Is there a Signed Virtual Key application

Hi,
I bought a 5800 which is a nice phone, but for using S60v3 applications there is no keypad to control these as the 5800 has no virtual keypad.
On the internet I found an application VirtualKey which solves this problem, but I tried all versions and all of them give a certificate error.
My certificate settings are good as I can install other application (both sis and jar and also Ownskin skins) without any problem.
Is there a *signed* version of this application ?
Self-signing on www.symbiansigned.com is not successful for me, it always returns errors.
Nokia 5800
FW 30.0.011

I just tried on
https://www.symbiansigned.com/app/page/public/openSignedOnline.do
as a registered user and I got:
FAILURE: Submitted .sis file uses a UID that is not allocated to the account holder matching this email address (0x200239a0 )
Is there a site which works reliably ?
Nokia 5800
FW 30.0.011

Similar Messages

Keybd_event with third party Virtual Key and WM_KEYDOWN

Hi All,
I want to use keybd_event() to send this third party virtual key called VK_OEM_CLR or 0xF5 to other application.
Third party header file defined:
#define VK_OEM_CLR 0xF5
The application that sends the key:
keybd_event(VK_OEM_CLR , 0, KEYEVENTF_EXTENDEDKEY, 0);//try this, but other application does not receive WM_KEYDOWN
keybd_event(0xF5 , 0, KEYEVENTF_EXTENDEDKEY, 0);//try this, but other application does not receive WM_KEYDOWN
The other application that will receive the sending key:
LRESULT CALLBACK LLKbdProc(int nCode, WPARAM wParam, LPARAM lParam);
HHOOK kbdhk;
int quit = 0;
HINSTANCE m_hHookApiDLL = NULL;
typedef LRESULT (CALLBACK* HOOKPROC)(int code, WPARAM wParam, LPARAM lParam);
typedef HHOOK (__stdcall *SetWindowsHookExW)(int, HOOKPROC, HINSTANCE, DWORD);
typedef LRESULT (__cdecl *CallNextHookEx)(HHOOK, int, WPARAM, LPARAM);
typedef LRESULT (__cdecl *UnhookWindowsHookEx)(HHOOK);
static SetWindowsHookExW m_pfSetWindowsHook;
static CallNextHookEx m_pfCallNextHook;
#define WH_KEYBOARD_LL 20
typedef struct {
DWORD vkCode;
DWORD scanCode;
DWORD flags;
DWORD time;
ULONG_PTR dwExtraInfo;
} KBDLLHOOKSTRUCT, *PKBDLLHOOKSTRUCT;
void Dbg( TCHAR * lpszFormat, ... )
TCHAR szOutput[1024];
TCHAR * pOutput = szOutput;
va_list v1;
DWORD dwSize;
// Now do the normal printf stuff...
va_start( v1, lpszFormat );
dwSize = ::wvsprintf( pOutput, lpszFormat, v1 );
va_end( v1 );
OutputDebugString(szOutput);
_tprintf(szOutput);
LRESULT CALLBACK LLKbdProc(int nCode, WPARAM wParam, LPARAM lParam)
KBDLLHOOKSTRUCT *pKeyBoard = (KBDLLHOOKSTRUCT *)lParam;
switch( pKeyBoard->vkCode )
case 245://VK_OEM_CLR,0xf5,245
switch(lParam)
case WM_KEYDOWN:
Dbg(_T("receives VK_OEM_CLR, hex 0xf5, decimal 245 on WM_KEYDOWN\r\n"));
return 1;
case WM_KEYUP:
Dbg(_T("receives VK_OEM_CLR, hex 0xf5, decimal 245 on WM_KEYUP\r\n"));
return 1;
default:
Dbg(_T("receives VK_OEM_CLR, hex 0xf5, decimal 245 \r\n"));
break;
return 1;
break;
default: // no processing on this key
Dbg(_T("switch-case: Unknown key\r\n"));
return m_pfCallNextHook( NULL, nCode, wParam, lParam );
return 0;
int main()
m_hHookApiDLL = LoadLibrary(L"coredll.dll");
if(m_hHookApiDLL != NULL)
HINSTANCE appInstance = GetModuleHandle(NULL);
m_pfSetWindowsHook = (SetWindowsHookExW)GetProcAddress(m_hHookApiDLL,L"SetWindowsHookExW");
kbdhk = m_pfSetWindowsHook(WH_KEYBOARD_LL, LLKbdProc, NULL, 0);
if (!kbdhk)
Dbg(_T("WH_KEYBOARD_LL FAILED.\r\n"));
return -2;
//Dbg(_T("Message Pump... Listening...\r\n"));
MSG msg;
while(GetMessage(&msg, NULL, 0, 0) > 0)
if (quit) break;
TranslateMessage(&msg);
DispatchMessage(&msg);
return 0;
The application that receives the key, always catch the virtual key for VK_OEM_CLEAR, but there is no WM_KEYDOWN. Am I doing something wrong?

