ISE problem with BYOD smart solution...

Hi
I did all configurations in the byod smart solution.
and I was curious.....how they idenfity OS of devices...
I wanted to use 'Session:Devices-OS' ... but it seems not to work..
Also,
I want to profile self-registered devices. so if someones register their iPad2 or iPhone,
I want them to profiled in Mobile under the RegisteredDevices ( I was able to create a group called Mobile under the RegisteredDevices).
and I want to use this identity group when I create authorization rules.
is there any way to do it??
Hope this is clear enough to be understood.
thank you.
Best regards.
Justin

Hi,
The following thread covers the answer you are after.
https://supportforums.cisco.com/message/3744919#3744919
Basically the device-os attribute is satisfied through posturing or using nmap. Not through http/dns/dhcp profiling.
thanks,
Tarik Admani
*Please rate helpful posts*

Similar Messages

Problem with Picsel Smart Office Palm Pre 2

I bought SmartOffice last weekend, but when I launch this app, the app tells me the licence is not verified in a red screen of death.
I have an unlocked EU Palm Pre2, I use it in Spain. The device is activated with Movistar, but now it is use it with Simyo.
I am extremely disappointed. I wish a solution or a refund. I have problems with NDrive and PDK GPS bug also, and after some months there is not a solution
I cannot waste my money in apps that are not working.
Post relates to: Pre p100ueu (Movistar)

Well,
I've solved my problem.
I changed my Sim card with one of the carrier my Pre 2 was activated. Rebooted the Pre2 and then Smart Office was working.
I replaced again, then sim card with my carrier one, and it worked again.
This is a stupid thing, it seems that licenses are checked against carriers, but people change their carriers phone.

Problem with conexant smart audio hd

I bought toshiba satellite L750 with conexant smart audio hd sound card... when i connect it to my stereo, it's not the same sound as on other laptop with realtek sound card, it's very low. My phone with 3.5 mm jack gives better sound... is it hardware or software problem... pls help, tnx.

SATELLITE L750-124 specifications
SATELLITE L750-124 drivers
Abysmal your model appears to be from Europe, perhaps Hungry?
I don't have a Conexant sound card, I have a Realtek, so I can't test anything.There doesn't appear to be much in the way of help or advice on this issue on our forum. Perhaps you'll have better luck on the Toshiba Europe Forums.
But, if you find a solution, we'd appreciate you posting it back here.
Good luck!
Mike

Strange Problem with Forms (Smart Forms)

I have lately been experiencing a strange problem with standard forms in the system. We have WebAS640 / ECC5.0 System. Soon after the initial run of patches, most forms in the system are showing the character '#' in place of formatted texts.
I have searched the internet and most forums, but have not found a solution. Since this is the standard forms that i am talking about (unmodified and untouched) so i assumed this had something to do with our patch levels. However that is only an assumption.
In particular i am having problem with the billing invoice type RD00, form name: LB_BIL_INVOICE. I have traced the problem to this much. The form shows the expected text, where no character format is applied to it. And where ever there is some character format, it just shows a string of hashes ('#'). The style being used by this form is LO_STYLE.
I am also listing my patch levels in case that helps.
SAP_BASIS     640             0014
SAP_ABA             640             0014
ST-PI             003C_640     0001
PI_BASIS     2004_1_640     0006
SAP_BW             350             0012
SAP_HR             500             0005
SAP_APPL     500             0006
PI             2004_1_500     0004
EA-IPPE             300             0004
EA-RETAIL     500             0005
EA-PS             500          0005
EA-HR             500          0005
EA-GLTRADE     500          0005
EA-FINSERV     500          0005
EA-DFPS      500          0005
EA-APPL      500           0005
Hope somebody can help in regard

Hi Ashan!
Interesting problem. You are seeing replacement characters, because assigned font(size) is not installed (somewhere, SAP or printer).
But since this is completely standard, open an OSS-request - maybe it's not as fast as SDN, but I'm sure you will get a qualified answer (and solution).
Regards,
Christian

Yosemite Mail still has sync problems with Gmail - any solutions?

