IS-U contract account field under R/3 quotation side

Dear Friend,
As I have a requirement called IS-U contract account field should be available in R/3 quotation side.
what is the configuration for this, and I did the config for IS-U and SD side integration(reference field under FPP1), but the contact account field is not available.
Can you please help me to know this.
Thanks in advance.

Hi Alin,
Thank you for your reply.
I'll try to explain these in some more detail :
1/ We have a system landscape which includes ECC/IS-U & CRM
2/ We have different scenarios active:
- We have a scenario where IS-U is not involved, meaning SD customers (=ECC customers in the Sales & Distribution Module (KNA1)) are replicated to CRM
- IS-U business partners are replicated to CRM. But not all IS-U business partners have an SD customer record active. When billing needs to be done for such a customer, an SD customer is created for this ISU business partner (from within ISU), using a reference customer in SD. Apparently this also seems to trigger a SD customer create sent from CRM which causes our problem ...
There is no master system. Business partners can be created both in ISU and CRM, and should the be replicated in the other system
Hopefully this clarifies it for you.
Thank you very much in advance!!
Michiel

Similar Messages

Configuration settings for Contract account create\change\display transacti

Hello all,
Does any one know IMG path for settings for contract account related activities (Tcode - caa1\caa2\caa3). We have 2 systems of SAP ISU. One system shows various fields blocks under 'General data' tab like 'Account management data', 'contract account remarks', 'invoicing', 'associated work activity' while other system only shows 'Account management data' and 'associated work activity' that too with very less no of fields in there.
Is it because of any functional settings through IMG or is there any other reason?
Regards,
Abhi

Hi ,
In IMG there is a setting where in you can make settings for the fields of activities like contract account create , change , display .
Following is the navigation for the same .
SPRO - Financial accounting ( new ) - Contract accounts receivable and payable - basic functions - contract accounts - field modifications - configure field attributes per activity .
Here you can make the necessay settings for your activities as to you want to make the field as hide , display , mandatory etc.
Secondly , in case of authorizations - System checks for following Auhtorization objects ;
F_KKVK_BUK - For co code .
F_KKVK_VKT - Contract account type .
F_KKVK_BEG - Aurhoization group in contract account .
E_REGIOGRP - Regional structure group .
do revert back in case of anyother issues .
Regards ,
Dewang T.

RERAPL (Posting Log) - Selection screen Contract Type field

Hi Forum
Is there a way to see the landscape specific contract types defined under 'Contract Type' entries(F4) list of RERAPL selection screen rather the generic list ?
i.e. in RERAPL selection screen, for 'Contract Type' field under 'More Fields' section of 'FI Document for Selection' area, only the generic list of contract types viz., Loans, Securities, Foreign Echange etc is seen. Why not the list what has been created in RE Contract Types is shown here ?
Please advice.
Regards, Sekhar

Hi Sekhar,
reason is that the field 'contract type' in the selection for FI document is not the contract type known in RE.
contract type field in FI document is 1 CHAR (technical field name VERTT) and contains the information to which application the contract number refers in the FI document line.
The 4 CHAR contract type in application RE-FX (technical field name RECNTYPE) is used in RE-FX only and not stored in the FI document. Therefore it is not possible to select FI documents by this contract type.
Hope this information is helpful for you.
Regards, Franz

Custom field in Contract Account ( CAA3 ) using BDT

Hi,
I need help on BDT Configuration.
I have been trying to add custom fields in the Contract Account, under Payment/Taxes Tab using BDT.
I have followed all the basic steps required for the configuration but still the fields donu2019t seem to appear.
I did refer to BDT Developers Manual from SAP.
Can anyone help?
Thanks & Regards,
Rahul.

By Using CAWM area menu t-code you can do the screen enhancements.
After adding fields to field group
Create a view and add this to field group, Create a screen and add ur fields and write code to update those fields in database..
Add your view to the corresponding section.
After this you have to call BUSP t-code , Application object as FICA and activate all screens.
Let me know if you need any more help..
Regards,
Shiva Kumar

Field changes on Contract Account change(CAA2).

Hi guys,
I am using BDT to add an checkbox on the Contract Account -> General Data ->
Account management data, and I want to save the change log of this field (checkbox), so after the user changed it, the user can see the change logs by clicking Extras->Field changes on the menu.
Thx in advance, points will be rewarded.
Vincent.

you can control break statement is of at new and print that description what ever you want and end with endat.
thanking you

Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe)

Hello,
Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe). The only time this happens is if a domain account is deleted and the remnant of the account remains and has to be removed
manually. However all of the accounts, with the exception of any new ones recently added, now show the account name only. Any ideas on what caused this and how to fix it?
Thanks :)

Hi,
I have not heard from you for some days, currently I am providing the related article for you. Hope this will help you on this matter.
The UNIX Attributes tab does not appear in the Active Directory Users and Computers MMC snap-in when Server for NIS is installed in the domain
http://support.microsoft.com/kb/921913/en-us
Thank you.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Contract Account Screen Enhancement - CAA1/2/3

Hi all,
I am in need to Enhance the contract account screen for the well known transactions CAA1/2/3. Now the requirement is to add a new tab named "Add.Info" along with the existing tabs for the main screen. The new tab once defined will have some custom fields on different field groups. Hope if anyone has worked earlier on this type of requirement may throw some inputs.
Appreciate your timely response.
Regards,
Jagath.

