Is there any code hinting or debugging feature in Edge Animate?

I notice that edge animate javascript and jquery syntax is somewhat atypical, and at times proprietary. Unlike in Flash and action script, I am unable to get any help from within the program when a block of code fails to execute. I don't know if the problem is with the syntax on one of many lines of code, or that I merely forgot a semicolon.
I would think that help with coding with the application would be an integral part of the application since user interactivity is so common on many website and that interactivity requires, at times, some sophisticated scripts.
Any help would be appreciated.
Thanks

What about Edge Animate -specific syntax (e.g "Sym.$("something")" vs "this.".) That syntax is not standard js or jquery. Correct? I was hoping that Adobe provided coding help within the program.
It doesn't seem that this program gets frequent improvements. I've had the program installed on my computer for just shy of three months and there's been no updates whatsoever. To me scripting is an important component of any animation program that is used on the web, where interactivity is key.
Thank you for your help.
Chick

Similar Messages

  • Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.

    Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.

    Hi ThaPlaya,
    I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
    I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
    For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
    Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
    If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
    Sorry to infiltrate your post...
    Dawn/Flower1964

  • Just switched from safari on my imac. when using search menu safari gave me the option to "find on this page," which was an incredible help while doing research. Is there any way to have this feature using firefox?

    Just switched from safari on my imac. When using search menu in safari I had the option to "find on this page," which was an incredible help while doing research and looking for specific phrases/words. Is there any way to have this feature using firefox?

    I think Safari has the same keyboard shortcut as Firefox "command+F" on a Mac or "Ctrl+F" on Windows.
    Look in the lower left corner for the Find. There are more likely to be differences in Find Next and Find Previous in the keyboard shortcuts, but continuing at the Find bar at the bottom doesn't matter what browser you use. There is an "X" there to dismiss the Find bar. In Windows the "Esc" key will dismiss the bar if you are within the find text entry area.
    Keyboard shortcuts:
    * [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts?s=keyboard&r=0&as=s Keyboard shortcuts | How to | Firefox Help], from Mozilla very limited number of shortcuts but will show correctly for your system
    * [http://dmcritchie.mvps.org/firefox/keyboard.htm Firefox and other Browser Keyboard Shortcuts (Comparison Table)], more comprehensive but is oriented to Windows users with some guidelines for Mac and Linux users.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?

    How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?

    I think I worked out a solution given my equipment.  I was looking around on other forums and I found the following post concerning the ability for iPhone 4S to be on 3G and wifi simultaneously.
    "I know this thread is old and op may have discovered the answer already. However, I am posting this just in case someone else might be looking for a solution.
    The solution does not require any additional software nor require a jailbreak.
    All you need to accomplish this is already built into every iPhone and iPad with 3G.
    Connect to your wifi and write down the IP address your router assigned you. Then, select static tab instead of DHCP and fill in the IP address your DHCP server assigned to your iPad. Next, fill in the subnet mask but leave the rest of the fields empty.
    You now have access to your wifi as well as 3G.
    I ran into this issue when I wanted to use live traffic using 3G for my iPad's GPS and still connect to my GoFlex Satellite using wifi. It works extremely well."
    AFter configuring my phone to the router, as mentioned above, I connected my Apple TV to the same router.  Using the mirroring option I was able to airplay Netflix, You Tube and Flixster flawlessly from my phone to the big screen.  Direct TV and HBO GO did not work however. 
    I Then tried to access items directly from Apple TV thinking that it could use the data from my phone.  I was wrong.  So all in all I'm able to stream about half of my movie entertainment applications given my situation.  I'm pleased.

  • Is there any code example for "Web Survey"?

    Hi buddies,
    In the standard SRM Web Survey scenario, the experts submit questionnaire online. But our custmer want it offline.
    So we use offline Adobe Forms, the problem is after we get the data by uploading the offline PDF, how we put the data into the standard Web Survey. Is there any function moudle , BAPI, class for this purpose?  Is there any code example?
    Thanks!
    Hao

    I have tried to write some report using pch logical database and successed.
    在报表自身中，从 GET OBJEC 点，作为规定，数据库驱动程序将文件 PLOG 中的选定的选择恢复为规定的并检查权限。
    指令 TABLES 中结构声明是前提。若除了结构 OBJEC，还定义结构 GDSTR，则将结构评估的参数添加到标准选择屏幕。这可以通过评估路径进行结构评估。
    REPORT  ZPHC_TEST.
    TABLES : objec.
    infotypes: 1000.
    INITIALIZATION.
    START-OF-SELECTION.
    get objec.
    WRITE : p1000-objid.
    end-of-SELECTION.

