Is there a SL backtrack to 10.5.8?

Does anyone know how to back out of Snow Leopard to 10.5.8?

If you don't have a backup, then you also could do an archive and install of Leo over Sno. The installation probably will not be the greatest, but it might be viable. If you need something from a prior user's folder after archiving and installing, then use [these instructions|http://support.apple.com/kb/HT2196]. They are important because your Leo DVD may not let you preserve user and network settings. Here is another read about [using archive and install|http://support.apple.com/kb/HT1710]. Note that Apple does not approve of archiving and installing nearly this far back. I emphasize that an archive and install may not lead to a satisfactory system.

Similar Messages

  • How do I roll a ball along both x and y axis?

    I am trying to roll a 2D ball in 3D space that only moves on the x and y axis through a maze. I would like it to be rotating 360 degrees based on the curcumference so it looks like it is rolling no matter if it is moving along the x or y axis. I feel like it should be pretty straight forward to figure this out but I am at a loss.
    The ball rolls through the maze in an expressive way not at a constant speed but always in a straight line. Not every keyframe is at a corner direction change which makes things more difficult. I am just starting to learn about expressions so much of this is not based on knowing just forum searching and through trial and error.
    https://vimeo.com/89638507
    I have tried multiple variations on these three directions:
    distance=position[0,1];
    circumference=width*Math.PI;
    distance/circumference*360;
    This moves fine along the y axis or x axis.
    (length(position,position.value_at_time(0)[0,1])/(width*Math.PI))*360
    This works fine when moving on the y axis but the x axis rotates too slowly and then about 12 seconds in it stops completely and goes haywire after that.
    ball = thisComp.layer("Ball").transform.position;
    s1 = ball.velocityAtTime( time )[0];
    s2 = ball.velocityAtTime( time )[1];
    circumference=width*Math.PI;
    if
    (s1 > 1 || s1 < 1)
              transform.position[0]/circumference*360;
    if
      (s2 > 1 || s2 < 1)
              transform.position[0]/circumference*360;
    I was hoping I could switch from x axis to y axis when it's velocity slows at every corner. Only rotates when moving along y axis.
    I am not sure if it is possible or if there is a simple way that I don't know about (which is probably the case).
    Thanks in advance

    I think your expression is going to need to loop through all previous keyframes and add up the distances traveled (I'd use length() to calculate each distance) between each pair of keyframes and then add the distance traveled from the most recent keyframe to the current time. Then you can use your circumference formula to calculate the total angle. That assumes that there's no backtracking (wheel always turning in same direction)--otherwise, it will be more complicated.
    Dan

  • Is there a major resource (memory) conflict between AdBlock addon and Peerblock?

    Sorry this is so long. I just downloaded FF 3.6.3 for Windows last night and added the NoScripts and Adblock addons while concurrently running Peerblock. Within a few minutes my entire system went haywire, more precisely a complete system failure. I/O, CMOS, IDEport2, ACPI, everything went haywire. The mouse and the cursor became unusable, it was as though someone was mashing on buttons or clicking repeatedly. When I tried to open FF again it literally opened more than a hundred terminals. Right click completely failed because it immediately closed. I couldn't use any programs or type anything anywhere on my system. This behavior persisted even when I booted into BackTrack 4 and even under BIOS. The entire system literally became unusable. Then I wasn't able to even make it past the splash screen in most instances. During boot this was accompanied by constant beeps. I was able to gather some information, but not much before the complete insanity. I did see in FF something about a corrupted module. Peerblock also generated an error report indicating I/O errors but because of the nature of this problem I wasn't able to really view or record either one. There were tons of ACPI and other errors in EventViewer under Windows while all this was occurring. More errors than I had ever seen before. Finally my system wouldn't even boot unless I left it alone for some time. I also noticed excessive heat. Finally Windows prompted me, after removing and reseating the RAM, to the repair console. It found zero errors, absolutely nothing, generating 0x0 errors for everything. but did indicate that it located the root source of the problem. When it started up both FF and Peerblock had been removed. Everything else was fine. I'm using the system now without a single problem. I've been using Peerblock for more than six mos. without any issues. FF runs beautifully under BackTrack 4. It appears to me this was a memory conflict of some nature that corrupted the CMOS or some other memory modules, but I'm not that savvy. I would like to continue using both these programs with Windows but if it's not possible; it's not possible. I'm not crazy and won't be installing and using both these programs together again. This was the most serious problem I've ever encountered, worse than any virus. Also, let me assure you this was not a virus. Since I've gotten back on my system I've run three different AV engines. I am willing to try FF, with AdBlock of course, again and update how it goes. I may even try the alpha5. I know your busy, but please help if you can. Any feedback or help would be greatly appreciated. I will continue to support the Mozilla community regardless of this issue.
    -Regards
    == This happened ==
    Every time Firefox opened
    == As soon as I used FF for windows.

