Is there a script for Windows I can use to make iTunes read CD text?

I've looked all over and all I cannot seem to find one that works for Windows, only Apple. Thanks!

Yes, but you can always try customized skins from this site: http://itunes-skins.com/ .

Similar Messages

Is there some sort of utility I can use to make 'profiles'? Update:Check inside for scrip

Is there a utility that can help me out? The mode changer utility only goes about halfway for what I need.
I think it's kind of annoying to have to switch modes, but I understand the reasoning behind it - I just wish there was a more convenient way to do it. This is a step in the right direction, but it is missing one key feature - it can't control anything outside of the modes.
I personally wish there was some way I could set up profiles, that I could then perhaps make a direct shortcut to and just double click to set it, rather than going through numerous menus. My specific issue is that I spend a lot of time with headphones, and a lot of time with speakers, both in and out of games.
Using 4. speakers in entertainment mode for music and movies, I use some eq to flatten the response, maybe 35% crystalizer, and cmss-3d surround. Switching to a game with speakers, I turn up the crystalizer a bit.
Using a very good set of headphones in entertainment mode, I MUST turn off CMSS-Headphones. It is an absolute atrocity, and destroys any semblance of detail in the music. I also need far less if any crystalizer, and virtually no eq.
Switching to game mode, I have to turn CMSS-headphone back on to get the 3d HRTFs activated. Since its a game, I use a bit more crystalizer.
Basically, any time I want to switch between headphones and speakers, or game and entertainment, I have to go back into the console to reconfigure everything if I want it sounding its best. I basically have to leave the console open all the time. This is so irritating to me, sometimes I forget, and find myself checking the console just to see if I got it right...there has to be a better way.Message Edited by bd2003 on 06-2-2006 05:34 PM

You can modify the method used on Mode Changer -utility by yourself.
Just add/edit 'movements' the way you wish the script to be working for you.
Here are 2 script examples you can use as a starting source. Movements on both scripts are based on Audigy 2 speaker selections option order which is :
st option 2/2. --> {HOME} or {END}{UP}{UP}{UP}{UP}
2nd option 4/4. --> {END}{UP}{UP}{UP}
3rd option 5. --> {END}{UP}{UP}
4th option Headphones --> {END}{UP}
5th option 6/6. --> {END}
!! You need to have Creative Audio Console installed to get these scripts working.
!! Close Audio Console before executing a script.
' ================== st script ====================
'----- Start Of "Headpones.vbs" ----- (Save as Headphones.vbs) ---------------------
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Script starts up the Audio Console
' !! RENAME THE PATH IF YOU HAVE AUDIO CONSOLE INSTALLED IN DIFFERENT PATH
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioConSole\"
WshShell.Run("CTAudRun.exe" )
' slower PC's --> sleep value maybe needed to be increased
WScript.Sleep(00)
' send some keystrokes to get the speaker settings box activated
' This is the locating 'routine' you use to get to the settings screen (selecting tabs and dialog)
WshShell.SendKeys("{TAB}{TAB}{RIGHT}{TAB}{TAB}" )
' set the speaker selection to Headphones (jump to last option and then up-arrow to previous option)
' here you set the setting option as you want it to be
WshShell.SendKeys("{END}{UP}" )
' exit Audio Console -panel
' If you have more settings to do you just add movements the way you need (like backing up to the tab selection etc.
WshShell.SendKeys("{TAB}{TAB}{ENTER}" )
WScript.Quit(0)
'----- End Of "Headphones.vbs" -------------------------------------------------------------
' ================== 2nd script ====================
'----- Start Of "5..vbs" ----- (Save as 5..vbs) -------------------------------------------
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
' RENAME THE DIRECTORY IF YOU HAVE AUDIO CONSOLE INSTALLED IN DIFFERENT PATH
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioConSole\"
WshShell.Run("CTAudRun.exe" )
' slower PC's --> sleep value maybe needed to be increased
WScript.Sleep(00)
' send some keystrokes to get the speaker settings box activated
WshShell.SendKeys("{TAB}{TAB}{RIGHT}{TAB}{TAB}" )
' set the speaker selection to 5. item (jump to last option then up-arrow twice to 5.)
WshShell.SendKeys("{END}{UP}{UP}" )
' exit Audio Console -panel
WshShell.SendKeys("{TAB}{TAB}{ENTER}" )
WScript.Quit(0)
'----- End Of "Headphones to 5..vbs" -----
How it works? Copy script and paste it to Notepad --> edit the moves you want the script to execute and save as (all filetypes) --> name.vbs --> execute by double clicking the name.vbs file --> script opens the Audio Console and makes those moves you programmed into script (you'll see it on action).
jutapa

I want to watch 2d movies converted to 3d, is there any software which can do this for mac, i know there are many for windows.Or any player which can do this?

I want to watch 2d movies converted to 3d, is there any software which can do this for mac, i know there are many for windows.Or any player which can do this?
Or may be i can can watch normal 3d movies on my macbookpro with a glass?

