Is there anyway to read the unscaled voltage from a scaled virtual channel?

I am using DAQmx to read voltage from a SCXI chassis. Programmically in Labview I created a task with virtual channels and custom scales. Later in the program, I wish to view the scaled volatge and the raw voltage at the same time. Is there a property node which will allow me to do so?

Hi Fergusonhd -- yes, there is a way to do this --> Look in DAQmx-> DAQmxAdvanced-> Scale -> Scale Property node.
Drop it in and wire in your scale.(I did it by creating a constant for active_scale) Select the various attributes depending on the type of scale you created and manipulate your signals based on that information - For ex. if you created a linear scale, you could get information about the slope and intercept from this property node -- that being said, you can use this information and do the reverse logic:
[if original was Y=aX+b]
X = (Y-b)/a
where b is the Y intercept and a is the slope
Hope this helps
VNIU

Similar Messages

  • Is there anyway to keep the Lightning charger from breaking?

    Is there anyway to keep the Lightning charger from breaking? I've gone through 8 of these in less than 5 months. When I take it apart it looks like where the wires are connected to the actual lightning plug it is a very flimsy soldering job. It looks like it was made by people who were told don't waste your time. We want them to buy lots.

    Haven't had any problems with my lightning charger nor do I know of anyone else who has.
    Are you pulling the connector out by the cord?

  • Is there anyway to export the iPod metadata from my iPhone 4? I don't need the music, I have that on an external hard drive, but my backup got wiped out and I need the metadata.

    Is there anyway to export the iPod metadata from my iPhone 4? I don't need the music, I have that on an external hard drive, but my backup got wiped out and I need the metadata.

    Okay, so I had to re-install iTunes. My iTunes library is currently empty. I can make a new back up and the location of the songs not having changed, these will be available in my library?

  • Is there anyway to uninstall the IOS 6 from my IPHONE?

    Is there anyway to uninstall the IOS 6 from my IPHONE?

    This is the ipod touch forum.
    There is no legit way at all to go back.

  • I deleted an e-mail from my iCloud account from my iPhone and cleared the trash. I accidentally deleted an e-mail from my college containing a string of 3 e-mails which are very important. Is there anyway to retrieve the e-mail from the Apple server?

    I deleted an e-mail from my iCloud account from my iPhone and cleared the trash. I accidentally deleted an e-mail from my college containing a string of 3 e-mails which are very important. Is there anyway to retrieve the e-mail from the Apple server?

    My question is similar:  I deleted email folders in my mail app on iPhone 4 and it deleted the folders on all my other devices--literally THOUSANDS of emails!  I went to iCloud to recover them and can't find them.  HELP PLEASE!

  • My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac?

    My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac? Or do I have to manually upload the CDs again?

    Hi,
    See if this doc helps https://discussions.apple.com/docs/DOC-3991
    Jim

  • My old computer crashed, i have a new computer, is there anyway to transfer the itunes library from my iphone to my new computer?

    Help! My old computer crashed, and I have a bunch of music that I don't have on cd any longer, is there anyway to move the library I have on my iPhone now to my new computer I just bought?

    Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
    You can only transfer Purchased music over to Itunes on your PC.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    As for you own music and contents, you may have to use a third party software to copy over. A good Free one is called Sharepod which you can download from Download.com here:
    http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

  • How do I read the excitation Voltage from an NI 9237

    Hello everyone,
    I am new to labview and have some previously set up code I am trying to work with in a research situation. We have a strain gauge connected to an NI 9237 module which in turn is connected to a cRIO-9022. 
    Our issue is that during our reading there is an constant upwards trend in the data that occurs over time. We want to check the excitation voltage the 9237 is sending to the strain gauge in software so that we can (hopefully) properly account for any drifting that is occuring in the excitation voltage. In the attached project I have all our code.   
    Again, any advice or guidance would be appreciated.  Right now the excitation voltage is set to 5V and we have a constant input of 5V in the VI but I would like to replace that with a reading of the excitation voltage.
    Thanks in advance, 
    Daniel
    Attachments:
    Axial_Force_Omega.vi ‏35 KB

    If you have a module with an Analog Input, I don't see why you couldn't wire the excitation up to an AI and log it that way.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • HT201269 if my iphone is crushed and will not read onto itunes/sync, is there anyway to access the data and back it up?

    if my iphone is crushed(droped and ran over...) and will not read onto itunes/sync, is there anyway to access the data and back it? i really dont want to lose the progress in the apps that i play often....

    i wasnt expecting to acompish it... just wondering if there was another method, and was trying to have a little hope but thank you

  • HT1329 if the music that is on the iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

    if the music that is on an iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

    See this support article:
    http://support.apple.com/kb/HT1848
    You can also download at least some of your content (audiobooks being a notable exception) again from the iTunes Store:
    http://support.apple.com/kb/ht2519
    For additional instructions, particularly for content not purchased from the iTunes Store, check out this user tip from TuringTest:
    https://discussions.apple.com/docs/DOC-3991
    and this page on "How-to Geek":
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • HT4914 I often record songs at a particular tempo, iTunes Match will then match it and send it back to me at the original tempo, is there anyway I can stop some songs from being matched. At the moment I have turned match off. But I would like to sync play

    I often record songs at a particular tempo, iTunes Match will then match it and send it back to me at the original tempo, is there anyway I can stop some songs from being matched. At the moment I have turned match off. But I would like to sync playlists.