    I have a new computer and have had problems with just about everything there is to have problems with. I chose FireFox over IE because I just plain like it better. I am at a loss as to what to do with the Error Console. It is full of errors, and I am afraid to use my computer because it may crash. I had to remove my MicroTrend Security System because of all the problems with downloads. I really have never seen any such disgusting things before from a computer. Perhaps I downloaded too many addons. But isn't that what they are for? If not, why not make a simple product with no add-ons that will work efficiently. I know I would buy one. This is a beautiful computer with a huge screen that can also be a TV, but what is the use if the Browsers are all fighting with one another and cannot get along. Worse than our World. Lets get all get along and try to get what everyone would like. We are not all NERDS, although I wish I were right at this moment. I wish some wonderful nerd would email me and take over my computer and take out what I don't need and add in what I do. There is a terrific idea for some brilliant NERD.
    I am desperate here in New York State, USA and need help NOW.
    Thanks to all. I hope Firefox will send us out a Great Big Power Patch to fix all the ills of 3.6.3. I thought this might be the one. It surely sounded great. Thanks, Elizabeth

  • Urgent-Backtracking of G/L in MIRO

    Hi
    Can anybody tell me how can I backtrack that from where G/ls are captured when we do "Simulate" in MIRO.
    I want to backtrack G/L of cenvat clearing acct.
    So from where should I get G/ls which are captured in MIRO.

    Hi,
    JUST get into Invoice Tab in to PO line item, Tax details, check for Acct hey there, for this key check the G/L account settings in txn : OB40
    Rgds
    Dheeraj

  • With older imacs, is there a point when you SHOULDN'T upgrade to latest OS?

    I may have worded that poorly but basically what I'm after is this: I know Apple lists the compatible Macs going back X number of years with each OS update, but is there a point where one is better off staying put with say Mountain Lion on iMac 21.5 Late 2009 (12GB RAM) vs. updating to Mavericks and eventually Yosemite.  Obviously, the newer the machine the better apt it is to take advantage of the newer OS, however will taking on latest OS actually slow down an old Mac?  Is this making any sense?

    I disagree. My 2009 MacBook ran Mavericks very well. Better, gasp, than Snow Leopard.
    Mavericks is designed to be more efficient than previous OSes and should run well on the hardware that Apple says will support it.
    If you're alrady running Mavericks, I wouldn't downgrade. As you guess, you'll have problems with existing apps you've installed that may not work with 10.6. Not to mention the lack of security updates. You'll be exposing yourself to all sorts of known vulnerabilities by downgrading.
    Stay are you are. You might not see the value in upgrading to Yosemite, but I wouldn't backtrack now.

  • Is there any way to uninstall iOS8.3? It's taking up so much space on my phone.

    Is there any way to uninstall iOS 8.3? It's taking up a crazy amount of space on my phone. I keep getting the storage almost full updates, but I have a 32go phone. All my apps and camera Roll oonly use 6gb of storage. Where did the rest of it go?!!

    In order to free up space, you might try restoring the phone as new (but you'll still have 8.3...no way to backtrack on that).  You'll have to offload your photos somewhere before doing this, as they'll be wiped, along with your contacts, messages, emails, etc.  But as a last resort, this should take you back to the storage space you had when you bought it.  Someone with more knowledge may know of a better way to free up space.  As I understand it, 8.3 doesn't take appreciably more space than 8.2, so I doubt that's your problem.

  • Aperture 3 - is there a history window?

    I added some changes with the Dodge tool but wanted to remove it from a specific area. Is there a history tool like in Photoshop when I can backtrack my steps? (The undo command won't work as I need some of my adjustments).

    No
    Just brush away the Dodge tool where you don't want it: Click on the eraser in the dodge HUD or hold the option key while brushing.
    the History panel would be less flexible for this task.
    DLS
    Also click on the cog in the Dodge HUD and choose color overlay to see exactly where your stokes are.
    Message was edited by: MacDLS

  • Yamaha Keyboard backtracks help

    Hi,
    I can not get the backtracks to play as is when I hook up my USB. I have track info come up and it will change the sounds to lots of great things but I want it to record as is with no changes. Help!!!

