Is Time Capsule necessary?

I recently joined the mac world and bought a macbook pro. Love it. I also bought a Time Capsule thinking it was the thing to do, specificaly for backup.
I haven't hooked it up since I just had my house rewired for ATT U Verse. Since then, I have very fast wireless internet though ATT. I only use the computer for pictures, music for my i touch and not much more at home. Since I haven't opened the box yet for time capsule, I think I will return it and save a couple hundred and just buy a back up drive. Don't need it for wireles. Any thoughts? P

Don't need it for wireles. Any thoughts?
Since you already have wireless, the requirement for having the Time Capsule, other than for backups, pretty much nulls out. If you only plan on backing up your MacBook Pro, you will definitely find doing backups to an external firewire/USB drive directly attached to your laptop a better deal performance-wise.

Similar Messages

Time Capsule vs. Other Mass Storage Device

I am a Mac newby seeking advice. I recently purchased the MBA below to replace my personal PC. My previous setup was a desktop with plenty of storage to handle my needs (including iTunes) and I backed up data directly to an external hard drive (I know pretty basic).
After purchasing the MBA, I realized I do not have enough internal hard drive space to store all of my music and my current external drive is too small for all the media and backup of the MBA. Also, the point of the MBA is to be mobile. Also, I would like my Sonos music system (with an application similar to iTunes) to be able to access the music library. Lastly, I have far to many songs purchase outside of iTunes to use iTunes Match. Therefore, I started seeking wireless alternatives to store my music and backup my MBA. Although an NAS would probably be ideal, I have found out through trial and error that the basic systems do not work with a MAC and the only ones with a prayer are the more expensive ones (i.e. Synology and QNAPS). Therefore, I have decided to pursue a more simplified approach.
My Internet and TV provider is CenturyLink. Their router is very basic with only 802.11g speed and without any USB ports. The following configuration has been suggested to my by some more experienced Apple users to provide wireless data access and backup.
Requesting CenturyLink provide me with a basic modem.
Purchasing an Airport Extreme (or similar wireless n router with a USB port).
Connecting the Airport Extreme (or other wireless router) to the basic modem.
Purchasing a Time Capsule (or other mass storage device).
Partitioning it using either the specific one for the Time Capsule (or Disk Utility for other mass storage devices) to provide one volume for my media and one for backup using Time Machine.
Moving the media from my old external drive (which is catalogued with folders for each artist, subfolders for each album and the songs in the subfolders) by connecting the old mass storage device and Time Machine to my MBA and using Finder to do this (see the questions below regarding this).
Moving/cataloging the media from the Time Capsule (or other mass storage device) by dragging it into the iTunes window.
Connecting the Time Capsule (or other mass storage device) to the USB port of the Airport Extreme (or other wireless router).
Setting up Time Machine to use the volume partitioned for backups.
Possibly having to move cataloging files from my iTunes, Music folder to the external drive and pointing iTunes to the Time Capsule (or other mass storage device) through Preferences, Advanced to access the music.
Overall, I am concerned with the total cost. I just spent a lot of money, not only purchasing the MBA, but also the iPad 3 and upgrading my cell phone to the iPhone 5 (I skipped the 4). It seems that by the time I purchase an Airport Extreme and a Time Capsule, I could also have just bought a NAS like the Synology 213 with 2 X 1TB drives, connect it to the existing wireless router via ethernet connections and have a more comprehensive solution. Based upon these instructions and cost concerns (and bad experience), I have several questions related to this.
Does this configuration and these instructions make sense, including those for moving and accessing my music files through iTunes (i.e. will it work)?
Are both the Airport Extreme and Time Capsule necessary to make this work easily or can I purchase alternatives to either or each and if so, what is recommended? If they are necessary, would you recommend doing this or buying one of the aforementioned NAS's to a Mac newby?
Given the file structure for my music on the old external mass storage drive, can I simply move the folders over with the subfolders containing the musice files in them or do I have to literally enter into each subfolder, select all and move them subfolder by subfolder (i.e. album by album)?
Am I missing something totally better and easier solution?
I would be massively grateful to anyone who can provide some good answers, advice and guidance. I am about to pull my hair out!!!!
Thanks,
WinoSkiBoy

They both said about the same thing except the Apple Store business tech said to buy an Airport Extreme and just attach a partitioned external third party HDD to it.
Except that is flakey for TM backup..
http://pondini.org/TM/Airport.html
And slow as the proverbial dog.. although I guess the dog is old.
And totally inadequate as a media store or server.
Apple's pricing is pretty cunning.. I really doubt you are going to find a cheaper unit to do both wireless and TM backups than the TC. And it is a perfectly good device to do that. It is good to have in the network. And Apple sure make their products work with other apple products.. so it does work better than other similar cost products.. although you miss a lot of features that Apple predecided for you.
But I don't think anyone has the ideal solution to your problem. Apple believe in cloud. And if you have fibre internet that will work really well.. forks out your money and apple will store your stuff. But for the real world most of us do not have internet connection even a fraction of speed required. And it can be another decade before we will. We need a box that is half way between a TC and media PC, a file store and a NAS. Will Apple make one.. ?? I don't think so.. They believe in cloud..
You can make the missing link one yourself. If you are so inclined.. A HP microserver running freeNAS can do TM backups and makes an excellent media store because it can do AFP. You can put a graphics card in it and plug it into your TV. You can use it with a airport extreme. But you will need a degree in Geek.. !! The synology is a preconfigured form of that.. No Geekdom required. Synology seems to have the upper hand.. this week.
Let me make a suggestion.. Figure out if you are going to jump into the Apple way of doing stuff.. which is basically itunes on computer as a server.. and the whole network.. working as part of this.. so any media is pushed from a store in itunes.. whether local or internet.. if you want to do it that way.. getting something other than the air to run itunes is well worth it. That is what a NAS cannot do.. it cannot be a media player.
Or you do hybrid.. ie you don't use put all your media into itunes, you use a bit of this and bit of something else.. As long as that can play files.. stored on NAS or even on the TC without the itunes requirement.. It won't be as pretty. But it isn't hard to get working.. as long as you accept this isn't going to be the perfect Apple solution.