HI,
You need to use BDT(bussiness data toolset) to add the filds to this CAA1,
1) TCode: CAS2
Creat the Field group 123 where the field have been added
Double click in Menu path:
Field Groups ->Fields
2) TCode: SE51
Created the layout set with the new field Name
3) TCode: CAS3
· Created the view XXX where we have to assigned following things---
a) Application-VKK
b) Standard Program name -SAPLZKKC
c) Screen Number-0700
b) Two FM Z_TEST_PBO and Z_TEST_PAI
In PBO passing the value from screen to program using Field symbols
In PAI passing the value from program to database, where the database gets updated using the FM VKK_FICA_FKKVK_COLLECT
· Assign Field Group to View XXXX
4)Double click in Menu path:
View àField Groups
Next Using New Entries provided in application toolbar assign the Field Group XXX.
5) TCode: CAS4
Created the Section and assigned the View ZKK510 to it.
Double click in Menu path:
SectionàView
Next Using New Entries provided in application toolbar assign the View ZKK510.
6) Tcode: CAS5
Created the screen ZKAT1 and entered the details as:
Double click in menu path:
Screenà Section
Next Using New Entries provided in application toolbar assign the Section ZKK510 and VKK100.
7) Tcode: CAS6
Assigned Screen ZKAT1 for the standard screen sequence VKK1
Double click in Menu Path:
Screen Sequence à Screen
Next Using New Entries provided in application toolbar assign the screen ZKAT1.
8) Tcode: CAS7
Standard event DSAVE can be used to save the database (if we dont use field symbols to update the database) under this event we copy the standard function module VKK_FICA_EVENT_DSAVE for the application VKK to ZZ_VKK_EVENT_DSAVE and modify this FM which can be done as
In this FM we will use the standard FM VKK_FICA_FKKVK_COLLECT to update the database table FKKVK
Code is written as :
CALL FUNCTION VKK_FICA_FKKVK_CO
EXPORTING
I_SUBNAME = CI_FKKVKI'
I_FKKVK = FKKVK.
DATA: IT_FKKVK LIKE FKKVK.
IT_FKKVK-ZZCOLECT1 = CI_FKKVK- ZZCOLECT1
IT_FKKVK-ZZPOR_CTR1 = CI_FKKVK- ZZPOR_CTR1
CALL FUNCTION VKK_FICA_FKKVK_CO
EXPORTING
I_SUBNAME = CI_FKKVKI'
I_FKKVK = IT_ FKKVK.
Hope you understand the code,
Thanks
Sudheer

JDC addr on contract account populated from standard mailing address...HELP

Hi, I am having a problem with the JDC address field on the Contract Account being updated with the standard mailing address when the customer uses a different mailing address other than the service address (connection object). This is causing an issue when we try to post FICA charges or dunn at an account that is using an out of state mailing address.
Has anyone had this issue? What did you do? I was under the impression that the JDC addr field was being populated from the connection object.
Thanks

Hi Lisa,
Every Contract Account picks up the standard address from the Business Partner. However you could control this by Changing the fixed address at the contract account level. If you go into transaction CAA2 ... You will see the header as seen below..
Contract Acct   200000012853 Cont. Acct Cat. 02 Utilities Contract Account
Partner/Address 1000145433   ROMA HAWKINS    227 CHERRY AVE / HAMPTON VA 2
Valid from      07/17/2008
Next to the Address here you can see a FIX check box. We can create a new address as per the connection object address on the BP address list and FIX the CA address based on the new address in the Business Partner.   Similary the JDC address also can be changed this way.
However this is a manual process. If you want this to happen during the move-in process, custom code will have to be written wherein when a new contract account is created, the list of addresses are shown to the Customer Service Agent and ask them to pick the Address which will be set as the FIXED address in the Contract Account. We had once implemented this enhancement for a Utilities customer in US. Let me know if you require details.
Regards,
Yuvi.

Find information about menu CAWM (extend contract account)

Hi all,
I need to add two new fields to the contract account. I know there is a menu CAWM to extend the CA, but I can't find any information about it (neither here at SDN nor at SAP help nor at SAP notes).
So my question: Where can I find detailed (step by step) instructions on how to use the CAWM transaction? I need some kind of technical manuel or reference.
Thanks in advance!
Kind regards, Matthias

Hello,
CAWM is an area menu transaction. You cannot directly use it like other T-Codes. You need to use via T-Code SE43<<press F6 for change>>.
You may need to add info under
Contract Account control\Screen Layout\Field Groups.
You add your new fields here.
Hope this helps
Rgds
Rajendra
Points!

