ISE on Integrated Management controller - setup

Hi all,
I just got my 2 x 3415 controllers. It's running the Integrated Management controller - when connecting via the KVM console i get a login screen
ise-server-1 login:
Now form what I saw it does not have a default password - that's done while in setup mode. I took the servers out of the box directly from Cisco.
Does anyone know the password recovery / or have any suggestions on how to get past that - or force it to run the setup for ise on the
Integrated Management controller?

Document did help, however - something else. When they explain how to do a iso -> usb. Mine kept on failing.
First tried the Linux version - then windown.
Finnaly I just coppied the file to a usb and did a vmount via my laptop - and installed ise that way.
Now time for the configuration. -

Similar Messages

Cisco Integrated Management Controller Unexpected Error

I m getting unexpected error from my Cisco Integrated Management Controller when i login.
I cannot see the server properties and Cisco Integrated Management Controller (CIMC) Information.
the fields are blank.
Only the server status can been seen.
All the status are showing Good.
What should I do ?
There is no error on the Fault Summary.

The CIMC is an on-board management unit for the Cisco UCS C-series Rack-mount servers that provides out-of-band management capabilities. There is no additional cost to use the CIMC. However, you might consider other management options if you prefer a single management system rather than managing each server via CIMC separately. The Cisco UCS C-Series Management Options Video Data Sheet (http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/cis-102143.html) has some useful information on the management options for the Cisco UCS C-series Rack-mount servers.

3750 Integrated WirelessLAN Controller: Operational Status:resetting

Hi there!
A customer has a WS-C3750G-24WS-S50 WLC-Controller with exactly 50 APs. But those 50 Accesspoints are never completely registered to the WLC. Mostly there are 48-49 accesspoints registered but never 50.
The WLC is losing them randomly. It is never losing the same Ap. When looking via GUI it says "All APs 50" , "Total 49".
First of all I thought that I have the following problem:
The 4402-50 controller supports a maximum of 50 access points and has two ports. To support the maximum number of access points, you would need to create two AP-manager interfaces (see Figure 3-15) because a 4400 series controller can support only 48 access points on one port.
But this is not for the 3750 Integrated WirelessLAN Controller, because you have LAG enabled by default and you cannot change this. Therfore you are not able to create a second AP-Manager interface.
So let´s forget about this.
Then I tried some things on CLI an I noticed the following:
sw-mr-01-01#sh platform wireless-controller 6
Wireless Controller in Switch 6
Operational Status of the Controller : resetting
Service VLAN                         : 4095
Service Port Mac Address             : 0025.8420.8e8f
Service IP Address                   : 127.0.1.6
Management IP Address                : 192.168.150.220
Management VLAN                      : 0
Software Version                     : 5.2.193.0
Keepalive Version(controller/switch) : 1/1
Keepalives Missed                    : 16
Controller accepts http/https        : 0/1
Controller's Status Line             : up
Watchdog resets of Controller        : 1
Controller resets total              : 0
Unacknowledged control messages      : 27
I guess it is not normal that the status is "resetting" although the WLC is running. I can work on GUI and CLI, so it is not really "resetting"
According to the Config Guide status should be "operational".
Is this maybe my problem? The customer is not able to do a good WIPT because the WLC is maybe resetting somehow internaly or something like this.
In traps I got every minute "Lost heartbeat with supervisor" which normaly should be solved in earlier releases. I have 6.0.199.4
HELP!!!
Thanks in advance.

Ok.
1) Assing an IP address for a subnet you are sure you don´t use. for example 192.168.200.5 /24; GW 192.168.200.1 (via WLC GUI).
2) I suppose (because I have not configured any 3750 WLC) that the service port uses the vlan ID 4095 (This is I saw in any capture). then you have to create a int vlan 4095 in the Switch and assing the GW ip address of your WLC service-port.
3) Ping to verify conectivity between devices.
I´m suppose you have the service port via DHCP (it could be the reason you have an IP 0.0.0.0), this is not a best practice; Cisco recommends that assing an IP to this interface and never let to DHCP, specially if you don´t have any dhcp server in this VLAN.
Good Luck and sorry for my english.
Best Regards.

Acrobat does not load "Edit\Preferences\Color Management\Color Setup" properly.

