Issue in Credit Memo Posting in ECC against SAP TM Freight Order

Hello Experts,
I have created Credit Memo against TM Freight Order and Transferred to ECC.
Sender Outbound Service Interface on TM Side "TransportationOrderSUITEInvoicingPreparationRequest_Out" was successful.
But Receiver Inbound Service Interface on ECC Side is failing "TransportationOrderSUITEInvoicingPreparationRequest_In"
XML analysis gives below error message:
No instance of object type Purchase Order has been created. External reference
PO header data still faulty
Enter a vendor
Please enter items first
I was able to create a Service PO and Service Entry Sheet for FSD created against same Freight Order, so I don't see any issue in Config.
Thanks and Regards,
Arnab Biswas

Hi Arnab,
As understood, standard interface creates Service PO in ECC for your Freight order in SAP TM.
Then you are trying to create Invoicing document linked to the created service PO, which is just like FWSD of Freight order. Inbound XML data will give you thorough picture of this issue.
General Analysis :
When FWSD created in TM for Freight Order interface "TranspOrderSUITEInvoicingPreparationRequest_Out" is triggered and it will pass the same TM data of Freight Order to create invoice in ECC and not like the Service PO.
Kindly check your inbound XML with data in it.
You might need to change in outbound interface BADI while sending data out from SAP TM, or in inbound BADI to modify incoming data in ECC.
In SAP TM SPRO search with below content.
BAdI for TranspOrderSUITEInvoicingPreparationRequest_Out
or
you need to search inbound BADI in ECC side to make changes in inbound data.
Reward if found useful..
Thanks and Regards,
Kalpesh

Similar Messages

  • Asset depreciation issue after Credit memo posted to asset.

    Hi,
    We bought asset on 2010 Dec with price 100,000 SGD last year. The asset, monthly depreciation = 833.33 SGD with 20 year useful life.
    This month, we received an CN to minus 20,000SGD for some reason.
    Hence I do credit asset with transaction type 160, post 20,000SGD to this month.
    Seem like now system are getting current NBV to calculate the depreciation for remaining useful life. It is not they want.
    Business assume to get positive depreciation this month to re-adjust back the 20,000SGD depreciation to this month.
    How to get month depreciation value 666.66 SGD after this asset? Hope you can suggest me.

    Recheck your Multi Level Method in AFAMS. You should use the base value 24.
    Have to ticked "remaining useful life"
    Also, check your OAYR settings? Did you select "Smoothing"

  • Credit Memo posted against Service PO

    Hello Experts,
    Our client wants Credit memo posted against Service Order PO's should credit the Service Entry sheet. This credit memo should reflect in PO history as well. Is there any such configuration? or how to meet this requiement...
    Please suggest.

    Hi Sridhar,
    Its a business requirement.
    Suppose we have posted SES of total value 1000 USD. The same will be reflected in the actual value in Limit section of PO.
    So when, after IR, we post credit memo it should reflect in the actual value. Say after posting credit memo of 200 USD, the actual value becomes 800 USD.
    Came to know from somewhere that the problem is in configuration but not able to find out the same.
    Can you please help.

  • Vendor Credit Memo posting to Asset when invoice did not

    Hi Experts,
    We are on SAP 604 and have the following scenario.
    PO to purchase an asset at $10,000.  (not an inventory item).
    Goods receipt has NOT been done.
    1st invoice comes in but is only for half of the asset.  (.5 qty at $5,000)  does not post to asset since there is no GR done.
    Postings:
    Debit 201010 $5000
    Credit 201015 $5000
    2nd invoice is data entered wrong.  It is for the remaing half but Acts Pyble enters quanty of 1 instead of .5.
    Debit 201010 $5000
    Credit 201015 $5000
    When reversing the second invoice (or even just entering a credit memo), instead of the posting doing a simple reversal of hte invoice like this :
    Debit 201010 $5000
    Credit 201015 $5000
    SAP posts to the asset even though there has yet to be any other postings done to the asset (no GRs and no invoices have posted to the asset).  Credit Memo posts like this:
    Credit 201010 $5000
    Debit 201015 $6666.67
    Credit Asset: $1666.67
    Please confirm whether you see this posting as an issue for the asset.  I have posted an OSS message to SAP and they are saying the system is working as designed unless I gather enough business requirements to do a development request.  I'm trying to see if this posting is just an issue for my organization.  Typically we would not expect a Credit Memo to capitalize the Asset.  - Or if you know of a fix, please let me know.
    Thanks!
    Cindy

    If you do not want negative posting/ balances in your asset, you can configure the depreciation areas to allow positive values only. That way if balance is negative (as in your example), posting is not allowed.

