Is there a way to stop colors flattening when encoding for the web and DVD

Hi. I am in post prod on my first feature film, which has some great horror dream sequences, lit red and green in the Mario Bava tradition. They really do look stunning in the original footage, with highly saturated crisp colors (We had a really great cinematographer) But when I try to create clips for the web, the colors flatten a lot. They look better on my i-phone than my Lcd computer monitor. doing DVD outputs also looses something, but less so. It depends on the playback equip. My plasma TV and upscaling dvd player make them look fairly good. The footage is progressive scan 25 frames per sec HD. (16:9 cropped to 2:35:1) Does anyone know the optimum settings for web encoding have just used 310x710 pixels using H264 compressor at 3000 kbts per sec

Hi
YEs you can read the ALE model data.
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
      IMPORTING
        own_logical_system             = sending_system
      EXCEPTIONS
        own_logical_system_not_defined = 01.
    SELECT   * FROM tbd05 INTO TABLE i_tbd05
    WHERE    sndsystem = sending_system
    AND      mestyp     = message_type.
Regards,
Vijay V

Similar Messages

Disappearing color profile when saved for the Web

Hello.
I have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.

Incredible how much gballard's site is famous! Lol. I use it for a while now and checked again right now with the three Web browsers and everything is all right.
As indicated in my first post, when saving for the Web I checked the “embed color profile” option. I already resized the file and converted it in sRGB first in Photoshop.
Yes it's pretty confusing to see some software not able to see the color profile when the file is saved with that option.
To illustrate, here are three screenshots from Windows' file browser => right-ckick on the file => properties => details:
Opening that “saved for the Web” file in PS, it's ok, the CP is recognized.
Opening it directly (from the file browser => “open with”) in Web browsers: ok in Firefox, Safari and Chrome (CP recognized in all).
Copying that file in my working site on localhost (no modification), integer it in Joomla's module gallery (which is CP aware) and then opening my site on localhost with Web browsers: ok in Firefox (because it considers a non-tagged file by default as beeing sRGB), NOT OK in Safari neither in Chrome.
Now, if I do the same with the “Save as” version of the file with embedded sRGB CP:
PS: ok
Opened directly in Web browsers: ok in the three cases
Opened in Web browsers through my Joomla site on localhost: OK IN ALL THREE BROWSERS
Good point gator_soup: I'll post a bug report. I'm new here on the forum and thought Adobe's staff would post here.

Is there a way to select all emails at once on the iPad and then delete them at one time?

Is there a way to select all emails at once on the iPad and then delete them at one time?

Tap on the edit button at the top right of the email list. This will let you select the emails to delete, once all are selected, tap on the bottom right button that says delete to delete them all at once.

Color shift when going to the web?

I spent 2 hours yesterday trying to get a graphic I had done in illustrator to export for use on the web. No matter what I did, the color always shifted - it looked like a gamma or lightening thing. The thing is, I'm not a noob to graphics or the web, I've been doing this professionally for over 10 years. But either CS3, or my recent move to the Mac, or something... has completely thrown a wrench in the works. The final response from Tech Support was that it was inevitable, and that was it. ?? What? That makes no sense.
Here's the lowdown: Illustrator document is set to RGB color space. I tried the standard color profile, and also tried setting it to unmanaged. I then tried both export and 'save for web'. I always get this shift. Everything is lighter. soo.. I then tried taking it over to Photoshop and saving from there. Strangely, it looked right in Photoshop, and then still wouldn't export without lightening everything.
Ultimately, nothing worked. What am I missing?

