ISE1.1 Posture Compliance not working

Hi
I am facing problem with ISE Posture Compliant working...
-- ISE Authorization Policies are working ok , but when i am creating Posture Policy for Client machine which doesn't has AV installed at all . In this case still on report it says that Posture is compliance
-- ISE Authorization Policies are working ok , but when i am creating Posture Policy for Client machine which doesn't has AV defination is not update and condition is match with latest verion  In this case still on report it says that Posture is compliance ..
Can any one help me out
Authorization Policy
-Employee-PreCompliant  -- if  Session PostureStatus Equals NonComplaint then Permission Posture_Remmediation
Employee_Compliant  -- if  Session PostureStatus Equals Complaint then Permission Employee_Access

Grant,
It looks like you are changing the vlan after your client gets an ip address, it seems like the client gets an ip address of
192.168.16.164 and you are changing the vlan over to 516. I wanted to know if that is there isnt an ip to vlan mismatch before you move forward. If 516 is quarantine vlan you may want to start all clients on that vlan and use dynamic vlan assignment through change of authorization once a client becomes compliant. The reason is is that you can use the web portal, or the nac agent to change the ip address once the vlan is changed.
Thanks,
Tarik Admani

Similar Messages

  • ISE posture redirect not working

    ISE v1.1.0.665, 3395 h/w.
    Single Admin/Monitor/Policy node.
    WS-C3560-48TS      12.2(55)SE5           C3560-IPBASEK9-M
    For Client Provisioning I created an authorisation policy as follows:
    download acl "ACL-POSTURE-REMEDIATION"
    apply url redirect "ACL-POSTURE-REDIRECT".
    "Debug radius" shows all this is downloaded to the switch but:
    - Redirect does not work.
    - dACL is not applied if the URL redirect is also configured.
    Wireshark on the client shows no direct.
    Attached file shows "debug radius" for various combinations of authorisation policy i.e. dACL only, Redirect only, dACL + Redirect.
    I've also attached screen shots of these policies and wireshark.

    Grant,
    It looks like you are changing the vlan after your client gets an ip address, it seems like the client gets an ip address of
    192.168.16.164 and you are changing the vlan over to 516. I wanted to know if that is there isnt an ip to vlan mismatch before you move forward. If 516 is quarantine vlan you may want to start all clients on that vlan and use dynamic vlan assignment through change of authorization once a client becomes compliant. The reason is is that you can use the web portal, or the nac agent to change the ip address once the vlan is changed.
    Thanks,
    Tarik Admani

  • Posture Assesment/Remediation is not working in my ADSSO setup.

    Hello Guys,
    I set up my NAC L3 out of band and use for ADSSO. ADSSO authentication is working fine but when i apply the rules for Posture Assesment and remediation is not working. Folks, What seems to be the problem of this.
    Thank you and best regards,
    Edwin

    Hello Guys,
    I set up my NAC L3 out of band and use for ADSSO. ADSSO authentication is working fine but when i apply the rules for Posture Assesment and remediation is not working. Folks, What seems to be the problem of this.
    Thank you and best regards,
    Edwin

  • Php include not working

    Good Afternoon.
    I am having a hard time trying to find what needs to be set to allow url
    include statments in php on Netware 6.5 sp3, php5.
    I know my code is correct after trying it on an external server, and it
    seems all other php coding works. Just not the http includes as shown
    below:
    <?php
    include ('http://your.website.here/filenamehere.php');
    ?>
    php.ini is posted below:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably
    guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or
    M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an
    expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and
    parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the
    equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend
    extension),
    ; you may only use these constants *after* the line that loads the
    extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file.
    It
    ; sets some non standard settings, that make PHP more efficient, more
    secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes
    from
    ; the standard settings are thoroughly documented, you can go over each
    one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the
    php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it
    features
    ; different values for several directives, in order to improve
    performance, while
    ; possibly breaking compatibility with the standard out-of-the-box
    behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET,
    cookies,
    ; environment and other server variables). Instead of using $foo, you
    must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives
    through the
    ; request, namely, POST, GET and cookie variables), or use one of the
    specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
    depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned
    off by
    ; default) in the next version of PHP, because it often leads to
    security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for
    further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined
    array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the
    execution of
    ; scripts will no longer be displayed as a part of the script output,
    and thus,
    ; will no longer be exposed to remote users. With some errors, the
    error message
    ; content may expose information about your script, web server, or
    database
    ; server that may be exploitable for hacking. Production sites should
    have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur
    during the
    ; execution of your script will be logged (typically, to your server's
    error log,
    ; but can be configured in several ways). Along with setting
    display_errors to off,
    ; this setup gives you the ability to fully understand what may have
    gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically
    results in less
    ; writes, and sometimes less packets sent on the wire, which can often
    lead to
    ; better performance. The gain this directive actually yields greatly
    depends
    ; on which Web server you're working with, and what kind of scripts
    you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc
    global
    ; variables.
    ; - magic_quotes_gpc = off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent
    into
    ; SQL databases without further manipulation. Instead, you should use
    the
    ; function addslashes() on each input element you wish to send to a
    database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error
    messages
    ; are emitted for non-critical errors, but that could be a symptom of
    a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by
    reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are
    recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant
    browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the
    output
    ; buffering functions. You can also enable output buffering for all files
    by
    ; setting this directive to On. If you wish to limit the size of the
    buffer
    ; to a certain size - you can use a maximum number of bytes instead of
    'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using
    ob_start().
    ; Using this ini directive may cause problems unless you know what
    script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and
    "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling
    the
    ; PHP function flush() after each and every call to print() or echo() and
    each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = off
    ; The unserialize callback function will be called (with the undefined
    class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision
    significant
    ; digits after the floating point. The default value ensures that when
    floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by
    reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the
    function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each
    time
    ; you use this feature, and the argument will be passed by value instead
    of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir = "sys:/tmp"
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe
    Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables
    that
    ; the end user won't be able to change using putenv(). These variables
    will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change
    them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; By default this is also set to "sys:/tmp". This is actually the value
    that is
    ; set for the below mentioned "upload_tmp_dir" directive. If
    "upload_tmp_dir" is
    ; changed, change the same for "open_basedir" also. This is done to allow
    ; phpMyAdmin application users to execute SQL commands through an SQL file.
    open_basedir = ".;sys:/tmp"
    ; This directive allows you to disable certain functions for security
    reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security
    reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the
    server
    ; (e.g. by adding its signature to the Web server header). It is no
    security
    ; threat in any way, but it makes it possible to determine whether you use
    PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in
    seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing
    request data
    memory_limit = 64M ; Maximum amount of memory a script may consume
    (8MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often
    result
    ; from a bug in your code, but it's possible that it
    was
    ; intentional (e.g., using an uninitialized variable
    and
    ; relying on the fact it's automatically initialized
    to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best
    interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error
    logging
    ; instead (see below). Keeping display_errors enabled on a production web
    site
    ; may reveal security information to end users, such as file paths on your
    Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log
    (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the
    source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length
    at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on
    same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this
    setting
    ; is On you will not log errors with repeated messages from different
    files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that
    direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from
    http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used
    including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    error_log = "sys:/php5/error.log"
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST,
    Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right,
    newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You
    may
    ; want to turn this off if you don't want to clutter your scripts' global
    scope
    ; with user data. This makes most sense when coupled with track_vars - in
    which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily
    lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them
    off,
    ; for performance reasons.
    register_long_arrays = On
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables,
    you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from
    exec(), etc.
    magic_quotes_runtime = off
    ; Use Sybase-style magic quotes (escape ' with '' instead of ').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "path1;path2"
    ;include_path = ".;c:phpincludes"
    ; NetWare
    include_path = ".;sys:/php5/includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below.
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = sys:/php5/ext
    ; Whether or not to enable the dl() function. The dl() function does NOT
    work
    ; properly in multithreaded servers, such as IIS or Zeus, and is
    automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI
    under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache
    or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name
    that PHP
    ; will look for to know it is OK to continue execution. Setting this
    variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers
    to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status:
    header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if
    not
    ; specified).
    upload_tmp_dir = sys:/tmp
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 100M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory
    information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ;Windows Extensions
    ;Note that ODBC support is built in, so no dll is needed for it.
    ;extension=php_bz2.dll
    ;extension=php_cpdf.dll
    ;extension=php_curl.dll
    ;extension=php_dba.dll
    ;extension=php_dbase.dll
    ;extension=php_dbx.dll
    ;extension=php_exif.dll
    ;extension=php_fdf.dll
    ;extension=php_filepro.dll
    ;extension=php_gd2.dll
    ;extension=php_gettext.dll
    ;extension=php_ifx.dll
    ;extension=php_iisfunc.dll
    ;extension=php_imap.dll
    ;extension=php_interbase.dll
    ;extension=php_java.dll
    ;extension=php_ldap.dll
    ;extension=php_mbstring.dll
    ;extension=php_mcrypt.dll
    ;extension=php_mhash.dll
    ;extension=php_mime_magic.dll
    ;extension=php_ming.dll
    ;extension=php_mssql.dll
    ;extension=php_msql.dll
    ;extension=php_mysql.dll
    ;extension=php_oci8.dll
    ;extension=php_openssl.dll
    ;extension=php_oracle.dll
    ;extension=php_pdf.dll
    ;extension=php_pgsql.dll
    ;extension=php_shmop.dll
    ;extension=php_snmp.dll
    ;extension=php_sockets.dll
    ;extension=php_sybase_ct.dll
    ;extension=php_tidy.dll
    ;extension=php_w32api.dll
    ;extension=php_xmlrpc.dll
    ;extension=php_xsl.dll
    ;extension=php_yaz.dll
    ;extension=php_zip.dll
    ;NetWare Extensions
    extension=php_ldap.nlm
    extension=phpmysql.nlm
    extension=php2ucs.nlm
    extension=php_xml.nlm
    extension=php_ossl.nlm
    ; Module Settings ;
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling
    define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    ;SMTP =
    ;smtp_port = 25
    ; For Win32 only.
    ; sendmail_from =
    ; For Unix only. You may supply arguments as well (default: "sendmail -t
    -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra
    parameters
    ; to the sendmail binary. These parameters will always replace the value
    of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
    char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an
    explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will
    use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index
    scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect()
    will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysqli.default_password =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results
    according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of
    its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of
    its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help
    the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead
    of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that
    case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    session.save_path = sys:/php5/sessiondata
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other
    method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit
    register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 0
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one
    batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you
    want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [LDAP]
    ; Path to a directory which contains SSL certificates to be used for LDAP
    over SSL
    ; Terminate the path with /
    ldap.ssl_cert_dir = "sys:/php5/cert/"
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
    JIS.
    ; With mbstring support this will automatically be converted into the
    encoding
    ; given by corresponding encode setting. When empty
    mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola
    and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Local Variables:
    ; tab-width: 4
    ; End:
    [Imagemagick Extension - Added By GKO - 08.01.05]
    extension=php_imagick.nlm
    Thank you for any insight you can give ... I am not a php person.
    Tony