Creation of new fields under sales tab in XD01

Hello,
I have to create a new field under the sales tab in XD01. Please let me know how i can do this? or is there any other way of adding the new fields to the customer master..
Thank You!!!!
Suresh

Hi,
you can add to fields with customizing a cross the below path:
Financial accounting/accounts receivable and accounts payable/customer accounts/master data/define screen per activity (customers),
but i dont know how add new fields,
regards,
David

How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?

How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
I’m creating a form where the user has three options to make a payment.
1. charge to my credit card
2. charge associated costs to bank account
3. By cheque or money order
My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
Thanks in advance guys

You will have to use custom JavaScript to access the various properties of the field object.
The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
Disabling (graying-out) Form Fields
>> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
If you want actual code you need to provide a lot more details.
It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas.

Relationship Between BP, Contract, Contract Account and industry

Hi,
Anybody can send the relatonship diagram between BP,Contract, Contract Account, and Industry , with Relation ship fields,
Regards,
Sivakumar.

Can u send me your mail id, So that i can mail u.
These relation is your business specific.....
If u want i can send you.......
Regards,
Shiv

BDOCs not triggering on changin Contract Account thrU FM FKK_ACCOUNT_UPDATE

Hi,
We have integrate SAP ISU and CRM system. My scenario is, on Dunning til a specific level, customer is removed from Direct Debit if he's on an active Incoming Payment Method in a dunning activity.
In my scenario, I'm reading Contract Account Details using FKK_ACCOUNT_READ, deleting incoming payment locks if any, clearing three fields of Incoming Payment Method Id, Bank ID and Credit Card ID (EZAWE, EBVTY, CCARD_ID) and then passing the new structure in FM FKK_ACCOUNT_UPDATE in below format:
        CALL FUNCTION 'FKK_ACCOUNT_UPDATE' IN UPDATE TASK
          EXPORTING
            x_fkkvk                 = wa_fkkvk
            y_fkkvk                 = wa_fkkvk_old
            vk_upd_mode             = lc_change
            udate                   = sy-datum
            planned_or_real_changes = lc_real
          TABLES
            x_fkkvkp                = lit_fkkvkp
            y_fkkvkp                = lit_fkkvkp_old.
But it is not triggering any BDOCs and therefore DD details can still be seen in CRM system.
I checked the standard process (CAA2), also uses the same FM in same format but it triggers BDOCs. I believe after this FM is called, some other FMs are being called to trigger BDOCs.
Can someone help me in finding out, where am I going wrong. Thanks.
Ravi

Use BAPI_ISUACCOUNT_CHANGE instead.

Contract account not found and replicated to ISU

Hi Experts,
Our users created s3 contract account in the Production system. But upon searching for 2 of them
they are not able to find these two contract accounts in CRM as well on ISU side.I have also checked the queues and Bdocs if any one of them got failed but I am not able to find those as well.
Can any one guide what can be done to find them and replicate the same to ISU.
Regards,
Manish
Edited by: manish.dodeja on Jun 25, 2009 11:11 AM

Hi Haresh,
Check with middleware settings there must be something left out like in T.Code SMOEAC (Check Publication and Subscription) Business Agreement should be there..
Check T.Code: CRM_BUT_CALL_FUN
Depending on the business agreement class, the contract account templates are stored in SAP ERP
in table TFK_BUAG_REF.
You can find this table in Customizing for
Financial Accounting under Contract Accounts Receivable and Payable-> Integration->Customer Relationship Management-> Business Agreement ->Determine Template for Contract Account for Replication
Use FI-CA event 1023 to determine whether the busines agreement should be selected as a standard business agreement when it is downloaded. You can check the contract accounts of the business partner and decide whether you want to select the checkbox.
Also check FI-CA event 1022 (see tables TFKFBM,TFKFBS, and TFKFBC in SAP ERP).
Let me know if your issue is resolved
Regards
Ripunjay

Error while creation of Collective contract account

HI experts,
While creating Collective contract account thru CAA1,i am getting Error as "is collective invoice acct category but collective invoices not active" though i have defined no ranges & have done necessary config. Pls help me in this regard thru ur valuable experience.
Regards,
Raman

Hi Raman,
That should be error >3573.
Set field 'Collective Bills' (XUSSR) in table TFK000C and that should workout for you. Through SM30 or
Customizing -> Fin Acctg -> Contract Accounts Receivable and Payable -> Basic Functions -> Posting and Documents -> Basic Settings -> Maintain Central settings for posting.
Best regards,
David
Edited by: David Tonade on Nov 27, 2009 3:39 PM

IS-U contract account field under R/3 quotation side

Similar Messages

Maybe you are looking for