Is there a way to hide the cursor or change the cursor to a hand?

Hi,
I think the title is self explanatory. The reason I want to do it is because I'm developing a touchscreen interface and I reckon it would look better if I had a hand instead of a cursor or if I got rid of the cursor completely.
Cheers,
elmicko

Yeah theres a way.
Use method
setCursor(Cursor.getPredefinedCursor(Cursor.HAND_CURSOR));
ciao

Similar Messages

  • Is there a way to hide some reports based on the selected values in prompt.

    Hi Experts,
    Is there a way to hide some reports based on the selected values in prompt.
    For ex. if a year is selected in the prompt then the report should display year wise report.
    If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
    Regards
    Ashish

    Hi,
    Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
    create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
    Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
    Use four sections.
    Section1-Place report that should come when only year.
    section2-Place report that should come for year and halfyear.
    Section3-Place report that should come for year,halfyear and qtr.
    Section4-Place report that should come for year,halfyear,qtr and month.
    Apply guided navigation for each section selecting guided navigation-
    For section1-
    properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
    In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
    Thanks,
    Srikanth
    http://bintelligencegroup.wordpress.com/

  • Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

    Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

    Hi! You can't do it without jailbraek. And I offer you "don't try it"!

  • Is there a way to hide my Skype info from the publ...

    The reason I wish to do so is because I've been reciving an influx of of people wanting to find people to talk to, and have been sending me friend requests. However, I have no interest of talking to anyone who I have not met, unless it's from either a website I know and use, or have given written permission and my contact details. I do not like random friend requests at all, and I find it suspicious they all identify as female, and I am male. I do not wish to be bothered by such things, and so I ask if there is a way to somehow maybe hide myself from the directory, and if not, maybe such a feature should be added. I know the directory is what you need to search to find anyone, but there should be a more direct way when you have the Skype name. It may make it harder for friends and family to find a person, however, if I really want people added to my Skype, I will give them my info. It was a wonderful feature, however there are those who wish to abuse it, and something must be done, as this problem will not be going away!
    So far, I've been blocking the people, but this is the 5th time it's happened in the last 2 weeks, and I'm getting rather concerned that just anyone can find me, and add them in. I use Skype to communicate with my friends and family, not find and talk to complete strangers. I am also concerned that this issue is just the tip of the iceburg, as people younger then 18 can also get a Skype account, and could be extorted by people wishing to harm our youths. I am not trying to be a "white knight", but rather a responsible citizen wanting to help make the community safe for all who are in it. I do not ask for immediate changes, but rather for help as to temporary fixes, and the consideration of features that could help protect people who choose to use them.

    If you currently have personal data in Thunderbird, the safest thing to do is to use the ImportExportTools add-on. See the second link if you need more detailed usage instructions than those provided in the description.
    * https://addons.mozilla.org/thunderbird/addon/importexporttools/
    * http://kb.mozillazine.org/Importing_folders
    If you need to transfer other data besides mail, see the following article.
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
    If you don't have any personal data in Thunderbird at the moment, then you can simply replace everything in your current profile with data from your old profile:
    # Click the '''≡''' menu icon in the top right.
    # Open the '''Help''' menu and choose '''Troubleshooting Information'''.
    # Click the '''Show Folder''' button. This opens a Windows Explorer window with your current profile.
    # Click the '''≡''' menu icon and choose '''Exit'''.
    # Create a backup copy of your current profile folder.
    # Select all files in your current profile folder ('''Ctrl+A'''), then press the '''Delete''' key to erase them.
    # Open a new Windows Explorer window and navigate to your old profile folder.
    # Copy all files and subfolders from the old profile folder into the current one.
    You're welcome.

  • TS1398 my password for my wiifi on my ipod touch isnt working for some reason, i tried all my passwords and nothing is working, i never had a problem before please help. is there a way to somehow recover it or change the password.

    i have an ipod touch and my password for wiifi isnt working? i never had a problem with this before is there a way u can recover or change it? also my music is stuck in a folder on my computer and will not let me sync or add it back to my ipod. am i going to have to download all my music cds back on it? also purchased some music from iunes and its not showing up on my ipod either.

    For music problem:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.
    For wifi
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Is there a way to keep my child from changing the passcode I set up on his iPhone4? If not, how can I gain access to his phone if he refuses to tell me the passcode?

    He has an iPhone 4 running iOS 7.1.2. When setting up restrictions on his phone, there is no option to disable changing the passcode. He is very deceitful and has changed the passcode on it before, which resulted in me having to do a factory restore. I want to be able to see what he's looking at and doing on it.

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • Is there a way to hide sheets from view in the sheets pane?

    I cannot seem to figure out how to hide sheets in a file. I converted my monthly budget and forecast file from excel but I do not want to see all the history from previous months (which were arranged in tabs in an excel work book). Thanks in advance.

    Here's a thread in Feedback about Discussions with the information you need.
    I use InstantShot or Screenshot Plus Widget to capture the pictures & then GraphicConverter to crop & re-save them (you could use Preview). I have to use InstantShot timed screen for menus & to display Pages inspector properly. I use my iDisk for hosting the pictures.