    Tony,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • [SOLVED] SQLite not working with PHP

    For reasons unknown, I cannot get PHP to work properly with SQLite. I have uncommented the "extension=sqlite.so" in /etc/php/php.ini, ensured that PHP's configuration was being loaded from said file, and made sure PHP was working fine with my server of choice (lighttpd). Unfortunately, it doesn't seem to work, as evidenced by
    Fatal error: Call to undefined function sqlite_open() in test.php on line x
    Which is what PHP spits at me. I've checked lighty's logs and nothing's wrong. PHP's set to send to syslog, so I'm not sure where I could check on that. Here is a quick look at PHP's setup.
    My /etc/php/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; database vendor specific escape string function on each input element you
    ; wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=#ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    default_charset = "utf-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    sqlite.assoc_case = 1
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mhash.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    I've attempted enabling pdo.so and pdo_sqlite.so as well, with no results, making sure to stop lighty and flush all of its processes before checking again.
    `php-cgi -m | grep sqlite` does not return anything, either.
    The extensions directory (/usr/lib/php/20060613) exists on my system and contains sqlite.so, as expected.
    I have no clue what's going on here and would greatly appreciate any help offered.
    Last edited by xelados (2009-09-23 04:02:22)

    After the last update which installed PHP 5.3.0, I'm having a similar problem. PHP fails to recognize any extensions which I've defined in php.ini. PHP itself works just fine, so I'm sure this problem is related to the update of PHP.
    Here's my php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = Off
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 120 ; Maximum execution time of each script, in seconds
    max_input_time = 120 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 128M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = Off
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 128M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/modules/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 128M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 10
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/www/sessions"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = ServerSessionIdentifier
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly = 1
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 30
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 3600
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = none
    ; Document expires after n minutes.
    session.cache_expire = 0
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 1
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 6
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ;url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    extension=mcrypt.so
    ;extension=mime_magic.so
    extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    extension=openssl.so
    extension=pdo.so
    extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    Some more info:
    [root@Taurine etc]# php-cgi -m
    [PHP Modules]
    cgi-fcgi
    Core
    ctype
    date
    dom
    ereg
    fileinfo
    filter
    gettext
    hash
    libxml
    mbstring
    mysql
    mysqlnd
    openssl
    pcre
    PDO
    pdo_mysql
    Reflection
    session
    SimpleXML
    sockets
    SPL
    standard
    tokenizer
    xml
    xmlreader
    xmlwriter
    zlib
    [Zend Modules]
    [root@Taurine etc]# php-cgi -v
    PHP 5.3.0 with Suhosin-Patch (cgi-fcgi) (built: Sep 16 2009 13:55:34)
    Copyright (c) 1997-2009 The PHP Group
    Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies
    [root@Taurine etc]# cd /usr/lib/php/modules/
    [root@Taurine modules]# ls -alh
    totalt 3,2M
    drwxr-xr-x 2 root root 4,0K 16 sep 13.57 .
    drwxr-xr-x 4 root root 4,0K 16 sep 13.57 ..
    -rwxr-xr-x 1 root root 27K 16 sep 13.57 bcmath.so
    -rwxr-xr-x 1 root root 21K 16 sep 13.57 bz2.so
    -rwxr-xr-x 1 root root 25K 16 sep 13.57 calendar.so
    -rwxr-xr-x 1 root root 51K 16 sep 13.57 dba.so
    -rwxr-xr-x 1 root root 52K 16 sep 13.57 exif.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 ftp.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 gettext.so
    -rwxr-xr-x 1 root root 37K 16 sep 13.57 iconv.so
    -rwxr-xr-x 1 root root 1,2M 16 sep 13.57 imap.so
    -rwxr-xr-x 1 root root 35K 16 sep 13.57 json.so
    -rwxr-xr-x 1 root root 43K 16 sep 13.57 mysql.so
    -rwxr-xr-x 1 root root 109K 16 sep 13.57 mysqli.so
    -rwxr-xr-x 1 root root 110K 16 sep 13.57 openssl.so
    -rwxr-xr-x 1 root root 98K 16 sep 13.57 pdo.so
    -rwxr-xr-x 1 root root 24K 16 sep 13.57 pdo_mysql.so
    -rwxr-xr-x 1 root root 286K 16 sep 13.57 phar.so
    -rwxr-xr-x 1 root root 26K 16 sep 13.57 posix.so
    -rwxr-xr-x 1 root root 9,8K 16 sep 13.57 shmop.so
    -rwxr-xr-x 1 root root 356K 16 sep 13.57 soap.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 sockets.so
    -rwxr-xr-x 1 root root 355K 16 sep 13.57 sqlite.so
    -rwxr-xr-x 1 root root 15K 16 sep 13.57 sysvmsg.so
    -rwxr-xr-x 1 root root 8,3K 16 sep 13.57 sysvsem.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 sysvshm.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 xmlrpc.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 zip.so
    Last edited by nullvoid (2009-09-22 17:39:47)

