Is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down?

Question:
When the Database is shutdown gracefully everything was fine.
But when the Database is brought down with shutdown abort the MDB consumer will never consume messages from the topic again. And we need to restart the WebLogic Server in order to get the messages consumed again.
So is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down? If not, what type of failures will require the JMS/WLS restart?

On a DB failure, a WL JDBC store service will make a brief attempt to reconnect before shutting itself down along with any services that depend on the store.
It isn't necessary to restart the entire WebLogic Server JVM to bring the affected service(s) back if you can use the Automatic Service Migration feature. ASM can automatically restart a failed service on a different WL Server in the same cluster, and/or can try a restart-in-place for the service if the service's original host WL Server JVM is still running. The Automatic Service Migration (pdf) white-paper has a thorough discussion of this area.
In addition to ASM, there's also a "whole server migration" option that can automatically restart or migrate an entire WL server.
Tom

Similar Messages

Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

My friend found an iPhone 5 ; he plugged it in the computer willing to restore when the restore was succesfulhe was ready to set it up on his way to do it , icloud ask him for a password from certain email he doesnt know, is there any way you could skip ?

my friend found an iPhone 5 ; he plugged it in the computer willing to restore when the restore was succesfull he was ready to set it up on his way to do it , icloud ask him for a password from certain email he doesnt know, is there any way you could skip this step or delete the accoun without putting a password down ?

9EriickxD wrote:
my friend did but they couldnt tell whose it was. now he/she just trying to restore it. But not knowing how to get rid off it
Turn it into the police.
Your friend should not keep someone elses iphone without making every attempt to fget it to the rightful owner.

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

If you created as an Exchange account on the iPhone (not IMAP or POP) and you have Push on it should all work smoothly; Reading a message on either client should mark the other read (it does on mine). Try deleting the account from the phone, rebooting the phone (to clear out old settings), then go to Settings/Mail,Contacts,Calendar, add an account and tap Microsoft Exchange and add the account back.
There is a fundamental difference between BB and iPhone that you should be aware of; on the BB you do not sync directly with Exchange; you sync with the RIM server which then syncs with your Exchange server. The iPhone syncs directly with Exchange using Microsoft's ActiveSync protocol. So in some ways they will behave differently. But ActiveSync should manage marking messages as read correctly.

Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
“-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
Hope this will help other people who encounter similar problems in the future!

Why the iPhone vibrates 2 times when the iPhone OS is starting?

Someone know why the iPhone vibrates two times when the iPhone OS is starting (and the apple logo appears)
In my case, this rare event occurs when a problem with an application (3rd party) force to iPhone to restart or when occurs a problem during the sync with iTunes. After this event, my iPhone never load (your OS) and the only way is the restore.
null

Amazing how much trouble when can get into by taking shortcuts before we understand something... isn't it....
Read the API and find out for yourself what events are triggered by a JButton......
Remember thsi advices:
1) Before using shorthand event handling, make absolutely sure that you understand the process back to front...
2) Write your own event, listener and implementer in order to get a clearer picture...
3) Until this is clear to you, always implement the appropriate listener and override the necessary methods....

My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?

My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?

Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice.

Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers.

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers. Any ideas?

version 10.6.8

Can i set the camera to record motion when the alarm is on

can i set the camera to record motion when the alarm is on

can i set the camera to record motion when the alarm is on

Is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down?

Similar Messages

Maybe you are looking for