Here are a couple of good links about sRGB and color spaces in general.
http://www.color.org/sRGB.xalter
http://www.drycreekphoto.com/Learn/color_spaces.htm
The first one gets pretty technical after a few paragraphs; don't worry about the more technical aspects, just read the first part.
To make a long story short, the reason we create in or convert to sRGB before posting to the Web is that it has become a standard reference space for work that is intended to be displayed on monitors. No individual monitor behaves exactly as sRGB describes, but historically it was developed to be a good average color space that most monitors can achieve, or come close to.
When you go to choose a hex color for a web page, if you watch what you are doing, you will notice that the same color has a different hex code for every different color space you might try out. For instance, I have a client that uses PMS 109C in their logo and all their packaging. The only way I can select a hex color for that PMS color in a reproducible manner is to choose that color in a defined working space.
For the Web, we have all already agreed that working space should be sRGB. If I chose that color in my monitor's display space used as a working space, it would be different on every different machine I have available to me. I work on 4 different monitors, so I personally could potentially choose four different translations of that color. Which would be correct? None of them, because each monitor is different, each has a different profile, and so each would give me a different translation of the same color. So I need to make that translation while working in a standard working space. I can either select my color directly in sRGB, or I can select it in Adobe RGB (or another standardized working space that actually contains that color), and convert the entire file to sRGB before publishing to the web. Either approach works.
Since sRGB has the 2.2 gamma, you want to set your display to 2.2 so you won't see a lightening of the image when you view it without a profile.
why strip the profile? As far as I am concerned, you often do not have to, but under some circumstances will want to.
For photographs, illustrations, and paintings I leave the profile on jpegs, because color managed browsers will display them more accurately with the profile embedded. This is particularly true of Safari, for reasons I have already stated.
For graphics that need to match hex colors, I leave the profile off, because safari does not color manage hex colors. so Safari will set-up a mismatch between tagged jpegs and hex colors. If you need to match a graphic to hex colors on the page, it's better to leave the profile off.
If you are working on a page or a site with very large numbers of images, you may want to leave the profile off to save on disk space and download time as well. For me that is usually not a big consideration... but for some sites it may be.

I accidentally hit "download all" in itunes on my iphone 5. Is there a way to stop this without going thru each song individually and pausing it?

I am new to the iphone, just got my 1st one today!
I was just going to let the songs download, but shortly into it I got a message saying I had used 50% of data plan for MONTH, so I panicked and was just pausing each song as it started downloading. There's several hundered songs. Then I got a message saying I had used 75% data! I turned on my airplane mode to stop everything. Is there an easy way to stop the songs from ALL downloading without going thru each one individually? I'm not very tech saavy, so please be nice and use small words... Thanks.

Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices.

Is there a way to stop an ipad from trying to copy pictures and text?

I have a lot of scrolling text boxes in my project, and I want certain symbols to play when a particular text box or image is touched, but the ipad will offer you the option to cut, paste, copy etc...when one holds their finger on the text for more than a second (very annoying). Is there a line of text I can put in to disable these options for all text and objects, but will still allow individual actions to be written for certain text boxes and objects?
My test page can be viewed here, and one should be able to viewed/download the edge files from this page (sorry they're not zipped).
Any help is much appreciated,
Thanks

If the previous owner is alive, no.
If the previous owner is dead, take the device, its original purchase receipt, and that person's death certificate to a physical Apple Store.
(120652)

IS THERE A WAY TO DELETE A PURCHASE FROM IBOOKS FROM THE LIBRARY AND ICLOUD, OR AT LEAST A WAY TO HIDE WHAT YOU'VE PURCHASED IN THIS NEW APP?

Dear Apple, my name is Jack, and I recently upgraded my computer to the new OSX 10.9, which included among many other apps the iBooks one, in this new iBooks app for Mac I accidentally downloaded by mistake a sort of obscene japanese comic book, since the moment that this happened I've been trying to remove this content from my iBooks library, which is being impossible due to the fact that even if a successfully delete the book with the backspace key it still appears but with an iCloud symbol, and if I go to my iCloud settings theres no options to stop iBooks form sharing this on iCloud for there is no "iBooks" option on iCloud settings, I even followed a Tutorial on the apple web page about hiding your purchases that explains how to, but in this new version of iTunes there is no such option as "connect" under the Store menu of iTunes, or even if I make my way to my iTunes purchases this new iBook purchases does not appear. I just want to be able to open my new iBooks app without having to see this obscene japanese comic book all over the app. My request is for you people to add an option to completely remove books from the library and from iCloud, please, so far these new OSX was amazing and this is the very first time I have something to complain about.