Is there ANY possible way to back up my Macbook (2009, running on OSX 10.5.8) using Time Capsule using a cable/not using the internet? I'm willing to come in-store to do this if necessary!

Time Capsule/Time Machine were working fine until about 1-2 years ago when my family started having troubles with the internet provider (AT&T). While on a 2 hr long phone conversation with them trying to fix it, they changed the wireless key code or whatever so Time Capsule could no longer connect to the network (icing on the cake - they didn't even fix the issue). And it had been so long since I had initially set up Time Capsule that I didn't know how to set it up again.
Situation is a bit more complicated now because I'm living on campus in another state, and the campus wifi is very slow/goes in and out a lot. They don't recommend connecting routers to their network bc they say it will make it even worse.
It just makes me really nervous that I haven't backed up my laptop in a couple years. I have thousands of priceless photos and years of hard work that I would very much like to keep safe. I paid all this money to have an external drive and am dying to continue using it! It just doesn't make sense that I can only use it wirelessly - there must be another way. I'm desperate to back up my laptop and will come to Genius bar if necessary to resolve this issue!
PLEASE HELP!!!

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

Time Capsule - OS Upgrade and External Hard Drive

Hi, This is my first request and am happy to have found this community helpful so far. It has answered many of my previous questions because somebody else had already asked. However, this time I’m not able to get all the answers since I have specific questions. Please help.
I have a Macbook (late 2008 Aluminum) with 2GB memory, Intel Core 2 Duo, 2 GHz running Leopard. I just went and bought these to start an upgrade project–
a. CD for Snow Leopard
b. Time Capsule
c. 4 GB memory (2*2GB)
d. 1 External Hard Drive – 1 TB Seagate GoFlex (running out of space in 160GB macbook)
I will buy these applications via Mac App Store after I have the OS upgrade:
e. iPhoto ‘11
f. iMovie ‘11
I have successfully connected time capsule and configured it as my router and have set it up as the time machine backup device (what a breeze!). Also, I have taken the first full backup of macbook and am ready to go. Before I go ahead with next steps, I have few questions:
Should I install the new memory first and then Snow Leopard or doesn’t matter?
Any advice for my memory upgrade? I found the instruction manual in Apple’s site and am planning to do it myself.
Any advice for my Snow Leopard upgrade or anything to be cautious about? I believe the instructions after I pop in the CD will be self-explanatory.
After I have done the Snow Leopard Upgrade, I believe I will still have access to my files in the time machine backup in TC from before the OS upgrade? The reason I ask is I am planning to delete/move files after the OS upgrade.
FYI – After the Snow Leopard Upgrade, I will upgrade to iPhoto ’11 and iMovie ’11 from ’08. I have the latest iTunes.
After I have Snow Leopard, iPhoto/iMovie ’11, I will connect the EHD to the TC USB port and am planning to move the iTunes Media and iMovie project/events to the EHD (found the instructions on this) and delete the media from the macbook internal drive to relieve space. Say, just in case my EHD crashes in the next 2 days after I do this, will I still be able to recover the previous media/project files from Time Capsule? Or do I need to copy the iTunes Media and iMovie project/events into the Time Capsule manually before I move it into EHD? Basically, I want to make sure I have 2 copies of my media, 1 in TC and 1 in EHD, since I am deleting it from mac’s IHD.
Now say I have the EHD connected to TC via USB and have moved my all media and movie projects into the EHD. So macbook is accessing the EDH wirelessly, as the source for iTunes and iMovie media. For performance or portability, if I plug my EHD directly into the macbook, can it seamlessly recognize it as the media source for iTunes and iMovie or are there any settings involved? I am just wondering since via the TC it was a shared drive, and now it’s a plugged-in EHD.
I know that Time Machine does incremental backups. Is there an explanation on this as to what is meant by hourly, daily and weekly backups and what are the copies made? I heard the hourly are replaced by daily backups and the daily are replaced by weekly, what does that mean?
This may not impact me now, but may be soon. Is it true that once TC is full, time machine will delete copies of the oldest backup? My concern is that I want to somehow conserve today’s backup for good. Is that do able?
Should I be concerned that time machine backs up every hour, since it may reduce my macbook’s performance during the backups? I know a way to reduce the backup frequency, am just trying to understand if it’s necessary to do so?
How do I use my time capsule as an external hard drive? The reason is I have another PC from which I want to copy files and store in TC as a backup.
I know I have many questions, but am hoping to get your expert advice. Thank you.

