Issue in populating Limits Value of PO in its Line item

Hi All,
    There is an issue while creating a PO from PR.
    When we change the Item Category of the line item to 'B'. it is asking to enter the Limit value in the LIMIT Tab of the item detail.
    In our example we enter expected value field say 20000.00 to check it is updating the value in the line item netpr value. Actually it is not updating the value in the line item (NETPR).
But we if you change it again with the other value in the limit tab i am able the see the changed value in the NETPR of that line item(in Table-Control).
Can any one help me on this or could you tell me where exactly the value of NETPR (line item) will get changed.
Thanks in Advance!...
Regards,
Ramkumar.K

Hi Eswar,
Thanks for your information.
My question is why it is not taking the expected value in the line item netpr for the first time.
But I am able see the expected value in the item netpr if you are changing the value of Expected value again.
Can you help me on this. Thanks!...
Regards,
Ramkumar.K

Similar Messages

Issue in populating dynamic values in smartform

Hi Experts,
I am facing some serious alignment issue while populating dynamic values in smartform.
Through table, I am populating dynamic values in smart form. If my internal table contains 20 records , first 10 records are populating in first page and remaining records are populating in next page properly. But here issue is whenever that first 10 records are populated in first page system automatically leaves empty row at the end of page. Ideally it should not happen. please tell me how to solve this issue.
thanks
Karthik

Hi,
I was wondering how are the bold lines output, if you only have one line type... is the Table node executed multiple times under the loop node, where the bold text is implemented as separate text node..? It should IMO actually not affect the output of the table in any negative way if it's done so - just curious
With the "protect" I meant this baby:
You could also try to download and attach only the (upper) node involved in the output of table instead of whole form, if there is something in the form that should not be seen publicly...
cheers
Janis

Which table has Batch# value as seen on PO line item ?

Hello friends,
The Purchase Order line item shows a field for Batch-number. However, this field is not there in EKPO table. So can someone tell me which table has the Batch# value (as seen on PO line item) and how it is linked to that line item's record in EKPO table ? Thanks for your help.
- Chetan

Hello,
I found one field in table EKET. (EKET-CHARG)
BR
Csaba

Issue in creating limits value for service PR using BAPI_REQUISITION_CREATE

HI Experts
I am creating a service PR using bapi bapi_requisition_create.I am able to create service PR successfully, but I am not able to set value for overall limit and the Expected value.
I am passing the limits values through bapi, but when I am trying to display those value in the limits tab in ME53N, it gives dump.
Please suggest how can I set the limits value.
regards
Ashwini

Could Ashwini or anyone else please suggest how this issue was resolved? I am using BAPI_REQUISITION_CREATE, but the limits I enter in the REQUISITION_LIMITS table, do not get saved, although the Purchase Requisition itself gets created.

Comparing and picking the right value form one of the line item in a doc.

Hi Gurus,
I have requirement such that I have to show the tax jurisdiction code of only one item. That is if there are 5 line items with in a document and each one has diffeerent tax jurisdiction code, then we should be showing only one tax jurisdiction code for a document. Line items are not displayed in report. The condition to pick up tax jurisdiction code is the one which has least ending zeros.
Supppose
Doc1          Item          Tax Jurisdiction code
1800000002       1          CNQC00000000000
1800000002       2          CNQC00000000000
1800000002       3          CN0000000000000
1800000002       4          CNQC00000000000
1800000002       5          TXJOHNCLEBUR000
I have to display the value of tax jurisdiction code corresponding to item 5 as its has least zeros in it.
So what I am trying to do is add another custom z object tax jurisdiction code and the value for this is populated using a routine in the update rules, such that comparing all the tax jurisdiction code for all the corresponding items in a document.
Now the question is if I am reading all values of document no. line item and tax jurisdiction code into an internal table form communication structure for a data package. And in the update rule I will be writing a routine comparing the values of tax jurisdiction code from internal table and populating the desired value. Now the big question for me is if there are two line items of a document in one data package and another 3 line items of the corresponding same document in data package 2 then how can we compare the values of Tax jurisdiction code of all the 5 line items of a document.
If this can be achieved using customer exit on the front end let me know and just inputs how the abap code would be or if not do I have to write abap in updates rules. I just want to know how to compare different values of Tax Jurisdiction code and select the one with has least ending zeros. For information the tax jurisdiction code is of type character and length 15.
Any help is really appreciated.
Thanks,
Raj

Yes, it's possible. Just use a regular text item. Create an LOV using the LOV wizard. When you define the query for the LOV's record group, enter a statement that selects from the other database table. Set the return value of the appropriate LOV column to be the text item on the form. Finally, assign the LOV to that text item, so that the LOV pops up when the user presses the LOV key with the cursor in that text item. You can also set the LOV so that it automatically displays when the cursor enters the text item.
Just look up LOV in online help if you need more info.