I notice that Yosemite Mail still has sync problems with Gmail. After running for some hours, I noticed there were 6 emails in my Gmail account that had not synced over the past hour.
In the meanwhile, for safety's sake (don't want to miss emails!) I'm back to Mailplane. But I wonder if anybody knows of a solution to this long term problem first introduced in Mavericks. Works fine in iOS Mail though.
Thanks,
doug

I don't think we'll ever have a "best of both worlds" Doug. I've used Gmail since the week it launched the first beta in 2004, and it's always been a bit of a love-hate relationship for me (mostly love). With the demise of the Google Notifier for Mac, I went with Mailplane, but even it has problems. Like when I see my iPhone update with new mail and I'm looking at Mailplane and it won't update at times with even a forced refresh. I often have to close/reopen it to see new messages. But, it's hard to live without my Google Calendar only a tab click away, one of the primary reasons I use Mailplane, that plus changing view zoom sticks with Mailplane and won't with Gmail.
For years I've thought Gmail labels were the perfect filing solution, but over the past few weeks I've been analyzing just how much I really use that feature, and for me...it's not all that much. I think I could simplify my life by putting everything into appropriate folders (as in all other email apps). Apple doesn't realize just how much money they're losing by not allowing people to use private domains with iCloud mail...which I would do in a heartbeat just because it would work perfectly with Mail.app. I would pay even more than I currently pay Google for this solution with Google Apps Business. So, I'm actually on the verge of moving my private domain to the best email service I can find and then using it with Mail.app. The problem here, of course, is I'll lose the best spam control on the planet (Gmail). So, as you say, there simply is not a "best" solution for all these things. I'll at least try a new email service first with some other domain to see how I like it before moving my primary email.
Lastly, the other thing that incenses me is synching of flags between iOS and Apple Mail. It works fine between Gmail and iOS Mail, since all I care about is whether a message is starred/flagged or not. But using Apple Mail, when I flag a message it will not show as flagged in their own iOS Mail, which is incomprehensible, given they built both apps.
If you find a great solution or discover anything new...please post it here, Doug. Thanks.

Problems with remote app solution suggestion!

Hello,
I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.

Welcome to the Apple Community Johnson4o.
That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so.

Problem with sle4428 smart card ... PLZ help me!

hi everyone
I must use sle4428 .but I have problem with reading and writing on it!
when i send my write ADPU command to card it response with 90 00 which means that it write on the card correctly(at least that's what i think it should mean!)
but when i send my read ADPU command it doesn't read the right thing although it response with 90 00 !
these are my write and read commands:
---------------------------------- Connect ----------------------------------
con
Connect (OK) : Command executed correctly
---------------------------------- Get ART----------------------------------
pon
Power On (OK) : Command executed correctly
DATA = 3B00
---------------------------------- Write Command----------------------------------
apdu ffd1001b01cc
APDU (OK) : Command executed correctly
SW1 SW2 : 90 00
---------------------------------- Read Command----------------------------------
apdu ffb2001b01
APDU (OK) : Command executed correctly
DATA
0000 FF
SW1 SW2 : 90 00
as you can see I write cc in that spesefic address but when i read that address the card returned FF. (It always returns this value.)
I'll appreciate any help

hi shili
you must verify pin, and then write to card.
use this command for verifying pin[present_code_memory_card]:
FF 20 00 00 02 FFFF
FFFF is default pin.
if correct code has been presented to to the card,
in response message error counter is FF [ first bytes of response].
use this command for writing 5152 to address 00aa:
FF D0 00 AA 02 5152
read command :
FF B2 00 AA
in each command, set Le to appropriate value.
best regards,
siavash

Problems with BYOD onboarding with ISE 1.3 Internal CA

This implementation is leveraging the ISE 1.3 internal CA to enroll certs to authenticated BYOD users. The authentication/authorization profiles and policies are configured for wireless supplicant provisioning for AD authenticated IOS and Android devices.
•             When the test BYOD user with AD credentials tries to log in, they get redirected to the ISE BYOD provisioning portal.
•             They get to step 3 and successfully install the ISE certificate.
•             They then get a prompt to install the profile service (enroll an identity cert and load the wireless profile). This attempts to install for about 30 seconds and then fails with a message – ‘Profile installation Failed’ The request timed out.
The only thing I noticed that may possibly be an issue is that they are using a wild card cert signed by digicert for the ISE identity cert. Or maybe something else needs to allowed in the provisioning ACL?
I appreciate any assistance on this.