Hello, seems like you wanted to do pretty much what i wanted to do. that is free up space on lap top. But still have instant access to your itunes stuff. I found a solution that works for me.
I have a portable WD hdd attached to my time capsule via usb, i then access both through the capsules wireless connection, using the TC for time machine.
The Apple tv then accesses my itunes lib through my MBP via TC's wireless. I did however connect the WD Hdd directly to my MBP for the initial transfer to the apple tv, but itunes seems to find the lib as long as its there, doesnt matter if its connected to MBPs usb or the TCs usb. Sometimes it might revert to the default location, but i've found that if you click on a song it still plays, then if you close then reopen itunes every thing goes back to your external hdd...
Which means if you go away or want your itunes lib on the move you just need a little WD hdd.
I'm not totally sure if its worked yet but i connected my WD hdd to my MBP vie usb and told the TC to back up that too by going to options in TM preferences, seems to have worked, not sure if it would work while connected to the TC usb connection, doesnt seem to.
NB:Before you do this do a back up of everything in you Itunes Lib on your TC incase you screw up.
(For easy transfer of your itunes lib go to preferences on itunes and create a folder called iTunes Music on your Hdd then close preferences and allow itunes to do its thing, then in itunes go to
file - library - consolidate library, itunes. Itunes then makes a copy of all music on your new hdd. I then deleted the tunes off my MBP)
Just make sure you open your finder and click on the TC to wake the drive before you open Itunes other wise you'll have to go in to preferences and keep altering the location for your itunes folder. which can take i tunes a while.
This method seems to cope with video and music just fine.
Well hope that wasn't too confusing, as i confuse myself at times.
Good Luck.........

How do I install Airport Time Capsule with ATT Uverse when two of my modems are wireless?

I recently purchased an Airport Time Capsule so that I can back up multiple Apple devices. I currently have ATT Uverse and my internet provider. Also, two of my modems are wireless. How can I set up the Time Capsule so the the two wireless modems will still work?

I think you are using wrong terminology so can I ask exactly what is the model number of the wireless modem??
The Uverse is already a router.. and I guess you have cable service.. so there is no need for more modems.. more likely you mean you have two wireless routers and these should be setup as Wireless Access Points.. (WAP or AP). If they are working as routers then you have far too many routers. If they are working as modems you have far too many modems.
It is impossible to tell you how to setup the TC until we know what the setup is.
But let me suggest the most straight forward approach is to plug the TC into the Uverse by ethernet (it cannot be used by wireless.. so this is necessary). Run the TC in bridge mode.. and create a wireless network. Test if you then can access it from your network client devices and do backups from Macs.. if so there is no need for the wireless modems.. leave them off.

Remote access to Time Capsule won't work

Over the past couple of months I've been doing lots of research and planning into replacing my Mac Pro and old MacBook Pro with a new Mac setup. I was looking for efficiency, productivity and ultimate portability so the Macbook Pro Retina and Time Capsule grabbed my attention.
I was interested in the MacBook Pro Retina for work (travel) and home leisure use. Due to having so much music and video iTunes content, I was interested in purchasing a Time Capsule and a secondary external hard drive, placing all my iTunes content on the Time Capsule which I would then back up to the external hard drive when I was at home. I would then setup Time Capsule to be accessible over the internet so that I could view my media content through iTunes wherever in the world I was (internet speeds permitting of course). By doing this I could carry only my work files with me on the 512GB SSD Macbook Pro Retina, but could access the Time Capsule media files remotely, either via wi-fi or by tethering my iPhone 5.
So I purchased a Time Capsule to test my theory. I followed online guidance on how to achieve such a setup and using my 2008 MacBook Pro (which runs Snow Leopard) and a friends internet connection I got the system to work. I was able to remotely contact Time Capsule and watch High Def video content via wireless internet and even tethered to my iPhone. So I went and purchased a Macbook Pro Retina (running Mountain Lion) and set about setting up the system in the same way. But this is where something's gone wrong. I can't connect to the Time Capsule over the internet at all.
The Air Port utility has been updated to version 6 which is lacking the ability to instruct the Time Capsule to "Allow access over WAN". I thought I'd make sure it still connected via the internet using my old MacBook Pro, which had definitely worked perfectly just a couple weeks earlier, and that won't work either. I can't find the option to "Allow access over WAN" within Airport Utility 5.6.1 either? And the simple apple script application that I wrote (following an online guide) to open the remote connection to Time Capsule with the double left click on an icon has stopped working too.
I don't pretend to be a network engineer and I'm no I.T. expert, though I usually manage to teach myself what I need to know to sort issues like this out, but this has gotten me really stumped! I tried downloading an old version of Airport Utility to see if that had the "Allow access over WAN" feature (within the 'Disks' > 'File Sharing' area of Airport Utility) but my Mac OS won't allow the old versions to run.
Perhaps the version of Airport Utility I used on my Macbook Pro a couple of weeks ago didn't have the "Allow access over WAN" check box either and I just didn't notice - which is likely unless Airport Utility updates itself in the background without any prompts etc. I certainly didn't notice a software update for it any time over the past few days. Either way, I don't understand how it could have been working a few days back and now it's suddenly not.
I used this guides to gain remote access to Time Capsule successfully just a couple of weeks ago:
http://www.youtube.com/watch?v=SIQ7SzA1cK4
Can anyone shed any light on the issue and point me toward a fix please? I'd appreciate the help.

