Is there a ScriptUI/ExtendScript event for project load?

I have a dockable ScriptUI Panel that I want to load information from a project (I have looked into app.settings, but I think app.settings is for the application itself), but the ScriptUI Panels load before a project is loaded.
Is there a message/event that I can attach to to refresh my information? onLoad perhaps?
Thanks for any insight you may have.

Well the label can only be changed when the VI is idle, so just read the label when the Application.state event is triggered.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

Converting Events for Projects

Hi,
We are interfacing Project accounting information from 2 other systems. We need to create revenue events.
Ideally, we would like to use an event type that a user cannot manually enter, so we thought we would use an event type with a class of Automatic.
However, if you use the PA_EVENT_PUB.create_event api, you are limited to event types whose classification is not in 'AUTOMATIC','REALIZED_GAINS','REALIZED_LOSSES'.
If we try and use the PA_BILLING_PUB.create_event (which requires a little slight of hand), it allows us to create the billing event, however there is no way to provide a value for the PM PRODUCT CODE which would indicate where the data came from.
Can anyone suggest a way around this impass?
We are on 11.5.10 apps, implementing project billing.
Will

Hi,
I am surprised that PA_EVETNS api not supporting Automatic event types. You can use reference1, reference2 parameters in PA_BILLING_PUB api to keep the legacy references. But note that this API is meant for billing extensions not for generic event creations.
Regards
RK

Is there a task switch event for iOS? Like Event.DEACTIVATE for Android

Hello,
I need to be able to trigger a function when someone presses the front facing button that has the square in it on an iDevice.
I've tried:
NativeApplication.nativeApplication.addEventListener(Event.DEACTIVATE, quitApplication);
This doesn't work on iOS but it does work on Android.
Anyone have an idea what to do?
-Scott

Hi,
If you want to exit the application on pressing the Home button, set the following in the iPhone section of application xml:
<key>UIApplicationExitsOnSuspend</key>
<true/>
Thanks,
Sanika

Event for Project Definition CJ20n

Hi,
how to trigger an event from Transaction Cj20N. i want to raise an event to start my workflow.
Thanks
Naresh

Hi
The Object is MLST_NETW
and event is STARTED.
Do binding and check the start workflow check box give workflow number and then it will trigger the workflow.
Thank
Deepanker Dwivedi

Business packages for Project systems

i,
I wanted to know if there is a business package for Project systems which include transactions like CJ20N, CN33, CN41N, DP81,VA23, VA25. I checked in SDN Portal content portfolio and found there is a BP for Projects 5.3 and BP for Project self service. I checked out the content which is present but not sure whether it suits my requirements.
Appreciate if any one can point to the right Business package.
Regards
PN

Hi,
Chk out this link, it points to Project Self Service.
http://help.sap.com/erp2005_ehp_01/helpdata/en/3f/a197422836c76ae10000000a155106/content.htm
You can find the prerequisites & the configuration required in the above link.
For this Business Package you have to install the following software components:
SAP PSS 600
BP ERP05 PROJ SELF-SERV 1.0
Regards,
Abhishek

Writing own event for Reservation creation BUS object

I am trying to create a workflow that should get triggered when a new reservation is created for approval. I am using the BOR object for material reservation but it does not contain an event of creation. I wish to create a new event and then add code to the event so that a mail to an approver can be sent. Using the approval received I need to confirm the reservation else render it cancelled.
I require help in creating the event and writing the event code for it.
Thanks for taking time to go through my query
Zankruti Parikh

Hello Zankruti,
    Indeed, there's no such event for BUS2093. And if you try to do this to object BUS2093, you will come across error: "No change document object for business object type BUS2093".
    Given this, in your case, I am afraid that you will have to extend object BUS2093 by using delegation - then you will be able to add events CREATED or CHANGED, if necessary. Use transaction SWO1 to this, click on "settings" delegate, delegation type = ZBUS2093(for example) - you will delegate your ZBUS2093 type to BUS2093. After that, you will be able to create the events.
Following the idea, I believe that the easiest way to do this is thorugh enhancement MBCF0007 (Customer function exit: Updating a reservation). Click on components, and then you will see EXIT_SAPMM07R_001. Within this exit, you can call SWE_EVENT_CREATE_IN_UPD_TASK (you trigger the events you will have created above).
Regards,
Andre Sousa
Edited by: Andre Sousa on Jan 4, 2008 9:35 PM