Well as a matter of fact, I already found the solution. The option is a little bit hidden, and this will remove your purchases completely from the library and iCloud. What you have to do is this: 1.- Open iBooks app, and the first thing you will get it's your library, then at the top left corner of the window click on iBooks Store. Once iBooks store is open you will have four options at the top: "Featured", "Top Charts", "Categories" and "Top Authors", you have to click on "Featured" or "Categories" it's the same but you have to be on any of those two.
2.- Once you are in "Featured" or "Categories" at the right side of the window there's going to be your email address that you use as your apple id, and in "Categories" you will see at the right side the topic "All Categories" and bellow that you will see your email address again. Doesn't matter if you are on categories or featured the option bellow your apple id is going to be QUICK LINKS, and bellow that there's gonna be four options: Account. Purchased, Redeem and Support. Click on Purchased.
3.-Once you clicked on purchased and the Purchased window is open you will see in the middle of the window two options : "All" and "Not in my Library", click on "All", then you will have all your purchases, there you will only have to put the cursor on the book you want to completely delete, but without clicking on it, just putting the cursor in the book and a black cross will appear at the top left corner of the book, click on the cross, if it ask you are sure you want to hide or delete the content just click the affirmative option.
4.- In the top left corner click library again, once in your library you have to find the options that are at the very top of your screen, the ones that are in the same bar as your computer name, date and time, volume and in the case of macbooks the wifi signal and the battery. Those options are: iBooks, File, Edit, View, Go, Store, Window and Help. Click on "View" , when you get all the options of "View" you'll have to find the one that says "Show Purchases in iCloud" and most likely would have a check mark, if it does not have a check mark close it and skip to step 5, if it does have a check mark just click on this option so the check mark disappears.
5.- Last step. Now you just have to close the app, completely, so go to your dock and give a secondary click on iBooks app and on the secondary click options click Quit. Just open iBooks again and there will be there no more.
Hope this is of some help to any of you, and sorry if this was tricky or if I'm not very good at explaining. I figured this by myself so if any of you does not get this explanation just send me an email, I'll be happy to help you with it.
<Email Edited By Host>

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

I deleted contents from pages school report by accident. is there any way to get it back. I reopened the file and it is blank, I deleted the contents from a school report by accident. is there any way to get it back. I reopened the file and it is blank

I opened a file to print and by accident highlighted and deleted the content. Then in a panic I closed the file and now when I open it is blank. Is there any way to get it back. I have looked and can not see anyway. I dont have anything in my backup?

I'm not sure about older versions, but in Pages 3.x (OS X 10.9.x) select File > Revert To > Browse All Versions. Hopefully there will be an earlier version that you can "revert to".

HT4480 I put my itunes dollars into itunes and am trying to use it to buy lion on my PC and I cant get it to work. I guess I did it wrong, is there a way to get this money to use for the lion app?

Hi, I put my itunes dollars into itunes thinking I could use it to buy the Lion App and when I went to down load it asked for the money then. Is there a way to take the money from my itunes account?

Hi..
"put my itunes dollars" ... did you redeem an iTunes gift card? I see you used the link about redeming a code.
Three ways to purchase Lion
One if from redeeming an iTunes gift card. Two, setting up a credit or debit card account with iTunes associated with your Apple ID, or purchase the thumb drive > OS X Lion USB Thumb Drive - Apple Store (U.S.)
If you redeemed an iTunes gift card, make sure there is enough funds available. You need to take into account when you purchase apps including Lion, there may be applicable taxes or fees added the original purchase price.
Info regarding taxes and fees: iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS

Is there any way to configure storage queue message encoding for Web Job's QueueTrigger?