  • AIR-LAP1242G-E-K9 do not work with AIR-CT5508-K9 while AIR-LAP1142N-E-K9 do

    Hello,
    we do have a site where we need to deploy AIR-LAP1142N-E-K9 and AIR-LAP1242G-E-K9 APs. We have two AIR-CT5508-K9 controllers with SW version                  6.0.188.0.
    AIR-LAP1142N-E-K9s work okay, as expected, we do not have any problems with them.
    However AIR-LAP1242G-E-K9s do not, there is a problem with establishing CAPWAP tunnel with the controller.The AP is seen on the controller for a while, with 0 time up-time, cannot change any settings on the AP via controller, and after a while it disapears from the controller, apears again and this repeats.
    The APs and controllers are connected to the LAN campus.
    Controllers via two 1G links configured as Etherchannel to WS-C6506-E VSS switch with s72033-ipservicesk9_wan-vz.122-33.SXI1.bin on it.
    APs to WS-C3750G-48PS with c3750-ipbasek9-mz.122-50.SE2.bin on it. 3750 is connected to the C6505 via two 1G links configured as Etherchannel.
    Below I copied the log I captured on 1242 and the controller. Highlighted ones are the ones which I think might bring a clue.
    I performed some troubleshooting steps.
    - As we have some other controllers available over WAN, I  tested the 1242 AP  with 2100, 4400 and also with the same model AIR-CT5508-K9 with SW version                  6.0.188.0 over WAN and this worked always okay.
    - I wanted to be sure that I eliminate any kind of out of sequence packet issue, so I brought down all redundancy L2 links so that the L2 path from the AP to the controller was only through one leg links.
    - I also brought the second controller down to eliminate potential issue with having two of them up.
    - The AP gets its IP from DHCP configured on the C6506 switch, I am always able to ssh to AP, so the IP connectivity does not seem to be an issue.
    - I have more 1242s, all behave in the same way. I also connected them to some other 3750 switches we have in the campus, always the same.
    - As this seems to be maybe a kind of ssl issue, I tried to play with controller settings, like enabling Accept... options  under Security/AP Policy,but this did not help.
    - I also tried to reboot the controller, no improvement.
    - The APs came from the factory, so in the beginning everything was factory default in them. They were always able to download the image from the controller in the very initial phase. I still do have some of them untouched, so I can perform any troubleshooting steps with the fresh one.
    I can reproduce this, can also send debugging logs if needed.
    Any idea on what could be wrong is highly appreciated.
    Thank you.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    This Discussion has been converted into document:- https://supportforums.cisco.com/docs/DOC-23054
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    AIR-LAP1242G-E-K9 10.0.13.28 log
    *Mar  1 00:00:05.922: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:07.536: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot1 1Radio 0
    *Mar  1 00:00:07.672: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 304 messages)
    *Mar  1 00:00:09.809: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    *Mar  1 00:00:09.874: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Mon 02-Nov-09 18:42 by prod_rel_team
    *Mar  1 00:00:09.874: %SNMP-5-COLDSTART: SNMP agent on host wuen4028 is undergoing a cold start
    *Mar  1 00:00:09.964: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:00:09.967: bsnInitRcbSlot: slot 1 has NO radio
    *Mar  1 00:00:10.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:00:10.191: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:10.430: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:00:10.818: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    *Mar  1 00:00:11.212: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:18.315: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.0.13.28, mask 2 55.255.255.0, hostname wuen4028
    *Mar  1 00:00:28.988: Logging LWAPP message to 255.255.255.255.
    *Mar  1 00:00:31.456: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Mar  1 00:00:31.495: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:32.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:32.457: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
    *Mar  1 00:00:38.810: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Mar  1 00:00:47.811: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:00:56.812: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER
    *Mar  1 00:01:07.815: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
    *Mar  1 00:01:07.815: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
    *Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Feb 11 07:52:25.441: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.0.13.5 peer_port:  5246
    *Feb 11 07:52:25.443: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
    *Feb 11 07:52:25.443: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
    *Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
    *Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
    *Feb 11 07:52:30.441: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
    *Feb 11 07:52:30.442: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
    *Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
    *Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
    *Feb 11 07:52:47.644: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Feb 11 07:53:23.999: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
    *Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
    *Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
    *Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
    *Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
    *Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
    *Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    wuen4028#
    AIR-CT5508-K9 10.0.13.5 log
    *Feb 11 09:00:54.824: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
    omplete DTLS handshake with peer 10.0.13.28
                                               *Feb 11 08:59:53.798: %DOT1X-3-MAX_EA
    P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
    client 00:1f:3b:93:dd:4f
    *Feb 11 08:59:51.197: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:c0:a8:e1:b1:71
    --More-- or (q)uit
    *Feb 11 08:59:21.212: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
    rector: Could not find valid channel lists for 802.11bg
    *Feb 11 08:58:39.766: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
    omplete DTLS handshake with peer 10.0.13.28
                                               *Feb 11 08:57:06.131: %RRM-3-RRM_LOGM
    SG: rrmChanUtils.c:292 RRM LOG: Airewave Director: Could not find valid channel
    lists for 802.11bg
    *Feb 11 08:56:24.504: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
    omplete DTLS handshake with peer 10.0.13.28
                                               *Feb 11 08:55:09.693: %DOT1X-3-MAX_EA
    P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
    client 00:1f:3b:93:dd:4f
    *Feb 11 08:54:51.040: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
    rector: Could not find valid channel lists for 802.11bg
    *Feb 11 08:53:56.493: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
    sions exceeded for client 00:1f:3b:93:dd:4f
    *Feb 11 08:53:34.497: %DTL-3-OSARP_DEL_FAILED: dtl_arp.c:1380 Unable to delete a
    n ARP entry for 10.0.13.28 from the operating system. ioctl operation failed
    *Feb 11 08:52:35.936: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
    rector: Could not find valid channel lists for 802.11bg
    *Feb 11 08:52:26.492: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
    sions exceeded for client 00:1f:3b:93:dd:4f
    *Feb 11 08:50:07.680: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
    sions exceeded for client 00:1f:3b:93:e6:57
    *Feb 11 08:48:37.458: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
    *Feb 11 08:47:37.438: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
    sions exceeded for client 00:1f:3b:93:e6:57
    *Feb 11 08:47:34.438: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:16:44:1d:0f:53
    *Feb 11 08:46:32.422: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:407 Max EAPOL-ke
    y M3 retransmissions exceeded for client 00:16:44:1d:0f:53
    *Feb 11 08:46:06.790: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
    *Feb 11 08:46:06.789: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
    ted for client 00:1f:3b:95:61:bd
    *Feb 11 08:46:06.210: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
    *Feb 11 08:45:34.304: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
    ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
    *Feb 11 08:45:34.303: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
    ted for client 00:1f:3b:95:61:bd
    *Feb 11 08:45:01.298: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
    rector: Could not find valid channel lists for 802.11bg
    *Feb 11 08:44:38.076: %SIM-3-PORT_UP: sim.c:9547 Physical port 2 is up!.
    *Feb 11 08:44:38.037: %SIM-3-PORT_UP: sim.c:9547 Physical port 1 is up!.
    --More-- or (q)uit
    *Feb 11 08:44:38.009: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'cliWebInitParms.cfg'
    *Feb 11 08:44:37.980: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'rrcEngineInitParms.cfg'
    *Feb 11 08:44:37.980: %CNFGR-3-INV_COMP_ID: cnfgr.c:2105 Invalid Component Id :
    Unrecognized (81) in cfgConfiguratorInit.
    *Feb 11 08:44:37.928: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'rfidInitParms.cfg'
    *Feb 11 08:44:37.915: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'dhcpParms.cfg'
    *Feb 11 08:44:37.903: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'bcastInitParms.cfg'
    *Feb 11 08:44:37.834: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'rrmInitParms.cfg'
    *Feb 11 08:44:27.331: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'apfInitParms.cfg'                                            
    *Feb 11 08:44:27.226: %MM-3-MEMBER_ADD_FAILED: mm_dir.c:903 Could not add Mobili
    ty Member. Reason: IP already assigned, Member-Count:1,MAC: 00:00:00:00:00:00, I
    P: 0.0.0.0
    *Feb 11 08:44:27.023: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'mmInitParms.cfg'
    *Feb 11 08:44:27.013: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'aaaapiInitParms.cfg'
    *Feb 11 08:44:27.011: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'pemInitParms.cfg'
    *Feb 11 08:44:26.898: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'dot1xInitParms.cfg'
    *Feb 11 08:44:26.868: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'capwapInitParms.cfg'
    *Feb 11 08:44:26.718: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'spamInitParms.cfg'
    *Feb 11 08:44:25.650: %SSHPM-3-FREAD_FAILED: sshpmlscscep.c:1395 Error reading f
    ile /mnt/application/lscca_pem.crt
    *Feb 11 08:44:06.435: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
    figuration file 'sshpmInitParms.cfg'  