Event for RibbonTab click in Excel Addin

Hi,
I am working on an Excel Addin. I am using VS 2008 and Excel 2007.
Currently my addin gets loaded on opening of Excel. Since i have a dropdown in the Ribbon, even that gets loaded on openeing of Excel. And since that loading of dropdown takes time, i wanted to change this behavior. I wanted to load my Addin on click of the
Ribbon Tab. For this i wanted to know how to fire the event on click of Ribbon Tab.
Usually ThisAddIn_Startup() is the method that's fired first when excel is opened. But i want to call this method in the event of Click of Ribbon Tab. Is this possible?
basically i want to capture click event of Ribbon Tab.
Can someone please help me on this.
Regards,
Shailendra

Hi ,
Here's a short sample for you, as Cindy mentioned there's no "click event" for a Ribbon tab, so we need to pick Dropdown list instead.
The idea is when Excel starts we add a button in Dropdown list, if user click the button, then refresh the Dropdown list,fill it with the real data, and also hide the button at same time:
<?xml version="1.0" encoding="UTF-8"?>
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui" onLoad="Ribbon_Load">
  <ribbon>
    <tabs >
      <tab idMso="TabAddIns"  >
        <group id="MyGroup"
               label="My Group">
          <dropDown id="myDropDown" onAction="dropDownAction" getEnabled="dropDownGetEnabled" getItemLabel="ItemLabel" getItemCount="ItemCount"  >
            <button id="mybutton" label="Button" onAction ="ReDraw" showImage="false" getVisible="getButtonVisible"/>
          </dropDown>
        </group>
      </tab>
    </tabs>
  </ribbon>
</customUI>
  bool ButtonVisible = true;
        int itemCount = 0;
        public void Ribbon_Load(Office.IRibbonUI ribbonUI)
            this.ribbon = ribbonUI;
        public void ReDraw(Office.IRibbonControl RibbonControl)
            this.ButtonVisible = false;
            this.itemCount = 9;
            ribbon.InvalidateControl("myDropDown");
            ribbon.InvalidateControl("mybutton");
        public void dropDownAction(Microsoft.Office.Core.IRibbonControl control, string selectedId, int selectedIndex)
        public bool dropDownGetEnabled(Office.IRibbonControl RibbonControl)
            return true;
        public string ItemLabel(Office.IRibbonControl control, int index)
            return "Item " + index.ToString();
        public int ItemCount(Office.IRibbonControl control)
            return this.itemCount;
        public bool getButtonVisible(Office.IRibbonControl RibbonControl)
            return this.ButtonVisible;
For more information about InvalidateControl method :
http://msdn.microsoft.com/en-us/library/aa433553.aspx
Thanks

Project Load: Error Alerts Suppression Feature

I don't believe there is, but does anyone know of a way to suppress error alerts when loading a project that's missing plugins, can't load a mov file, etc...?
I've already filed a feature request for this and would love if others would too. This has been a big annoyance for me on a large project. Having to click Ok on 20+ alert popups is unnecessary and mind numbing to say the least when you are trying to get in and out of a file quickly. After Effects should simply log all of the errors and create an Error log text file and after the last error just before project is ready to open show one simple alert stating that there were errors and to check out the log for details, or even a small summary of the errors in ONE alert popup. If there is an error, I get it, no need to announce every single one and force me to Ok it. Just give me a list of the problems. Faster, more organized, and just simply a better user experience.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
This is what I filed:
*******Enhancement / FMR*********
Brief title for your desired feature:
    Error log text file for project load errors.
How would you like the feature to work?
    When opening a project that has errors with files, missing plugins, etc... errors of any kind. It would be extremely valuable to consolidate those alert warnings into one single txt log file for easy review and only have ONE alert that either gives a summary of the errors or states that an error log was created in the parent folder of said project file.
Why is this feature important to you?
     Getting a single alert popup for every single error is extremely annoying and in most cases takes way too much valuable time to babysit and click "Ok" for every alert. This annoyance is amplified by not having a printed summary to review afterwards if there are lots of errors or missing plugins.

This is the primary one that I have been dealing with a lot. It's Avid media conversion files that are hit and miss on mac it seems. I have lots of composition timelines that were built via AAF through Auto Duck and these timelines need to stay present in my project. So I have to deal with 10 - 30 of these alert popups each time I open a AEP file, due to the number of mov's in the AEP file. Stuff like that is what makes no sense. Consolidate all errors into one notification, preferrably something tangable like a simple text document so it can be easily reviewed and delt with if need be in addition to the alert popup.
Also after opening another AEP that had missing plugins, I now see the new consolidated alert for missing plugins. Many thanks, that really helps.

After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

Is there a way to retrieve my projects and events?

