Is there any way to get data from my drown i phone?

MY frind iphone dip in water, she try to fix it or at least get the data from it( photo , aplications, contacts,...atc) but no body can do it ?
I am shore that thaier is some way to get back the data , but i dont now how .

Because an iPhone's hard drive is nonremovable, you need to be able to turn on the iPhone in order to access its data. However, iCloud automatically backs up your iPhone's photos, applications, contacts, etc..., so after you get a new iPhone, the first time setup menu will give you the option to restore it from your friend's old iPhone's backup.

Similar Messages

Is there any way to recover data from a cleared soft partition?

Is there any way to recover data from a cleared soft partition? <eom>

You could try using 'metarecover'. I don't know if that works after a metaclear, but it's the only think that I could think to try.
I think you could brute-force search for UFS filesystems within the underlying storage, but that's pretty tedious.
Darren

Is there any way of getting back from a wrong clicked free trial to add my serial number correctly?

Hi
On purchasing a new imac I copied the apps across & on opening CS6 was requested to load serial numbers, through tiredness I added the seria; number from CS5.5 and therefore not recognised for the CS6, then when about to enter again through tiredness I must have clicked free trial and now have the CS6 in that format.
Is there any way of getting back to that initial box to load the correct numbers & get out of trial as although it works I need it set up correctly?
Any help appreciated

Sorry, cant see this visible on menu or drop downs, did run through all menus before posting, could just be tired from 3 weeks straight.
If this is not an option does that mean I am set up ?

Is there any way to export data from a calendar 5 instance to 6.3?

I've run into yet another issue with my migration from calendar 5 to 6.3.
It turns out that one of our satellite clinics has a very large amount of data stored on our older server. Right now we're having to put the migration on hold because there are several hundred events on the old server that are repeat events and/or events scheduled relatively far in the future. This issue, along with the possibility of double booking events/appointments while both servers are active, is a serious risk that could have detrimental effects on this site.
There are a few issues that I'm not certain how to handle in this case. First of all, the old server's database is stored in schema 1, and changes in the LDAP directory structure from cal 5 vs. 6.3 made it impossible to migrate the old database and accounts. The new server is schema 2. So migrating the whole directory, especially at this point, seems rather unlikely.
Is there any way that I can export data for specific accounts and calendars for the people at this site in a version-independent format and import it to the new server? If nothing else we can schedule somebody to come in on one of the weekends and manually copy the data, but if possible I'd like to avoid devoting somebody to that for the several hours that it would take to copy that by hand. Also, this would not be the preferred method due to the fact that human error could result in our clients being misscheduled, which would obviously be bad for business.
I'd appreciate any ideas anybody may have on this matter.
Thanks in advance.
-Damon

damo.gets wrote:
Actually I guess I was missing the obvious method of simply exporting to xml and importing on the new calendar. For some reason I thought that the exports were incompatible between versions as well.Hmm... whilst this may have worked on the face-of-it I do wonder whether everything has indeed been moved across and more importantly translated into the correct form e.g. access controls, uids => uids@domain format.
Is there anybody that can answer definitively whether or not any data will be lost by this procedure?There are simply too many variables involved in your proposed migration to provide any kind of 100% iron-clad guarantees. I would suggest you perform a thorough test migration of the data and then compare the ics/xml export from the ics5/6 systems to see if any of the data has changed. Also test to see whether access controls are still working (can a user who could previously edit another persons calendar on ics5 now do so with ics6).
Things to look out for are that meeting attendee information is kept, any 'fancy' characters (i.e. 8-bit characters) and formatting information is kept, the number of tasks/meetings is consistent between the two versions and so forth.
Regards,
Shane.

My babysitter synced her iphone 4s on my computer and i didnt notice until i synced mine now all my contacts are deleted from my computer. is there any way to get my contacts back on my phone? like a way to restore from before she synced her phone?HELP!!

HELP!! my babysitter synced her iphone 4s with my computer and i didnt notice she deleted all my contacts when she did this. so when i synced mine it deleted all the contacts on my phone! is there any way to restore from before the sync? HELP!!!

if you see the option to restore in itunes, click it. Your phone will give you the option to restore as new, or restore from backup.
http://support.apple.com/kb/HT1414
The above article walks you through it, and has pictures. As for your contacts, if you had them saved to Outlook (windows contacts?) you can follow this other article for getting them back. I know it says ipod, but it will work the same.
http://support.apple.com/kb/HT3191

Is there any way to retrieve Data from permanently crashed Palm?

I have a treo 755p that seemed to die on me. I can't get it past the "Access" opening page when I power on. The phone gave me a message about memory shortfall after a phone call and that was it. My service provider -Telus- no longer handles Palm and so they quickly told me that it was toast... but I'm suspicious... They want to get me into a Blackberry.
I have discovered that everthing was backed up except for my Versamail and I had some important emails stored there. Is there some way that this information can be accessed in any way? Is there something I can try to do? The person at the store tried to reset the phone but that apparently did not work.
So... two parts to the the question: Can somebody tell me what steps I can do to save my Treo and if it is dead... is there any way to access the phone's hard drive?

Hello and thank you for using the Palm Help Forums!
I am sorry to hear about the problem you are having. Unfortunately, the device does need to be fully booted to access the memory and sync it. If it is not able to boot, there is no supported way of getting your data off of that unit. A hard reset may resolve the boot issue you are having but the data would be lost. However, you can try a hard reset and answer "No" to erasing your data to see if it will fully boot. I will epxlain this process in further detail.
To hard reset the device you will want to remove the battery. Before placing the battery back in the device, hold down the red (end call) button. While holding down that button reinsert the battery. Continue holding the red button until the loading bar at the bottom completes. You will then be prompted with a message "Erase All Data Yes or No." You will then press DOWN on the 5 way navigator to respond "No" to this prompt. If the device still gets stuck and will not boot then you must answer "Yes" to resolve the issue. NOTE: BY ANSWERING YES WILL ERASE ALL DATA CURRENTLY STORED ON THE DEVICE.
I hope this helps in resolving the issue you are having. Future advice: Hotsync your device to a computer regularly to keep a back up of your data just incase if these problems occur.