    Thanks for such quick response and suggestions.
    Yes, I seem not to to be 100% perfect as for the list of troubleshooting steps I took.
    I had already tried the two commands you mentioned. I tried again, this time with some other 1242, but these do not help.
    Yes, I was already thinking that this could be in theory a licensing issue. The controller is bougth with 25 licenses.
    In the beginnign I had one 1142 on it and tried to enable 1242s which did not work. Now I have five 1142s on it, as this worked okay, I guess it could not be a licensing issue.
    I think that I can see in the log files that the machines communicate to each other, L2 or L3 paths seem to be working okay. I forgot to mention that I am using option 43 on the DHCP server, so the AP clearly finds its way to the controller. What's more both APs and the controllers are in the same VLAN, so they are in the same broadcast domain.
    Below is sho ver from the AP. The AP seems to have Certificate type - manufacture installed, so I guess there should not be a problem with the certificate, especially knowing that the AP works with other controllers over WAN.
    My guess these messages seen on AP especially "Invalid event 38 & state 3 combination" might tell us what's wrong.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    *Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
    *Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
    *Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
    *Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Mon 02-Nov-09 18:42 by prod_rel_team
    ROM: Bootstrap program is C1240 boot loader
    BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)
    AP9caf.ca00.1c78 uptime is 17 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1240-k9w8-mx.124-21a.JA2/c1240-k9w8-mx.124-21a.JA2"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1242G-E-K9    (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
    Processor board ID FCZ135082GH
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 6.0.188.0
    1 FastEthernet interface
    1 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 9C:AF:CA:00:1C:78
    Part Number                          : 73-11479-01
    PCA Assembly Number                  : 800-30493-01
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC13484GYY
    Top Assembly Part Number             : 800-29589-03
    Top Assembly Serial Number           : FCZ135082GH
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1242G-E-K9
    Configuration register is 0xF
    AP9caf.ca00.1c78#