Thanks LaPastenague. I'm not sure if I have a static IP but I can confirm it hasn't changed in the past month.
I've pretty much come to the conclusion that what I want to do isn't really possible using Time Capsule. Like I mentioned, I had remote access working a couple of weeks ago but it seems like apple have updated the firmware or airport software to remove something that was necessary to remotely connect in the same way. And even if I did get it working I think it would still be so restrictive, requiring a fast wifi or mobile phone tethered connection to view my media files over the internet.
I got connected via iCloud and B.T.M.M. but the connection was very slow and video wouldn't stream well at all (painful). It seems that the speed constraints would make it very frustrating each time I simply wanted to look through my vast iTunes music collection or movie library. Album covers won't appear either.
Even if it were possible to connect via a static IP I just don't think that the WAN connection would be stable or fast enough to offer an efficint solution(?), so I'll probably have to by an external portable HD and use Time Capsule for Time Machine and Printer Sharing.
I wish I could stream my iTunes movies and music successfully over the internet, but right now it just doesn't seem possible.

How do I turn on SMB Sharing so I can access my Time Capsule remotely via iPad w/FileBrowser app?

I know I can share the time capsule, but I don't want to have to have my computer on, I just want to enable sharing and then access the files via File Browser on my iPad and Stream my movies and music stored at home.

Are you saying that your new Extreme no longer needs for you to enter the terminal script to enable TM backups to an AirDisk?
Yes, exactly that ... although since it is the Mac that runs Time Machine & uses its own system preferences, I don't think it is the new Extreme itself that makes the difference but instead some update to the OS (10.5.5, maybe?). As I understand it, so many users expected that in this respect an Extreme with a USB-connected drive would be the functional equivalent of a Time Capsule that Apple updated the code to support it, even without setting a hidden system preference for Time Machine to show (& use) "unsupported" drives.
IOW, I suspect the key is no longer necessary for anyone running up-to-date system software. If you want to check this, you can use the "defaults" terminal command to do so. For background info, see the Mac OS X Manual Page For defaults(1) for its purpose & options, but briefly its three major modes are "read," "write" & "delete." Using the "read" option as I did in my earlier post should tell you if the preference key/value pair exists & if so, how it is set. If you replace "read" in that command with "delete" it will delete the 'show unsupported' key:
<pre> defaults delete com.apple.systempreferences TMShowUnsupportedNetworkVolumes</pre>
You can also leave the key in place but set it to ignore the volumes:
<pre> defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 0</pre>
All I know for sure is that I never entered any 'defaults write' command for this on either of my Macs that run Leopard, & both do show the volumes attached to the Extreme in the Time Machine "Choose Disk" system preference -- but only after the volumes are mounted on those Macs in the Finder.

Setting up an Airport Express with a Time Capsule

Merry Christmas! I received a new Airport Express for Christmas. My intention is to use it to stream music to my stereo. I have to admit that setting the AE up was not as simple as I had hoped it would be. I do have it working but I would like someone with more experience in this area to validate what I have done.
My wife and I each have MacBooks and we have a Time Capsule as our base station in the den. I would like to use the AE to stream music to my stereo which is in the living room. I would also like the AE to act as a "booster" to my TC, which I think is called "Extending a wireless network".
Here are my questions concerning the settings I have used in Airport Utility:
In TC, under AirPort, and the Wireless tab, I have checked the box for "Allow this network to be extended". Is that necessary?
In AE, under Airport, and the Wireless tab, there are a number of choices in the pulldown for Wireless Mode. I know I do not want to "create a wireless network" since that is what my TC is for. But all three other choices seem valid for what I want to accomplish -- Participate in a WDS network, Join a wireless network, or Extend a wireless network. I chose Extend a wireless network. I also checked the box under Network Name that says, "Allow wireless clients". Are these settings correct?
Here's the problem I'm having with things set up as I described above. AirTunes works fine. But if we close either of the MacBooks (put them to sleep) and open them in the living room which is closer to the AE, we seem to lose internet connectivity. When we open a browser or click on a link, it starts to load but then freezes. If I then walk the MacBook into the den, closer to the TC and restart the Airport or put it to sleep and wake it, its fine. Also, if we work long enough in the living room closer to the AE, it will also loose connectivity. I can sit in the den near the TC without any dropping.
Any suggestions on what the proper Airport Utility settings should be for my TC and AE would be greatly appreciated.

Your biggest mistake is confusing signal strength with signal quality. The signal indicator indicates strength and nothing else. You need to be using iStumblr to look at SNR (Signal to noise ratio).

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

Want my DVR to use wifi from Time Capsule

We have two wireless networks in our house which seems stupid. Until now, we've shrugged it off and ignored the wifi created by the fios router and use a wired Time Capsule to create a wifi network that we use. Now, there's a new feature where we could watch tv in other rooms on our iphone, ipads, etc. That's great except the TV is on the wifi that came with the FIOS router instead of the wifi the rest of us in the house are using.
So, I googled about it to see what I could do to combine the networks. It turns out you cannot extend the fios wifi with the Time Capsule because the Apple Airport devices have features for extending networks that the fios wifi doesn't have. I found I could turn off the fios wifi but then the DVR wouldn't have an internet connection. So, I thought, I'll change the DVR ot use the Time Capsule wifi, which I'd prefer because we want to keep that network. I checked the DVR and found the home network settings -- and it turned out to be a place where you can see the settings, but you can't change the settings there, but there has to be a way to set it up somewhere, no?
Ideally, I'd turn off the FIOS wifi and change the DVR over to use our existing home network. At the moment, we will have to switch networks, depending on what we want to do. We use the Time Capsule for backups, to share files, for airtunes, etc. It also extends thru the entire house whereas the FIOS one doesn't. If we wanted to use the new features to watch programs from ipads, etc, we'd have to switch them over to the other network while we did. It's just a bit of a pain.
Any ideas? Thanks!