A few questions here:
1. Is this for wired or wireless BYOD
2. What version of ISE and Controller / Switch are you running
3. Post a screen shot of the Client Provisioning ACL
4. Post a screenshot of your AAA policies in ISE
The wildcard cert should not be OK as that will only be used for the HTTPs portion of the request while the EAP session would be based on the ISE CA cert.
Thank you for rating helpful posts!

ISE problem with EAP-TLS Supplicant Provisioning

Hi All,
I have a demo built using ISE v1.1.3 patch 1 and a WLC using v7.4.100.0 software. The aim of the demo is to provision a device's supplicant with an EAP-TLS Certificate... 'device on-boarding'
The entire CWA / Device Registration process is all fine and works well. I'm using a publically signed Cert on ISE that is built from [Root CA + Intermediate CA + Host Cert] which is used for both HTTPS and EAP and I also have SCEP operating against my Win 2k8 Enterprise Edition CA that is part of my Active Directory. All of this works fine.
The problem is that when ISE pushes the WLAN config down to the device, it instructs the Client to check for the Root CA, but the RADIUS processes within ISE are bound to the Intermediate CA. This leads to a problem where the Client doesn't trust the Certificate presented to it from ISE. There doesn't seem to be any way to configure this behaviour within ISE.
Has anybody else encountered this? Know a solution? Have suggestions for a workaround?
Cheers,
Richard
PS - Also using WinSPWizard 1.0.0.28

Hi Richard,
This is a misbehavior that ISE is provisioning the intermediate CA certificate during the BYOD registration process in similar (hierarchical certificate authority) scenarios. It is going to be fixed soon. Engineering is almost ready with the fix.
Istvan Segyik
Systems Engineer
Global Virtual Engineering
WW Partner Organization
Cisco Systems, Inc
Email: [email protected]
Work: +36 1 2254604
Monday - Friday, 8:30 am-17:30 pm - UTC+1 (CET)

A problem with Client Security Solution patch for Mozilla Firefox3

After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel. Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
I have never had an issue using the TV password manager and IE7. It is a very reliable combination.
I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2). I have never had Lenovo Password Manager on my T60. Everything works reliably well with this combination.
In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
1. Tools --> Add-Ons
2. Disable TV Password Manager, then restart FF3
3. Tools --> Add-Ons
4. Enable TV Password Manager, then restart FF3
5. TV Password Manager will work for the duration that I am using the browser session
Once I close FF3 and reopen it, TV Password Manager no longer works. The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session. It is very consistent. Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above. If this is due to a conflict with other software on my laptop, I have not been able to determine this.
In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success. I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success. I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail. Again FF 2.0.0.16 continues to work very well with little effort on my part. I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably. I have FF2 and IE7 working so I have plenty of good alternatives at this time. I will post this at the FF3 above as well to see if anyone has any feedback.
Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

Two problems with a grep solution?

Hello!
I have two problems that I need some help with. I've been searching around for solutions, but are unsure what approach that is the best:
A: I need a new (or next) paragraph style after TWO hard line breaks. How do I do this? Do i search for two line breaks in GREP and replace it with a "end of paragraph"? Or do I need scripting for it?
See the attached file for the actual layout solution. "1" is the current situation, and I want it to automaticly be "2".
B: We have just implemented a new text editor/system and it lacks a feature: In the body text there is no styling/labeling for "paragraph title". In other words, the paragraph titles show up in Indesign as plain body text.
This is a big source of error. So: Is there any way to search for sentences that lacks period (.) and change their styling? The paragraph titles are the onlye sentences without periods in the whole text.
I'll be VERY happy it someone can point me in the right direction, or provide a solution.
Regards,
Magnus