  • Auto Deploy and VCD Network Isolation - Not Working

    Hello,
    I have opened a support case about this issue, but the case is moving a lot slower than I would like to see. I thought I'd post here to see if anyone has ran into anything similar.
    We recently switched our 24-host vCloud cluster (more info about this cluster below) over to Auto-Deploy (was using boot from USB). After the switch, we had a few complaints from customers that use isolated networks. It turns out that only 4 of our 24 hosts were working properly with isolated networks. All 24-hosts are using the same auto-deploy image.
    When the hosts boot up, the vCloud Director web interface shows the following with green check marks: "Status", "Enabled", "Ready", "Available", and "VCD Network Isolation Capable".
    To get my other 20 hosts working, I disabled all 20 hosts in the vCloud interface, unprepared them, and prepared them. After this, network isolation worked for those 20 hosts. When I reboot one of the hosts, the host still looks like it's good in the interface, but network isolation doesn't work until I disable, unprepare, and prepare.
    Here is some more information about our environment:
    vCenter build 2001466
    ESXi Host Build 2702864
    VCD Build 5.5.2.2000523
    vShield Build 5.5.3
    Here is the Deploy Rule that the hosts are using:
    Name        : UCS-2.2.1-pcloud.5.5.aln
    PatternList : {oemstring=$SPT:ESX_PublicCloud_autod.2.2.x}
    ItemList    : {ESXi-5.5.0-autod-2.2.1.vshield}
    I have confirmed that this is indeed the profile being used by looking at the Summary tab for the hosts and seeing the listed Image Profile.
    And here is what's in that item:
    PowerCLI D:\ImageBuild> Get-EsxSoftwarePackage
    Name                     Version                        Vendor     Creation Date
    misc-cnic-register       1.72.1.v50.1i-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-lpfc820             8.2.3.1-129vmw.550.0.0.1331820 VMware     9/19/2013 6:0...
    scsi-megaraid-mbox       2.20.5.1-6vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    esx-xlibs                5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    lpfc                     10.0.100.1-1vmw.550.0.0.133... VMware     9/19/2013 6:0...
    mtip32xx-native          3.3.4-1vmw.550.1.15.1623387    VMware     2/22/2014 1:1...
    net-nx-nic               5.0.621-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    block-cciss              3.6.14-10vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    scsi-fnic                1.6.0.5-1OEM.500.0.0.472560    cisco      9/30/2013 11:...
    net-enic                 2.1.2.42-1OEM.500.0.0.472560   Cisco      9/5/2013 8:30...
    sata-sata-sil24          1.1-1vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    rste                     2.0.2.0088-4vmw.550.1.15.16... VMware     2/22/2014 1:1...
    elxnet                   10.0.100.0v-1vmw.550.0.0.13... VMware     9/19/2013 6:0...
    scsi-aacraid             1.1.5.1-9vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-cmd64x          0.2.5-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    net-cnic                 1.72.52.v55.1-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-adp94xx             1.0.8.12-6vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    net-be2net               4.6.100.0v-1vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-ixgbe                3.7.13.7.14iov-12vmw.550.2.... VMware     4/29/2015 6:4...
    net-igb                  5.0.5.1.1-1vmw.550.2.54.240... VMware     1/1/2015 8:00...
    epsec-mux                5.1.0-01814505                 VMware     5/13/2014 4:3...
    esx-base                 5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    ata-pata-sil680          0.4.8-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    ipmi-ipmi-msghandler     39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    ata-pata-hpt3x2n         0.3.4-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    scsi-megaraid-sas        5.34-9vmw.550.2.33.2068190     VMware     8/23/2014 1:5...
    scsi-mptsas              4.23.01.00-9vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-bnx2                 2.2.3d.v55.2-1vmw.550.0.0.1... VMware     9/19/2013 6:0...
    ata-pata-via             0.3.3-2vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    ima-qla4xxx              2.01.31-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-amd             0.3.10-3vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    ata-pata-serverworks     0.4.3-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    sata-sata-promise        2.12-3vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    sata-sata-nv             3.5-4vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    ipmi-ipmi-devintf        39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    scsi-ips                 7.12.05-4vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    sata-sata-svw            2.3-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    scsi-mptspi              4.23.01.00-9vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-e1000e               1.1.2-4vmw.550.1.15.1623387    VMware     2/22/2014 1:1...
    esx-xserver              5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    net-tg3                  3.123c.v55.5-1vmw.550.2.33.... VMware     8/23/2014 1:5...
    net-forcedeth            0.61-2vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    scsi-aic79xx             3.1-5vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    sata-ata-piix            2.12-10vmw.550.2.33.2068190    VMware     8/23/2014 1:5...
    scsi-bnx2i               2.72.11.v55.4-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    ohci-usb-ohci            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    scsi-qla4xxx             5.01.03.2-6vmw.550.0.0.1331820 VMware     9/19/2013 6:0...
    scsi-qla2xxx             902.k1.1-9vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    net-mlx4-core            1.9.7.0-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-atiixp          0.4.6-4vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    misc-drivers             5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    esx-dvfilter-generic-... 5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    ata-pata-pdc2027x        1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    qlnativefc               1.0.12.0-1vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    lsi-mr3                  0.255.03.01-2vmw.550.1.16.1... VMware     4/15/2014 9:0...
    vshield                  5.5.3-2172759                  VMware     9/30/2014 2:3...
    net-vmxnet3              1.1.3.0-3vmw.550.2.39.2143827  VMware     9/18/2014 11:...
    scsi-hpsa                5.5.0-44vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    tools-light              5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    scsi-mpt2sas             14.00.00.00-3vmw.550.1.15.1... VMware     2/22/2014 1:1...
    scsi-bnx2fc              1.72.53.v55.1-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    lsi-msgpt3               00.255.03.03-1vmw.550.1.15.... VMware     2/22/2014 1:1...
    net-e1000                8.0.3.1-3vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    xhci-xhci                1.0-2vmw.550.2.39.2143827      VMware     9/18/2014 11:...
    ipmi-ipmi-si-drv         39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    sata-ahci                3.0-21vmw.550.2.54.2403361     VMware     1/1/2015 8:00...
    net-bnx2x                1.72.56.v55.2-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-megaraid2           2.00.4-9vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    ehci-ehci-hcd            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    esx-tboot                5.5.0-2.33.2068190             VMware     8/23/2014 1:5...
    uhci-usb-uhci            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    sata-sata-sil            2.3-4vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    vcloud-agent             5.5.0-1280396                  VMware     8/17/2013 4:0...
    net-mlx4-en              1.9.7.0-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    And here is the output of testing the deploy rule compliance:
    PowerCLI D:\ImageBuild> Get-Cluster 0000000-ESXVCLOUDCL1.ALN | Get-VMHost |Test-
    DeployRuleSetCompliance
    VMHost               ItemList
    esx142269.vm.seo.... {}
    esx140622.vm.seo.... {}
    esx139784.vm.seo.... {}
    esx140617.vm.seo.... {}
    esx138793.vm.seo.... {}
    esx135523.vm.seo.... {}
    esx138945.vm.seo.... {}
    esx138794.vm.seo.... {}
    esx139783.vm.seo.... {}
    esx140309.vm.seo.... {}
    esx140310.vm.seo.... {}
    esx140311.vm.seo.... {}
    esx140313.vm.seo.... {}
    esx140339.vm.seo.... {}
    esx140614.vm.seo.... {}
    esx140615.vm.seo.... {}
    esx140616.vm.seo.... {}
    esx140618.vm.seo.... {}
    esx140619.vm.seo.... {}
    esx140621.vm.seo.... {}
    esx141947.vm.seo.... {}
    esx141945.vm.seo.... {}
    esx142271.vm.seo.... {}
    esx142270.vm.seo.... {}
    Here is another vib list from a host:
    ~ # esxcli software vib list
    Name                           Version                                Vendor  Acceptance Level  Install Date
    net-enic                       2.1.2.42-1OEM.500.0.0.472560           Cisco   VMwareCertified   -
    ata-pata-amd                   0.3.10-3vmw.550.0.0.1331820            VMware  VMwareCertified   -
    ata-pata-atiixp                0.4.6-4vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-cmd64x                0.2.5-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-hpt3x2n               0.3.4-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-pdc2027x              1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    ata-pata-serverworks           0.4.3-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-sil680                0.4.8-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-via                   0.3.3-2vmw.550.0.0.1331820             VMware  VMwareCertified   -
    block-cciss                    3.6.14-10vmw.550.0.0.1331820           VMware  VMwareCertified   -
    ehci-ehci-hcd                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    elxnet                         10.0.100.0v-1vmw.550.0.0.1331820       VMware  VMwareCertified   -
    epsec-mux                      5.1.0-01814505                         VMware  VMwareCertified   -
    esx-base                       5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    esx-dvfilter-generic-fastpath  5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    esx-tboot                      5.5.0-2.33.2068190                     VMware  VMwareCertified   -
    esx-xlibs                      5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    esx-xserver                    5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    ima-qla4xxx                    2.01.31-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    ipmi-ipmi-devintf              39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    ipmi-ipmi-msghandler           39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    ipmi-ipmi-si-drv               39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    lpfc                           10.0.100.1-1vmw.550.0.0.1331820        VMware  VMwareCertified   -
    lsi-mr3                        0.255.03.01-2vmw.550.1.16.1746018      VMware  VMwareCertified   -
    lsi-msgpt3                     00.255.03.03-1vmw.550.1.15.1623387     VMware  VMwareCertified   -
    misc-cnic-register             1.72.1.v50.1i-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    misc-drivers                   5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    mtip32xx-native                3.3.4-1vmw.550.1.15.1623387            VMware  VMwareCertified   -
    net-be2net                     4.6.100.0v-1vmw.550.0.0.1331820        VMware  VMwareCertified   -
    net-bnx2                       2.2.3d.v55.2-1vmw.550.0.0.1331820      VMware  VMwareCertified   -
    net-bnx2x                      1.72.56.v55.2-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    net-cnic                       1.72.52.v55.1-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    net-e1000                      8.0.3.1-3vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-e1000e                     1.1.2-4vmw.550.1.15.1623387            VMware  VMwareCertified   -
    net-forcedeth                  0.61-2vmw.550.0.0.1331820              VMware  VMwareCertified   -
    net-igb                        5.0.5.1.1-1vmw.550.2.54.2403361        VMware  VMwareCertified   -
    net-ixgbe                      3.7.13.7.14iov-12vmw.550.2.62.2702864  VMware  VMwareCertified   -
    net-mlx4-core                  1.9.7.0-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-mlx4-en                    1.9.7.0-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-nx-nic                     5.0.621-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-tg3                        3.123c.v55.5-1vmw.550.2.33.2068190     VMware  VMwareCertified   -
    net-vmxnet3                    1.1.3.0-3vmw.550.2.39.2143827          VMware  VMwareCertified   -
    ohci-usb-ohci                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    qlnativefc                     1.0.12.0-1vmw.550.0.0.1331820          VMware  VMwareCertified   -
    rste                           2.0.2.0088-4vmw.550.1.15.1623387       VMware  VMwareCertified   -
    sata-ahci                      3.0-21vmw.550.2.54.2403361             VMware  VMwareCertified   -
    sata-ata-piix                  2.12-10vmw.550.2.33.2068190            VMware  VMwareCertified   -
    sata-sata-nv                   3.5-4vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-promise              2.12-3vmw.550.0.0.1331820              VMware  VMwareCertified   -
    sata-sata-sil24                1.1-1vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-sil                  2.3-4vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-svw                  2.3-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    scsi-aacraid                   1.1.5.1-9vmw.550.0.0.1331820           VMware  VMwareCertified   -
    scsi-adp94xx                   1.0.8.12-6vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-aic79xx                   3.1-5vmw.550.0.0.1331820               VMware  VMwareCertified   -
    scsi-bnx2fc                    1.72.53.v55.1-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    scsi-bnx2i                     2.72.11.v55.4-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    scsi-hpsa                      5.5.0-44vmw.550.0.0.1331820            VMware  VMwareCertified   -
    scsi-ips                       7.12.05-4vmw.550.0.0.1331820           VMware  VMwareCertified   -
    scsi-lpfc820                   8.2.3.1-129vmw.550.0.0.1331820         VMware  VMwareCertified   -
    scsi-megaraid-mbox             2.20.5.1-6vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-megaraid-sas              5.34-9vmw.550.2.33.2068190             VMware  VMwareCertified   -
    scsi-megaraid2                 2.00.4-9vmw.550.0.0.1331820            VMware  VMwareCertified   -
    scsi-mpt2sas                   14.00.00.00-3vmw.550.1.15.1623387      VMware  VMwareCertified   -
    scsi-mptsas                    4.23.01.00-9vmw.550.0.0.1331820        VMware  VMwareCertified   -
    scsi-mptspi                    4.23.01.00-9vmw.550.0.0.1331820        VMware  VMwareCertified   -
    scsi-qla2xxx                   902.k1.1-9vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-qla4xxx                   5.01.03.2-6vmw.550.0.0.1331820         VMware  VMwareCertified   -
    uhci-usb-uhci                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    vcloud-agent                   5.5.0-1280396                          VMware  VMwareCertified   -
    vmware-fdm                     5.5.0-2001466                          VMware  VMwareCertified   -
    vshield                        5.5.3-2172759                          VMware  VMwareCertified   -
    xhci-xhci                      1.0-2vmw.550.2.39.2143827              VMware  VMwareCertified   -
    tools-light                    5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    scsi-fnic                      1.6.0.5-1OEM.500.0.0.472560            cisco   VMwareCertified   -
    Any help is appreciated. Thanks.

