Issue facing while opening a Canvas application in Webstart

Hi experts,
Need a help on the issue: issue was like this:
I have created a Canvas application in Swings. And It was running fine. The next day i have compiled again the code and build the class and after jar. Deployed in Tomcat.
Started the webstart and launched the application. Now If I am opening the Canvas which I have required it is giving a error called " Identifier Not found".
For this issue i tried in these ways: I kept the S.O.Ps in the initialize() method and the respective methods like extractConfigurationParameters(), jbInit().
But once the control reach to jbInit() it is not continuing.. Even i can see the S.O.P first control in the java console.
Please help me to fix it.
With Thanks
Kishore

always check in this way - your number of column count for the Jtable, tableInit(), and tableColumnconntent(). these will load at the time of convas initialisation.
Nicky :-)

Similar Messages

VGS-1501 Error while opening the canvas in the form module

Hi All,
I am getting “VGS-1501: <message not found>” message while opening the canvas. Actually in my machine Oracle Apps R12 is installed. To work on forms I have opened form builder and created a data block manually and created a canvas in the form module manually. To add items on the canvas, when I am clicking on canvas then first I am getting “VGS-1501: <message not found>” error message and then after canvas is getting opened. But here in the canvas there were no items available in the side tool bar.
Then I decided to build form through wizard. Once the form was created, then when I opened the canvas then again I got the same error message. Here when I tried to run the form, then the form got closed automatically. This problem is related to forms only because I am able to work on Oracle Apps (functionally) and also I am able to develop a report using report builder. Can somebody please help me to fix this issue
Thanks
Thahessen

I got something sililar behaviour when I use different version forms in different version of developer environment. Sometimes your Forms_PATH and REPORTS_PATH may be point ot wrong version.
This is only a assumption...

Rep-0756 problem facing while opening the report in 10g

Hi,
I am facing problem while opening RDF in oracle 10g.
I follow the next steps.
1. Open the RDF in 10g.
2. Open the PLL in report builder and compile that PLL and save in same path where report located.
3. reattach the library with RDF.
4. Close the RDF
5. Reopen the RDF and facing the error.
6. REP-0756- unable to open attached............
7. I set the report_path in Registry also where PLL exists
Please give me the solution for this problem
Waiting for quick reply.
ashok

Thank you fs,
I am also facing the similar issue in reports 10g, I am keeping the .pll file in my local machine say c:\me\reports\xyz.pll. When I am opening this pll, I am getting the error REP-0756 though the path 'c:\me\reports\' is added to the REPORTS_PATH. Your suggestion resolved the issue.
Many thanks,
Lokesh.

Access Denied error while opening the deployed Application

Hi,
When I try to open my deployed application I get the following error:
weblogic.net.http.SOAPHttpsURLConnection
Im using the following code in my application:
URL wsURL = new URL(wsLocation + "?command=login");
So I went ahead and changed my code to this:
java.net.URL wsURL = new URL(null, wsLocation + "?command=login",new sun.net.www.protocol.https.Handler());
But I got the following error:
access denied (java.lang.RuntimePermission accessClassInPackage.sun.net.www.protocol.https)
Also I believe sun.* packages are not supported anymore on cloud. I think it might be because of this it failed the second time.
Is there any workaround for this?
Regards,
Abhishek

Access denied indicates the user account uploading the file doesn't have access to the library, or sometimes it means there's already a document in the library with the same name that was never checked in. It's also possible that your template contains
custom code that tries to do something that is not allowed.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Error while opening the ORACLE application

hi
when i am opening the Oracle application(DB & oracle forms) -frm-40815 message is coming and when i say enter and it is asking me database details. I checked the oracle services and they are in started state and server path is also pinging but i am not able to open the application. so i restarted the server .
After restarting the server the application started working fine.
But this is happening daily when the day started . Please let me know if any thing i need to check.

Thanks John, that's the solution. For some reason I'd forgotten that DCErrorHandlerImpl exists in the controller layer, not the model layer, so it makes perfect sense to override it and do the redirect.
Here's what I came up with:
@Override
public void reportException(DCBindingContainer dCBindingContainer,
                            Exception exception) {
    try {
        String message = exception.getMessage();
        if (message.indexOf("JBO-26061") >= 0) {
            FacesContext.getCurrentInstance().getExternalContext().redirect("faces/ErrorPageJDBCFailure.jspx");
        } else
            super.reportException(dCBindingContainer, exception);
    } catch (IOException e) {
}The following OTN post shows some other methods to do the redirect: JSF forward Vs redirect
Cheers!
CM.

Slow respone while open Gallery and Application

I have Nokia X6 with lates software version of 20.0.0005. whenever i press Gallery or application, it doesnot respond at all, i have to exit out to main screen and then go back to gallery or application.
If i select ringing tone as video and keep my ringing in asecnding option, my phone doesnot ring atall.
Please help...