That is it.. Thank you so much. other cases I use wParam,
but overlook for this case.

Virtual keys - JIS keyboard layouts

I have found that the mapping of virtual key codes to actual characters is not exactly right using a Mac JIS keyboard and the US layout. For instance, the @ sign is on the key next to the 'P' key. Using a non-Mac JIS keyboard and setting the US layout gives the expected result: the @ sign is on the same key as '2'
Is there some way to tell Carbon that when I post a keyboard event (CGPostKeyboardEvent()) for the virtual key code corresponding to key '2', I want the receiver program to get a @ sign (if shift is being pressed)?

Thanks guys for your help. Much appreciated.
I tried your suggestion to reset the SMC, but unfortunately it didn't help.
So I rang the Apple customer service here in Japan. To my surprise the phone call was toll-free, even from a mobile. They were very helpful and even called me back several times. I usually only complain about Apple customer service in Japan, so it's nice to be able to say something nice about them for a change.
Anyway, my keyboard is working properly again now, and I'll write about how it got fixed so in case anybody else has this problem they can find some help here.
So, resetting the SMC didn't work, so we tried clearing the PRAM by restarting and holding CMD-OPT-P-R. According to the Apple operator, that usually helps with this problem, but it didn't in my case.
Next we created a new user account to see if the problem was system-wide, or just specific to my user account. The keyboard worked fine in the new account, so the problem was specific to my user account, which suggested that the problem was in one of the libraries (.plist).
The operator consulted her techies and called me back. Unfortunately, there was no way to find the problem without going through every .plist one by one, so in the end I had to do an 'erase and install'. So I backed up with Time Machine and reinstalled.
When I restored from Time Machine, I had to do it manually by dragging and dropping from my external hard drive. I restored everything EXCEPT the 'library' folder. The operator went through the back-up library folder with me, taking only those .plists that I really needed, such as my email settings etc.
And that's it. Finished. Took me ages, and I'll never know what caused the problem in the first place.
Thanks again for your help, everyone.

Virtual Key Figure

Hi all,
Before implementing a virtual key figure, I'd like to make sure this will answer my need. I work for a brewery, and I am looking at our customer taps activity.
Records in the cube:
Trading Region A, Brand X, Customer 001, Action "Install": 1 "Tap action"
Trading Region A, Brand X, Customer 002, Action "Install": 2 "Tap action" (<i>new taps</i>)
Trading Region A, Brand X, Customer 002, Action "Removal": 1 "Tap action" (<i>old tap</i>)
So what I want to have in my report is :
Trading Region A Brand X: 2 "customer activity"
I am thinking I could use a virtual key figure that will look in the cube and check if there was any activity for a customer on that brand and trading region, and then will allow me to aggregate the result in the query.
But I am not sure because it seems to me that Virtual Key Figure are calculated at record level...
Could any of you clarify this for me ?
Many thanks for your help,
Nicolas

Thanks a lot !
I don't know why I tried such a complicated solution...
Tried to assign points and close the issue, let me know if it didn't work as this is my first post...