    Right now, on my test host (that is not working), I have two VMs, one named "Test 1" and the other "Test 2" They only have an isolated network on them (named "Test Isolated Network") that is in my VDC, and pings do not work between them. If I move them to any other host (that have been unprepared and prepared), pings work. I can move both to the same host, or different hosts.
    Here is the fence info on this host, I'm not really sure how to interpret this:
    ~ # esxcli vcloud fence getfenceinfo
       Module Parameters:
            Host Key: 0x104b0
            Configured LAN MTUs:
            +------------------------------------------------------------------------------------------+
            | LAN ID |    1    2    3    4    5    6    7    8    9   10    -    -    -    -    -    - |
            |    MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500    -    -    -    -    -    - |
            +------------------------------------------------------------------------------------------+
       Active Ports:
            +-----------------------------------------+
            |     ID       |    OPI    | LanID |  MTU |
            +-----------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |     4 | 1500 |
            | 410b1d4cfde0 | 01,0001a2 |     4 | 1500 |
            +-----------------------------------------+
       Switch State:
            +-----------------------------------------------------+
            |   Inner MAC    |   Outer MAC   | used | age | seen  |
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4ce7d0 +
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4cfde0 +
            | 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1  | 1  | 1 |
            +-----------------------------------------------------+
       Port Statistics Summary:
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            |       Identity           |               To VM dropped                         | To VM passed    |     From VM dropped                        |                 From VM passed                      |  Reflect        |
            |   Port ID    | Fence ID  | total  | misunf | misfen | stored | frag   | other  | fenced | join   | unfen  | csum   | frag   | GVT    | other  | fenced | tso    | frag   | csum   | GVT    | ufport | pass   |  error |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |   3991 |      2 |   3976 |      0 |      0 |      0 |     13 |      0 |      0 |      0 |      0 |      0 |      0 |    679 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4cfde0 | 01,0001a2 |   4478 |      2 |   3860 |      0 |      0 |      0 |    616 |      0 |      0 |      0 |      0 |      0 |      0 |    626 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
    And here is the output of the command a little while later on the same host (while my test pings are going)
    ~ # esxcli vcloud fence getfenceinfo
       Module Parameters:
            Host Key: 0x104b0
            Configured LAN MTUs:
            +------------------------------------------------------------------------------------------+
            | LAN ID |    1    2    3    4    5    6    7    8    9   10    -    -    -    -    -    - |
            |    MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500    -    -    -    -    -    - |
            +------------------------------------------------------------------------------------------+
       Active Ports:
            +-----------------------------------------+
            |     ID       |    OPI    | LanID |  MTU |
            +-----------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |     4 | 1500 |
            | 410b1d4cfde0 | 01,0001a2 |     4 | 1500 |
            +-----------------------------------------+
       Switch State:
            +-----------------------------------------------------+
            |   Inner MAC    |   Outer MAC   | used | age | seen  |
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4ce7d0 +
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4cfde0 +
            | 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1  | 1  | 1 |
            +-----------------------------------------------------+
       Port Statistics Summary:
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            |       Identity           |               To VM dropped                         | To VM passed    |     From VM dropped                        |                 From VM passed                      |  Reflect        |
            |   Port ID    | Fence ID  | total  | misunf | misfen | stored | frag   | other  | fenced | join   | unfen  | csum   | frag   | GVT    | other  | fenced | tso    | frag   | csum   | GVT    | ufport | pass   |  error |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |   4696 |      2 |   4681 |      0 |      0 |      0 |     13 |      0 |      0 |      0 |      0 |      0 |      0 |    796 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4cfde0 | 01,0001a2 |   5300 |      2 |   4565 |      0 |      0 |      0 |    733 |      0 |      0 |      0 |      0 |      0 |      0 |    743 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
    Looking at the VDS, the Maximum MTU is set to 1500. Looking at dvs.VCDVSTest Isolated Network-ca9a45c9-1dec-4f95-8b96-68d9c05b2a5d, I see it's VLAN is set to 2535 (which matches the network pool settings) and number of ports is 16

  • Webhelp search not working in 1 project

    Robohelp 8 HTML
    Hi all,
    For some reason, the search in my webhelp output is not working in 1 particular project. No matter what I search for the results are always zero, and I know these words/terms are in there....I've checked across all browsers and its not working anywhere.
    The AIR version of the project searches fine and all works, so its something specific with webhelp.
    I can't figure out why.Is there somewhere that I can check or something I can do, I haven't made any particular changes to the project recently, nothing that I believe should be affecting the search. I tried re-publishing with and without the substring search adn still nothing.
    Other projects I've just published and the search works on them fine.
    Few Notes:
    I do not have 508 compliance on.
    Generating DHTML, not Pure HTML.
    Have tried generating to different folders, no change.
    Fail with and without substring search enabled.
    Any ideas welcome.
    Thanks, Nick
    PS. Probably better for this to be in the webhelp forum, move if you can. Thanks,

    Hi Nick
    This could explain why things broke. It sounds like you need to understand the process better.
    Generating and Publishing are two distinctly different actions. Consider your project to be like baking cookies. When you generate, you are putting the cookies in the oven and out pops baked cookies.
    Publishing is the action of copying content from your local storage to the server. It's like moving the baked cookies to the display case where customers may grab them up.
    A server is a very busy place. The action of generating normally clears and removes content from the location where you generate. It's helpful if nothing else is going on at that time. Thus, we recommend you generate to your local hard drive. Normally to a folder inside the !SSL! folder. Then you configure a server destination where you publish. What you are doing is like removing all the baked cookies (or trying to) and then moving straight from the oven to the display case. Usually you place the cookies in an intermediate spot to cool.
    When you click the Publish button (after you have configured things) RoboHelp will dutifully copy files from your hard drive to the server. The first time through, it has to copy ALL the files. It also makes a list of which files were copied. Then on subsequent publish cycles, only the changed content is published. This means it publishes much quicker. I've seen it where the first publish took perhaps 20 minutes to complete. Five topics were changed and help was re-generated and the Publish cycle took perhaps 15 seconds.
    As you can hopefully see, you probably felt you were saving a step. In reality, you were probably causing yourself an issue.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Custom rendering extensions not working in SSRS Report Designer (rsreportdesigner.config)