Hello!
when I press to enter the gallery, the background image appears and then disappears. no phone block.thus it does not open.
for the battery, I tried the hard reset, he asks for the code, I entered it but he does nothing until I press cancel, where it return back to its initial state (On state).
I searched for the N70 software update but I could not find it, can you please give the PATH.
I appreciated your fast reply.
Thanks

Problem faced while opening the Manage tab of DSO

Hi All,
I am trying to open the manage tab of the DSO to activate the request to load the data, But it is throwing the ABAP error when ever I am trying to open the manage tab.
The error message is some thing like this " Short text of error message: |
Scheduler
Long text of error message:
Technical information about the message:
Message class....... "RSM1"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
| Variable 3.......... " "
any help on this will be very help ful.
Thnaks,
vinay

Hi
Step1
Go to tcode SE16 and query the RSODSACTREQ table to find all records where the DATAPAKID > 0 for the DSO you're trying to manage and delete all of those records. This should leave records that have a value in the DATAPAKID = 0.
Step2
Query the RSODSACTREQ table again, after the deletion, to find all of the records where DATAPAKID = 0. Change the value of DATAPAKID to 2 for all of these records.
After completing these two steps, you should be able to manage the DSO.
Santosh

Issues faced while setting up SSL for ADS (Java + ABAP)

Hi,
Connection test to test SSL connection to ADS using program FP_PDF_TEST_00 fails with the following exception:
ERROR CODE : 100.101
ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure(100.101).
I have exchanged certifcate between Java (ABAP stack client certificate uploaded in trusted CA, also assigned to SSL port socket and is asigned to ADSUSER) and ABAP stacks for authentication.
Using web service navigator to test the ADS web service fails too:
https://cx8.vshodc.lntinfotech.com:50001/AdobeDocumentServicesSec/Config?style=rpc
It displays the page to enter userid password. I have entered correct credentails still the same page is displayed on selecting SUBMIT.
Any help on this would be highly appreciated!
Thanks,
Chitrali

Check the notes and suggestions on this threads,
ADS: ICM_HTTP_CONNECTION_FAILED
Re: Adobe document service error: SOAP Runtime Exception
That might help
Regards
Juan

Rfc error while opening query designer

installed sap gui 7.20 on my system to access sap ecc or BI.
now my issue is while opening bex query designer of BI. it prompts me
Error Group
RFC_ERROR_PROGRAM
Message
Ent
please suggest me what actions to be taken

hi deepak and markus,
evarything is doing well.. i am to operate ECC and BI. i can navigate through all the screens
but the problem is i am not able to use query designer..even through query analyzer i am not able to navigate to query designer.
pls suggest me whether i have to do any modification after installing GUI
while executing rrmx in BI system it prompts me with status message as "please install excel as viewer"
the other thing i found is that applicaton server is working in past date..and i tried it by changing it to application server date.but still i face the same proble..
Edited by: satishchow on Dec 6, 2011 1:16 PM

I cant open an important application because powerpc apps are no longer supported. what to do please

Can someone please advise on resolving issue I cant open an important application because powerpc apps are no longer supported. what to do please
using macbook air

iOS doesn't run on MacBook Airs.
Use this tip to identify your MacBook Air:
How to find your Mac's model and age?
Only MacBook Air 4,1 and later can't run Snow Leopard natively.
That said, there are options with this tip if it turns out you do have that MacBook Air or a later one:
https://discussions.apple.com/docs/DOC-6841
To find all your PowerPC Apps see this tip:
https://discussions.apple.com/docs/DOC-6271

Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale

Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.

Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna.

Am facing Apps issue in iphone 5, while opening it, its asking for apple ID, after entering apple ID also, it is not opening.

Am facing Apps issue in iphone 5, while opening it, its asking for apple ID, after entering my apple ID also it is not opening.

Please let me know the how to rectify it, Am still facing issues in opening Apps in iphone 5. :-(

While Opening HFM application getting Error : "A connection to the server has failed. (status=503)"

Hi All,
While Opening HFM application I'm getting Error : "A connection to the server has failed. (status=503)".
I Checked the Doc ID 1516598.1 and tried to increase the timeout setting, which really didn't help.
Where can check a log for this connection issue, not able to see any error in Starter or HFM server logs.
Please help me to fix this issue.
Server: Windows 2008 R2
EPM Application: 11.1.2.2
Database: Oracle 11g
Regards,
Rajeevan D

Hi!!
     I am facing the same issue and have increased the timeout setting according to the Doc ID 1516598.1.
     When I open up the app, it takes more than 5 minutes but it just get little longer and I've got the error....
     My HFM is at 11.1.2.2.300 version.
Server: Windows 2008 R2
EPM Application: 11.1.2.2
Database: Oracle 11g
Thanks

Issue while opening webi reports using OpenDoc url in Chrome browser

Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
Gokul

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Error while opening the application help

Hello,
We are trying to open the application help from the R/3. It is giving
us the follwoing error.
This is linked to the knowledge warehouse server 6.20.
Error:
SAP Internet Knowledge Server
The IKS cannot display the page you asked for.
Please contact the administrator if this problem persists.
Additional infomation:
RFC Error: System exception raised, connection closed (SIW_IKS_VAR_GET)
RfcRc: <3>, ErrorInfo:
The confuguration looks fine as per the note # 381266.
The help is working fine previously.
Thanks in advance.
Best regards,
Madhav.

Hi Arun,
Error due to incorrect installation of life cycle designer.
check the below links for solution.. ( same issue ).
Error Message "Error while Opening the Document"
Error - Adobe Live Cycle designer
Regards
Srinivas

Issue facing while opening a Canvas application in Webstart

Similar Messages

Maybe you are looking for