liz4cps wrote:
We have two wireless networks in our house which seems stupid ...
Many folks have two or more wireless networks in a single dwelling (including me). It doesn't seem stupid to me and if there's a problem, one or both wireless networks can be disabled in the router or Time Capsule settings.
liz4cps wrote:
We ... use a wired Time Capsule to create a wifi network that we use ... the TV is on the wifi that came with the FIOS router instead of the wifi the rest of us in the house are using ... I googled about it to see what I could do to combine the networks ... I found I could turn off the fios wifi but then the DVR wouldn't have an internet connection ...
Maybe it's just a terminology issue, but none of the Verizon STBs or DVRs has wireless capability. Presently these devices only connect to the network using coax, although this may change in the future.
liz4cps wrote:
... I thought, I'll change the DVR ot use the Time Capsule wifi ... checked the DVR and found the home network settings ... but you can't change the settings there, but there has to be a way to set it up somewhere, no? ...
No. As in my earlier comment, DVRs and STBs connect to the network via coax and are fed IP addresses via the FiOS router. That's how they get Guide data, VOD, etc.
liz4cps wrote:
... Ideally, I'd turn off the FIOS wifi and change the DVR over to use our existing home network ...
The DVR will always connect to the network via the FiOS router. However there is nothing to stop you from disabling the wireless radio in the FiOS router, and having all your wireless devices (but definitely not your DVRs or STBs) connect to your preferred wireless network. You can use whatever security features, SSIDs, and passwords you desire on the alternate device, and have all your portable devices connect there.
I hope this is clear, so please review the above and come back with further questions if necessary. Good luck.

Hello I'm having a no dns server problem on my time capsule

Hello I'm having this same problem:
Sammy Stefanki
Apr 11, 2012 2:20 PM
Hi everyone,
I just bought a new AirPort Express and Comcast is my ISP. I ditched my old Belkin wireless router, connected the Comcast modem directly to my AirPort Express, and it appears to be working great. I can access the internet wirelessly and also play music using AirPlay through my stereo speakers.
However, when I open the AirPort Utility, the utility tells me that I have two problems with my AirPort Express:
Apparently I have no internet connection (the utility tells me that "Your AirPort base station does not have a valid IP address."), even though I can access the internet just fine.
I don't appear to have any DNS server addresses (the utility tells me that "This AirPort base station doesn't have any DNS server addresses and might have trouble connecting to the internet.")
Does anyone know if these are serious problems that I need to address, or can they be ignored? I don't want to start tinkering with the AirPort Express's settings until I am better informed, because right now everything is working as far as my access to the internet is concerned.
and I tried to :
by Tesserax on Apr 11, 2012 2:25 PM
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
BUT NOTHING IT STILL SHOWS NO INTERNET CONNECTON on my capsule and NO DNS SERVER ...
I have tried to HARD RESET it resets ( with a Network Name (SSID) of Apple Network NNNNNN) and it connects to internet, it also says setuo complete in airport utility but once I go back into Airport utily cause Time capsule is still flashing amber it says NO INTERNET CONNECTION and NO DNS SERVER ...
anyone has any suggestions PLEASE and Thank you

Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
It sounds like you are connected to the Ethernet LAN port.