    My custom rendering extension is working in Report Builder (in RSReportServer.config), but not in Report Designer (in RSReportDesigner.config):  instead of adding a "TXT" export option, it's just adding a duplicate "CSV" option.
    SUMMARY: 
    Is there a way to get these features working, with Report Designer?
    DETAILS:
    We are running SSRS (Reporting Services) under SQL Server 2008 R2.
    Here's my rendering section:
        <Render>
          <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering" />
          <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering" />
          <!-- TXT extension with help from:  http://social.msdn.microsoft.com/Forums/sqlserver/en-US/d79845a8-17fb-4ec6-b121-2c40cf466d73/how-do-i-add-a-pipe-delimited-option-in-ssrs-2008-report-manager?forum=sqlreportingservices -->
          <Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
            <OverrideNames>
                <Name Language="en-US">TXT(ASCII,NoColHds)</Name>
            </OverrideNames>
            <Configuration>
                 <DeviceInfo>
                     <FileExtension>txt</FileExtension>
                    <FieldDelimiter>,</FieldDelimiter>
                    <Encoding>ASCII</Encoding>
                    <NoHeader>true</NoHeader>
                </DeviceInfo>
            </Configuration>
          </Extension>
          <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering" />
          <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering" />
          <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
          <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering" />
          <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" />
          <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" />
          <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering" />
        </Render>
    When I add the above "TXT" section to RSReportServer.config, then Report Builder (and production) both show an export option "TXT(ASCII,NoColHds)". 
    But when I add this "TXT" section to RSReportDesigner.config, and then (in Report Designer / BIDS) attempt to export from a "Preview" of the report, the export drop-down does not show a "CSV" option followed by a "TXT"
    option, but instead shows the "CSV" option twice.
    This simply limits testing of the export option, to Report Builder... or requires any reports be published from Report Designer before they can be tested with
    this export option.
    (FYI, why this export option:  compliance in our industry requires sending data to government agencies, in text files, with fixed-length columns, and ASCII encoding.  Also, we're attempting to give the production of these files to the *users* managing
    communication with those agencies... so we're putting them into SSRS.
    I worked around the fixed length columns (and no delimiters -- no commas), by writing a version of the report where all string columns are padded, and all columns are concatenated, to form ONE LONG COLUMN... but Reporting Services' CSV export format produces
    a Unicode file (UTF-8, which the agency rejected, because it had a leading "", or "EF BB BF" in hex), whereas the agency requires an ASCII file.)

    Hi Doug_atMidway,
    According to your description, you want to enable your custom render extension. Right?
    In Reporting Services, if you want to deploy the custom extension, you just need to add the extension into rsreportserver.config file.  The
    RSReportDesigner.config file stores settings about the rendering extensions available to Report Designer. Since you still use the csv rendering extension in your assembly, we don't need to do any modification in rsreportdesigner.config file. Pleaes
    refer to the links below:
    Thanks for attempting to help, Simon.  
    As my question states, I've *already done* both the above:  changed (1) rsreportserver.config and (2) rsreportdesigner.config.  I added the same code, shown above, to both files.  I did that so I could see the new "txt" extension
    both (1) when exporting in production and Report Builder, and (2) when exporting in Report Designer's "preview".  
    The change in (2) is not working:  I do not see the "TXT" extension in Report Designer, when I try to export from a preview.  Instead, Report Designer shows the CSV extension repeated.
    Thanks for the docs.  I consulted them (well, I consulted the EQUIVALENT pages, for SQL Server 2008 R2), when creating my block of code above.
    Do you see anything to correct, in my code?
    Are the features I'm using actually working, with rsreportdesigner.config?
    Thanks again, 
    -- Doug

  • WRT54G wireless not working after upgrading to windows vista, please help

    Hello everyone....
    I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
    I just bought a new wireless web camera and that does not work either because the wireless is not working.
    Any suggestions on what I should do to solve this issue?
    I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
    Hope to hear from someone.

    I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
    Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

  • OSB 10gR3 - Process WS-Security flag not working with PasswordDigest

    Hi,
    By Oracle documentation when you set the "process ws-security header" in security section of a proxy service, the proxy service act as an active intermediary and consume the ws-security header received in inbound messages. This feature works fine when you call the proxy service using WS-Security Username Token Profile PasswordText, but when you send Username Token with PasswordDigest I got the following error: +"weblogic.xml.crypto.wss.WSSecurityException: Unable to validate identity assertions"+
    I am using SoapUi to call the proxy with passwordDigest, WSS-Password Type option set to PasswordDigest.
    Proxy configured with:
    General tab -> WSDL based proxy service, this wsdl doesn't have ws-policy definitions inside.
    Transport tab -> Get all headers = Yes
    HTTP Transport tab -> HTTPS Required = No / Authentication = Basic
    Operation tab -> Enforce WS-I Compliance = not checked / Selection Algorithm = SOAP Body Type
    Message Content tab -> default settings
    Policy -> Added Auth.xml(predefined) policy to request policies.
    Security tab -> Process WS-Security header = Yes / Custom Authentication settings = none
    Error --->
    +<01/12/2009 09h34min55s BRST> <Error> <OSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault, message-id: 6198860737666014185--de42214.12549f82d66.-7fdb, proxy: AlphaTests/MyProxy/Proxy/MyLogProxy, operation: null]+
    --- Error message:
    +<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurity</faultcode>*<faultstring>Unable to validate identity assertions.</faultstring>*</env:Fault></env:Body></env:Envelope>+
    weblogic.xml.crypto.wss.WSSecurityException: Unable to validate identity assertions.
    +     at weblogic.wsee.security.wss.SecurityPolicyValidator.processIdentity(SecurityPolicyValidator.java:133)+
    +     at weblogic.wsee.security.wss.SecurityPolicyValidator.processInbound(SecurityPolicyValidator.java:77)+
    +     at weblogic.wsee.security.WssServerPolicyHandler.processInbound(WssServerPolicyHandler.java:54)+
    +     at weblogic.wsee.security.WssServerPolicyHandler.processRequest(WssServerPolicyHandler.java:30)+
    +     at weblogic.wsee.security.WssHandler.handleRequest(WssHandler.java:74)+
    +     at com.bea.wli.sb.security.wss.WssInboundHandler.processRequest(WssInboundHandler.java:155)+
    +     at com.bea.wli.sb.security.wss.WssHandlerImpl.doInboundRequest(WssHandlerImpl.java:201)+
    +     at com.bea.wli.sb.context.BindingLayerImpl.addRequest(BindingLayerImpl.java:257)+
    +     at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:66)+
    +     at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)+
    +     at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)+
    +     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)+
    +     at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
    +     at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)+
    +     at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)+
    +     at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)+
    +     at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)+
    +     at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)+
    +     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)+
    +     at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
    +     at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)+
    +     at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)+
    +     at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)+
    +     at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)+
    +     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)+
    +     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)+
    +     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)+
    +     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)+
    +     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)+
    +     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)+
    +     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)+
    +     at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
    +     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)+
    +     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)+
    +     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)+
    +     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
    +     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+