    Sorry about not being clear. I have the Yamaha DGX 505. Currently, I have it hooked up directly using the usb connection. At this point, when I play anything on the keyboard it comes into garage band but does not sound the same. I want it to sounds just as it did on the keyboard. We have a tascam that I have hooked my mic up to and then the tascam has a usb which is connected to the computer and that works well. I am wondering if I need to run it through there instead of going directly into the keyboard. I am just looking for the authentic sound not wanting to change it to sound like strings etc. when it is played from the piano.

  • Is there a way to open two months at the same time in iCal?

    I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
    Thanks!

    Hi,
    If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
    Best wishes
    John M

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way of getting a "schedule view" in iCal on a mac and on iPad in the same way you can get one on iPhone?

    IS there a way to get a schedule view of events on a busy day in iCal on the iPad 2 Air and on the Macbook Pro?  I can get this view on an iPhone.

    I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web.
    If you put your info into the computer and hand it to another, you have to assume they will copy everything.
    Why are you putting scanned copies of valuable identity information into a computer than can be hacked, stolen, lost or compromised by a dirty tech?
    Have you lost your mind?
    Is there a way of finding out what activity has taken place whilst they've had it in their possession?
    No. The tech would just deny it if he did, or tell the truth which the answer would be "NO" in either case.
    The employer won't ask that sort of questions without solid proof, less they make a enemy of the employee and/or risk being sued for defamation of character.
    It's not like they bother to have a team of people watching over his shoulder that he doesn't stick a USB thumb drive of your data into his pocket to take home.
    I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks)
    If it's iTunes music, it has your personal ID embedded into the song files. Most IT techs know this though.
    I appreciate any advice you guys can offer.
    Too late now, all you can do is not worry about it.
    Take your personal info out of the machine and if you need it, burn cd/dvd copies, a few USB thumb drives, Iron Keys or self encrypting external storage drives with key and/or keypad.

  • Is there a way to create a year at a glance with detail and print?

    Is there a way to create a year at a glance with detail and print?

    To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
    Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
    Acrobat 9: Advanced > Extend Features in Adobe Reader
    Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
    Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
    I wonder what it will be next time?

  • Can there be multiple apple ids on one account?

    I want to share my iTunes account with my daughter so that she can download and update apps on her iphone, but I don't like that she needs to use my apple id and password, which could give her access to my email. She doesn't realize this yet, but it's only a matter of time. Is there any way to give her her own apple id, connected to my account?

    Never mind; I believe I found my answer - in a nutshell, everyone needs their own apple accounts and ids.
    Now, is there any way to delete a previously asked question such as this?

  • Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses. 

  • In order to create space on my MBA I just bumped iTunes media to G drive linked through Time Capsule.  Now pointed iTunes at new iTunes libary on G drive and, even though all music files are there, iTunes can only 'see' 10 albums. Any help appreciated.

    Bit more detail...
    Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely.  This didnt' work.  I took it into the Genius bar and the genius there told me that time capsule is not designed for anything other than back up.  Instead I have to connect a G drive through the time capsule's wireless router to my MBA. 
    I followed his instructions - moved my files from the Time Capsule and MBA directly onto the G Drive - which took a heartening 2 hrs so something must have been happening - and the held down 'Alt' when starting iTunes and selected the new itunes folder as the location of my itunes libarary which I wanted iTunes to 'point at'.  When I opened iTunes only 10 albums are visible now.
    In ITunes advanced preferences it says it is pointing at the correct folder.  The files are all cleary there when I open the G Drive folder to take a look.  But I cannot get iTunes to find them.
    Any suggestions? 
    Secondary challenge - in spite of deleting the original itunes folder on my MBA I still get messages pop up telling me my start up disk is out of space and I need to clear some - I expected to stop getting this message now I had done this exercise above.  I have emptied Trash.  Again - any pointers appreciated.  I am new to this world of 'intuitive' macbooks.
    Cheers

    After admittedly only a quick read the one thing you don't say is how you are trying to make this move.  Most people with moving library issues do it the wrong way.  Plenty of web sites tell you how to do it the wrong way.
    If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

Maybe you are looking for