Xilisoft 3D Video Converter for Mac - 3D converter to convert 3D ...
Mac 3D Video Converter - 3D Converter convert 2D video to 3D, 3D ...
Convert DVD Movies to 3D Mac - Best 2D to 3D Converter
4Media 2D to 3D Video Converter for Mac: Convert 2D video to 3D ...
Convert 2D Video to 3D for Mac- Tutorial for You about Using 2D ...

How to find the existing sql server backup plan/schedule is there a script for that?

Friends,
Is there a easy way to find out in SQLServer (for All DB's) what is the current backup plan/schedule ? is there a script for that?
Thanks,
Karthikeyan Jothi

To check the database backup
Select
SERVERPROPERTY('ServerName'),
db.name,
CONVERT(VARCHAR(10), b.backup_start_date, 103) + + convert(VARCHAR(8), b.backup_start_date, 14) backup_start_date,
CONVERT(VARCHAR(10), b.backup_finish_date, 103) + + convert(VARCHAR(8), b.backup_finish_date, 14) backup_finish_date,
case
when (DATEDIFF(hour, b.backup_start_date, getdate())<24)then 'Success'
when (DATEDIFF(hour, b.backup_start_date, getdate())>=24)then 'Failed'
end Status,
DATEDIFF(hh, b.backup_finish_date, GETDATE())BackupAgeInHours,
(b.backup_size/1024/1024/1024 )BackupSize,
case b.[type]
WHEN 'D' THEN 'Full'
WHEN 'I' THEN 'Differential'
WHEN 'L' THEN 'Transaction Log'
END Type,
ISNULL(STR(ABS(DATEDIFF(day, GetDate(),(Backup_finish_date)))), 'NEVER')DaysSinceLastBackup
FROM sys.sysdatabases db
Left OUTER JOIN (SELECT * , ROW_NUMBER() OVER(PARTITION BY database_name ORDER BY backup_finish_date DESC) AS RNUM
FROM msdb.dbo.backupset) b ON b.database_name = db.name AND RNUM = 1
where dbid<>2
OR
SELECT
DISTINCT
a.Name AS DatabaseName ,
CONVERT(SYSNAME, DATABASEPROPERTYEX(a.name, 'Recovery')) RecoveryModel ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'd'
AND is_copy_only = '0'
), 'No Full') AS 'Full' ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'i'
AND is_copy_only = '0'
), 'No Diff') AS 'Diff' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), MAX(backup_finish_date), 120)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
), 'No Log') AS 'LastLog' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), backup_finish_date, 120)
FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY backup_finish_date DESC ) AS 'rownum' ,
backup_finish_date
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
) withrownum
WHERE rownum = 2
), 'No Log') AS 'LastLog2'
FROM sys.databases a
LEFT OUTER JOIN msdb.dbo.backupset b ON b.database_name = a.name
WHERE a.name <> 'tempdb'
AND a.state_desc = 'online'
GROUP BY a.Name ,
a.compatibility_level
ORDER BY a.name
To check the schedule you can try the below script
https://gallery.technet.microsoft.com/SQL-Jobs-Complete-eabe0050
--Prashanth

Is there a JRE for windows mobile 6.1 ?

Hi everyone,
I need to install a Java Virtual Machine on my Intermec CK3 device which runs on Windows Mobile 6.1.
Can anyone advice where to download the JRE ?
Is there a JRE for windows mobile ?
Thanks in advance,
Best Regards

I don't believe that that IS a legal download.
This here is a more legal option:
http://www.makeuseof.com/tag/install-java-windows-mobile/

Is there a plugin for windows media player for my android phone

is there a plugin for windows media player for my android phone

There is no Windows Media player plugin for any browser on Android. If you are lucky download the file and see if any of media players on the system can play the file.

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c
Thank you.

Hi,
I afraid you will not be able to use the scanner with Windows 8.1, it is not compatible with the OS.
Regarding VueScan, I afraid it would not be an option as well, the application only support your scanners if there are drivers for the OS:
If there isn't an HP scanner driver at www.hp.com for your operating system, then unfortunately VueScan won't work with this scanner.
You may try using the Vista drivers by running the drivers using the Program Compatibility Troubleshooter as listed below.. select Not Listed from the programs list and browse to the installation file for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03401961&lc=en#N63
The installation file for Vista can be downloaded below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-47405-1&cc=us&dlc=en&lc=en&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Adobe CS3Clean Script for Windows

I have downloaded and unzipped the file located at:
http://www.adobe.com/support/contact/cs3clean.html
English/Japanese
Download the Adobe CS3Clean Script for Windows (ZIP, 978 KB)
Each time I extract the files, the
AdobeCS3CleanReadMe.pdf
will not open because it is corrupt.
There is an additional file named:
âNâèü[âôâAâbâvâXâNâèâvâgé+é-éóé-.pdf
which I have not attempted to open for obvious reasons....