Using TIME MACHINE with a TIME CAPSULE

There's often a bit of confusion about this terminology: +*Time Machine+* vs. +*Time Capsule:+*
_*Time Machine*_ is Apple software that performs backups, to an external HD, a Time Capsule, etc.; and also allows you to browse and restore from them. It comes with Leopard and Snow Leopard, but cannot run on any previous versions of OSX.
A _*Time Capsule*_ is a piece of Apple hardware that combines a wireless router and hard drive, that can be used for Time Machine backups and/or other data.
Most Time Machine questions & problems are not unique to Time Capsules. For those, or if you don't find what you need here, try one of these:
Time Machine - Frequently Asked Questions
Time Machine - Troubleshooting
They can also be found in the *User Contributed Tips* section of both +Time Machine+ forums:
Mac OS X v10.5 Leopard > Time Machine
Mac OS X v10.6 Snow Leopard > Time Machine
Contents
|
QUESTIONS
*Q1. How do I set up Time Machine to back up to my Time Capsule?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*
*Q3. Can I use my Time Capsule for Time Machine backups AND other data?*
*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*
*Q5. Should I delete backups? If so, how?*
*Q6. How do I back-up my Time Capsule and/or USB drive(s) connected to it?*
If you don't see your question here, try the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
QUESTIONS
|
_*Q1. How do I set up Time Machine to back up to my Time Capsule?*_
|
First, set up your Time Capsule via +Airport Utility.+ Keep the name you assign to it, your Computer, and your network short (under 25 characters), and avoid embedded spaces, special characters, and punctuation (see item #P1 below for details). Make sure your Mac can connect via an Ethernet cable, if at all possible, as well as wirelessly.
The setup and first backup (of your entire system) will be much faster if you connect via Ethernet.
|
a. If the +Time Machine+ icon isn't already in your Dock, drag it there from your Applications folder. See below for more about it's use.
b. Right-click it and select +Open Time Machine Preferences,+ click the +Show Time Machine status in the menu bar+ box (see below), then click +Select Disk+ (on Leopard, this button will be either +Choose Backup Disk+ or +Change Disk).+
c. A list of possible destinations will appear. It should include your Time Capsule (with the name you gave it via Airport Utility), and may show other internal or external drives as well. Select your Time Capsule and click the +Use for Backup+ button.
d. A prompt for your name and password will appear. In some cases there won't be a Name field, but if there is, enter your short user name. Also enter the password you set up for the Time Capsule via Airport Utility, then click the Connect button.
e. A 120-second countdown to the start of your first backup will appear in the +Next Backup+ area of the TM Preference panel.
|
Note that this first backup will copy the entire contents of your system, except for a few things that are skipped automatically, such as system work files, most caches, your logs, trash, etc., and anything else you may have excluded (see #10 and #11 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum). So it will be rather lengthy, depending on how much data is on your system, whether you're connected via Ethernet or WIFI, and if WIFI, how good the signal is.
You can continue to use your Mac while TM is backing-up, and you can even cancel a backup if necessary, but to make this first full backup as fast as possible, try not to overload your Mac or cancel the backup.
|
_*The Time Machine Icons in your Menubar and/or Dock*_
|
In the steps above, you dragged the TM Application's icon into your Dock, and clicked the +Show Time Machine status in the menu bar+ box.
For detailed info about them, see question #24 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
+Go to Top+
_*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*_
|
Mostly the way you set it up to use the Time Capsule's internal HD.
But first, attach the drive directly to your Mac, and erase and format it per the instructions in #5 of the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. Note, however, that it doesn't matter whether you use the +Mac OS Extended (Journaled)+ or +Mac OS Extended (Case-sensitive, journaled)+ Format, since Time Machine will put your backups in a sparse bundle that's case-sensitive. You cannot change that.
Unlike the Time Capsule's disk, you can partition the USB drive. That's highly recommended if you're going to be putting other data there, so the backups don't completely fill the disk (but be aware that Time Machine cannot back that "other" data up. See question #Q6 below).
If you're backing-up multiple Macs to the same drive, you can make one partition for each, but it's not as helpful on a network drive, because each Mac's backups will be in a separate sparse bundle. So you can let them share the disk or a partition.
Also note that if you've been doing backups to an external disk connected directly to your Mac, you cannot continue the same set of backups when you connect it to your Time Capsule. They are stored differently, and Time Machine will put them in a sparse bundle, alongside but *completely separate from* the backups made locally, and the first backup will be a full backup of your entire system.
Once the USB disk is set up the way you want it, use the setup procedure in question #Q1 above, but in step (c), select the USB drive/partition, not the Time Capsule's internal HD.
*RAID Sets connected to a Time Capsule:*
|
Time Machine will back up to a +Hardware Mirrored RAID set,+ also called +RAID 1,+ (sold that way, with multiple drives in the same enclosure). However, if you partition the +Hardware Mirrored RAID set,+ once you start using it with TIme Machine, you cannot change the sizes later and continue to back up to the same set of backups.
While you can connect multiple USB drives to a Time Capsule via a USB hub (a powered one is best), Time Machine +*will not+* back up to a +software Mirrored RAID+ set (where you combine the drives into a single volume via Disk Utility).
+Go to Top+
_*Q3. Can I use my Time Capsule for Time Machine backups and other data?*_
|
You can put other data on your Time Capsule's internal HD, but there are three major considerations:
Especially for things like photos and videos, access may be too slow for convenient viewing, and worse for editing. So test this a bit before you decide what to put there.
Time Machine cannot back-up that other data, so you'll need some other method. See question #Q6 below.
Time Machine will, by design, fill up all the space available to it, so there may be a conflict between the sparse bundle it puts your backups in, and the other data. There is a workaround, to "reserve" some space there, by creating a disk image of the desired size and storing your data there, but it's a bit cumbersome, and two Macs can't share it at the same time.
An alternative is to connect a USB drive to your Time Capsule. Then you can back up to the TC's disk and use the USB drive for other data, or vice-versa. But note that Time Machine cannot back-up the USB drive while it's connected to the TC (see question #Q6 below).
If you want to reserve space on the TC's internal disk, here's how:
|
a. Start the +Disk Utility+ app (in your Applications/Utilities folder). Click the +New Image+ icon in the toolbar (or select +File > New > Blank Disk Image+ from the menubar). If the little arrow to the right of the "Save As" box points down, click it so it points up.
b. Give it a name in the "Save as" box. This name will appear on the TC's disk, with ".dmg" appended. (Similar to the way the sparse bundle containing your Time Machine backups appears, with ".sparsebundle" appended).
c. Click your TC in the sidebar. It may take a few moments for Disk Utility to recognize it, and show it in the center pane.
d. In that center pane, select the blue Share folder for your +Time Capsule+ (you may need to scroll down, or enlarge the window, to see it). Once selected, you'll see any existing disk images in the right pane.
e. Give the Image a name. This name will appear on your desktop and/or Finder sidebar when you mount the .dmg by double-clicking it, if you have the +External Disks+ box checked in +Finder > Preferences > General+ or +Finder > Preferences > Sidebar.+