  • Credit memo Replication to ECC

    Hi Experts,
    Please help me to resolve the credit memo replication to ECC.
    Credit memo Replication to ECC
    * Re raised the thread as the configuration is related to SD
    Thanks in advance

    Hi Ms.Bhargavi,
    Sorry for the delayed response. I just went through your previous thread therein I went through the link provided by Mr.Warren Nash in details. I believe your configurations and data flow is all fine. The problem is:
    The system uses the item object type to determine whether data should be transferred to SAP ERP, and then executes the data replication.
    Only items with the following item object types are replicated: returns requests, substitute deliveries, repair submissions, repair return deliveries, loan device deliveries, loan device pick-up requests, and returns authorizations. Items with the item object type CRM Customer Complaints Item are not replicated.
    The subitems created in SAP CRM (item categories REN, TANN, RSUB, RRET, LOAN, LRET, and RAIN) are replicated to SAP ERP as main items.
    As you can see Credit Memo Request is not one among them or COMP/G2N. The link also says that:
    If you generate billing documents for debit memos or credit memos created in SAP CRM, the billing amounts are posted in SAP FI. Revenues are posted to the relevant profitability segment in SAP Controlling (SAP CO).
    So why not directly generate Creit Memo from FI side of ERP and do a posting of it?
    Regards
    Vijay

  • Credit memo posting using SUS (in SRM 7.0)

    Hello,
    We are implementing SUS in SRM 7.0.
    We are facing issues in Credit memo processing through SUS though Invoice gets posted properly.Probably I am missing some configuration step.
    Could anyone please share the set up for credit memo process using SUS?
    Thanks
    Raman.

    Hi,
    P-Card is not supported in Classic Scenario because of MM side capability.
    Configuration Guides are available in SAP Solution Manager or offline download version in http://service.sap.com/srm-inst .
    Regards,
    Masa

  • ASN Received Quantity is getting doubled after GR posted in ECC against SNC

    ASN Received Quantity is getting doubled after GR posted in ECC against SNC inbound delivery.
    This behaviour is same in MIGO and also in VL32N.
    Would appreciate if any one who implemented SNC got this issue.
    Thanks,
    Mahesh

    Hi Mahesh,
    I have face this issue when GR information is sent to SNC 2 times.
    We are using RSMIPROACT report to update GR status to SNC in that we have notice it does not check that ASN GR is sent to SNC.If you execute RSMIPROACT report 2 times then it will show GR quantity in SNC double.
    If you execute 3 times then will be show 3-times there is no check in RSMIPROACT report.
    You are getting issue because you are sending GR information multiple time.
    Solution for this is execute once day(midnight job) then  you won't get this issue.
    Thanks,
    Nikhil

  • Issuing a Credit memo - G/L account is missing

    Why the error message coming up when you issue a credit memo.  It says the G/L account is missing.  what could be the problem?
    Thanks
    SV Reddy

    Your Sales Credit Account is not defined.
    It depends on the item you have on the Credit Note which you would like to create. Go to Item Master Data of this item, Stock Data tab.
    For the 'Set GL Accounts by' there are 3 options: by Warehouse, Item Group or Item Level.
    1. Warehouse: go to Administration -> Setup -> Stock Management -> Warehouses, choose the WH you use in this case and on the Accounting tab fill the Sales Credit Account.
    2. Item Group: go to Administration -> Setup -> Stock Management -> Item Groups, choose the Item Group of the item on your Credit Note and on the Accounting tab fill the Sales Credit Account.
    3. Item Level: in Item Master data -> Stock Data tab fill out the Sales Credit Account column. If you don't have this column, go to Form Settings and make it visible there.

