IS-U-IDE Multiple Datex Exchange Format per Service Provider

Hi,
Can anyway one tell me if it's possible to assign a Datex Exchange Format (DEF), to a Service Provider(SP) on the same date?
The propose is to receive more that one Message version, from the same SP.
Thank in advance,
KR,
AAL!

Hi,
You can change the datex format for the service provider...
For this, Go to the service provider change transaction or in Area menu->Tools>IDE->service providers...
Select the service provider and click on change...
There is a tab for Format, You can assign the datex format that is desired for the service provider...
At a time slice, you can assign only one datex format for the service provider...
Reward if useful
Regards
Shiva

Similar Messages

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

SAP CRM with multiple MS Exchange Servers

Hi all,
I would like to use a SAP CRM 7.0 system with multiple MS Exchange servers. It is possible to forward emails from these Exchange servers to the SAP WAS via SMTP, so that SAP ERMS functionalities can be used to process the emails?
Thank you,
Till

The answer is yes. You need to just setup the exchange servers to route the e-mail to the inbound SMTP port setup on the CRM WAS server. You will then configure the inbound e-mail address on the WAS to map to the ERMS service.
CRM does not care how the message got sent to it, it just needs to be dropped off at that location.
Take care,
Stephen

Any idea how to exchange the CTI-OS Lincense with CAD License?

Any idea how to exchange the CTI-OS Lincense with CAD License?

Hi,
I think that you only have to install the CAD component in the PG or another machine.
If you need a file license, contact your AM in order to get an upgrade from CTIOS to CAD.
Hope this helps,
Juan Luis

Multiple size and format exports

Is there a way to hit the export button on a selection of images one time and produce multiple sizes and formats of each image? Maybe an automator script.
It would speed things up if you didn't have to go back and choose a different format from the drop down list and start the export over again for each different size that you need.

I was just doing something similar recently, I agree it would be nice to have something easier to do just this...
I think the simplist way would actually be to write an export plugin using the new Export API, it would be truest to what you are probably trying to produce (I was creating a series of different resolutions of the same image for a web page). It would be trickier though.

Currencies Exchange rate per Customer

Hi Experts,
Is there anyway in SAP to maintain Currencies Exchange rate per Customer. For e.g. the customer's currency is EUR and my local currency is USD.
Meaning we want to maintain a fixed exchange rate for that particular customer, so during creation of Sales Order, system take this fixed rate instead of taking FI - Currencies Exchange Rate table.
Thanks,
Kiran D

Hi Kiran,
Just check the Currency field available in the customer master Sales Area Data --> Sales tab. The currency maintained in this field is determined in Sales order.
Hope it works.
REWARD if it helps you!!
Regards,
Ajinkya

Saving .idml exchange format

What AppleScript command and parameters export a document to InDesign exchange format? Extension .idml Tried various combinations with no luck. Thanks! Hanaan

Great, glad to hear that worked for you.
Still having problems on mine. I'm sure you're right, it does need to refer to a parent story, but I'm still getting the same error. My relevant code is this:
set myStory to parent story of myFrame
export myStory to myExportPath format InCopy markup
"myStory" does return a reference to a story ID, so all looks well there, as does the path under "myExportPath". Just to test it, I substituted your "choose file name" code, and it did bring up the prompt, but then choked at the same place, at the format, telling me it was expecting InCopy markup but received InCopy markup. Grrr argh. BTW, I'm on CS4, if that makes a difference here.
Maybe it's just time to reboot.
Thanks for your help.

Performing Exchange Server patching & service pack for mailbox server without losing some data during the rollback ?

People,
I'd like to know how can I safely apply the Exchange Server service pack or cumulative update to the Mailbox Server role (no DAG) without losing some email during the downtime and rolling back the snapshot ?
Can I do the following:
1. Stop all of the Exchange Server services.
2. Disconnect the vNIC in Mailbox server
3. Take VM snapshot
4. Apply the Exchange Server service Pack / Cumulative Update or Windows Update
5. Reboot
6. Reconnect the vNIC, if the server back online again with no issue, commit / delete the snapshot, if not, then disconnect the vNIC followed by roll back.
would that be make sense or supported from both Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?
If yu have any other suggestion, please let me know here.
Thanks in advance.