I don't know for sure, but a good guess is that it's the same
readme in
Japanese. I don't have Japanese characters installed so
perhaps that's why
the gobbletygook?
However, the AdobeCS3CleanReadMe.pdf in the download I just
got is fine.
Try downloading again .. if that doesn't help .. and your
Adobe Reader is
updated .. drop me a line and I'll send you the PDF from my
download.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"sbuck415" <[email protected]> wrote in
message
news:fg5q7a$l0s$[email protected]..
>I have downloaded and unzipped the file located at:
>
>
http://www.adobe.com/support/contact/cs3clean.html
>
> English/Japanese
> Download the Adobe CS3Clean Script for Windows (ZIP, 978
KB)
>
> Each time I extract the files, the
> AdobeCS3CleanReadMe.pdf
> will not open because it is corrupt.
>
> There is an additional file named:
> ?N???[???A?b?v?X?N???v?g?+?-???-.pdf
> which I have not attempted to open for obvious
reasons....
>
>
>

Can I download something from the internet that is only meant for windows? Can I make it work with safari?

I would like to download a business program from the internet, but it is only meant for windows. Can I make it work on my mac?

You are aware that you can purchase and install a copy of Windows directly on your Mac, right?
Boot Camp is included with OS X, and requires that you create a separate partition for Windows and install it onto your Mac hard drive. You re-boot your Mac computer into Windows when you want to run the Windows app.
There are also virtual machine environments that will allow you to run full Windows at the same time as Mac OS X: Parallels Desktop, and VMWare Fusion.
Windows performance running in a virtual environment will be limited by the amount of RAM available, the microprocessor, and the amount of hard disk space available.
Parallels offers a free 15-day trial, but you still need a full licensed copy of Windows in order to test it.
Message was edited by: kostby

Cold Backup Script for windows

Hi,
I have the following script for windows
set pages 0 lines 500;
set heading off echo off feedback off verify off pagesize 0;
select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP\ORADATA\' from v$datafile
union all
select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP' from v$controlfile
union all
select 'copy ' || member ||' c:\BACKUP\COLD_BACKUP' from v$logfile
union all
select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP' from v$tempfile;
exit;
In the above script I have given COLD_BACKUP directory for Backup....But what i want is Dynamically it should create the Directory with timestamp in COLD_BACKUP Directory and copy the files to that directory..
for example
script should create like this
c:\BACKUP\COLD_BACKUP\ORCL_11112007
Like that..it should create the ORCL_11112007 directory and copy the files....
how can i acheive this...I know we can do it in UNIX..
But in windows..how we can acheive this...please help me

You can try to adapt the following SQL*Plus script to create a directory:
set echo on
alter session set nls_date_format = 'DDMMYYYY';
var dd varchar2(10);
begin
:dd := trunc(sysdate);
end;
set echo off
spool mkd.sql
set heading off
select 'host mkdir ' || :dd from dual;
spool off
set echo on
@mkd.sqlOutput is:
dev001> alter session set nls_date_format = 'DDMMYYYY';
Session altered.
dev001> var dd varchar2(10);
dev001>
dev001> begin
2 :dd := trunc(sysdate);
3 end;
4 /
PL/SQL procedure successfully completed.
dev001>
dev001> set echo off
host mkdir 08112007
dev001> @mkd.sql
dev001>
dev001> host mkdir 08112007
dev001>
dev001>
[pre]

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

I upgraded my iPad 2 to iOS8 and keep getting knocked off of cellular data. Is there a fix for this? Can I downgrade back to iOS7?

I recently upgraded the software on my iPad 2 to iOS8.02. Since upgrading the iPad is running slower and choppier, with several apps no longer working. In addition, it keeps knocking me off my cellular data and showing no service. Is there any fix for this, or can I downgrade the iOS back to 7?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

I bought a new laptop (Macbook) but the current installation files I have of Photoshop Elements 12 is for Windows, how can I change this? Or do I have to purchase an all new photoshopset?

Can anyone help me with this question?
I bought a new laptop (Macbook) but the current installation files I have of Photoshop Elements 12 is for Windows, how can I change this? Or do I have to purchase an all new photoshopset? I hope not because that would be really expensive.

Really? That's extremely unusual. Have you looked at all the discs? In any case you can download the mac version here:
Download Photoshop Elements products | 12, 11, 10

ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

I suffered a hardware failure on my PC, and have moved to an iMac. I own Adobe creative Suite 4 for Windows. Can I transfer the license to my new iMAC without the huge expense of buying a new license?

I suffered a hardware failure on my Dell desktop PC, and have moved to iMac. I own Adobe creative Suite 4 Design Premium for Windows. Can I transfer the license to my new iMAC without the huge expense of buying a new license or purchasing a month to month option?

you need a cross-grade, but adobe only offers free cross-grades for current releases, Order product | Platform, language swap

Is there a script for Windows I can use to make iTunes read CD text?

Similar Messages

Maybe you are looking for