Digitally Signing Flex/AIR Application

I am looking for some help with updating an AIR application with a renewed certificate.
The way that Adobe AIR handles digitally signed certificates is fairly confusing. I think it has changed with the release of AIR 1.5.3 and this change has caught us off guard and has resulted in some problems.
According to the Adobe website: Prior to AIR 1.5.3, signing an AIR application with a renewed certificate did not always require a migration signature. Starting with AIR 1.5.3, a migration signature is always required for renewed certificates.
Furthermore: The certificate must be changed before the original certificate expires. If you do not create an update signed with a migration signature before your certificate expires, users will have to uninstall their existing version of your application before installing a new version. As of AIR 1.5.3, an expired certificate can be used to apply a migration signature within a 180 day grace period after the certificate has expired. (You cannot use the expired certificate to apply the main application signature.).
See:
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7ff0. html#WS5b3ccc516d4fbf351e63e3d118666ade46-7cca
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS13ACB483-1711-43c0-9049-0A7251630A7D.htm l
BOTTOM LINE:
We did not create a "migration signature" within the 180 grace period because we had no updates (bug fixes or enhancements) to our application during this time. When I finally did prepare a new release of our application and signed it with our new certificate, the Adobe installer is not recognizing the new application as an UPDATE of the old application so when you try to install it, the user gets an error message that an application that the same name is already installed. In the past, the installer recognizes the new application as an update and it replaces the old app. I think there may be a way for me to handle this properly, but all of my attempts so far have not produced the results I am looking for.
The issues may be related to specifying a Publisher ID. We may need to specify the publisherId in the descriptor.xml file, which we have never had to do in the past. However, the publisherId property may only be available in 1.5.3. I have been having trouble specifying the 1.5.3 name space (<application xmlns="http://ns.adobe.com/air/application/1.5.3">). I think that must only be available for newer versions of the compiler. I am currently using 3.5.
Are there any experts on this topic that can explain How I can package my updated app so that the installer recognizes it as an UPDATE and not a NEW APP with the same name (which doesn't work)?

Any ideas on this?

Known Issue in Nokia Lumia 720 - Virtual keys stop...

Hi Nokia lumia 720 bottom virtual keys stops working after some time.............. only solution is to replace screen which costs 7000.... Is there any permanent solution? pls help

Did you try any troubleshooting steps ?
1.Simple Reboot
2. Soft Reset : Press and hold Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). - All data will remain intact
3. Factory Reset : settings-->about-->reset your phone - Data will be erased and phone will need re-setup from start
4. Nokia Software Recovery Tool - Data will be erased and phone will need re-setup from start.
If nothing from the above solves it, it's an Hardware issue that needs to be attended by Nokia care technician... which may lead to a spares replacement.

Signing a JavaFX application

Hi!
I have two questions regarding signing of a JavaFX application:
1. In the documentation I read that there is no need to sign an application. But when I try to run a sample application (without any need of special security) in a web browser, I get a runtime error if I don't sign the application before. Is it necessary to sign a JavaFX application if it is intended to run in the browser?
2. I am signing my JavaFX application with the corresponding Ant-Task. So far I created a keystore a self signed certificate and it works.
Is it possible to use a commercial certificate I use for an apache webserver and how? I could not find any information concerning this topic.
Thanks in advance!

990382 wrote:
Hi!
I have two questions regarding signing of a JavaFX application:
1. In the documentation I read that there is no need to sign an application. But when I try to run a sample application (without any need of special security) in a web browser, I get a runtime error if I don't sign the application before. Is it necessary to sign a JavaFX application if it is intended to run in the browser?It depends on what your application is doing, but in the majority of cases the answer is "yes". Certain actions are prohibited for embedded applications unless they specifically request permissions for them, and to do so the application needs to be signed. Examples of these actions are reading and writing to the file system, or some actions with multithreading. Another important example is suppressing access checks in order to manipulate inaccessible (usually private) fields or invoke inaccessible methods by reflection. Injection of FXML-defined objects into a controller relies on being able to do this. So in short, an application that uses FXML will almost always need to be signed.
2. I am signing my JavaFX application with the corresponding Ant-Task. So far I created a keystore a self signed certificate and it works.
Is it possible to use a commercial certificate I use for an apache webserver and how? I could not find any information concerning this topic.
Thanks in advance!You need to import the commercial certificate into the keystore. I've never needed to do this (at least, not yet), but there is some documentation on how to do so [url http://docs.oracle.com/javase/tutorial/security/toolsign/signer.html]here. The optional step (between steps 3 and 4) is the one of interest to you.