Hey AlbertWT,
I'll start off by saying that I wouldn't do it. Microsoft is explicit that snapshots are not supported with Exchange when virtualized. See below (from Exchange 2013 virtualization: Exchange 2013 Help):
Some hypervisors include features for taking snapshots of virtual machines. Virtual machine snapshots capture the state of a virtual machine while it's running. This feature enables you to take multiple snapshots of a virtual machine and then revert the virtual machine to any of the previous states by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that maintains state data, such as Exchange. As a result, making virtual machine snapshots of an Exchange guest virtual machine isn't supported.
Even if we ignore the support statement on snapshots this is still not a good idea. Here are some things to consider.
1) Cumulative updates for Exchange make changes to the Active Directory Schema. Rolling back the snapshot on the Mailbox server will not roll back the changes to AD, which could cause functional and supportability issues. See this link to give you an idea of how there are AD schema updates in every Exchange CU and service pack: Exchange 2013 Active Directory schema changes: Exchange 2013 Help
2) It is possible for email to come in during the time that you're testing the update, and if you need to roll back you would need a plan to get that email back. Third party services could work, or you could prevent email from coming into your environment completely during that time, but those are not ideal solutions.
A far better solution would be to create a lab environment that is isolated from production. You could either take clones of your Exchange and AD VMs and put them into a network fenced environment, or create a lab and import your AD structure so it matches production. I think this is a far better way to test than trying to rely on snapshots in production.
Hope that helps!
Matt

More then one E-mail address per insurance provider

Hello to you all,
Does anyone have an Idea on how can I maintain more then one E-mail address per insurance provider?
In Tcode NG07/8/9 I am able to have only one which is not enough,
I would expect to have a multiple selection on that field like in customer master record Tcode FD01/2/3.
Regards,
Yoav

Dear Yoav,
In the Tcode NG07 only one mail id is given because from here you can send the files directly on clicking the mail icon. Because when you click on mail icon(adjacent to box) it shows whom you are sending the data, here you can also mark CC & BCC to the different users.
In Customer you are not mailing directly. If you have any query you can reply back.
Regards
Piyush

Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed

Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?

Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS

Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.

PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards Bernhard

IPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan

Installing multiple copies of the SAME service on a BOX

This is a "Best Practice" question for BOE-XI (3.x).
I have dug through the 3.1 DEPLOYMENT training, Admin and Pattern documents, but none of them clearly discuss anything around installing multiple copies of the SAME service (eg. CMS, ReportJob) on the same physical server if it has more that 1 CPU.
The documents detail the "per CPU" limits of a service, but don't detail if we should install multiple services to take advantage of the multiple CPUs available on a specific Physical Server.
For example - the Crystal Report Job Server can support five (5) simultaneous report jobs per CPU by default.
If we have a 2 CPU machine, do we run one (1) CRJS service - but increase the "Maximum Jobs Allowed" setting to Ten (10), or do we install two (2) CRJS services each with a default limit of Five (5)...?
Does this rule apply to all services including the One (1) CPU for One-Hundred (100) simultaneous requests sizing-limit on the CMS..? That doesn't appear to be a setting we can control within the CMC.
Can you run more than one CMS service on a specific Physical Server...?
Thanks in advance for the advice.

I personally have run 20 jobs per Crystal Job server and most were dual processor dual core. I had over 1000 jobs a night, but not all at 1am...although most were within 2 hours of the same time.
I was able to get through them. However, I had 4 Crystal Job servers. Its all about your hardware being taxed.
I broke off my CMS away from the processing tier. So I could have multiple Crystal Job servers.
We had 3 processing tier servers all doing Crystal Jobs and Webi jobs. I had 60 running at one time for Crystal. 20 per job server.
i could have added the Crystal job servers to the same server, but the hardware was getting busy.
I would have at least 2 CMS's as they support 500 concurrent users (Sessions?) each.
This helped us - and we had over 8k reports in our repository. We were getting bound by memory constraints.
Once you get to 64 bit OS and App, (BO XI 4.0 sometime in 2010) it will help with this problem.
The only other way in the 32 bit environment is to add servers, even VM's if you have to as long as they are different hosts, but that adds expensive BOE CPU licenses - the big caveat to that.
That's how we solved the problem...