  • Credit Memo Posting key

    Hello every one,
    Can some one gave me the exactly posting keys used for Credit Memo document?
    I know the following  Credit Memo Posting key:
    11 for Customer document
    21 for Vendor document
    ?  Assets document
    ?  GL Acounts document
    ? Material Document
    Please don't hesitate to inform me, if you can....
    Ouail.

    Thank u Very Much Vera, it was helpful.
    I have a another question in tax Reporting:
    In the tax code in reporting, can you tell me witch line (in example below) get the priority in reporting ?
    Item = 1 and item = 2 ?
    OR
    Item = 2 and item = 3 ?
    We have to based on the field transaction(mws/vst)? if yes -> who get the priority ? mws or vst?
    Tax code:
    TR -->     Transfer to other EU country
    TX-->      acq of stock in DE
    Transaction:
    MWS-->
    Output Tax
    VST-->
    Input Tax
    WIA1-->
    Input Tax Dest. Ctry
    WIA2-->
    Output Tax Dep. Ctry
    WIA3-->
    Output Tax Dest.Ctry
    Thank u.
    Ouail.

  • BAI2 Lockbox Issue-Credit memo posting

    When a credit memo (Document found) is processed through the
    lockbox, the payment amount/residual amount is calculating incorrectly.
    The check is posting on account. The issue is visible during post-
    processing (FLB1)
    For example, if the credit memo is -$4428, the residual amount is
    showing as 4,428.00. This should be zero since the record is contained
    in the BAI2 file as shown below:
    401800560101962934 00000000000000442800
    Another way of looking at this issue is that the payment amount is
    showing as -$8,856 rather than as -$4428.
    We are not using reason codes.

    We are on version SAP ECC 6.0. The credit information is in the right 10 characters of the amount field (DDAMT) in the FLB24 structure.
    PYAMT     PYAMT_FLB2     NUMC     10     0     Payment Amount
    DDAMT     DDAMT_FLB2     NUMC     10     0     Deduction amount
    The check contains 4 documents all of which are found and the amounts are matching. The first "4" record is the credit memo. The other 3 invoices are regular payments. The check total processes and posts on account at the correct value.
    401800560102934            00000000000000440000
    401800560204209            00070000000000000000
    401800560304212            00030000000000000000
    401800560494211            00045000000000000000
    The check amount is for 140,600.00
    When post-processing, the invoices are listed and the payment amount shows as follows
    invoice#  Inv amt      payment amt
    2934       -4400         -8800
    4209      70000         70000
    4212      30000         30000
    4211     45000          45000
    My OSS note search has been unsuccessful thus far.

  • MIRO - Credit memo posted before invoice

    Hello,
    I have a problem with MIRO.
    User is able to introduce credit memo to purchase order even if there was no invoice yet.
    The strange thing is that when he introduce PO number in MIRO (credit memo) system issue a message __M8080 Reversal quantity greater than quantity invoiced to date__ and that is ok but after user will click on multi account assignment and get the same mesaage "Reverse qty greater than qty credited so far Message no. M8476" but after he close the pop up with account assignemnt and back to main screen there is no message M8080 any more and user is abl;e to post credit memo with negative quantity what finally issue ABAP  error DYNPRO_FIELD_CONVERSION
    Screen name.............. "SAPLMR1M"
    Screen number............ 6310
    Screen field............. "DRSEG-REMNG"
    Error text............... "FX015: Sign lost.".
    When I would like to display invoice (credit memo) in MIR4 or from ME23n history.
    But the main question is why system clears message M8080 after clik on multi account assignement.?
    Thanks in advance for your help.....
    Edited by: PG on Sep 2, 2011 10:19 AM