f. Select the Size for the amount of space you want to reserve, either one of the pre-sets or Custom which allows any size. Avoid taking all the remaining space for the disk image, as Time Machine needs a bit of room to operate. Also note that if very little space is left, it will begin deleting old backups very soon, to make room for new ones.
g. Select the desired Format, probably the default of +Mac OS Extended (Journaled).+
h. If you want it encrypted, select the desired type.
i. Select single partition, either GUID or +Apple Partition Map.+
j. Select +Read/Write disk image+ for Image Format.
k. Click the Create button. The larger the image size, the longer this will take.
|
When complete, the new disk image will be automatically mounted on your Mac's desktop, ready to receive the files you want to move into it. (When you first open a disk image, there may not be a sidebar and/or toolbar; if so, select +View > Show Toolbar+ from the Finder menubar.)
To access this disk image from another computer, you must first eject it from this one, since only one can mount it at a time. Otherwise, the other one will see a message that the disk image is "Temporarily unavailable."
Note that you may be able to change the size of the disk image later, via +Images > Resize+ from the Disk Utility menubar (while the disk image is not mounted or selected in Disk Utility's sidebar).
+Go to Top+
_*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*_
|
You can attach a USB drive to your Time Capsule. Then you can back up to the USB drive instead of the Time Capsule's internal HD. If you have multiple Macs, you can back some up to the TC's internal drive, and others to the USB drive.
If you need even more space, you can connect multiple USB drives via a hub (a powered one is usually best), and back up different Macs to each. What you cannot do, however, is have one Mac's backups continue from the Time Capsule's internal HD to a USB drive connected to it, or have the backups for any one Mac "span" two drives.
The exception is, you can connect two (or more) drives that are in a +concatenated RAID+ set (sometimes called +RAID 0).+ In that configuration, all the drives in the set are treated as a single volume (see +Concatenated RAID+ in the Help for Disk Utility for details). This configuration may cause some other difficulties; once they're in a RAID set, you cannot connect any drive to your Mac separately -- it's all or none. And if one drive fails, you risk losing everything on all the drives in the set.
See question #Q2 above for setup instructions for backing-up to the USB drive.
+Go to Top+
_*Q5. Should I delete backups? If so, how?*_
|
It depends on exactly what you want to do, and why.
Under normal circumstances, you shouldn't have to delete anything. TM automatically "thins" (deletes) backups every time it does a new backup, on the following schedule:
"Hourly" backups after 24 hours (except the first of the day, which is a "Daily" backup).
"Daily" backups after a month (except the first of each week, which is a "Weekly" backup.)
"Weekly" backups are kept until TM needs the space for new backups; then one or more of the oldest weeklies will be deleted.
However, TM will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup. So all that's actually deleted are copies of items whose originals were changed or deleted before the next remaining backup.
But if you do need to delete backups, here's how:
To delete individual backups, or all backups of selected item(s), see #12 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
To delete everything on the Time Capsule's internal HD, use +*Airport Utility.+* Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
To delete everything on a connected USB drive/partition, you can delete via the Finder, but that may take a very long time. It may be faster to disconnect it from your Time Capsule, connect it directly to your Mac, and use Disk Utility (in your Applications/Utilities folder) to erase the disk/partition.
To delete all the backups for one Mac, without disturbing anything else on the Time Capsule's internal disk, open the TC via the Finder and delete the sparse bundle associated with that Mac.
To delete all the backups for one Mac, without disturbing anything else on a connected USB drive, either open the USB drive via the Finder and delete the sparse bundle associated with that Mac, or disconnect the drive from the TC, connect it directly to your Mac, and delete the sparse bundle from there.
+Go to Top+
_*Q6. How do I back-up my Time Capsule and/or attached USB drive(s)?*_
|
That depends to some extent on what you want to back up, and where it is.
It's generally not a good idea to try to back-up your Time Machine backups. If there's a problem with them, it will be copied to (and perhaps magnified on) the copy.
A better solution is probably to use either Time Machine or a different application to make separate, independent backups of your Mac, to a different destination. A portable external hard drive is great for this; you can periodically connect it to your Mac, make a backup, then take it to a secure off-site location, so you're protected against fire, flood, theft, direct lightning strike on your power lines, etc. If you use Time Machine for this, you'll have to use the disk selection process each time you want to switch, via +Time Machine Preferences.+
Many folks use the CarbonCopyCloner or SuperDuper! apps to make "bootable clones" of their internal HD to an external HD. While these usually don't have "archived" copies of previous versions of things you've changed or deleted, you can boot and run your Mac from them if your internal HD fails. Your Mac may run a bit slower, but it will be usable. Both are easily found via Google.
Since Time Machine cannot back up your Time Capsule's internal hard drive, or a USB drive connected to it, if you have other data there, you'll need a different method to back up that other data.
In a pinch, you can disconnect a USB drive from your Time Capsule, attach it to your Mac, and copy or back it up that way.
|
There is a procedure that will let you "archive" the TC's internal disk to a USB drive connected to it.
But it's not quick, since since the data must be read from the TC's internal disk to your Mac, then sent *back through the Time Capsule* to the connected USB drive. And it's "all or nothing" -- you can only use this procedure to copy the entire contents.
All users will be disconnected from both the internal HD and the connected USB disk (but the network will remain usable).
Attach a USB drive with at least as much free space as the total amount of data on the TC's internal HD (see #5 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for formatting instructions).
Turn Time Machine "Off" via +Time Machine Preferences.+ Stop all processes that may be accessing the Time Capsule's disk. If possible, connect your Mac to the Time Capsule with an Ethernet cable -- it will still be slow, but faster than WIFI.
Then follow this Apple procedure: Using AirPort Utility 5.3.1 or later to make a copy of the Time Capsule disk.
+Go to Top+
PROBLEMS
|
_*P1. The Backup disk image could not be created.*_
|
Oddly enough, Time Machine can be rather picky about the way certain things are named.
Check your +*Computer Name*+ at the top of the System Preferences > Sharing panel.
It must not be blank; it should not be more than 25 characters long; and you should avoid punctuation, spaces, and special characters.
After changing it, click the Edit button and make the corresponding change to the +*Local Hostname.+*
If that doesn't help, apply the same rules to the name of your Time Capsule and Network, via +Airport Utility.+
+Go to Top+
_*P2. Time Machine could not complete the backup .. sparsebundle could not be accessed. (Error 109).*_
|
The sparsebundle containing your backups is corrupted.
Try Repairing it, per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If the sparsebundle is on your Time Capsule's internal HD, and Disk Utility can't fix it, your only option is to delete it (or erase the TC's disk), and let Time Machine start over. You may be able to prevent this from happening again by changing the names per problem #P1 above.
If the sparsebundle is on a USB drive connected to your Time Capsule, and Disk Utility can't fix it, it's possible a heavy-duty 3rd-party +Disk Repair+ application, such as +Disk Warrior+ can. (You'll have to connect the drive directly to your Mac.) These are not cheap, and there's no guarantee they can fix it. Be certain whatever you use is compatible with your OS. For Disk Warrior, you need at least version 4.1.1 for Leopard, 4.2 for Snow Leopard.
+Go to Top+