I have copied final cut projects and events to my Mac internal drive from an external drive on which they were located. I could not do this via FCPX because of a problem: FCPX being unable to open up unless [it says] some corrupt files are either restored or move. Neither FCPX nor I are able to do this [restoring or moving out of the corrupt files].
So, after copying the events and projects onto my Mac's HD, I tried to open the currentproject in FCPX, but the application states that it has to be opened from within FCPX only.
Is there any workaround by which I would be able to get FCPX read these projects and events [a work of nearly 5 months]?
One idea: can I make a disk image of the projects and events folders and would they then be 'read' and accepted by fcpx?
Eagerly waiting for solution/s.

Try Digital rebellions tool,
http://www.digitalrebellion.com/promaintenance/
they have a trial version, 15 days, I think you will find that this may work for you.
Two things that may cause this
Corrupt render files, solution, delete the render files in your projects.
Corrupt media files, Pro maintenance Tool
Also, try launching the event without the projects, this will let you know which is causing the problem, event or project.
let us know how you go.
Tony

Is there a way to create a recurring revenue/billing event in Projects (r12)?

Is there any way to create a revenue/billing event in Projects that can be scheduled (billed monthly until a specified end date) other than a customization?

I think there is no standard way to do it. However you can use billing extension to create automatic events. You may define the DFF fields on Project or Task level for having a recurring amount and End Date which will be picked during Generate Draft Revenue or Generate Draft Invoices. You can check in extension that if the event is already created for that month, extension should not create another event for same month for that project or Task because user may run the processes several times in a month. Please note that there will not be any history kept for DFF changes for amount and dates.
You may decide on other means to keep recurring amount and End Dates to maintain History.
Awaiting more inputs from experts.
Also consider below statement from User Guide:
Transaction Independent
Once you determine the inputs to your calculations, you can determine if your billing extension calculation is solely dependent on other transactions being processed, or if your calculation can be executed without any other transactions being processed. Transactions refer to expenditure items and events.
Transaction independent billing extensions are executed for each project with an active billing assignment, even if there are no transactions to process. This type of billing extension relies on an input other than billable transactions on a project. If this input changes, the calculated billing amount changes, which you want to record. For example, the cost-to-cost revenue accrual method, which relies on the budgeted cost and revenue amounts. If the budgeted cost or budgeted revenue changes, the revenue amount changes. You want to record this revenue amount change even if no other transactions are processed in revenue generation. This category includes the class of billing extensions that calculate revenue and invoice amounts based on values independent of the amounts included on draft revenue and invoices.
Note: If you design a billing extension to be transaction independent, it will be executed in every run of the revenue or invoice processes.
AB

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

3 different names/events for 1 project (fcp1 + 2 etc)

I can't seem to fix this.
I have 3 events in FCPX.
I have 4 events in my FCPX folder:
I have one project: Beginner Basics
In FCPX the Beginner Basics project is linked to the event "Basic" - which I believe is the "Beginner Basic" event in Finder since that file is the largest.
But in Finder it says that it has not been edited since aug. 14 2012. But the other 3 events has changes recently.
When I open FCPX I get this message:
All files in the Beginner Basic project is linked. There are no missing files. But that is because I had to do link them manually, because I was tried to change the "Basic" events name to "Beginner Basics". FCPX crashed during these changes. And only made the changes to the Basic event in Finder and not in the program itself. (I think at least).
I am supposed to do backups and to move the project and event for archiving - but I have no clue which event belongs to the Beginner Basics project.
Heelp?

That the two Events have the same "identifier" (database ID, or UUID) means it was manually copied in the Finder. Big no-no.
The ones that have (fcp 1) and (fcp2) at the ends of the name were created inside FCP X by selecting the original and "Duplicating" it.
I'd have to see detials inside each Event to konw for sure, but here is how I'd fix it. Follow these instructions in the user manual about Merging Events to put them all together in one Event, and avoid the confusion.
http://help.apple.com/finalcutpro/mac/10.0.6/#verc1face68
Next, as for backing up, the duplicated database ID issue must be addressed. Here's an article I wrote, approved by Bombich Software, about how to use Carbon Copy Cloner to do backups properly for FCP X specifically.
http://www.fcproxuniversity.com/FCPro_X_University/Extra_Credit/Entries/2013/3/1 1_Carbon_Copy_Cloner_For_FCP_X.html
And some extra info just FYI.
http://www.fcproxuniversity.com/FCPro_X_University/Extra_Credit/Entries/2013/3/1 7_Consolidating_%26_Transcode_Events_Before_Backup_or_Transfer.html

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Is there a way to get an alarm for my events for the iCal on the iPhone 4?

Is there a way to get an alarm for my events for the iCal on the iPhone 4?

Greetings,
See page 113 of the iPhone 4 user manual: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
When you add an event to the Calendar.app of the iPhone 4 there is an "Alert" option which should give you the desired result.
Cheers.

Is there a ScriptUI/ExtendScript event for project load?

Similar Messages

Maybe you are looking for