You are getting familiar with the lingo, Peter! You are correct: you can use a class in a negative lookbehind. This GREP
(?<![.,!])$
will find an end-of-paragraph where there is no period, comma, or exclamation before. But it has a few problems, though -- it doesn't "mark" anything as found, and InDesign does not like it. A solution is to find any character-which-is-not-punctuation:
[^.,!]$
If you are sure you want to skip all punctuation, you could try the built-in class name "punctuation":
[^[:punct:]]$
.. but I just saw a bit of an unexpected side effect: a hard return (which is "any code followed by the end of a paragraph", if one is applying the formula to the letter) also is "not punctuation" (again playing strictly by the rules). And you Can't Argue with the rules. So, alternative #1 would be to work around it with
[^[:punct:]\r]$
which is 'everything except punctuation OR a hard return'. Or let's forget all about that pesky punctuation-not-punctuation and search for a word character at the end of a paragraph:
\w$

Problem with a patch solution

Hi.
I have a problem. when made patch of the solution. I was to make change in a web service and save and active. When i tried make assemble and download customer/specific solution the changes not work because i don't see some fields I added in the web service. i don't know what's happened. I hope you can help me with this topic.
If you need more information or details about this issue please let me know.
Thanks for advance
Best Regards.

Hi Tim,
I checked the patch and it is enabled and the original solution is not enabled, the problem is i added some fields to a web service, but when i doing request to the web service. I don't see the new fields. This in the tenant that i generated the patch.
I don't know whats happen, I hope you can help me if you need more details, please let me know.
Thanks very much for you help.
Best Regards!

Problem with Spin Smart Build

Hi all, I am currently working on a year in review slide with 90 or so photos, I have an image as my Background and in the center of the slide I want to have the pictures spin in and out. It works except that I keep getting white boxes at random intervals where pictures do exist. All the pics are coming from my iPhoto libraries. Any advice?

I've run into the same problem on SOME transitions when exporting to FLASH (.swf) format.
In my case it ONLY happens if I have more than 12 photos in the smart build, and some transitions do NOT have the problem (FLIP and SPIN do NOT; push does - unfortunately)...
can anybody else confirm that the problem only happens with more than 12 photos???
also, the white 'boxes' in the center of the flash are the outlines of other photos... with 13 photos, the white box is of the 2nd pic in the build; with 14 photos, the 2nd and 3rd outlines show up; etc.

My iphoto library folder with files of my pictures is missing from the pictures folder, only the application icon remains. I have read through similar discussions but have not managed to fix the problem with the recommended solutions. Can anyone help?

I have a Macbook Pro with iphoto '08 running on Mac OS X version 10.5.8. I used to be able to go to my pictures folder on my HD and access my pictures via that iphoto library folder. There used to be a small arrow next to the iphoto icon with all the albums then listed within the folder (to the right). That arrow is now gone and all I have is the iphoto application icon which just reopens iphoto when I click on it, but I want to be able to access the data files. Somehow I do have files btwn 2008 and 2009 but it hasn't created these since then...Could someone please help me to restore this ability? I have read other similar posts but they seem to be related to lost data all together and I do luckily have all my pictures in iphoto still. I just can't access them in the pictures folder which means I can't access them on my external hard drive. I am now out of start up disc space somehow so I figured I had to delete some albums (I have 12,090 pictures) and do have them backed up but want to make sure I can go back for them when I need them. I did export all the pictures to a folder on the hard drive but it is all 12,090 in one long list with only numbers as names and not in any order, this will be a nightmare to access later! Please help! Thank you!

You can’t open your current photo library using this version of iPhoto.
That indicates that that is your library. Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library". It should look like this:
Now launch iPhoto with the Option key held down and select that library to open. If you get that same message close iPhoto and try the following;
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Problem with Aris and Solution Manager

Hi,
I'm trying to synchronize Aris and SAP Solution Manager.
I'm doing installation and configuration following Administration Guide
chap. 7 from Aris for Netweaver guide, but, I have a problem when I
try to transfer projects from Aris to SolMan.
In the main ARIS menu from ARIS Business Architecture for SAP NetWeaver>
Aris Network>LOCAL>Synchronization>Maingroup, a SAPLogon screen appears
to logon to SolMan system, ask for Client, User and PWD.
I put the same user/pwd that I use to logon to SolMan, but ARIS cannot
connect to, an error message appears "User or password incorrect".
Does anyone have idea about this problem??
Thanks

Mariana,
try changing your password to all CAPS in Solman.
regards,
Jason

ISE problem with BYOD smart solution...

Similar Messages

Maybe you are looking for