Is there a way to improve on the microphone sensitivity?

the microphone on my iPad2 can be hardly heard over Skype or Facetime calls. anyone had similar problems? is there a way to change the microphone sensitivity?

You need a better mic like the one from Blue:
http://www.bluemic.com/mikeyforipod/#/desc/

Similar Messages

Is there a way to turn on the microphone?

Or is the fact that my Playbook can't record sound mean it's not working?

Voice notes working fine

HT201822 Is there a way to improve Apple's default "ignore accidental trackpad input" function?

I find I frequently end up typing in the wrong place and/or deleting text because the size of the trackpad leads me to touch it accidentally, usually with my right hand below the thumb. Is there any way to improve on the built in function in Lion?

http://www.apple.com/feedback/macosx.html

Is There any way to improve the performance on this code

Hi all can any one tell me how to improve the performance of this below code.
Actually i need to calculate opening balance of gl account so instead of using bseg am using bsis
So is there any way to improve this code performance.
Any help would be appreciated.
REPORT ZTEMP5 NO STANDARD PAGE HEADING LINE-SIZE 190.
data: begin of collect occurs 0,
       MONAT TYPE MONAT,
       HKONT TYPE HKONT,
       BELNR TYPE BELNR_D,
       BUDAT TYPE BUDAT,
       WRBTR TYPE WRBTR,
       SHKZG TYPE SHKZG,
       SGTXT TYPE SGTXT,
       AUFNR TYPE AUFNR_NEU,
       TOT   LIKE BSIS-WRBTR,
end of collect.
TYPES: BEGIN OF TY_BSIS,
       MONAT TYPE MONAT,
       HKONT TYPE HKONT,
       BELNR TYPE BELNR_D,
       BUDAT TYPE BUDAT,
       WRBTR TYPE WRBTR,
       SHKZG TYPE SHKZG,
       SGTXT TYPE SGTXT,
       AUFNR TYPE AUFNR_NEU,
END OF TY_BSIS.
DATA: IT_BSIS TYPE TABLE OF TY_BSIS,
      WA_BSIS TYPE TY_BSIS.
DATA: TOT TYPE WRBTR,
      SUMA TYPE WRBTR,
      VALUE TYPE WRBTR,
      VALUE1 TYPE WRBTR.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
PARAMETERS: S_HKONT LIKE WA_BSIS-HKONT DEFAULT '0001460002' .
SELECT-OPTIONS: S_BUDAT FOR WA_BSIS-BUDAT,
                S_AUFNR FOR WA_BSIS-AUFNR DEFAULT '200020',
                S_BELNR FOR WA_BSIS-BELNR.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'S_HKONT'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
SELECT MONAT
         HKONT
         BELNR
         BUDAT
         WRBTR
         SHKZG
         SGTXT
         AUFNR
         FROM BSIS
         INTO TABLE IT_BSIS
         WHERE HKONT EQ S_HKONT
         AND   BELNR IN S_BELNR
         AND   BUDAT IN S_BUDAT
         AND   AUFNR IN S_AUFNR.
* if sy-subrc <> 0.
*    message 'No Data' type 'I'.
* endif.
SELECT SUM( WRBTR )
         FROM BSIS
         INTO COLLECT-TOT
         WHERE HKONT EQ S_HKONT
         AND BUDAT < S_BUDAT-LOW
         AND AUFNR IN S_AUFNR.
END-OF-SELECTION.
CLEAR: S_BUDAT, S_AUFNR, S_BELNR, S_HKONT.
LOOP AT IT_BSIS INTO WA_BSIS.
IF wa_bsis-SHKZG = 'H'.
   wa_bsis-WRBTR = 0 - wa_bsis-WRBTR.
ENDIF.
    collect-MONAT = wa_bsis-monat.
    collect-HKONT = wa_bsis-hkont.
    collect-BELNR = wa_bsis-belnr.
    collect-BUDAT = wa_bsis-budat.
    collect-WRBTR = wa_bsis-wrbtr.
    collect-SHKZG = wa_bsis-shkzg.
    collect-SGTXT = wa_bsis-sgtxt.
    collect-AUFNR = wa_bsis-aufnr.
    collect collect into collect.
    CLEAR: COLLECT, WA_BSIS.
ENDLOOP.
LOOP AT COLLECT.
    AT end of HKONT.
      WRITE:/65 'OpeningBalance',
             85 collect-tot.
      skip 1.
    ENDAT.
    WRITE:/06 COLLECT-BELNR,
           22 COLLECT-BUDAT,
           32 COLLECT-WRBTR,
           54 COLLECT-SGTXT.
    AT end of MONAT.
      SUM.
      WRITE:/ COLLECT-MONAT COLOR 1.
      WRITE:32 COLLECT-WRBTR COLOR 1.
      VALUE = COLLECT-WRBTR.
      SKIP 1.
    ENDAT.
    VALUE1 = COLLECT-TOT + VALUE.
    AT end of MONAT.
      WRITE:85 VALUE1.
    ENDAT.
endloop.
CLEAR: COLLECT, SUMA, VALUE, VALUE1.
TOP-OF-PAGE.
WRITE:/06 'Doc No',
         22 'Post Date',
         39 'Amount',
         54 'Text'.
Moderator message : See the Sticky threads (related for performance tuning) in this forum. Thread locked.
Edited by: Vinod Kumar on Oct 13, 2011 11:12 AM

Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus

Is there a way to improve the performance of a report group?

Hi gurus,
Is there a way to improve the performance of a report group?
Points will be given later....
Thanks!

Hi there,
Thank you for your response. I thought there's no answer for this issue and planning to change it to ALV.
I looked at the codes and debugged it. After the select statement from ZZUWT table (customized), there's a loop that takes much time (10-12mins) for 1000 records. and several nested perform routines. It's a standard program so I'm hesitant to edit it.
I'll be checking on the primary keys. If it's ok, may I ask for your assistance in this part? Though I'm not that familiar and haven't tried creating a report painter before.
Thanks anyway...:D

HT201335 Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

HT5429 Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

HT4236 on syncing photos to my iphone from my mac (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version o

on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?

Thanks for your reply
I solved my problem,
Definitely a bug in syncing through itunes.
- Connect Iphone with MacBook Pro through USB
- Go to iphone on itunes, photos, deselect photo synchronization.
- Sync (all pics will be removed from iphone)
- Close itunes, iphoto, disconnect iphone
- Select in finder: (home)-pictures-iphoto library.
- Sec click on iphoto library and choose "show package contents"
- Delete iPod Photo Cache
- Close finder
- Empty trash
- Reconnect iphone
- Allow photo synchronization again and everything works smooth.
After this, changes made in iphoto are instantaneously reflected in iphone photos.
Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
Hope this improves. Still have to try cloud though.
Thanks
RC

Is there any way of improving compatibility between ipad 4 and windows xp p

is there any way of improving compatibility beween ipad and windows xp

Hi Smokey0422,
Although iTunes works with Windows XP, iCloud is not supported - so that does limit the functionality somewhat.
See the resources for your iPad at the following site:
http://www.apple.com/support/ipad/
See the setup instructions below:
http://www.apple.com/icloud/setup/pc.html
Cheers,
Judy

I am staying long term at a hotel. Is there a way I can boost the wifi signal?

I am staying long term at a hotel. Is there a way I can boost the wifi signal?

I think you may have better luck working with the hotel management and have them contact their wireless service provider to see if they can improve the signal in your room.
The only other option might be an external Wi-Fi antenna for your iPad ... but I'm not aware of anyone providing these at this point in time. Sorry!

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

Is there a way to automatically insert the filename in the footer of a spreadsheet using iWork's numbers 3.2?

Is there a way to automatically insert the filename of a spreadsheet into the footer when using iworks numbers 3.2? iworks 09 had this feature and I can't find this feature in the new version of numbers.

Hi rhyolite,
In Numbers 3.x, The Print View and Layout View have gone (for now at least). Page Headers and Footers can only be reached under Menu > File > Print... to open Print Preview. Hover the cursor to reveal the Page Header and Footer fields.
The only inserts that I can get to work in Print Preview are Page Number, Page Count and Date & Time. Filename is no longer in the Insert menu.
Regards,
Ian.

Is there a way to improve on the microphone sensitivity?

Similar Messages

Maybe you are looking for