Is there a string comparasion function?

I want to compare a list of strings to see wether they are the same or not. for example: If they are the same then I should do this and if they aren't then I should do that. Is there any such function in labview?

How about using the "=" function in comparison pallete?
as it is a polymorphic function.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Similar Messages

How to know the no. of bytes in a String Control Function?

Hi,
I would like to know the no. of bytes for a certain String Control Data.
For instance, if i have a String Length Function, on the left is a String Control and on the right is a Length Indicator.
If i will type coordinates, i.e. 9.25,4.25 on the String Control it will show 9 on the Length Indicator. I think 9 do not mean 9 bytes but
only a length. Is there any function in LV that will tell me the total bytes of the data on the string control?
Appreciate for any advise.
Thanks a lot.

Thanks tst for your kind reply.
Here is what i am trying to find/goal.
I will be using wireless receiver for my system. The wireless receiver have some signal strength ranges; 95dbm @ 1Mbps (mega bit per sec), 90dbm @ 11Mbps, 82 dbm @ 24 Mbps and 75dbm @ 54 Mbps. Ofcourse i prefer to have lower data transfer rate so that my signal strength is best.
I will be sending coordinate data/s via wireless communication using string controls. But i do not know how big/heavy is my coordinate data
If i can know how many bytes or mega bytes the data i want to send then i will be able to transfer it to bits or mega bits(8 bits = 1 byte) thus i will know which setting i can use for the wireless receiver. And if the data is too big then i have a basis to redesign my data transfer to suite a better signal strength.
Thanks for your help.

Pad leading zeros in a string.Format function

How could use the string.Format function and in the format text pad a leading zero?
Pseudo code is:
string parm = “5”;
string format = “Some number formatted as 3 dig: Format({0}, 000)”;
string output = string.Format(format, parm);
Where the output would look like this:
“Some number formatted as 3 dig: 005”
Thanks.

Thanks everyone. Unfortuantly there's a constraint where the padding operation needs to be embedded in the format string. This entire operatin is being put together dynamically where the format strings are being pulled from a library of format strings stored
in a database. at runtime we don't know how which format will be used and how many parameters will be passed in. we have logic to handle the unknown number of paramters as there is metadata which helps us with that.
the need for leading zeros needs to be part of the overall format defined in the format string. for example, a real format string stored in the database looks like this:
"LINE_NO = '{0}', AND GEO_LOCATION = 'T{1}, {2}, R{3}, {4}, , Sec. {5}'"
and its output from the string.Function is:
"LINE_NO = 'TG-G2469', AND GEO_LOCATION = 'T155, N, R93, W, , Sec. 5'"
the last parameter (param 5) had a value of 5. In another case the output requirement might need to look like this:
"LINE_NO = 'TG-G2469', AND GEO_LOCATION = 'T155, N, R93, W, , Sec. 05'"
note the "05" at the end...
the logic of using the leading zero needs to be embedded in the overall format string text.
Thank you.

Simple String Compression Functions

Hi all !
I need two simple String compression functions, like
String compress(String what)
and
String decompress(String what)
myString.equals(decompress(compress(myString)))
should result in true.
Primarily I want to encode some plain text Strings so they are not too easy to read, and compression would be a nice feature here.
I already tried the util.zip package, but that one seems to need streams, I simply need Strings.
Any ideas ??
thx
Skippy

It does not do any compression, in fact it does
expansion to better encrypt the string (about 50%).How does that work? You want encryption to
decrease entropy.Why in the world do you say that, pjt33? What a very odd statement indeed. I sure hope you don't work in security, or I do hope you work in security if I'm a bad guy, or a competitor.
Let's say you had a 6-character string you wanted to encrypt.
Well, if you didn't increase the entropy, any 6-character plaintext string would have a 6-character encoded equivalent. And if you decreased entropy (e.g. coding the most commonly used words to shorter strings,) it gets even easier to decrypt.
Presumably there would be no hash collisions, after all, you want this to be reversible.
Hash collisions decrease entropy too, and, by doing so, make it easier to find a plaintext string that happens to hash to a certain value. This is a Bad Thing.
Now, to decode this, the Bad Guy only has to consider the set of 6-character strings and their hash values. You could even precalculate all of the common dictionary words, and everything with common letters and punctuation, making decryption virtually instantaneous. Especially if you had decreased the entropy in the signal, making fewer things I had to try.
But somebody who increased the entropy of their signal by adding random bits and increasing the encrypted size of the message to, say, 64 characters, would make it a lot harder to decrypt.
The ideal encryption system is pure noise; pure randomized entropy. An indecipherable wall of 0 and 1 seemingly generated at random. Statistical methods can't be used against it; nothing can be deciphered from it; it's as decipherable and meaningless as radio hiss. Now that's encryption!