Problems using virtual key figures

Hi experts,
I have got 2 questions regarding virtual key figures, by using the OLAP BADI
1. Is there a chance to get the variable values out of the variable selection screen in the BADI implemtentation? If so, how?.
2. In the compute method the assign does not work because the Attributes (p_kyf_ZIMCREDAY, p_cha_0material,p_cha_0calday) are 0 all the time.
How does the attribute get a correct assignment to a component name? See my coding of the define and compute method below.
Thanks and Regards, Mario
IF_EX_RSR_OLAP_BADI~DEFINE
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZD_IMC001'.
l_s_chanm-chanm = '0MATERIAL'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
l_s_chanm-chanm = '0CALDAY'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZIMCREDAY' TO c_t_kyfnm.
ENDCASE.
IF_EX_RSR_OLAP_BADI~COMPUTE
FIELD-SYMBOLS <fs_ZIMCREDAY> TYPE ANY.
FIELD-SYMBOLS <fs_material> TYPE ANY.
FIELD-SYMBOLS : <fs_calday> TYPE ANY.
ASSIGN COMPONENT p_kyf_ZIMCREDAY OF STRUCTURE c_s_data
TO <fs_ZIMCREDAY>.
ASSIGN COMPONENT p_cha_0material OF STRUCTURE c_s_data "p_cha_0material
TO <fs_material>.
ASSIGN COMPONENT p_cha_0calday OF STRUCTURE c_s_data "p_cha_0calday
TO <fs_calday>.

Regarding 1.
I checked in debugging the variable I_TH_SFC in the initialize method, but there is no information regarding the selections in the variable popup.
Can you please explain in detail how to access the variable values.
Regarding 2.
I changed l_s_chanm-mode to rrke_c_mode-no_selection according to your recommendation.
Unfortunately it´s still the same. The attributes still does have the value 0. Therefore the assign does not work correct.
The attributes are defined with type i. But the component names are like 'K____132'. Is this the cause of the problem?
Thanks, Mario

Virtual Key Figure ( Currency Problem)