  • Code Hinting and coloring Feature not working

    In most of the related pages the code hinting feature is working great but in this asp page it give a warning saying : there is a syntax error on line xxxx. Code hinting may not work until you fix this error.
    the code is as follows
    <%
         sub jsWindowOnLoad()
    %>
         <script type="text/javascript">
         function init1()
             <% '''''this place error
                   if cp_name="Event" then
           %>    
              dp_start_date  = new Epoch('epoch_popup','popup',document.getElementById('Start_dt'));
              dp_end_date  = new Epoch('epoch_popup','popup',document.getElementById('End_dt'));
              <%        .         %>
           </script>
    <%
         end sub
    %>
    the  ' <% ' marked with a comment is the place where the prompt appears.....
    It is stored as .asp file
    this file is is used as an include file in many other files....and apparently wherever this file appears in the include section the code hinting for that .asp file goes haywire. also all the asp and javascript code appears in the same color throughout the asp file.
    due to the non working of code hinting and coloring my speed of development and error debugging is greatly reduced .... kindly suggest what can be done
    just to clarify.....There is no problem in execution....everything works absolutely fine (even in the above code...) only no code hinting and color !!!

    An example zip containing a simple project would be very helpful. Can you provide one or maybe a link to one?
    My first guess would be that you're missing the Flex project nature on your project. You can add it by right clicking on your project and select Add/Change Project Type > Add Flex Project Type...
    From there, you'll have to fix your project properties Flex Build Path > "Main source folder" to point to parent/flex-project or wherever the root of your flex source files are.
    Thanks,
    Jason San Jose
    Quality Engineer, Flash Builder

  • Is there any code example for LDB PCH

    I always write report using logical database 'PNP' and 'PNPCE',  which make it very easy to have code for HR master data.
    The 'PCH' is for OM data, is there any method, like using "PNP", can make program for OM easier?
    Many thx, if any help.

    I have tried to write some report using pch logical database and successed.
    在报表自身中，从 GET OBJEC 点，作为规定，数据库驱动程序将文件 PLOG 中的选定的选择恢复为规定的并检查权限。
    指令 TABLES 中结构声明是前提。若除了结构 OBJEC，还定义结构 GDSTR，则将结构评估的参数添加到标准选择屏幕。这可以通过评估路径进行结构评估。
    REPORT  ZPHC_TEST.
    TABLES : objec.
    infotypes: 1000.
    INITIALIZATION.
    START-OF-SELECTION.
    get objec.
    WRITE : p1000-objid.
    end-of-SELECTION.

  • How to increare roll area size programmatically? Is there any code?

    Hello everyone:
              I am running a program that goes to dump with an error "roll area size too small" in ECC6.0. The same program works fine in 4.6C. We worked with BASIS to set roll area related paramteres, logged OSS notes and set parameters as SAP suggested but nothing worked! Is there any function module or any code that I could use to free the roll area size in the program? Rewards assured.
    Thanks.
    Mithun

    Thanks everyone for the feedback. I did work with SAP and had BASIS set the parameters as per the suggestions by SAP and after going back and forth they said it might be a program issue. This is the Z program and this is the code where it goes to DUMP with the error "Roll area too small".
    ================================================
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            authority              = space
            immediately            = space
            new_list_id            = c_x
            no_dialog              = c_x
           user                   = sy-uname
          IMPORTING
            out_parameters         = params
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF sy-subrc NE 0.
          CLEAR : params.
        ENDIF.
    The printer destination has to be set up
        params-pdest = v_dest.
        params-prtxt = v_spool_text.
        params-paart = c_paart.
        params-prtxt = v_spool_text.
        params-primm = 'X'.
        params-prrel = space.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        NEW-PAGE PRINT OFF.
    ===========================================
    I used FREE statements in the program to free internal tables and if I remove the code above the program runs successfully! This works fine in 4.6C! All the paramters like roll area and stuff is more in ECC6.0 compared to 4.6C but the program still abends!! Please let me know if there is any resolution!!
    *I am rewarding all the answers*
    Thanks.
    Mithun

  • 5 New Features that Edge Animate should support

    I have 5 requests for a future release of Edge Animate:
    01. Allow us to import entire Photoshop files with the individual layers intact and "stacked" correctly in Edge to speed up production
    02. Support Z depth layer transform for 3D projection and 2.5D animation purposes
    03. Include dynamic filters such as lens blur, glow, and other After Effects type filters that the user can apply to any given layer in Edge...also make the filter properties animatable
    04. Be able to directly import .MOV, H.264, .FLV, and .WMV video files instead of writing code that references a video from a different location
    05. Support dynamic masking in Edge for any given layer and make the masking properties animatable
    Thanks!
    -Russ

    For 3 and 5 the limitation isn't really the cpu. The limitation is the spec. Edge Animate is attempting to work within the HTML5, CSS3 and javascript specifications. That way when you create an edge animation it should play nicely across all modern browsers. One of the great things about using a plug-in like Flash is that any of that missing code sould be provided by the plug-in and we weren't limited by waiting for the browser to support it.
    That said, I keep seeing more and more amaziing things done with javascipt. And there is already some limited filter support svg images (on some browsers) So maybe soft, feathered masks, blurs,  glows, and ink effects (add, lighten, multiply) will arrive sooner rather than later.