Exchange information store service is not starting on exchange 2010

i've run the updates on the exchange 2010 and restart the servers, after one week i've restart the 2003 dc and exchange 2010. now exchange information store service is not starting on exchange 2010 and the database are dismounted
help pls

I have just installed Exchange 2010 on my system and when trying to mount the database it fails. The Information Store service will not start on my server. Time is in sync with the DC and the initial install went fine. I have the following
from event viewer:
Cmdlet failed. Cmdlet Mount-Database, parameters {Identity=dellstslab}.
details
System
Provider
Name]
MSExchange
CmdletLogs
EventID
6
Qualifiers]
49152
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-02-18T16:43:34.000000000Z
EventRecordID
107
Channel
MSExchange
Management
Computer
Exchange2010.dellstslab.com
Security
EventData
Mount-Database
{Identity=dellstslab}
dellstslab.com/Users/Administrator
S-1-5-21-2431095704-2869583948-1116897492-500
S-1-5-21-2431095704-2869583948-1116897492-500
ServerRemoteHost-EMC
1412
14
00:00:01.1388073
View Entire Forest:
'True', Configuration Domain Controller: 'WIN-NVOVSE1R716.dellstslab.com',
Preferred Global Catalog: 'WIN-NVOVSE1R716.dellstslab.com', Preferred Domain
Controllers: '{ WIN-NVOVSE1R716.dellstslab.com }'
System.InvalidOperationException:
Couldn't mount the database that you specified. Specified database: dellstslab;
Error code: An Active Manager operation failed with a transient error. Please
retry the operation. Error: Database action failed with transient error. Error:
A transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 [Database:
dellstslab, Server: EXCHANGE2010.dellstslab.com]. --->
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException: An Active
Manager operation failed with a transient error. Please retry the operation.
Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable
to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException:
An Active Manager operation failed with a transient error. Please retry the
operation. Error: Database action failed with transient error. Error: A
transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
The system attendant service does not start either. Any ideas?

Update Rollup 7 for Exchange Server 2010 Service Pack 3 (KB2961522)

This rollups will not install and has caused multiple issues on the Windows SBS 2011.
The issues are as follows:
All Exchange and related services were stopped and had to be manually restarted.
The update fails for multiple reasons, changes every time.
I am no longer able to perform ANY updates without some sort of error code.
All Domain client computers now report Security Status as Critical, Servers as not available.
DNS does not appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
Running BPA shows no major issues
I can no longer run the WSUS server cleanup. I get a Connection Error and have to reset the node, but it soon fails again.
Shared folders may take quite a bit of time to open.
Any help would be greatly appreciated. I do have an open ticket with Microsoft and although this is rated critical I am not getting any resolution. The only thing that MS support managed to do was bring the server down for an additional day and corrupt my
EDB files so that they had to be rebuilt.

Hi,
à
All Exchange and related services were stopped and had to be manually restarted.
While the update was installed, it will automatically stop Exchange and IIS services. You may need to restart
manually.
àThe update fails
for multiple reasons, changes every time.
à
I am no longer able to perform ANY updates without some sort of error code.
Would you please let me know any of those
update-failed reasons? Meanwhile, please let me know some error code that you can get when can’t perform updates. Meanwhile, please refer to installation suggestions and tips in following article when install this update rollup.
Exchange
2010 SP3 Update Rollup 7 released and installation tips
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
àAll Domain client
computers now report Security Status as Critical, Servers as not available.
àDNS does not
appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
Please check if ping the SBS server successfully from the problematic client computer via server name and ip
address. In the SBS 2011, can you access
internet successfully? In addition, please select a client computer as a test machine, re-join it to the SBS network, then check if Security Status still report as Critical. Please also run Fix my network wizard in SBS console. Any find?
Meanwhile, please refer to following article and check if can help you to
repair Windows Server Update Services.
Repair Windows Server Update Services
By the way, did you have a good backup for the server?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

IS-U-IDE Multiple Datex Exchange Format per Service Provider

Similar Messages

Maybe you are looking for