Is there any way to get songs from your iPod nano into your iTunes library?

My iTunes library has been totally cleared but my iPod nano is full. I'd really like the music back in my iTunes library, so is there a way to get the music from my iPod into iTunes?

http://discussions.apple.com/message.jspa?messageID=2943841#2943841

HT201371 i have iphone 4s with damage screen, where i can get it repaired, and i am living in Qatar. Is there any way to get repair from iphone

I have iphone 4s with damage screen, is there any possibility to get it repaired i am from Qatar. Here the main dealer of Apple is Iphone. and they are not accepting any Iphone device which purchased from outside vodafone. Please tell me the sulution.???

iPhone warranty is valid only in country of original purchase. You must
return the iPhone personally or via friend/relative to where it was sold
to have it evaluated.

Is there any way to save data from a broken Iphone that still turns on but computer wont recognise it?

My iphone 4 was thrown at the floor and smashed. It charges still, and switches between showing the apple logo on screen, to blank, and then sometimes to the initial start up screen where it asks me to connect it to itunes. When plugged into the computer however the computer doesn't show it in Devices, and it doesn't appear in Itunes. I am wondering if there are any options to try and get all my photos and contacts off it in particular. I am not sure if itunes backed up the data when i updated the phone previously... Thank you so much for any help, i appreciate it so much!

If a repairer was too look at it and they are not with Apple, you would void your warranty entirely.
To check previous backups, go into Edit>Preferences>Devices on Windows, and iTunes>Preferences>Devices for Mac, that will show a list of backups

Is there any way to get sound from rear speakers and subwoofer when listening to MP3s

I have Logitech 4. speakers connected to a SoundBlaster Li've 5. card. The front speakers work great, but even when I run tests, I get nothing from the other three. Any ideas?

I am having the exact same problem when running through my Sony digital reciever. I have checked the CMSS box and the spdif passthrough mode and still only getting stereo

Is there any way to migrate data from my Leopard 10.5.8 mac mini to my new Lion mini?

Just got the new Mac Mini that has Lion pre-installed. I want to migrate my data from my previous mac mini that has 10.5.8 installed. What's the trick to do it? Migration Assistant on my Lion mini is telling me to update the assistant on my old computer but it's already up to date!

That may work, if the file permissions will allow it. And it will work for "simple" applications, but not "complex" ones, that came with their own installers. See Transferring Applications. Complex apps must be transferred via Setup Assistant or Migration Assistant, or reinstalled from the original discs or downloads.

Is there any way to merge data from multiple user accounts on the same mac?

After a HD crash I reconstructed from Time Machine. Somehow I created multiple users and the data is different. I'd like to eliminate the user accounts and get to just a single user. Anything there?

Have a read here http://web.me.com/pondini/AppleTips/Transfer.html
Stefan

Is there any way to get videos from my Sony Handycam to my MacBook?

I just found out today about how the Handycam (which uses MiniDV) uses a firewire cable, while the MacBook doesn't have a firewire port. Obviously this is a problem. I am exceedingly new to Apple. I need a simple answer as to whether there is ANYTHING I can do, even if roundabout, to get the material I have on Mini-DV tapes onto the MacBook.
Also, if this is going to be a real problem, is there a different type of camcorder I should look at buying instead of my (practically brand new...) Handycam?
Thanks

Welcome to Apple Discussions!
If you need Firewire look at the new (early 2009) white Macbook it has Firewire. (and the new NVIDIA graphics.)
http://www.apple.com/macbook/white/
Thousands of computer peripherals use Firewire, with more coming out all the time.
Also, if this is going to be a real problem, is there a different type of camcorder I should look at buying
Maybe, A USB camcorder.
USB camcorders use formats that use high compression to store the video files thereby lowering quality. This may be good enough to give you "decent footage" if so, then you won't have a problem using a USB camcorder. However I have never been happy with the quality that a USB camcorder provides (they always look grainy to me).
A Firewire miniDV tape cam will give you lossless quality video and is best for any editing purposes (iMovie, Final Cut etc.). So without Firewire make sure you get a chance to try out any USB camcorder before you buy.

Is there any way to hide data from the BW developers in BW environment?

my company needs a special case where the BW developers need not see the HR data like income, age etc of the other employees but when a report is printed, the data should be displayed. Is there a possibilty like this?

Hi Nasa,
Please try the authorization object S_RS_ICUBE. One of the fields is "SubObject". One of the choices for this field is "Data".
Be sure that your developers do not have this field for the InfoCube/InfoArea in question.
That might work.
Another option (if you are on BI 7.0) is turn on authorization relevance for one of the InfoObjects in the Cube.
Then, be sure that the developers do not have an analysis authorization with this characteristic (or that they don't have 0BI_ALL). This is another layer, and might not stop access in all situations, for example transaction listcube.
Good Luck
Rob

Is there any way to recover data from bad ipod hard drive?

My 60GB iPod photo shows a sad iPod icon, will not connect to iTunes and will not charge. I have recently replaced the battery and it was working for a day, but now I keep getting the sad iPod icon. If I take the hard drive out and connect it with a USB2.0 mini enclosure to my computer, can I recover the data on it?

Depends... See Corrupt iPod classic.
tt2

Is there any way to get data from my drown i phone?

Similar Messages

Maybe you are looking for