    Hi,
    THis is definetly a issue related to SAP Note.
    Try this SAP note in dev.
    Note 1332137 - MIR6/MIR4: Negative quantity with parked documents
    Summary
    Symptom
    You use transaction MIR4 (Display Invoice Document) or MIR6 (Invoice Overview) to post a parked credit memo with reference to a purchase order.
    You change the item quantity (MENGE) so that it is greater than the current invoice quantity (REMNG) and, without pressing "Enter", you immediately choose "Post". Even though the system executes the quantity check correctly, and error message M8 080 "Reversal quantity greater than quantity invoiced to date" is displayed in the message log, the system unexpectedly allows this credit memo to be posted.
    As a result, when you display or create invoice documents for this purchase order, the ABAP short dump DYNPRO_FIELD_CONVERSION occurs.
    Solution
    The Support Packages for Releases 4.70, 5.00, 6.00, 6.02, 6.03 and 6.04 correct this error.
    If you require an advance correction: Implement the correction instructions.
    Hope this will resolve your query,
    Regards,
    Sandesh Sawant

  • Problem in CRM Credit Memo replication into ECC.

    Dear all,
    I am Creating a Credit Memo from CRM Complaint transaction. Complaint is getting created and saved without any errors. But the same is not replicating in ECC.
    There are no errors in 'Transaction Error log', 'SMW01' and Inbound and Outbound Queues of both system. (SMQ1 and SMQ2)
    No trace at all where the problem is coming.
    The other functions like Return Request, Replacement and Substitute delivery are working fine within Same Complaint Transaction.
    I have maintained all settings as per C26 & C28 Best Practices Documentation.
    Still the problem exist. Request you to help me in resolving the issue. Your help will be highly appreciated
    Best regards
    Raghu ram
    Edited by: Raghu Ram on Jun 14, 2010 2:43 PM

    Hi,
    Whats the solution to this issue ? We are facing exactly the same issue
    Any relevant help is appreciated.
    Thanks,
    Ashish

  • Return delivery posting before Credit memo posting.

    Hi,
    I want to post a return delivery before to post the credit memo.
    How can I set up the system so that it will be possible ?
    Regards

    Is it a return delivery to vendor?
    Go to SPRO-MM-Inv Mgmt & Physical Inv -Goods receipt-For GR-Based IV, Reversal of GR Despite Invoice and tick against 122 movement type.
    You can post the material document and cancel the IR at a later time.
    Also read IMG documentation what it says.

  • Intrastat report Spain. Credit memos posted not appearing in report

    Hi
    I have a issue where the debit notes raised to vendor are not appearing in Intrastat  declaration.
    How this debit and credit notes must be taken by Intrastat ? This problem is there since the Intrastat  report is being used.
    Is there any specific configuration for this or
    is there any period check because of which the debit notes are not picked?
    The reason is po was created in Feb 2009 and continuous GR and invoice postings happened in subsequent months which are all captured in Intrastat  report. A debit note was raised in Sep 2009 which does not appear in the report.
    Request your expertise and help to resolve this issue.
    Thank you

    credit memos are not supported in SAP as you can read in docu:
    http://help.sap.com/saphelp_sbo2005ao/helpdata/en/F3/4392579F5DC24E9FBE2FA84E9E7660/frameset.htm
    Please read the local Intrastat guide, in many countries it just says that you have to file a correction per paper form to your statiscal office.
    SAP explains this as well in OSS note 374682:
    If a credit memo refers to a billing document which was already declared to authorities, proceed as follows:Here, you should create a written correction to the statistical office.Specify a data record to which the credit memo refers.
    Check the documents of the statistical offices for information on when you have to declare the credit memo (limits for values and quantities).*********************************************************************

  • A/R credit memo posting

    Hi Experts,
    I m trying to post A/R credit memo but error comes that G/L account is missing, i've checked the control accounts under accounting tab of business partner, it is ok, plz suggest me that what is missing or anything else need to edit?
    Regards
    Usha
    Edited by: usha.p on Jul 28, 2010 12:16 PM

    Hi Usha,
    Check whether the sales return account is mapped or not based on your gl method in item group or warehouse???
    Oops... sales credit account is what i meant too!!
    Thanks,
    Joseph
    Edited by: Joseph Antony on Jul 28, 2010 4:07 PM

Maybe you are looking for