When you convert a CMYK document with DeviceCMYK color space to profile, Acrobat X/XI Pro does not take the Working Space selected in "Edit\Preferences\Color Management\Color Setup" as the source space of DeviceCMYK object properly. But, after you change the "Settings" to any other setting (Like Jappan General Purpose 2) and confirm, and then change back to your wanted setting, thus, Acrobat will take the Working Space to convert color correctly. I tryed this many times, it reapears every time. It looks like that Acrobat does not load the "Color Setup" properly. Is there any one knows the reason of the problem? Is this a bug of Acrobat?

Could this only be a problem with clean installs of CS3?

Document Management Node Setup

Should Document Management Node setup be available in 11.5.7 as shown in the Workflow User Guide (pg. 2-31 to 2-33, 4-5 to 4-6, 10-32 to 10-35)? The example in the manual is too generic for my DBA's or Internet people to understand it fully.
If we are using embedded 11i workflows can we attach WORD documents or Excel spreadsheets to workflow notifications in an HP UNIX environment or do we have to be using a formal document image management system?
How do we specifically complete the Document Management Nodes screen for a Document Management system's images?
How do we specifically complete the Document Management Nodes screen for a document created by a PL/SQL procedure?
If we can attach Microsoft office documents to notifications, how do we complete the Document Management Node screen?
We are not using e-mail notifications or e-mail summaries. Users are accessing notification screens only.
Dave Petrie
Valspar Corporation

David,
The Document Management node setup is reserved for future use.
It is possible to integrate Workflow with Oracle Internet File System and more information can be found at:
http://otn.oracle.com/products/ifs/htdocs/workflow/workflow.html

Unable to see Desktop Integration Manager Responsibility in 12.0.6

Hello All,
I cannot see the BNE Destop integration Manager Responsibility in Oracle EBD Suite 12.0.6
Please help me, how to add this responsibility in R12.0.6.
Thanks
Regards
Sagb

Hi;
Please check below which could be helpful on your issue:
How To Access Define Parameter Using Desktop Integration Manager [ID 1325820.1]
NOTE:1363280.1 - GL Budget and GL Journal and FA Addition Integrators Error in Desktop Integration Manager
Regard
Helios

HT3964 Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs,

Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs, can I download it from Apple?

To get replacement installation disks, call Apple. Have the serial number of your MBP ready and a credit card. There is a fee.
Ciao.

Data Integrity Manager & Synchronize Objects

Hi there,
I have 2 questions regading data integrity and synchronization. If any of you can help me out, I would really appreciate it.
1) Synchronize Objects (R3AS4): Is this only used to sync the customizing objects or can it be used to sync master data objects as well? When I run this transaction, I get the message tat "Synchronization Ware not activated". Do any of you know how to activate this?
2) Data Integrity Manager: How do I choose betweeen a header level comparison and detail comparison. When I try to run it , nothing seems to happen, and I just get the message "0 objects are equal" and "0 objects are not equal" when I run it. I am just using the DIMA wizard to start the comparison. Do any of you have the "Data Integrity Manager Cookbook"? If so, can you please send ot to me?
Thanks in advance
Max

Hello Max,
Here are the steps that I just did in my system:
- transaction SDIMA
- New DIMa Instance wizard
- name = customer / object = customer
- RFC destination = <R/3> / filter mode = All filter / flag to start compare on wizard completion
- no filter settings
- complete
So the compare start as soon as the wizard is finished.
You can see the status of the job in the right of the screen. (it takes some time for BP). When the status is green, the job is finished.
Maybe you will have the message "0 objects are equal, 0 objects are not equal" but you should also have just above a message like "421 object(s) exist in both systems".
I don't think that the fact that you are not sending BP back to R/3 is a problem to use DIMA.
Hope this will help you.
Regards,
Frédéric