We have a web job that listens to Azure storage queue via QueueTrigger. The queue messages are not encoded when they are added to the queue:
CloudStorageAccount account = CloudStorageAccount.Parse("...");
CloudQueueClient client = account.CreateCloudQueueClient();
CloudQueue queue = client.GetQueueReference("test1");
queue.EncodeMessage = false;
queue.AddMessage(new CloudQueueMessage("hello world"));
And in the web job, we use the below method to listen to the queue.
public static Task ProcessQueueMessageAsync([QueueTrigger("test1")]string message)
And the web job crashes when it gets a message, with the below output. Unfortunately we cannot control the encode setting of the coming messages. So, our question is, is there any way to configure queue message encoding for Web Job's QueueTrigger?
Thank you for any help and/or suggestion.
Found the following functions:
WebJobTest1.Functions.ProcessQueueMessageAsync
Job host started
Unhandled Exception: System.FormatException: Invalid length for a Base-64 char array or string.
at System.Convert.FromBase64_Decode(Char* startInputPtr, Int32 inputLength, Byte* startDestPtr, Int32 destLength)
at System.Convert.FromBase64CharPtr(Char* inputPtr, Int32 inputLength)
at System.Convert.FromBase64String(String s)
at Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Storage.Queue.StorageQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Queues.StorageQueueMessageExtensions.TryGetAsString(IStorageQueueMessage message)
at Microsoft.Azure.WebJobs.Host.Queues.QueueCausalityManager.GetOwner(IStorageQueueMessage msg)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueTriggerExecutor.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueListener.<ProcessMessageAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at Microsoft.Azure.WebJobs.Host.Timers.BackgroundExceptionDispatcher.<>c__DisplayClass1.<Throw>b__0()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Press any key to continue . . .

Hi,
Thanks for posting here.
I am not too sure if the storage queue messages can be encoded before the webjob listens to it.
I am currently researching to gather more information with regards to your request.
I shall revert back to you with an update at the earliest.
Sincerely appreciate your patience.
Regards,
Shirisha Paderu

Encoding for the web/workflow. It works, better way?

I really need some help from the pros. And believe me, I appreciate all your help. Please bear with me as I summarize my workflow. I produce a very popular football highlite show for the local cable operation. ( 19 years now). It airs from a a DVD ( ouch ). But, I have recently taken it to the web using iWeb and it actually works fairly well. Here is my workflow, please see if you see any flaws or if there is a better way. My timeline is XDCAM HD. ( renders are ProRes) I export out a ref movie for each quarter of the game. Each export seems to take longer than I would think since it is only a reference file. Then, I use the iPhone preset in QuickTime Pro to shrink it down. (480 x 270 ) Finally, I export again as a hinted movie so I can stream it. (It would be great if I could increase the dimensions a bit as well), Any flaws or suggestions? You can view the program at northcoastgameoftheweek.com Thanks in advance for any input.
Best, Tom

I imagine your encode time is the killer plus the export. I can't help you with the export part but the encode time I might be able to.
We've started using the Elgato turbo.264 HD usb-encoder and have been fairly happy with it. The colors get a little washed out and there are some artifacts (more than I'd like) but the time savings is immense. You can also use it from within Compressor.

Is there any way to stop Illustrator from adding "copy" to the name of duplicate layers?

In the layers panel, when I duplicate a layer (or layers) illustrator appends the name of the duplicate with copy, copy 2, copy 3 etc.). Can this behaviour be turned off so that the duplicate layer name is identical to the original?

I doubt it. While Illustrator will allow you to manually assign the same name to multiple layers, I don't believe there is a switch to make it happen by default. Auto-naming of anything is always going to be "protective."

Is there any way to find a lost itouch without having the serial and it not having wifi for the icloud?

If you could please help, i would be much obliged. i really cannot live without my itouch. thanks.

The serial number will do nothing to help you find it.
If you failed to set up find my ipod, then there is no way to track it.

My friend wants to put music on their iPhone 5C but they do not have a laptop with iTunes that hasn't been associated with another iPhone/iPod. Is there any way they can skip linking their phone to the iTunes and JUST get the music?

The iPhone has not been associated with any iTunes as I was a little scard to connect it to mine as I do not want all my friend's apps on my phone. Also, we use different apple IDs so would we be able to have two apple IDs associated with one computer?
SO CONFUSED.
Please help!

Your friend can get a new Apple Id for themselves, and create a different account on one of the laptops. Then put all their music in a separate iTunes library, and sync the phone to that particular library.
This will keep there music separate from your library and their brother's library.
Just make another User on your computer for your friend to store their music in.

Is there a way to stop colors flattening when encoding for the web and DVD

Similar Messages

Maybe you are looking for