    Eduardo,
    Yes, but the flag "Process WS-Security header" needs to be set to 'No' and I included a delete node to remove the wsse:Security element from header. Attaching Auth.xml predefined policy to my request operation, causes OSB to include the policy directive in my WSDL, but the PasswordText(see below).
    In Oracle security guide we have steps to configure PasswordDigest in the Oracle Service Bus Security Configuration using the WLS Console http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/model.html#wp1062542
    My doubt is: Is this a bug? "Process WS-Security header" flag is supposed to work with PasswordDigest?
    My WSDL with WS-Policy statements after Auth.xml policy was configured.
    <?xml version="1.0" encoding="UTF-8"?>
    <s2:definitions targetNamespace="http://alpha.tests.org" xmlns:s0="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="http://schemas.xmlsoap.org/wsdl/" xmlns:s3="http://alpha.tests.org" xmlns:s4="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
    <s0:Policy s1:Id="encrypt-custom-body-element-and-username-token">
    <wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
    <wssp:SupportedTokens>
    <wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
    <wssp:UsePassword Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText"/>
    </wssp:SecurityToken>
    </wssp:SupportedTokens>
    </wssp:Identity>
    </s0:Policy>
    <wsp:UsingPolicy s2:Required="true"/>
    <s2:types>
    <xsd:schema elementFormDefault="qualified" targetNamespace="http://alpha.tests.org" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:impl="http://alpha.tests.org" xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://alpha.tests.org" xmlns:s2="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <xsd:element name="EchoRequest">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="send" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    <xsd:element name="EchoResponse">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="response" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    </s2:types>
    <s2:message name="echoRequest">
    <s2:part element="s3:EchoRequest" name="echoPartReq"/>
    </s2:message>
    <s2:message name="echoResponse">
    <s2:part element="s3:EchoResponse" name="echoPartResp"/>
    </s2:message>
    <s2:portType name="MyAlphaPort">
    <s2:operation name="echo">
    <s2:input message="s3:echoRequest" name="echoRequest"/>
    <s2:output message="s3:echoResponse" name="echoResponse"/>
    </s2:operation>
    </s2:portType>
    <s2:binding name="MyAlphaBinding" type="s3:MyAlphaPort">
    <s4:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <s2:operation name="echo">
    <s2:input name="echoRequest">
    <s4:body use="literal"/>
    <wsp:Policy>
    <wsp:PolicyReference URI="#encrypt-custom-body-element-and-username-token"/>
    </wsp:Policy>
    </s2:input>
    <s2:output name="echoResponse">
    <s4:body use="literal"/>
    </s2:output>
    </s2:operation>
    </s2:binding>
    <s2:service name="MyAlphaBindingQSService">
    <s2:port binding="s3:MyAlphaBinding" name="MyAlphaBindingQSPort">
    <s4:address location="http://CLXSP0272:7001/MyAlphaService"/>
    </s2:port>
    </s2:service>
    </s2:definitions>

  • Captivate 4 SCORM not working, Exit Button Not working

    Hi All-
    I hope somebody can help me out because I am at the end of my rope with Captivate.
    I have a project that is in the final stages, I'm attempting to publish it to our LMS and it is not tracking properly, it is initializing the LMS and it is recording a "Started" status, but I can not get the completion status to work properly.
    I really don't want to include a quiz at the end so these are the settings I have used:
    LMS Standard: SCORM 1.2
    Report Status: Complete/Incomplete
    Report To LMS As: Percent
    Choose report Data: User Access Only
    Reporting Level: Interactions and Score
    I have tested every possible setting I can think of and the bloody thing will not work!
    Somebody please help me, because I do NOT want to have to start this over with Articulate!

    Hi Nathan
    In addition to the other advice, I believe that you need to have at least one scorable object in order for the reporting to work. For example, sometimes folks need a simple acknowlegement that the content has been viewed. I believe this is the case with SOX compliance. In cases like these, you insert a simple Button object the user clicks. Configure a quiz. You don't need actual question slides. You configure the button to report back the click.
    I didn't see anything about the Exit button, but the Exit button is unreliable at best. If you are clicking the Exit button and it's not working for you, take a look at the info below:
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • WRT600N WRT310N PPTP will not work in some cases

    Hello All,
    This is more of a warning than a request for help. If you are using the WRT600N or the WRT310N and you need to use PPTP VPN connections, these are not the routers for you!
    The PPTP support only work with MS PPTP Servers, it does not work with other VPN routers such as Nortel Contivity's and others.
    Please read other threads in this forum, in most cases the wireless connectivity does not work properly, and the router is prone to freeze, requiring it to be hard booted often.
    (Mod note: Edited due to non-compliance to forums guidelines.)
    Message Edited by OnnagokorO on 05-24-2008 08:37 PM

    Just to update everyone... Firmware Version 1.01.36 Build 3 does not fix the PPTP issues with the WRT600N router.

  • Right Click not working on SCCM console

    Hi All,
    I have SCCM 2012 R2 CU4 in my lab were Right click is not working. I think there is a problem with the console, it was working fine after the upgrade so i am sure it was not an upgrade issue.
    Please help.
    Thanks,
    Pranay.

    Ya,
    it's working on the monitoring tab, but not working for Administration, Software Library & Asset & Compliance.
    I have full admin rights.
    Thanks,
    Pranay.

  • Successmaker program not working behind Cisco SA520

    My customer is a small school in British Columbia. They have used the Successmaker program (written by Pearson Education) to teach numeracy and literacy skills. Since installing a SA520 the teachers are saying that Successmaker does not work properly.
    I am at my wits end.
    I have disabled content filtering for the SA520, I have disabled IDS on the SA520. I am using the default outbound firewall rule allowing inside addresses access anywhere on the Internet, and I have created an inbound firewall rule allowing all traffic and all services from the Successmaker server IP address that their tech support gave us.Their app is still unable to work properly.
    What am I missing?
    Before the SA520 was installed the school was using PAT to map different ports on the public IP on the school cable modem to inside addresses. The whole school was a big DMZ, and any port scanning would have reached into their network. The port mappings were never communicated to the Successmaker folks, so I doubt they were ever relevant to the issue. The Successmaker App is web based, and according to their tech support uses "transfer encoding:chunked" technology. I read up on this and it dates back pre Web 2.0 (pre flash, pre silverlight, pre basically the silicon chip). It is discussed in RFC 2616, the SA520 is Linux based, not IOS based. Does that mean that it does not understand RFC2616? I doubt it, and even if it didn't understand RFC 2616 surely all the steps I have taken above would blow a hole the size of a barn door through the firewall?
    If this weren't a school would not be as emotionally connected as I am to their situation. Without this firewall they will be without much protection at all.
    Can you help?
    Message was edited by: dirkventer - I added the feedback received from Successmaker tech support. It suggests that the Cisco SA520 may be a problem, something I don't want to believe.

    Hi Quendale
    I'm sorry to say that putting a student computer in the DMZ didn't resolve the issue.
    In setting up the DMZ I made the following changes -
    1) I confirmed that the Option interface was in DMZ mode, and that it had a static IP on a new subnet.
    2) We also configured the DMZ DHCP to assign addresses in the subnet, using the firewall DMZ IP as default gateway, and using the firewall DMZ IP as DNS server.
    3) I created a default firewall rule allowing all outbound traffic from the DMZ to the Internet, and created a firewall rule allowing all inbound traffic from the Successmaker server on the Internet (insecure) zone to the DMZ.
    4) I confirmed that IPS was off for the DMZ (Default) and that the content filter exception for the DMZ was still disabled.
    The same problem occurred, which makes me believe that the reason for the application not working in the LAN zone had nothing to do with IPS or content filtering. As far as the firewall rule goes, the impact of the inbound rule seems to have been the same - i.e. ineffectual.
    Connecting the PC running successmaker directly to the school cable modem works.
    The possibility that the application in question has traffic blocked because of a RFC (2616?)  governing the way get and post requests should be formatted would still exist so long as integrity/compliance checking of packets is something that cannot be bypassed via the firewall configuration. Suffice it to say that the application appears dated and uses nothing of web 2.0. One of the options available to my customer is the purchase of the Web 2.0 version of successmaker ($600/seat), but they are only prepared to explore this option if the indications are that the older application, not the firewall is at fault. Pearson Education support swears blindly that thousands of BC school children continue to use the old app behind Cisco firewalls. I don't deny that the possibility exists that the Pearson support technician is stretching the truth, having an older application that has ceased to function with more sophisticated firewalls because RFC violations in packet formatting have become significant would doubtless present a solid easy-sell for their upgraded version, which is expensive, especially for a school.

Maybe you are looking for