Creating LOVs with "Desktop Integration Manager" in EBS 12.1.x

After some struggling getting the "Desktop Integration Manager" to work (due to some obscure hard-coded security checks) I was able to create an Upload Integrator. The next step is now to add some LOVs on the upload spreadsheet.
I managed to create a Gender Popup LOV using a table (e.g. FND_LOOKUP_VALUES). Here is how to do that:
Desktop Integration Manager => Manage Components
Navigate to your attribute (your interface column) and click Update. Enter the following:
Val Type      = Table
Id          = LOOKUP_CODE
Meaning     = MEANING
Desc          = DESCRIPTION
Val. Entity     = FND_LOOKUP_VALUES
Where clause     = lookup_type = 'IGW_SUBJECT_TYPE' and enabled_flag = 'Y' and meaning <> 'Unknown or not reported' and sysdate between start_date_active and nvl(end_date_active, hr_general.end_of_time)
Lov Type      = Pop List
Type your custom Header in the ‘Prompt above’ field if required.
So far so good. However, I am not able to create a simple date picker or a Java validation. Somehow you need to create (or choose) a ‘Component’ with the ‘Manage Components’ function. But exactly how do you set the Component & Attribute up to make this work? For the date picker I chose:
Validation Type = Java
Component Name = Date Picker for From Date
LOV Type = Blank
I get a Popup Date Picker in my sheet now, however when I select a date is does not return it to the spreadsheet.
Can someone provide some screenshots how to create a date picker and/or a Java validation using seeded or custom Components?
I have read the documentation in the Desktop Integration Framework Developer's Guide Release 12.1 (December 2009) but that didn’t get me much further as there are no examples at all.
Thx
Jeroen

Hi, with 'hard coded security check' I meant that some parts of the "Desktop Integration Manager" only work if you have responsibility "Application Developer" attached to your User.
You can change a 'seeded' integrator with:
update BNE_INTEGRATORS_B
set
created_by = <your user id>
,last_updated_by = <your user id>
,display_flag = 'Y'
,source = 'C'
where integrator_code = <your code>
;

No hosts found in SMD Managed Sytem Setup Wizard

Dear Experts,
I connected a Portal system to SMD server. I manaualy defined the system in SMSY instead of SLD.
When I went to the SMD Managed System Setup Wizard, it reported"No instances or
servers are defined for this system. Please check its definition in SMSY before proceeding to setup".
I've carefully checked all system definition in SMSY. I wonder if others have come across the similiar
problem, sincerely hoping for your advice.
Best Regards,
Karl

Hi, David,
I just can't find my installed agents in SLD view. But under Agent administration Agent Tab I can see them with status green. I installed agent without registration to SLD, but user directly P4 connection.
I tried go SMD view, I can see my agents there , and it has a column SLD settings, push SLD settings,
I clicked to push SLD settings, but an error occured:(Failed to send SLD settings to remote agent: sapeppap01 (detail: Failed to save new SLD settings; nested exception is: java.lang.StringIndexOutOfBoundsException: String index out of range: -1).
Best Regards,
Karl

Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

Manage integrators with "Desktop Integration Manager"

Hi,
I am trying to get to the Desktop Integration Manager menu as described in the Desktop Integration Framework Developer's Guide Release 12.1 (on page 17 / 2-1):
To manage integrators:
1. Navigate to the Integrators page from the Oracle E-Business Suite Navigator by
choosing either Desktop Integration Manager: Manage Integrators or a custom
responsibility and menu path specified by your system administrator.
However "Desktop Integration Manager" is not a responsibility I can find in our 12.1.2 environment.
Does anyone has a clue where to find it?
thx
Jeroen

Hi,
Please make sure you have (Patch 9055234 - DIF: NEW RESPONSIBILITY AND FUNCTION FOR DESKTOP INTEGRATION MANAGER) applied.
Please see these docs for details (search for the patch number).
List of Patches in Web Applications Desktop Integrator (Web ADI) for Releases 11i and 12 [ID 726989.1]
Oracle Web Applications Desktop Integrator Release Notes, Release 12.1.2 [ID 950876.1]
Thanks,
Hussein

App Controller Setup crashes

While running the setup.exe as admin for the mu_system_center_2012_app_controller_with_sp1_x64_dvd_1345042.iso the App Controller Setup crashes with "System Center Setup has stopped working" "A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.". This happens during the Prerequisites step.
I have restarted the laptop several times and the OS is up to date. Is there a log that I can check for more detailed errors? What should my next step to troubleshoot?
Environment
SQL Server 2008 r2 and SQL Server 2012
Office 2013
Window 8 Pro 64 bit
Intel i7-3720QM @ 2.6
32 GB Ram
72 GB free on primary drive