Hi All,
I am facing one problem in virtual key figure using BADI. Need your help...
Scenario: I have a DSO with all many fields. Requirement is to add one more VKF in DSO to get specific period balance of a GL from 0FIGL_O10 DSO and then display it as a column in Bex report. Added VKF is of type amount and unit/currency 0CURRENCY.
Required Report Format:
Material --- Col1 u2013 Col2 u2013 Col3(VKF)
M1--$4, 00-$140, 00u2014<Balance form 0FIGL_O10 for a period>
Work done so far:
I have added a virtual key figure ZVKF_BAL in my ZSD_O06 of type amount unit/currency as 0CURRENCY. In RSR_OLAP_BADI I have added a new implementation ZVAR_IMPL.
In class ZCL_IM_VAR_IMPL there are total three attributes.
P_KYF_ZVKF_GL u2013 Virtual key figure
P_CHA_0FISCPER u2013 Period is from ZSD_O06 for which we have to get the balance of a fixed GL account from 0FIGL_O10.
Given is the code added in define method:
DATA: l_s_chanm TYPE rrke_s_chanm,
        l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
        <l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZSD_O06'.
    l_s_chanm-chanm = '0FISCPER'.
    l_s_chanm-mode = rrke_c_mode-read.
    APPEND l_s_chanm TO c_t_chanm.
    APPEND 'ZVKF_GL' TO c_t_kyfnm.
ENDCASE.
No code added in initialize method
Given is the code added in compute method:
FIELD-SYMBOLS <fs_ZVKF_GL> TYPE ANY.
FIELD-SYMBOLS <fs_0FISCPER> TYPE ANY.
DATA :LV_FS_ZVKF_GL TYPE /BI0/OIBALANCE,
p_cha_0FISCPER = 8. "ASSINGING POSITIONS TO THE FIELD AS THEY ARE NOT GETTING IT
p_kyf_ZVKF_GL = 16.
ASSIGN COMPONENT p_kyf_ZVKF_GL OF STRUCTURE c_s_data
            TO <fs_ZVKF_GL> .
ASSIGN COMPONENT p_cha_0FISCPER OF STRUCTURE c_s_data
            TO <fs_0FISCPER>.
Customized function module which will calculate the GL Balance.
CALL FUNCTION 'ZGLBALANCE'
    EXPORTING
     FISCPER_I    = <fs_0FISCPER>
     GL_ACCOUNT_I = '0000476000'
    IMPORTING
      BALANCE_O    = LV_FS_ZVKF_GL.
<fs_ZVKF_GL> = LV_FS_ZVKF_GL.
Code of ZGLBALANCE:
DATA: lv0_fiscal type /BI0/OIFISCPER.
DATA : X TYPE I VALUE 0,
types: BEGIN OF ty_/BI0/AFIGL_O1000,
       FISCPER type /BI0/OIFISCPER,
       GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
       BALANCE type /BI0/OIBALANCE,
       CURRENCY TYPE /BI0/OICURRENCY,
        END OF ty_/BI0/AFIGL_O1000.
data: it_/BI0/AFIGL_O1000 type TABLE OF ty_/BI0/AFIGL_O1000, " Internal table
      wa_/BI0/AFIGL_O1000 type ty_/BI0/AFIGL_O1000.          " Work area
select single FISCPER GL_ACCOUNT BALANCE CURRENCY from /BI0/AFIGL_O1000 into CORRESPONDING FIELDS OF TABLE it_/BI0/AFIGL_O1000 where GL_ACCOUNT eq GL_ACCOUNT_I and FISCPER eq FISCPER_I and CURRENCY = 'USD'.
BALANCE_O = X .
Problem:
We are getting the balance values but it is coming with numeral with postfix ERROR.
M1--$4, 00-$140, 00u201412,00 ERROR
M2--$24, 00-$130, 00u201414,00 ERROR
Is it something to do with currency? Please let us know what is worng in code?
If yes please let me know how to get the currency along with the numeric values there in the report.
Thanks & Regards,
Mayank

Hello mayankmishra135,
Were you able to find a solution for this? I am facing the same issue (with the ERROR in the currency field), wuold appreciate your help.
Best regards,
Aleksander Dyl

Virtual Key Figure on Multicube (RSR_OLAP_BADI)

I've created a virtual key figure (using RSR_OLAP_BADI) for number of days in month [zdays_month]. Everything works perfectly when it's used in a query on a cube cube. BUT, when I try to use it in aquery on a multi-cube, it doesn't. The multi-cube query returns a number = the number of days in the month * the number transactions in that month.
Anyone know how I can force the VKF to execute after the data is returned? I would prefer to not mess with exception aggregation, or key figure properties. I need to keep this VERY SIMPLE for my query developers.
Your assistance is greatly appreciated,
Kenneth

hi,
first try to check whether the query access virtual kf or not, use transaction rsrt, type in the query name, and click technical info or properties, there will some line 'virtual char/kf'.
i think the query may never access the code in BadI because in the code it's set with condition infoprovider technical name, it will cover only the infoprovider, when we access query from multiprovider, which join from one of the infoprovider, it's not automatically have the virtual kf/char, we have to specified the multiprovider name in the BadI, you may change the code as following :
hope this helps.
CASE i_s_rkb1d-infocube.
    WHEN '[your infocube name]'.
ENDCASE.
to
IF i_s_rkb1d-infocube = [your infocube name] or
   i_s_rkb1d-infocube = [your multiprovider name].
ENDIF.
for other infoproviders
CASE i_s_rkb1d-infocube.
    WHEN '[other cube name]'
ENDCASE.