Typecasting String to Function in AS3

Hi,
I would like to typecast a String to Function. The following is the code snippet,
var
var funcionVar:Function = functionName as Function;
bt.addEventListener(MouseEvent.CLICK,funcionVar);
public function onSearch(event:MouseEvent) {
// Code here
While converting String to Function, it is returning null value. Is there any possible ways to achieve this?
Thanks,
Srinivasan S
functionName:String = "onSearch" ;

This is the code snippet,
var functionName:String = "onSearch";
var funcionVar:Function = functionName as Function;
bt.addEventListener(MouseEvent.CLICK,funcionVar);
public function onSearch(event:MouseEvent) {
// Code here
Could you please help to resolve this?
Thanks,
Srinivasan S

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
It's not the best solution but it helps (of course, if you have a Mac!)

Is there a BAPI or Function module can create a Customer Master record?

Hi experts,
In SE37, Is there a BAPI or Function module can create a Customer Master record?
Regards

BAPI_CUSTOMER_CREATEFROMDATA1
also see this thread.
Re: Create customer record in SAP via BAPI
кu03B1ятu03B9к

Module pool / Screen Prog is there any standard SAP functionality ?

Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?

No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman

Is there a page down function for the front panel?

I have a front panel on two monitor pages. Is there a function which shows the second page when I press a button on the first page and then switches back to the first page when a loop starts over again? Is there additionally a print function which prints then only the second front panel?
Thank you very much for answering these questions.

Are these two separate VIs ? If so, then you can open a VI reference, then use it an Invoke Node to modify the properties for the Open FP method. This would allow you to hide, minimize, or unhide the VI.

Is there a cap lock function on the iPod touch?

Is there a cap lock function on the i-pod touch? I don't see a way to do it.

Hello mdgm,
First ensure that Caps Lock is enabled by going to *Settings > General > Keyboard > Enable Caps Lock*.
When this feature is enabled, you can then use Caps Lock by double-tapping the Shift key on the keyboard.
B-rock

Is there a call block function for the iPhone 4S?

Is there a call block function for the iPhone 4S? If not, will it be offered in the future? what else can I do to the phishing calls?

No.
Apple has not said.
Don't answer your phone.

Is there a Ripple-"cut" function in FCE?

Hi-
This is something I have been battling for a while. I am pretty sure no such thing exists, but here goes:
In the past, when I have simply wanted to move one clip to another place in the timeline, I have had to
+1. copy it+
+2. Ripple delete it+
+3. Paste insert it where I wanted it to go.+
So here are the questions:
*1. Is there a "Ripple-cut" function in FCE that ripple-deletes the clip while copying it to be pasted later?*
*2. If not, is there a better workflow for the process than the one described above?*

Thanks Tom,
Sorry for doling out answer points so quickly, I merely assumed that since it wasn't in one of the top menus it didn't exist. I then found out that ripple-delete wasn't in the top menus either, but of course it exists!
Just tried the ripple-cut, and of course it worked. Thanks again Tom, sorry for being so hasty to declare my question solved!
Is there a good site you know of where I could see more of these shortcuts that aren't mentioned in the menus?
P.S. If you ever do another reprint of your book, this might be something to consider adding, since it seems like such a basic requirement! (moving things within the timeline effectively is an important skill to have)

Is there a spell check function in iCloud pages? Doesn't seem to be.

Is there a spell check function in iCloud pages? Doesn't seem to be.

Select the spanner > Settings > Check Spelling.

Is there a string comparasion function?

Similar Messages

Maybe you are looking for