  • Is there a way to use angular.js in edge animate

    I am trying to add angular.js to my edge animate composition to use for a game. I want to use ng-model in input fields to store player information. I can't seem to get this to work by using. I have added the angularjs script using the add script feature and yepnope way. and this is what i have for my input field and label I want it to be binded to.
    var namelabel0 = sym.$("nameInput0");
    namelabel0.html('<form name="myForm" ng-app="" ng-controller="Ctrl"><input type="text" name="input" ng-model="user1"></form>');
    var namelabel1text = sym.$("Text");
    namelabel1text.html('{{user1}}');

    I haven't tried this but I'd presume you would have to treat the angular js code the same way you'd treat custom external js scripts: that is use the AdobeEdge object. See my reply to this question:
    Access the embedded Edge animation through Javascript
    Peter Small

  • Edge Commons Spotlight not working any more on the new version of Edge Animate CC 2014.1

    Hi, i am trying to use the Edge Commons Spotlight but with the new version of Edge Animate cc 2014.1 is not working right. The result is a black transparent background with a little white spot on the center. Please help!!!
    CompositionReady:
    yepnope({
        load: [
                 "js/style.css"
    Click:
    var config = {
        width: 800,
        height: 508,
        type: "image",
        source: "spot/_01.png"
    EC.Spotlight.open( config );
    I also add js/EdgeCommons.js
    and js/jquery-2.1.1.min.js from the disk.
    This is the link to the proyect:
    https://www.dropbox.com/sh/5w1qspe4vfw0wza/AACEk6ieJiaGGMe_IFpWlssba?dl=0
    Thanks a lot!!
    more

    We will update you on the fix. Right now, if you add jquery ui as a dependency after jQuery, that will solve your problem. I am sharing a sample here - Dropbox - EC.zip. I am loading jQuery UI from the CDN, you can copy is locally also and load it from there.
    -Dharmendra

  • Are there any Radio and MSN Messenger features in my 8520?

    Hi everyone,
    I can't find radio feature in my BB Curve 8520.  Do I need to download something or is it not possible at all?
    Also I would like to use MSN Messenger on the go. Any chance to download it? Do I need to go to MSN page and look for suitable version. I am quite new.
    It would be great to have some help.
    Thanks,

    1. There are numerous live streaming music applications, a few of which will play radio stations which stream to the internet.
    Try moodio.fm, for one.
    2. MSN Messenger = Live Messenger
    http://na.blackberry.com/eng/devices/features/im/wlm.jsp
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is there any in build access security feature in apple tv? I am using this device as a service for my client and am afraid third party would cut in and display other contents.

    I am planning to ofgfer the apple TV services for my client in a number of room. I know that apple TV could be set with different ID/label to differentiate them if I am, installing multiple device within the same wireless coverage SSID. However, how do I prevent intruders cutiing in with some other contents while my client is doing the presentation? For example in Room A, client A is doing the video opresentation vioa his Mac book Pro. there is always a possibility that some people with OS X Mountain Lion detect the device and decide to play a prank and start to push other contents to the Apple TV device in Room A. If the device could provide an authentication feature, there will actually resolve my concern. Appreciate any feedback. Thanks Richard

    Hi soo.richard,
    You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
    Airplay itself can be password protected through the airplay settings.
    I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
    Hope this helps.

  • Is there any IDE for compiling/debugging FlasCC apps?

    I want to use FlasCC for a large project, but I have no experience with GDB. Is there an IDE for FlasCC out there so I can do the compiling/debugging things (mostly debugging)? Or could anyone tell me how to configure one (like eclipse)?

    Since all iTunes content, with the exception of purchased ringtones, can be re-downloaded for free, your apps are already available from the "cloud" so to speak.

  • Is there any mac/iOS app or feature I can use to alert me every five minutes?

    I need an app or a feature on Mac, iPhone, or iPad that will send me a push notification or some kind of alert every five minutes.
    I would rather not set up a million calendar alerts or alarms, as I will have to be using this a lot.
    It will need to run in the background, especially if it's an ios app.
    I would rather not use an iOS app that makes noise but doesn't send a push notification.
    An iOS app is preferred, but anything works.
    System alternatives will be accepted as well.
    And no, I cannot simply ask Siri to do it, as I have tried in the past, and she says she can't do alerts that frequent.
    Thank you for the help!

    You could do this using AppleScript on your Mac.
    See: http://stackoverflow.com/questions/3718520/how-do-i-write-applescript-that-will- give-me-an-hourly-popup-alert for the basic code to do the repeating alert.
    Combine it with this for a Notification: http://macosxautomation.com/mavericks/notifications/01.html
    Quite simple really...

Maybe you are looking for