve Linear Equations block?
Hello,
I'm trying to figure out why the Solve Linear Equations block will properly function with some sets of data and why it won't with others. What my program is doing is taking a signal and comparing it with a batch of sine and cosine waves to try and pick out patterns in the data. I have different sample sizes and it seems to work when I throw 3900 points at it. However, I have another set with 4550 points and it gives me incorrect amplitudes for my sinusoids. Is there some limit to the size of the matrices that I can give this block? Or is there some other workaround that still allows me to keep all of my data?
Thanks,
David JosephWell, the best way to show what I expect is to see the entire program. It's pretty evident that when looking at the graphs, something isn't right. What is supposed to happen is that the runout amplitudes are found, and then those sinusoids are subtracted from the initial data, leaving tooth to tooth data and noise. When I use the larger arrays, it seems as though not all of the data gets through (count the peaks on the product gear runout graph vs. initial) and the amplitudes are much to small, such that nothing is really taken out and the tooth to tooth data looks like the initial data.
Also, we will also be using an FFT, but it will be limited to only determining the frequencies we should check. I've fought with the fft blocks quite a bit and I just prefer to not use them. Plus, the guy I'm writing this for wants exact answers and does not want to pad or resample the data or use windows.
The exact number of data points isn't important (ie. 4550 vs 4551) since I use the array size block to index the for loop.
As for typical values, they can change a lot based on materials. But, the original 3900 data point sets and the 4550 data point sets used practically identical gears. So, use the original 3900 sets I've included as references (check the RO array block numbers to compare).
I've included 3 3900 samples, 3 4550 samples, and 3 4550 samples that have been truncated to 3900 or so as constants on the block diagram.
Also, the check for additional runouts (like 3 per rev, 4 per rev, etc..) is optional, but if you choose to use it, use positive integers only.
I don't know how much of this program will make sense and I have wires running everywhere.. so good luck. Keep in mind I'm only a student and I hadn't touched Labview until about 2 or 3 months ago.
Thanks,
David Joseph
Attachments:
Full example.vi 139 KB -
Is there a storage limit for the files sent?
Is there a storage limit for the files sent? Do I have to delete the files or I can keep them indefinitely? Also, do link to the documents expire for the recipients so they can go back to the email if they forget to download?
4kByte file size, 1000 notes max.
-
Is there a size limit for the txt files to be viewed in the ipod ?
when I pass a text file (.txt) in the notes folder, then I try to see it on my ipod nano, I can see just a part of it, the beginning. Is there a size limit for the .txt files to be viewed in the ipod nano? How to increase it?
4kByte file size, 1000 notes max.
-
I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault. -
Why is there a limit on the number of times a "DVD player region" can be changed, and can this numbert be adjusted for more region changes, or an indefinite number of region changes?
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html -
Is there a count limit for the AP invoice distribution line?
Dear All,
I'm tring to load a invoice file from a legacy system to oracle. Is there a count limit for the AP invoice distribution line?
Thanks & Warm Regards!
JeromeHi Jerome,
Which version of oracle apps you are working on?
--Manpreet -
I just got my iPhone 4s and everything was working great. I was buying apps and music and everything
Was grand then iTunes asked me to update my billing details and so I tried but every time I put them in it keeps saying
Card declined even thought this is the card I've been using. I contacted the bank and they said the card is ok and active
And there's money in the account so I don't no what's wrong I called into the apple store and the guy
Advised me to go here and go through iTunes support. do here we are
Please help me get this sorted as I have an iPhone and no apps.!!
Thanks mike.You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms. -
Number Range For the accounting document
Hai,
After creating the billing document, account determination error is coming.
Message says that number range 01 is not maintained for the accounting documentGo to OBA7, select the document type RV and execute. There ensure that the object 01 in the field number range assignment. Next go to FBN1, key in company code and ensure that the above object is maintained there.
thanks
G. Lakshmipathi -
I have just started using Thunderbird and want to set up a number of list groups in my Address Book so that I can simply click on the list name and the email goes to multiple people.
Is there a limit to the number of addresses that I can put into each group? Or, can I put as many addresses into each group as I want to? Thanks for your answer.Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List
Maybe you are looking for
-
Hi Gurus, Can anybody throw lite on this issue ? In a repetitive manufacturing environment please provide examples of the circumstances under which WIP may be reported from the SAP system as a positive value when all manufacturing has been completed.
-
How to set mw600 as stereo bluetooth headset in HP pavilion dv6 and control media player?
i have mw600 and it works great when paired with my satio. i was able to pair it with my HP pavilion dv6 64-bit windows 7 home premium but the audio quality is mono and not stereo. i tried installing lenovo and broadcom bluetooth drivers like i read
-
What do I do about this problem?
-
HDMI v. Firewire?
Recently saw through this site a Black Magic HDMI card that allows video capture from a HDMI equipped camcorder. Is the captured HDMI video so much better than Firewire capture that the card is worth purchasing? My camcorder has both HDMI and firewir
-
HT5622 How do I return and get a credit for an app?
Need Help