Report for PGI & billing value with reference to SO Line item

Dear all,
Please guide me whether there is any standard report available to check the PGI value and billing at a time with reference to a sales order (line item).
Thanks & regards.
Pranab

as far as I know there is NO such standard report.
you would try to build sap query based on VBAK/VBAP using VBFA checking LIKP/LIPS and VBRK/VBRP...
but you may request abaper for more professional report with MKPF/MSEG and BKPF/BSEG

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

How value determined for Inv offsetting line items

Hi,
I want to know the following for the reversal of Process Order for materials for which the price control is 'S'.
How the value for GBB (Inventory offsetting) is determined. I have observed it taking the weighted rate of the (Summation of the Total Actual Cost / Sumation of Actual Qunatity) * Reversal Quantity. The BSX line item is determined by Standard Price * Reversal Quantity
The balance is posted in the Price difference.
I want to know why this difference is determining tge line items.
I have gone thru SAP Note 216080 in this regard but failed to understandard the basic resaon why this is happening.
Regards
Partha

Hi,
When you do the reversal of the Production consumption.
There may be two type of consumption for production,the raw matrerial with V price determination & Semi finished goods with the S pricing.
So when you do the reversal entry the Value & Qty update will be happen in the Inventory.
Say when consume the system will capture from GBB with valuation class.the G/L with P&L Account.
When you reverse the same then it will reverse with same G/L & assignment.
There will be 2 entry one is reversal from consumption G/L & post to Price difference,then other document with reverse price difference & post in the inventory account Balance sheet account.
So 2 entry will be entered during reversal.
If there is any difference then the difference amount will posted to price difference account.it will update the inventore also with qty & value.
Regrds,
Raj.

Value of Infocube and ODS Line Item for a Reporting User.

Hi,
I want to give authorizatoin to a reporting user for InfoCube as well as ODS Line Item . I tried give values of InfoCube as well as value of ODS Line Item in Auth. Object "S_RS_COMP" in the field of Infocube. But it only accepts the value of Infocube. Then where shall I specify the value of ODS Object.
Please guide
Sam

Hi Suneel,
Thanks for your reply.
Do you mean to say the check box in RSA1->EDit ODS Object->Settings->BEx Reporting ?
If you mean the same one, then it is already checked. But still am not getting the ODS Names in Infocube field of S_RS_COMP.
Regards,
Sam

Fixed Value date- in Sales Order Line Item

Hi ,
The Filed Fixed Value Date , from where it gets the value.
In My Case One Perticuler Material the Fixed Value Date is comming as Previous year date for todays billing document.
How can avoide this fixed value date for the Sales order at Line item level. Where the Config is done for this.
Thanks & Regards,
Sridhar Sha

Hi Sridhar,
I dont think this feild is coming from some customization, I think user need to enter it manually.
If it comes by default in your case then please check, have you created current order with the refrence of old order?
Because there is some chances that the date iscoming from the refrencing document.
Regards.
MT

Customer number to be populated as co pa characteristics in rev line item FB50

Hi
FB50
Debit Customer
Credit Revenue with profitability segment as cost object
In profitability segment customer number has one of the characteristics.
In this credit line above we need to populate the customer field (which is part of co pa characteristics)
from debit line item as part of co pa characteristics.
Is it possible. An earliest response would really be appreciated.
Aparrajith

Hi Aparajith
You can write your Code in the exit COPA0005 on the similar lines as provided in the Note
I have asked people to implement the note in similar occassions in SCN Forum and till date no one has said that this did not work..
I would suggest ask your ABAP guys to debug and check the reason for not working.. Else, writ your own code
Br. Ajay M

Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

Hi Gurus,
I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
When i execute the report for a cost element 510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
Kindly adivce

Try to look if there is any filtering criteria applied in the report to which you drill-down.
The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

How to avoid XVBPA line item values while creating sales order

Hi Friends
I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
So this line item also coming in VBPA table, because its different from header data.
Anyone guide me, how to avoid this problem while booking order through program.
Thanks
Gowrishankar

I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
its not copying the same value from header to line item.
In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
Thanks
Gowrishankar

Value of NET in Sales Order item (Pricing)

Hi,
I have created a Price correction order. Where I put the corrected price and all the calculations happen on the entered corrected price. Like the discounts and taxes.
All the calculations in the Pricing is perfect.
But the value in Net for the line item is calculating incorrect value.
For e.g. If Corrected price is 100 and the Net value for this is 60 (including discounts and taxes). Then the value in Net in the Sales order will show the Value (100 + 60) = 160.
All the calculations in the Pricing procedure are perfect.
Please help me with this issue, How the value is NET (Sales order item) is calulated. Is this associated with any routine.
Thanks and regards,
Sheetal

Hi,
NET will be Prices + Surcharges - Discount.
so, see the discounts and surcharges in your order.
And, please give all the condition type and corresponding rates in the next post, so that i can be more helpful.
thank you

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Issue in populating Limits Value of PO in its Line item

Similar Messages

Maybe you are looking for