  • Is there any way to decrease latency other than changing the I/O buffer

    Hello,
    I'm recording with two presonus firepods linked together. which allow for me to record up to 16 track at a time. I'm noticing some latency that makes it somewhat hard to record with. I do not want to lower the buffer for fear of intruducing distortion. is there any other way to lower latency levels in logic? If not would switching to a different interface help? if so, which one can you recamend?
    thanks

    After you've determined the smallest possible buffer setting for your system to run properly, the easiest way to achieve a minimal latency system from that point on is to have an external mixer for monitoring the audio you're recording. This way you're don't have to monitor audio thru your DAW software.
    Apparently, software monitoring latencies are getting better (see the extensive thread/debate about the Symphony system on this forum -- search for "Symphony"). The only reason you'd need to use software monitoring is if you use plug-ins on the input channel(s) of what you're recording. Otherwise, software monitoring of audio thru your DAW does nothing but add latency (delay) to your monitored signal, as well as cause you to go prematurely gray in trying to deal with it.
    I believe the Firepods are FW devices, and if so, there could be not only an increased amount of latency over, say, PCI-based systems, but the amount of latency might be variable every time you boot your system (there are extensive threads about this phenomenon on this forum -- do a search and you'll find them). If you're experiencing this, it is probably due, in short, to problems with the way the FW drivers are written.
    I have a PCI-based system (MOTU, PCI-e 424) and putting arguments over whether MOTU stuff sounds the same, better, or worse than any other audio interface, this kind of system never experiences random changes in latency.
    The other thing you must do is calibrate your recording delay. Again, with certain FW systems you might have to do this each time you boot your system. But I can tell you that with the card-based system I'm using, my latency and hence my recording delay settings never change, and I can be assured that what I record plays back in exactly the right spot every time.
    BTW, the recording delay can be adjusted by using a simple looback test (again, there are numerous threads on this forum which explain how this is accomplished).

  • Changing the speed of the movie without changing the pitch

    Hi,
    Is there a way to create a movie and change the speed of the movie without changing the pitch of the audio??
    Thanks in advance.

    I think, this is a two-(many?)-step process, because 'speeding up' is allways pitching audio...
    so... my workflow would be:
    * extract audio from clip
    * speed up video
    * export audio (Quicktime/Expert/aiff
    * use any audio app which allows pitching (Amazing Slowdowner, Audacity...), change speed/pich
    * import back into iM....
    probably a little tricky to find the right, sync settings... but you asked for a very .. 'advanced' effect ...

  • Is there a way to hide apps from the app store? I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps! I can hide them from "purchased apps", but they still show up when browsing for new apps!

    Is there a way to hide apps from the app store?
    I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
    I can hide them from "purchased apps", but  they still show up when browsing for new apps!
    Is there a way to hide them so that my kids will never see them when looking for new apps?

    Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
    You could change your iTunes account such that they cannot access it in order to buy or download apps.

  • Is there a way to hide the reading pane in iPad mail after a message is read?

    Is there a way to hide the reading pane in iPad mail after a message is read?

    Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

  • I don't want to show the e-mail address in the "from" line when I send out e-mails.  Is there a way to hide that? Thank you!

    I don't want to show the e-mail address in the "from" line when I send out e-mails.  Is there a way to hide that?
    Thank you!

    No.

  • Is there a way to hide the name of the sender of a text message?

    Is there a way to hide the name of the sender of a text message?

    If the sender's name is not in your Contacts only the number will be shown, not the name.

  • Is there a way to hide the SSID?

    On my old Linksys router I could choose to not broadcast the SSID as a form of added security (a hacker won't hack what he doesn't know exists). Instead of it showing up in the list of available networks, you had to type it in manually.
    It finally broke and I bought an AirPort Extreme which I just set up a few minutes ago. Created a new network, new password, etc. But there doesn't seem to be an option to not broadcast the SSID that I could see.
    Is there any way to hide the SSID from people looking for available networks?

    Eric wrote:
    Is there any way to hide the SSID from people looking for available networks?
    yes.
    launch *airport utility* and enter +manual setup+ for your device. go to the wireless tab and click on +wireless options+. find the check box for +create a closed network+ and update the AEBS.
    edit: don't be fooled, though. clients connected to a hidden (closed) network still broadcast the SSID openly. there are a number of freely available tools out there that can pick up a hidden network in a snap.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Is there a way to hide buddy icon/picture in messages? [In the left section that lists all chats]

    Is there a way to hide buddy avatars/pictures from Messages?  I don't mean in a the chat window, but in the left section that lists all active conversations.  I don't really use pictures with contacts, so all I see are gray faces.
    Using Messages 8.0 on Mavericks.

    Hi,
    The answer is No.
    Whilst the App can also use Buddy list (See Window Menu) for accounts which use AIM, Jabber or Yahoo an important part of these is the Buddy Pic.
    By default Messages in the iMessages account will send the My Card pic from the Contacts app for yourself.
    (if you have Buddy Lists  and change the pic for them, then it will send that pic)
    Also if you drag the side bar in the Chat (main Messages window) to it's smallest setting (move the divider to the left) you are left with just the Sender's pic (or lack of it) in  square spot that has no version of the last iMessages sent.
    9:30 pm      Tuesday; August 12, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Is there any way to hide the column header in BW workbook?

    I have inserted a query into a workbook. But I don't want the column header to be shown. Is there any way to hide the column header? Thanks.

    Hi,
    If you want to do any custom formatting to the workbook and you do not want it to reset when you refresh the workbook,
    You will have to You can deactivate the function for adjusting the formatting (Adjust Formatting after Refreshing) in the Display Options of the Query Properties.
    When you do this, you can have your own formatting for the workbook and it will not be affected when you refresh the workbook.
    Regards,
    Joe

Maybe you are looking for