This tip is ready for consideration.
It is an update to the current Tip at: http://discussions.apple.com/thread.jspa?threadID=2296894
Changes:
Q1: replaced info about the TM icons with a link to the TM FAQ tip.
Q2: added info about RAID sets attached to a TC
Q6: reworded a bit and replaced last paragraph with a link to the Apple article.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How do I manage multiple macs on my Time Capsule?

I have a 2 TB Time Capsule 4th generation w/ multiple macs backing up to it. I want to be able to manage ALL files on Time Capsule. Is there a way for me to see all the data from all macs on time capsule, and delete those files if necessary? (This has to do with my kids going off to college and me needing to free-up space.)

anthony142 wrote:
Is there a way for me to see all the data from all macs on time capsule, and delete those files if necessary?
See item #17 of this post.
If you want to delete all Time Machine backups for a particular Mac, just mount the Time Capsule's disk (probably called "Data" unless you renamed it), then drag the appropriate "sparsebundle" file to the trash.

Adding Time Capsule (for Multicast DNS) to existing router

I have recently moved into a place where I am sharing internet with others (family).
My macs can see their PC's. My macs cannot see my macs.
Wireless Macbook Pro
Hard wired Mac Pro into Netgear router.
I am pretty sure it's because their router, (Netgear, has regular and 5g band) does not have multicast DNS capability, which I understand is necessary for macs to see each other on the network.
I have an older Time Capsule (the one with one band, and no guest login network) that works just fine when it's configured to be the only router on the network. It's worked for years at my previous place using DHCP thorugh a DSL modem.
Question: How do I add the Time Capsule to this network to get Multicast DNS capabilities? OR... is there a different way of getting my macs to talk to each other and still have the internet work?
My relative is a gamer and very particular with his electronics and I don't want to 'remove' the Netgear router from the equation, but I do want my macs to sync up. I run sync jobs to keep certain folders up to date in two places. (No, I don't want to use a cloud for some of this stuff). I have limited experience configuring networks -- I tried plugging in the time capsule into an ethernet port on the netgear router, but I must have configured it wrong because there were conflicting IP addresses and the internet became unusable.
Thanks in advance.

The TC should work ok in bridge mode.
Just go into the airport utility and ensure your TC is bridged.
All routing should be happening on the Netgear.
The printers should then be accessible to the computers.. BUT the TC seems to hate new setups.. I strongly recommend you simply factory reset it and redo the setup.
Use SMB type names.. that means short, no spaces and pure alphanumeric.
And sometimes if you want to print the client will have to connect to the TC and not the Netgear. Mavericks in particular seems to have real issues working with a TC that it is not immediately connected to.
I run somewhat similar setup and right now my airport utility utilty shows the entire history of my network fiddling.. i will have to figure out how to reset airport utility.
As you can see nothing is available because I am plugged into the main router.. my equivalent of your Netgear.
Now I turn on wireless and connect that directly to the TC, lo and behold, the world comes to life.
That is because the new airport utility totally depends on wireless. It is absolutely useless if you use ethernet.
Also remember to check the computer has ipv6 set to link-local.
Apple have made this essential part of the airport network.. you should do this for both wireless and ethernet in the computer. And check that it is set correctly in the TC.
So for example here is what wireless in the computer looks like.
And in the TC. It is in the internet tab under the internet options.

Is Time Capsule necessary?

Similar Messages

Maybe you are looking for