Virtual key figure BADI - does not change value

I wrote a badi for virtual key figure according to guidelines from an SDN doc on how to create virtual chars and kf's.
However, the value of the key figure is not changed at all. Below is my code. Please see what I'm doing wrong
method IF_EX_RSR_OLAP_BADI~DEFINE.
   APPEND 'ZRANKS' TO c_t_kyfnm.
endmethod.
method IF_EX_RSR_OLAP_BADI~COMPUTE.
if P_KYF_ZRANKS > 0.
    assign component p_kyf_zranks of structure c_s_data
    to <fs_ranks>.
    <fs_ranks> = '1.0'.
endif.
endmethod.

There is something you need to do which I have not seen described in any of the documention here.
You need to copy the source code for the INITIALIZE method directly from the code given in the example class CL_EXM_IM_RSR_OLAP_BAPI. That is where the P_KYF<object> and P_CHA<object> attributes are assigned their values. If you do not copy this code into your own implementation, these attributes have no value in the COMPUTE method and your code will probably not work.
Bryan

Virtual Key Figures using RSR_OLAP_BADI

Hi gurus,
We have been using the RSR_OLAP_BADI to generate some virtual key figures for our queries, now we have a problem creating a virtual key figure...
We have got 4 key figures in the query, 1 is a normal KF and the last 3 are virtuals, one of the virtuals uses the normal KF and splits it between the total of the same KF. The point here is that the calculations are not coming ok because the COMPUTE method does not bring the information summarized as the KF is defined, because in the same structure of the query ther are some formulas that have the same KF restricted to another level of information.
If we remove from the query this formulas, the virtual KF works perfect because the normal KF is delivering the information summarized.
The question is... is it normal that this happened or there may be something wrong in our definition?
Thanks and best regards to all!!!

Hi,
You can get number of threads in SDN search.
Check in the following blog
IF_EX_RSR_OLAP_BADI~DEFINE
https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6776739
https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6788064
http://sapbikk.blogspot.com/2008/05/writing-virtual-characteristics-or-key.html
Thanks
Reddy
Edited by: Surendra Reddy on Mar 18, 2009 4:29 AM

Programs that require a network connection won't work because there is no virtual IP address available for this session.

Programs that require a network connection won't work because there is no virtual IP address available for this session. Per application IP virtualization is enabled.
There are in fact available IP address's within the dhcp scope. Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

Hi,
Thank you for posting in Windows Server Forum.
As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
Application Compatibility – Turn on Remote Desktop IP virtualization
Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
configuration of the next setting.
Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
mask using the slash notation, for example 192.168.77.201/24.
Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
More information:
Microsoft RDS Policies explained (Part 2)
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
Configuring Remote Desktop IP Virtualization II
http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Calculating count of orders using virtual key figures

Hi All,
In my report, i need a counter for the number of distinct orders.
1ROWCOUNT didnt work for me as i want the count of distinct orders alone.
I am planning to use virtual key figure for this..
However, i donno how to code this in ZXRSRU02 and ZXRSRZZZ.
Any help on this would be great!!
Thanks!
- Arun KK

Shana,
I dont understand your question.
I'll give an eg.
this is how the cube is.
Order | Desc | Location
101 |   'X' | loc01
101 |   'X' | loc02
102 |   'Y' | loc01
103 |   'Z' | loc01
102 |   'Y' | loc02
in the report, i need the o/p to be.
Order | Desc | count
101 |   'X' | 1
102 |   'Y' | 1
103 |   'Z' | 1
i cant use 1rowcount as that counts each row and not the service orders.
Hope this answers your question.
Please let me know if there is a solution for this.
Thanks!
~ Arun KK

Virtual Key figures and Chars

Can someone explain me what are virtual key figures and how to populate data for them.
Regards
Kunal

AHP,
Thanks for the help, one last question, i posted same on sdn week back, there was no proper response. I have standard LO datasource and enhanced with around 25 fields, the major problem is none of these fields are delta capable and they are coming from 13 diff tables, with great difficulty i could tie the relation between them. Most of the fields change and none them are picked,
is there anyway i can write a program for all this fields for delta enabling. The last option which iam left is to load the data every week as full load though data volume is less, which is not practiced.
Regards
Kunal

Is there a *Signed* Virtual Key application

Similar Messages

Maybe you are looking for

Is there a Signed Virtual Key application