    How old was this backup? It sounds like it was at least several weeks old.
    You can look directly in the TM backup for the music.
    1. Connect to the external HDD the backup is kept on.
    2. Open a Finder window and select the backup drive in the left hand panel. Double click into the folders until you see a list of folders with dates.
    These are the incremental backups. You can start at the top or the bottom of the list but I suggest you double Latest/<HDD Name>/Users/<Account Name>/Music/iTunes/iTunes Media/Music. From this location you can start looking for the "missing" music. When/if you find it you can simply drag-n-drop to ~/Music/iTunes/iTunes Media/Music on the internal HDD.
    If the music is actually not in the backups (for whatever reason) then you've got a problem.
    You can download the uploaded files from the cloud by deleting the affected tracks from the iTunes library (but not the cloud!), highlighting multiple tracks at once, right-clicking and choosing "download."

  • Is there anyway to take a downloaded app from one computer and put it on another without rebuying it. I have a macbook that I bought the new iMovie and iPhoto on, but I would rather it be on my iMac. So is there anyway I can change it?

    Is there anyway to take a downloaded app from one computer and put it on another without rebuying it. I have a macbook that I bought the new iMovie and iPhoto on, but I would rather it be on my iMac. So is there anyway I can change it? I thought that if I bought it the apps on my macbook, they would be avaliable on my imac like the mobile devices operate. The macbook has 10.6.8 cause its a older model and I think lion would slow it down. Any help??

    Just redownload it on the other computer by logging into the App Store with the same Apple ID you used to purchase it.

  • I had to buy a new computer and had to open a new ITunes account is there anyway of merging the 2 accounts?

    I recently had to buy a new computer and had to download ITunes again, it wouldnt let me open ity with my normal account so had to open a new one, because of this i cant back up my phone cause it doesnt says as the data is from another ITunes i will loose it all.  Is there anyway to merge the 2 accounts so i dont loose all my data when updating my phone?

    There was no reason to start a new account.
    You can certainly use your old account on any computer/device.
    You cannot merge accounts.

  • HT201269 I have years worth of music on my PC that is about to die.  If I get an iPad is there anyway to get the music from my PC onto the iPad? I have the iCloud but my understanding is only music actually purchased from iTunes lives int he cloud.

    I have years worth of music on my PC that is about to die.  If I get an iPad is there anyway to get the music from my PC onto the iPad? I have the iCloud but my understanding is only music actually purchased from iTunes lives int he cloud. I have music that was legally purchased and loaded to my iTunes account from cd's that I no longer own.  I need a new laptop and am deciding between the iPad and the Mac book.  I use the computer for music, photos, and web - nothing else and nothing fancy.  I don't know that there is a way to save my huge music library without saving it to an external hard drive and then loading it to a new one (does the iPad have a port to plug an external hard drive into?)

    First, you would need to make a backup of the entire iTunes folder on the PC. You could get music to the iPad if the PC was still functioning, or you would have to move the music to another computer. An iPad is not a laptop, and does not have a port to plug an external drive into. You can sync music to the iPad from the computer, but you are correct, unless you get iTunes Match, you would need a computer to copy the music to and then sync to an iPad.

  • My hard drive crashed and everything on my laptop was lost... is there anyway to transfer the music that I had put onto my phone into the itunes on my computer ?

    My hard drive crashed and everything on my laptop was lost... is there anyway to transfer the music that I had put onto my phone into the itunes on my computer ?

    I have a similar issue. My hard drive crashed, so I had a new one installed and I'm basically starting from scratch on my computer.  My iPhone has a lot of my stuff on it (photos and music in particular).  When I plugged into iTunes I did a "back up" of my phone to the computer....this transferred the photos in my camera roll, and music purchased through iTunes.
    So....I still have a ton of photos (saved in folders, not my camera roll), and music (older stuff not purchased through iTunes) that I want to get to my computer.  I am scared to "sync" my phone in iTunes for the first time.....if I do this, will it make my phone match my computer (effectively erasing the stuff on the phone?).  What I want is for my computer to match my phone (thus transferring the additional photos and music).  Is the third party software the only way??  Does it really work well/is it worth the money?  Thanks very much for the help.

Maybe you are looking for

  • Calendar events on iphone won't sync to ical on Mac since iphone 7.0.2 upgrade

    Help! Some events - but not every one -  entered into new Iphone SW 7.0.2 do not sync back to the Calendar (v 4.0.4 from ILife 2009).  I have tried rebooting my systems (computer and phone), as well as re-creating the problem by adding new test event

  • Connecting iPad to a projector

    Hi How can I connect my iPad to a VGA projector to play my presentation? Thank you

  • Set Start Position to Calculate Travel Time in Calendars

    Hi All, I am quite impressed with the new traveling time feature in Calendars, however I cannot seem to get the best out of it. Is there a way to reset the start position for the calculations, I am thinking about the following senario; Three appointm

  • Procedures

    Hi, All, Can a stored procedure be used as a function in a SQL? I knew procedure can return more than one values but function can only return one. I know how to use a function in a SQL, but don’t how to use a procedure in SQL (please give an example)

  • Export to query ready mode

    In version 11.1.2 when exporting a report to query ready mode from workspace we are getting an HRdialogue error message. However when I turn off the POV preview in user preferences it works. Anyone else experiencing this? Thanks, Jeff