If there is a problem with Setup completing
successfully, consult the log files that are located in the
%LOCALAPPDATA%\AppController\Logs folder
If setup complted with some error. please check it under: C:\ProgramData\AppControllerLogs
Aditionally, what is your OS family. Is it a Windows Server 2012 or Win8 Client? AppController can only be installed on the Server build such as:
Windows Server 2008 R2 (full installation) or Windows Server 2012.
For installing steps or system repquirement detail please refer to:
http://technet.microsoft.com/en-us/library/gg696046.aspx

SMD - MANAGED SYSTEM SETUP WIZARD.

Hi,
I'm on Solman SPS 15, trying to setup EWA for portals.
Ran the managed system setup, got the error.
Step DataCollect Details
Initial Data Collect ERROR for host XXXXXXX
!! Exception : Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
at com.sap.sup.admin.scheduler.task.remote.AbstractGatherRemoteTask.checkTaskResult(AbstractGatherRemoteTask.java:42)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.parseXml(InitialConfigGatherTask.java:107)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.process(InitialConfigGatherTask.java:68)
at com.sap.sup.admin.scheduler.config.DataCollect.execute(DataCollect.java:138)
at com.sap.sup.admin.setup.AppCfgTasks.runInitialDataCollect(AppCfgTasks.java:57)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:305)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:263)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:655)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:28)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:903)
at java.lang.Thread.run(Thread.java:534).
Plz advise.
Thx in advance.

#1.#00144F17012A00C700000018000066BD0004506CFD4B5C16#1214328943107#/Applications/AdminConsole/ConfigurationChangeReportingUpload#sap.com/tcwddispwda#com.sap.sup.admin.upload.configreport.xml.ConfigurationChangeHandler#J2EE_ADMIN#16932##XXXXX_SID_28888050#J2EE_ADMIN#0964c860421111dd94ec00144f17012a#Thread[Thread-83,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/Applications/AdminConsole/ConfigurationChangeReportingUpload#Plain###[7498] storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1214257551084558, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 13:35:42 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true].
I found this in application log
Edited by: Kobby bryant on Jun 24, 2008 7:39 PM

NVIDIA nForce System Management Controller: Windows 7 driver?

I have a Fujitsu Siemens PC, Amilo Desktop Pi 3630 A, running Windows Vista Home Premium 32bit,
which I would like to update (preferably without reinstall) to Windows 7.
When I checked Fujitsu's website and also by mail contact, I only got the response
"Your system is not certified for Windows 7"!
So I ran "Microsoft Windows 7 Upgrade Advisor", which said that I can upgrade!
The only issue is that it requires an update to the driver for the
"NVIDIA nForce System Management Controller" [current version is 5.1.2600.158],
but Microsoft directs me to THIS site.
Here I search for a suitable driver for my motherboard, which according the tech spec's is
MB MS-7504PV (or MS-7504VP-PV) with chipset NVIDIA nForce 630i,
but no luck there. The MSI Live Update Online plug-in does not find anything on my Mainboard.
Over at NVIDIA's site I can find a driver for nForce 630i but only paired with GeForce 7xxx,
and I don't think I need a complete motherboard driver package.
Where can I find the correct driver?
Or do I dare try a Windows 7 update anyway?
What can go wrong?
PC: Fujitsu Siemens Amilo Desktop Pi 3630 A
CPU: Intel Core 2 Quad Q8200 2.33GHz
M-board: Fujitsu Siemens / MSI MB MS-7504PV, muATX, v1.1, Socket 775
Chipset: NVIDIA nForce 630i MCP73PV
BIOS: AMI v3.0S
Video: NVIDIA GeForce 9600 GT
LAN: nForce Realtek RTL8211
OS: Windows Vista Home Premium 32bit

You do not have an MSI Retail Product but a mainboard produced exclusively for the OEM Market. Neither MSI nor this forum provides end-user support for OEM products. That is also why MSI Live Update does not find anything for this particular platform (OEM). You need to contact Fujitsu Siemens for assistance (and this include BIOS Updates and drivers).
__TOPIC LOCKED__

ISE on Integrated Management controller - setup

Similar Messages

Maybe you are looking for